Login

Workshop on Nb3Sn Rutherford cable characterization for accelerator magnets

Nov 16 – 17, 2017
CIEMAT, Madrid
Europe/Zurich timezone

Contribution List

24 out of 24 displayed
Export to PDF
  1. 1. Introduction
    Pierre Manil (Université Paris-Saclay (FR))
    11/16/17, 5:15 PM
  2. 2. Nb3Sn accelerator magnet development in US
    Soren Prestemon (LBNL)
    11/16/17, 5:30 PM
  3. 3. Nb3Sn accelerator magnet development in Asia
    Toru Ogitsu
    11/16/17, 6:00 PM
  4. 24. Nb3Sn accelerator magnet development in Europe
    Gijs De Rijk (CERN)
    11/16/17, 6:30 PM
  5. 14. Mechanical tests setup in CEA Saclay
    Maria Durante
    11/17/17, 8:30 AM
  6. 15. Measurement devices for 10 stacks mechanical characterization at room and 77K temperature
    Claudio Fichera (CERN), Michael Guinchard (CERN)
    11/17/17, 9:00 AM
  7. 13. Mechanical behavior of MQXF cable stacks at room temperature
    Claudio Fichera (CERN)
    11/17/17, 9:30 AM
  8. 12. Mechanical characterisation of Nb3Sn impregnated coils – Compression properties
    Jose Luis Rudeiros Fernandez (CERN)
    11/17/17, 10:30 AM
  9. 23. Uncertainties in the measurement of the mechanical properties of Nb3Sn coil constituents and cable stacks
    Christian Scheuerlein (CERN)
    11/17/17, 11:00 AM
  10. 22. Mechanical simulation of MQXF coils
    Giorgio Vallone (CERN)
    11/17/17, 11:30 AM
  11. 21. Measurements and modelling of mechanical properties of Nb3Sn strands and cables at FNAL
    Emanuela Barzi (FNAL)
    11/17/17, 12:00 PM
  12. 4. LBNL studies about dimensional changes during heat treatment
    Soren Prestemon (LBNL)
    11/17/17, 2:00 PM
  13. 5. Measurement technique for longitudinal dimensional changes of Nb3Sn conductor due to the reaction heat treatment
    Matthias Michels (CERN)
    11/17/17, 2:45 PM
  14. 6. Dimensional changes of Nb3Sn Rutherford cables during heat treatment
    Etienne Rochepault (CERN)
    11/17/17, 3:15 PM
  15. 7. Cable insulation parameters and dimensional change in HQ, QXF, and TAMU3
    Eddie Holik (Fermilab)
    11/17/17, 4:15 PM
  16. 20. FRESCA2 and CEA set-up
    Maria Durante
    11/17/17, 4:45 PM
  17. 16. Wrap-up
    Pierre Manil (Université Paris-Saclay (FR))
    11/17/17, 5:15 PM
  18. 18. Summary Session 2
    Helene Felice (Université Paris-Saclay (FR)), Bernardo Bordini (CERN)
    11/17/17, 5:25 PM
  19. 19. Summary Session 3
    Paolo Ferracin (CERN), Friedrich Lackner (CERN)
    11/17/17, 5:50 PM
  20. 17. Close-out
    Pierre Manil (Université Paris-Saclay (FR))
    11/17/17, 6:15 PM
  21. 11. Speaker 10
  22. 8. Speaker 7
  23. 9. Speaker 8
  24. 10. Speaker 9