MT27, 27th International Conference on Magnet Technology

Session

TUE-PO1-506 Superconducting Rotating Machines, Linear Machines, and Related Subjects I

506

16 Nov 2021, 13:15

Fukuoka Convention Center

1001. Comparative Design Study of HTS Synchronous Motor with Inner and Outer Rotor Type Based on Multi-Objective Optimization (TUE-PO1-506-02)

Dr Seok-Won Jung (Seoul National University)

16/11/2021, 13:15

Poster

In many industrial applications, there has been a growing need for electrical motors having high performance such as high power density and high efficiency. An electrical motor with high temperature superconducting (HTS) coils allows to offer those advantages due to the very high current density compared with conventional superconducting motors. HTS motors can be divided into an inner rotor...

506. Comparative Study of MW class Superconducting Machines according to Shielding and Electromagnetic Structures Based on Analytical Method (TUE-PO1-506-03)

Kyung-Hun Shin (Chonnam National University), Tae-Kyoung Bang (Republic of Korea /Chungnam National University)

16/11/2021, 13:15

Poster

The concept of an electric aircraft and ship implies the development of an entirely new electric propulsion system. Among the key technologies of these systems, electric motors and generators are required for high performances such as high efficiency and high specific power. In this paper, a study on the electromagnetic design of the MW class superconducting (SC) machine according to...

521. Design and Analysis of a Revolving Armature type Axial Flux High-Temperature Superconducting Motor (TUE-PO1-506-05)

Jun-Yeop Lee (Changwon national university)

16/11/2021, 13:15

Poster

Recently, as interest in high-efficiency motors has increased, motors of various structures have been developed. In particular, the axial flux motor has a relatively low leakage flux, so the power density, output torque, and efficiency are high. High-temperature superconducting (HTS) coils have a higher magnetic flux density than permanent magnets. Therefore, by applying HTS coil to the...

589. Design and Preliminary Experiments of Rotating Armature Partial Superconducting Air Core Generator (TUE-PO1-506-04)

Han-Wook Cho (Chungnam National University)

16/11/2021, 13:15

Poster

Since the late 2000s, research on electric turbo engine propulsion aircraft is being actively conducted in the aircraft industry to reduce environmental pollution and increase energy use efficiency. The electric propulsion aircraft will be equipped with a large-capacity, high-power density electric motor and generator with superconducting technology. In order to develop superconducting...

59. Experimental test and characteristic analysis of a real scale HTS coil for 10 MW HTS generator using performance evaluation system (TUE-PO1-506-06)

Changhyun Kim (Changwon National University)

16/11/2021, 13:15

Poster

Large-scale high temperature superconducting (HTS) wind power generators suffer from the high electromagnetic force and high torque due to their high current density and low rotational speed. Therefore, to maintain the mechanical strength of the HTS coil, the torque and Lorentz force of the HTS wind power generator must be carefully investigated. This paper deals with the experimental test...

767. Numerical Analysis of 2 MW Fully Superconducting Synchronous Motor for Electric Aircraft Considering AC Loss in Field Winding (TUE-PO1-506-08)

Kazane Matsumoto

16/11/2021, 13:15

Poster

The distributed electric propulsion system with superconducting synchronous motors with lightweight and high power density is a promising technology to reduce CO2 emissions. REBa2Cu3Oy (RE = Y, Eu, Gd, etc., REBCO) superconducting tapes have an advantage of higher critical current density even in high magnetic field at a liquid nitrogen temperature. Then fully superconducting motors with...

998. Numerical Prediction of HTS Closed Coil Current Decay for Synchronous Motor Application (TUE-PO1-506-09)

Yao Zhai (Southwest Jiaotong University)

16/11/2021, 13:15

Poster

2G high temperature superconducting (HTS) coil working in persistent current mode (PCM) has shown a superior potential in linear motor applications. While due to the external magnetic field, specifically, the harmonic field component generated by the ground coils, the HTS coil used in synchronous motor suffers inevitable current decay resulting from dynamic resistance, which is usually much...

342. Preliminary Rotational Test of an HTS Synchronous Motor with Linear-Motor Type Flux Pump Exciters (TUE-PO1-506-10)

Mr Run Long (Sichuan University)

16/11/2021, 13:15

Poster

This paper deals with the fabrication and preliminary rotational test of an high-temperature superconducting (HTS) synchronous motor with linear-motor type flux pump exciters. This HTS synchronous motor is composed of copper armature windings, HTS field windings, linear-motor type flux pump exciters, vacuum chamber, cryogenic cooling system, etc.The various core components were manufactured,...

316. Thermal-Electromagnetic Coupled Analysis Considering AC Losses in REBCO Windings at 65 K of 10 MW Fully-Superconducting Synchronous Generators for Electric Aircraft (TUE-PO1-506-11)

Hiromasa Sasa (Kyushu University)

16/11/2021, 13:15

Poster

To prevent global warming, CO2 emission by aircrafts is required reduction. For that purpose, the electric propulsion system is focused on as a promising technology. That system enables the aircraft to adopt distributed propulsors which have a great advantage from the viewpoint of aerodynamics. That system contains rotating machines; however, the conventional ones cannot satisfy the stringent...