TWEPP 2021 Topical Workshop on Electronics for Particle Physics

Material Package

Added Since

Include only attachments uploaded after this date

Include*

Everything

Specific sessions

Specific contributions

Specific days

Sessions*

Posters Optoelectronics and Links

Posters Trigger

Posters Radiation Tolerant Components and Systems

Posters Programmable Logic, Design Tools and Methods

Posters Production, Testing and Reliability

Posters Power, Grounding and Shielding

Posters Packaging and Interconnects

Posters ASIC

Posters Systems, Planning, Installation, Commissioning and Running Experience

Poster session

Posters

Closing

Introduction

Trigger

Radiation Tolerant Components and Systems

Programmable Logic, Design Tools and Methods

Production, Testing and Reliability

Power, Grounding and Shielding

Packaging and Interconnects

Optoelectronics and Links

ASIC

Systems, Planning, Installation, Commissioning and Running Experience

Include materials from selected sessions

Contributions*

2 ps rms Jitter Analog PLL Running at 2.56 GHz in 130nm CMOS Technology (in session "Posters ASIC")

2.56 Gbps CML transceiver for the data concentrator ASIC (in session "Posters ASIC")

40 Gbps optical transceiver for particle physics experiments (in session "Optoelectronics and Links")

48V input rad-hard DCDC converters for HEP experiments: development and results (in session "Power, Grounding and Shielding")

A 3D FPGA Track Segment Seeding Engine Based on the Tiny Triplet Finder (in session "Trigger")

A CMS Level-1 Track Finder for the HL-LHC (in session "Trigger")

A complete readout system for the CGEM detector (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

A Dual-mode NRZ/PAM4 Transmitter IP Purposed for Advanced CMOS Technology Nodes (in session "Posters ASIC")

A Family of Transient Recorder ASICs for Detector Readout (in session "Posters ASIC")

A flexible and low-cost open-source IPMC mezzanine for ATCA boards based on OpenIPMC (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

A Four-Channels Front End Electronics for ATLAS Muon-Drift-Tubes Detectors in 65nm CMOS Technology (in session "Posters ASIC")

A Generic Streaming Data Acquisition System for High-energy Physics Experiments (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

A low power clock generator 400-1800 MHz for ADPLL (in session "Posters ASIC")

A modular and flexible data acquisition system for a cosmic rays detector network (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

A precision Time of Flight measurement system for the TORCH prototype detector (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

A prototype optical link board with redundancy design for the ATLAS Liquid Argon Calorimeter Phase-2 Upgrade (in session "Optoelectronics and Links")

A radiation tolerant 12 bits, 160 MS/s data conversion and transmission ASIC for the CMS electromagnetic calorimeter (in session "ASIC")

A radiation-tolerant clock generator for the CMS Endcap Timing Layer readout chip (in session "Posters ASIC")

A Sub-Picosecond Digitally-Controlled Phase Delay (in session "ASIC")

A system test platform for the CERN power converter control electronics (in session "Posters Production, Testing and Reliability")

ATLAS LAr Calorimeter Commissioning for LHC Run-3 (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Augmenting Quality and Throughput of Functional Testing and Device Characterization for the ABCStar ATLAS-ITk Strips Readout ASIC Through a Semiconductor Test Industry Partnership (in session "Production, Testing and Reliability")

Automated firmware generation and continuous testing for the CMS HGCAL trigger primitive generator (in session "Programmable Logic, Design Tools and Methods")

Blade-board for stability studies of the slow-control functionality of the CMS muon DT uTCA backend (in session "Posters Production, Testing and Reliability")

Certification of the amplifier-shaper-discriminator ASICs produced for the ATLAS MDT chambers at the HL-LHC (in session "Posters ASIC")

CIC2: a radiation tolerant 65nm data aggregation ASIC for the future CMS tracking detector at LHC (in session "Posters ASIC")

Closing (in session "Closing")

CMS HCAL VTRx-induced communication loss and mitigation (in session "Optoelectronics and Links")

CMS Muon Drift Tubes HL-LHC Slice Test (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

CMS Phase-2 data acquisition, clock distribution, and timing: prototyping result and perspectives (in session "Systems, Planning, Installation, Commissioning and Running Experience")

DAMIC-M electronics and acquisition system (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Description and status of the EMCI-EMP interface (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Design and qualification of the Mu2e electromagnetic calorimeter radiation monitor system (in session "Radiation Tolerant Components and Systems")

Design and testing of a long Flexible Printed Circuit for the ATLAS High Granularity Timing Detector (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Design of a IoT based multi-channel temperature monitoring system (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Design, Production, Burn-in and Tests of the hybrid circuits of the Upstream Tracker at the LHCb detector (in session "Production, Testing and Reliability")

Detection Performance of MIMOSIS-1, a CMOS Sensor Prototype Developed for the CBM-MVD (in session "ASIC")

Development of a 20 Gbps PAM4 Data Transmitter ASIC for Particle Physics Experiments (in session "Posters ASIC")

Development of a high bandwidth readout chain for the CMS Phase-2 pixel upgrade (in session "Posters Optoelectronics and Links")

Development of AC-LGADs for high-rate Particle Detection (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Development of the ATLAS Liquid Argon Calorimeter Readout Electronics for the HL-LHC (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Development of the probe station for the hybrid assemblies of the European XFEL camera AGIPD (in session "Posters Production, Testing and Reliability")

Developments on Radiation-Hard Silicon Photonic Devices towards Integrated Transmitters for High Energy Physics (in session "Posters Optoelectronics and Links")

DIAMASIC: A multichannel front-end electronics for high-accuracy time measurements for diamond detectors (in session "Posters ASIC")

Easy and structured approach for software and firmware co-simulation for bus centric designs (in session "Posters Programmable Logic, Design Tools and Methods")

Electronics Integration for the GE2/1 and ME0 GEM Detector Systems for the CMS Phase-2 Muon System Upgrade (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Event driven readout system with non-priority arbitration for radiation detectors (in session "Posters ASIC")

Experimental characterisation of the RD50-MPW2 High Voltage-CMOS sensor chip (in session "Posters ASIC")

FAST2: a new family of front-end ASICs to read out thin Ultra-Fast Silicon detectors achieving picosecond time resolution. (in session "ASIC")

FastIC: A Fast Integrated Circuit for the Readout of High Performance Detectors (in session "Posters ASIC")

FELIX: the new ATLAS readout system from Run 3 to High Luminosity LHC (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Firmware Architecture of the back-end DAQ system for the CMS High Granularity Endcap Calorimeter detector. (in session "Posters Programmable Logic, Design Tools and Methods")

First experimental results with the version TOFHIR2X of the front-end ASIC of the MTD/BTL detector in the CMS experiment (in session "ASIC")

First Measurement on TimeSPOT1 ASIC: a Fast-Timing, High-Rate Pixel-Matrix Front-End (in session "ASIC")

FPGA implementation of RDMA for ATLAS Readout with FELIX in High Luminosity LHC (in session "Programmable Logic, Design Tools and Methods")

FPGA-based real-time data processing for accelerating reconstruction at LHCb (in session "Trigger")

Front-end hybrid designs for the CMS Phase-2 Upgrade towards the production phase (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Frontend and backend electronics for the ATLAS New Small Wheel Upgrade (in session "Production, Testing and Reliability")

Fully-integrated set-up for gate current characterization in 28nm CMOS technology (in session "Posters Radiation Tolerant Components and Systems")

Hardware Design of the Generic Rear Transition Module for Global Trigger System of the ATLAS Phase II Upgrade (in session "Posters Trigger")

Hermes - A robust, low latency, optical link protocol for synchronous data transfer at commercial asynchronous line rates (in session "Posters Optoelectronics and Links")

HGCROC3: the front-end readout ASIC for the CMS High Granularity Calorimeter (in session "ASIC")

High precision scalable power converter for accelerator magnets (in session "Posters Power, Grounding and Shielding")

High-accuracy 4D particle trackers with Resistive Silicon Detectors (AC-LGADs) (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Hog: handling HDL repositories on git (in session "Programmable Logic, Design Tools and Methods")

Hough-transform-based FPGA track processor for the ATLAS experiment at CERN (in session "Programmable Logic, Design Tools and Methods")

Hybrids Acceptance Tools for the CMS Phase Two Tracker Upgrade (in session "Production, Testing and Reliability")

Implementation and testing of Design For Testability methodologies in 65 nm ASICs for HL-LHC. (in session "ASIC")

Installation, integration and first operating experiences of the ALICE ITS Upgraded Readout System (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Integration and commissioning of the ATLAS Muon-to-Central-Trigger-Processor Interface for Run-3 (in session "Trigger")

Introduction (in session "Introduction")

Investigation of Radiation-Induced Effects in a Front-end ASIC designed for Photon Counting Sensor Systems (in session "Posters Radiation Tolerant Components and Systems")

Irradiation of VFAT3: A 128-channel charge-sensitive front-end chip for the CMS GEM phase-2 upgrade (in session "Posters Radiation Tolerant Components and Systems")

Isolated USB Programmer for LpGBT (UPL) for the ATLAS-HGTD upgrade (in session "Posters Programmable Logic, Design Tools and Methods")

Low dose rate irradiation of the RD53A chip with Kr-85 beta source (in session "Radiation Tolerant Components and Systems")

Low Noise Charge Sensitive Amplifier - ASIC with Adaptive Gain Setting and Active Reset (in session "Posters ASIC")

Machine Learning for Real-Time Processing of ATLAS Liquid Argon Calorimeter Signals with FPGAs (in session "Posters Programmable Logic, Design Tools and Methods")

Monolithic pixel sensor with 25µm x 35µm pixel size and high time resolution implemented in 180nm technology (in session "Posters ASIC")

New Generation RCE system for the Rd53 Pixel Front End chip readout (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Onchip digital calibrated 2mW 12b SAR ADC with reduced input capacitance (in session "Posters ASIC")

PAM-4 implementation study for future high-speed links (in session "Programmable Logic, Design Tools and Methods")

PANDORE: an environmental box for ITk integration tests. (in session "Posters Production, Testing and Reliability")

Performance and Plans for Production of the Powerboard for ATLAS ITk Strip Barrel Modules (in session "Posters Production, Testing and Reliability")

Performance simulations and characterization of RD53 pixel chips for ATLAS and CMS HL-LHC upgrades (in session "ASIC")

Power, Readout and Service Hybrids for the CMS Phase-2 Upgrade (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Precision luminosity measurement at CMS with the Pixel Luminosity Telescope (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Precision timing ASIC for LGAD sensors based on a Constant Fraction Discriminator – FCFD0 (in session "ASIC")

Progress report on the online processing upgrade at the NA62 experiment (in session "Posters Trigger")

Proton Sound Detector for Beam Range Measurement in FLASH Hadron Therapy (in session "Posters Programmable Logic, Design Tools and Methods")

Prototype Design of Timing and Fast Control in the CBM experiment (in session "Systems, Planning, Installation, Commissioning and Running Experience")

QEMU-based hardware/software co-development for DAQ systems (in session "Posters Programmable Logic, Design Tools and Methods")

QTIA, a 2.5 or 10 Gbps 4-Channel Array Optical Receiver ASIC in a 65 nm CMOS Technology (in session "Posters ASIC")

Radiation hard TwinAx for ATLAS ITk pixel electrical data transmission (in session "Posters Optoelectronics and Links")

Radiation hardness and timing performance in MALTA monolithic Pixel sensors in TowerJazz 180 nm (in session "Radiation Tolerant Components and Systems")

Radiation hardness of the ITkPixV1 and RD53A chips (in session "Posters ASIC")

Readiness of the radiation tolerant link Daughterboard for the High Luminosity upgrade of the ATLAS Hadronic Calorimeter (in session "Posters Radiation Tolerant Components and Systems")

Readout electronics for the CMS Phase II Endcap Calorimeter: system overview and prototyping experience (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Recent results from the first lpGBT-based prototype of the End-of-Substructure card for the ATLAS Strip Tracker Upgrade (in session "Systems, Planning, Installation, Commissioning and Running Experience")

rPOL2V5: a compact radiation-hard resonant switched-capacitor DC-DC converter for the CMS HGCAL (in session "Power, Grounding and Shielding")

Serial powering and signal integrity characterisation for the TEPX detector for the Phase-2 CMS Inner Tracker (in session "Power, Grounding and Shielding")

Single Event Effects on the RD53B Pixel Chip Digital Logic and On-chip CDR (in session "Radiation Tolerant Components and Systems")

Smart Switch based High Voltage Distribution System for Mu2e Electron Tracker (in session "Posters Power, Grounding and Shielding")

SMX and front-end board tester for CBM readout chain (in session "Posters Production, Testing and Reliability")

SRS-based Timepix3 readout system (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Successive Approximation Register ADC Single Event Effects Protection and Evaluation (in session "Posters Radiation Tolerant Components and Systems")

TEPX as a high-precision luminosity detector for CMS at the HL-LHC (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Test of Low-Dropout voltage regulators with neutron and protons (in session "Posters Radiation Tolerant Components and Systems")

Test poster (in session "Posters Trigger")

Test results of RD53B chips for ATLAS and CMS phase-2 pixel upgrades (in session "ASIC")

Test system for the Service Hybrid of the 2S Module for the CMS Phase-2 Outer Tracker Upgrade (in session "Posters Production, Testing and Reliability")

The Apollo ATCA design for CMS Track Finder and Pixel Readout at the HL-LHC (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The ATLAS Electron Feature Extractor Module: Design, Manufacture and Test (in session "Posters Trigger")

The Caribou DAQ System – Current Status and Ongoing Developments (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

The charge sensitivity calibration of the upgraded ALICE Inner Tracking System (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

The CMS Barrel Calorimeter Processor demonstrator (BCPv1) board evaluation (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The CMS HGCAL Silicon Region Architecture Specification and Optimisation (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The CMS Inner Tracker electronics system development and tests (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The ETROC1: The first full chain precision timing prototype for CMS MTD Endcap Timing Layer (ETL) upgrade (in session "ASIC")

The Fast Beam Condition Monitor as a standalone luminometer of the CMS experiment at the HL-LHC (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

The Front End and Trigger Unit for an Analogue Transient Recorder ASIC (in session "Posters ASIC")

The Gotthard-II readout ASIC and detector system (in session "ASIC")

The JUNO experiment and its readout electronics system (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The lpGBT production testing system (in session "Production, Testing and Reliability")

The MDT Trigger Processor development for the ATLAS Level-0 Muon Trigger at HL-LHC (in session "Posters Trigger")

The Microstrip Silicon Detector (MSD) data acquisition system for the FOOT experiment (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

The Mu3e Detector (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The NA62 liquid krypton electromagnetic calorimeter fast readout implementation and data taking performances (in session "Posters Trigger")

The new waveform digitizer (DIRAC-V2) for the Mu2e electromagnetic calorimeter at Fermilab (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

The Ocean and Octopus designs for the Phase-2 upgrade of the CMS L1 muon trigger (in session "Trigger")

The Prototype Hardware Design and Test of Global Common Module for Global Trigger System of the ATLAS Phase II Upgrade (in session "Trigger")

The radiation-hard low-Voltage LDO for HGCAL in the CMS Phase-2 upgrade (in session "Radiation Tolerant Components and Systems")

The Scalable Readout System as a common initiative - a personal review (in session "Systems, Planning, Installation, Commissioning and Running Experience")

The TileCal TDAQ interface module for the Phase II Upgrade of the ATLAS Tile Calorimeter (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

The Versatile Link+ Demo Board (VLDB+) (in session "Posters Optoelectronics and Links")

Towards a Software-Adaptable Receiver Chain for Particle Detectors (in session "Posters ASIC")

Towards Optical Data Transmission for High Energy Physics Using Silicon Photonics (in session "Optoelectronics and Links")

Towards the next generation of CERN radiation monitoring front end ASICs (in session "ASIC")

Ultra-low jitter clock distribution for the trigger electronics of the ATLAS New Small Wheel experiment. (in session "Posters Trigger")

Upgrade of the ATLAS Tilecal High Voltage system (in session "Posters Power, Grounding and Shielding")

Upgrade of the CMD-3 trigger system. (in session "Posters Trigger")

Upgrade of the RPC detectors’ data collection and transmission electronics for the ATLAS experiment at High Luminosity LHC (in session "Systems, Planning, Installation, Commissioning and Running Experience")

Verification methodology of a multi-mode radiation-hard high-speed transceiver ASIC (in session "Posters ASIC")

Verification of ATLAS detector readout with FPGA-based front-end emulator (in session "Posters Programmable Logic, Design Tools and Methods")

Versatile free-running ADC-based data acquisition system for particle detectors (in session "Posters Programmable Logic, Design Tools and Methods")

ZynqMP-based board-management mezzanines for Serenity ATCA-blades (in session "Posters Systems, Planning, Installation, Commissioning and Running Experience")

Include materials from selected contributions

Events scheduled on*

20/09/2021

21/09/2021

22/09/2021

23/09/2021

24/09/2021

Include materials from sessions/contributions scheduled on the selected dates