-
Mr Ji-Sol Jeong (Chosun University)18/11/2021, 10:00Poster
The DC fault current does not naturally generate zero-point, so it generates a large arc when cut-off operation. If it is failure to quickly extinguish the arc generated at the moment, lead to fire and equipment damage. Therefore, we proposed a fast and reliable transformer-type superconducting DC circuit breaker. The transformer-type superconducting current limiting elements are highly and...
Go to contribution page -
Haowen Zheng (Huazhong University of Science and Technology)18/11/2021, 10:00Poster
Abstract—The superconducting current limiter has the advantages of small on-state loss, fast fault response speed, and strong current flow capacity. It can quickly limit the short-circuit fault current in the power system and protect the safety of power equipment. Superconducting current limiters can be divided into resistive current limiters, inductive current limiters and hybrid current...
Go to contribution page -
Prof. Tae-Hee Han (Jungwon University), Prof. Seok-Cheol Ko (Kongju National University), Sung-Hun Lim (Soongsil University)18/11/2021, 10:00Poster
Three-phase transformer type superconducting fault current limiter (SFCL) using two superconducting module (SM)s between secondary windings, which consisted of three-phase transformer windings wound on three legs of E-I iron core and two SMs connected between secondary windings, were suggested and its fault current limiting fault current limiting and recovery characteristics using double...
Go to contribution page -
Mr Geon-woong Kim (Chosun University)18/11/2021, 10:00Poster
DC Interruption technology is essentially required as DC system and microgrid have increased. The Interruption technology also includes current-limiting technology, and it is suppressed the fault current that rises when the fault current occured. Until now, many hybrid Interruption technologies have been proposed in which a semiconductor element or a superconducting element is combined with a...
Go to contribution page -
Prof. Ho Ik Du (Jeonbuk National University)18/11/2021, 10:00Poster
Among the current limiters whose performances were proved, there are many current limiters wherein their unique electrical characteristics are combined. Of these, the SFCL that uses coil and core are combined with a superconducting current limiting element and has a unique current limiting performance. Its applicability as a SFCL was proved. Especially, the initial current limiting operating...
Go to contribution page -
Zheng Li18/11/2021, 10:00Poster
Among the short-circuit fault current limiting devices in shipboard medium voltage dc-based integrated power system (MVDC IPS), hybrid-type superconducting fault current limiter (H-SFCL) has unique advantages. However, the H-SFCL prototype has to work under normal condition of 10kV/5kA and limit the short-circuit current of nearly 100kA in shipboard IPS, so it must have large current-carrying...
Go to contribution page -
Jiahui Zhu (China Electric Power Research Institute)18/11/2021, 10:00Poster
The level of fault current increases as urban power grid expands rapidly in recent years. The traditional relay protection has difficulty in preventing increasing fault current damaging electrical devices in power grid. Magneto-biased superconducting fault current limiter (SFCL) is a novel technology with the ability of reducing the level of fault current in the first half of the cycle, which...
Go to contribution page -
Prof. Seok-Cheol Ko (Kongju National University), Prof. Tae-Hee Han (Jungwon University), Prof. Sung-Hun Lim (Soongsil University)18/11/2021, 10:00Poster
In this paper, DC fault current limiting characteristics of the flux-lock type superconducting fault current limiter (SFCL) with parallel and series connection between two coils were analyzed.
Go to contribution page
The flux-lock type SFCL with parallel connection between two coils was composed of two windings connected in parallel and one superconducting module (SM), which was connected in series with the... -
Zheng Li18/11/2021, 10:00Poster
As medium voltage dc-based (MVDC) technology is widely considered in the shipboard integrated power system (IPS), the short fault protection of shipboard IPS is urgent. Superconducting fault current limiter (SFCL) is an efficient way to solve the short fault problems in shipboard MVDC IPS. A hybrid type SFCL (H-SFCL) based on a non-quenching inductor and two resistors have been developed in...
Go to contribution page -
Sung-Hun Lim (Soongsil University), Prof. Seok-Cheol Ko (Kongju National University), Prof. Tae-Hee Han (Jungwon University)18/11/2021, 10:00Poster
Three-phase transformer type superconducting fault current limiter (SFCL) using secondary windings with closed loop, which consisted of three-phase transformer windings wound on three legs of E-I iron core and two/three superconducting modules (SCMs), were suggested and its fault current limiting operations according to ground-fault types were analyzed. To verify the effective operation of the...
Go to contribution page -
Mr Zhenming Cai (Huazhong University of Science and Technology)18/11/2021, 10:00Poster
The application scenario of Hybrid type superconducting fault current limiter (H-SFCL) is the ship DC system. Therefore, the superconducting coil works in low frequency environment. The use of iron core can effectively reduce the tapes consumption, help to reduce the end leakage magnetic field, and reduce the AC loss of the superconducting coil in operation. When designing a superconducting...
Go to contribution page
Choose timezone
Your profile timezone: