DAQ/FEE/Trigger for COMPASS beyond 2020 workshop

Europe/Prague
CTU FNSPE Prague

CTU FNSPE Prague

Trojanova 13 Praha 2 120 00
Igor Konorov (Technische Universitaet Muenchen (DE)), Jan Hrusovsky (Czech Technical University (CZ)), Josef Novy (Czech Technical University (CZ)), Ondrej Subrt (Czech Technical University (CZ))
Description

This workshop is focused on development needed for COMPASS beyond 2020. We will discuss required performance and architecture of FEE and DAQ components, unify serial interfaces and protocols, discuss trigger processor hardware, and distribution of workload. One of the topics will be also development of Si detector systems for polarized target. More info can be found at workshop web page 

Participants
  • Alexander Nagaytsev
  • Andrzej Rychter
  • Antonin Kveton
  • Benjamin Moritz Veit
  • Caroline Kathrin Riedl
  • Cathrina Sowa
  • Daniel Duda
  • Dominik Steffen
  • Fritz-Herbert Heinsius
  • Gianni Mazza
  • Giulio Dellacasa
  • Gleb Meshcheriakov
  • Igor Konorov
  • Jan Hrusovsky
  • Jan Matousek
  • Josef Novy
  • Kamil Augsten
  • Maksym Protsenko
  • Marketa Peskova
  • Markus Joos
  • Martin Bodlak
  • Martin Zemko
  • Matous Jandek
  • Maxim Alexeev
  • Michael Finger
  • Michael Pesek
  • Michela Chiosso
  • Miroslav Finger
  • Ondrej Subrt
  • Robert Pawel Kurjata
  • Sebastian Uhl
  • Vladimir Anosov
  • Vladimir Jary
Contact: Josef Nový
    • 8:00 AM 9:00 AM
      Registration 1h
    • 9:00 AM 10:20 AM
      Introduction
      Convener: Josef Novy (Czech Technical University (CZ))
      • 9:00 AM
        Welcome address 10m
        Speaker: Miroslav Finger (Charles University (CZ))
      • 9:10 AM
        COMASS DAQ : Where we are and where we want to go 20m
        Speaker: Igor Konorov (Technische Universitaet Muenchen (DE))
      • 9:30 AM
        COMPASS future physics program 25m

        The M2 beam line at CERN is a unique hadron and muon facility. COMPASS has submitted a proposal requesting the extension of the COMPASS-II program in and beyond 2021. A Letter of Intent will be submitted by the end of 2017 suggesting a rich physics program to explore hadron structure using conventional meson beams, muon beams, and finally RF-separated hadron beams to enhance the fraction of beam kaons and anti-protons.

        Speaker: Caroline Kathrin Riedl (Univ. Illinois at Urbana Champaign (US))
      • 9:55 AM
        Proton radius measurement 25m

        The measurement of the proton radius is part of the proposal for the future COMPASS program. While continuing to use the DAQ and trigger system in the current way appears to be feasible, improving in particular the trigger is desirable to increase the number of recorded elastic events. I will present some ideas to achieve this, along with presenting the requirements to the COMPASS set-up for a successful measurement.

        Speaker: Sebastian Uhl (Technische Universitaet Muenchen (DE))
    • 10:20 AM 10:50 AM
      Coffee break 30m
    • 10:50 AM 12:10 PM
      Trigger
      Convener: Josef Novy (Czech Technical University (CZ))
    • 12:10 PM 1:30 PM
      Lunch 1h 20m
    • 1:30 PM 2:45 PM
      FEE development
      • 1:30 PM
        Data filtering for calorimeters 25m
        Speaker: Marcin Ziembicki (Warsaw University of Technology (PL))
      • 1:55 PM
        Development in Saclay 25m
        Speaker: Damien Neyret (Université Paris-Saclay (FR))
      • 2:20 PM
        Alice ASIC for TPC 25m
        Speaker: Christian Lippmann (GSI - Helmholtzzentrum fur Schwerionenforschung GmbH (DE))
    • 2:45 PM 3:15 PM
      Coffee break 30m
    • 3:15 PM 4:45 PM
      FEE development
      • 3:15 PM
        INFN Torino Electronics Service 25m

        Electronics Service of the Turin section of INFN (Electronics Laboratory) fulfills all the requests made by different physics research groups providing both design, systems realization and test capabilities of discrete electronics and microelectronics devices.
        Design activities range from the very front-end electronics to the development of full read-out and data acquisition systems.
        Microelectronics design is one of the main activity of the Laboratory for the development of full-custom ASICs circuits. The team of IC designers has a long experience in analogue, mixed-mode or digital IC design.
        In addition the Electronics Laboratory provides design capabilities oriented to the implementation of Printed Circuit Boards (PCBs) and to digital programming techniques using Field Programmable Gate Arrays (FPGAs).
        This presentation gives a very short overview of all this activities, focusing on revelant projects and recent developments.

        Speaker: Giulio Dellacasa (Universita e INFN Torino (IT))
      • 3:40 PM
        Experience and developments in ASIC design at INFN Torino 25m

        The presentation will describe the ASIC design activities at INFN Torino, with special focus on the developments for hybrid and monolithic pixel detectors, for timing measurements and for high speed data transmission circuit. ASICs currently used in various applications (ALICE ITS, COMPASS RICH, GBT common interface and medical interface) will be described, togheter with the recent developments in timing applications and HL-LHC prototypes.

        Speaker: Gianni Mazza (Universita e INFN Torino (IT))
      • 4:05 PM
        Pico TDC 20m
        Speaker: Moritz Horstmann (CERN)
      • 4:25 PM
        MWPC read out 20m
        Speaker: Maxim Alexeev (Universita e INFN Torino (IT))
    • 6:00 PM 9:00 PM
      Conference dinner 3h
    • 9:00 AM 10:10 AM
      Status Overview
      Convener: Martin Bodlak (Charles University (CZ))
      • 9:00 AM
        Bus Crates, Shelfs at CERN 30m
        Speaker: Markus Joos (CERN)
      • 9:30 AM
        Current iFDAQ Software Status 40m

        The contribution presents development and recent status of the Data Acquisition Systems (DAQ) of the COMPASS experiment at CERN. It focuses especially on development and deployment of the new communication library DIALOG and DAQ Debugger for the error detection. The DIALOG library is a communication system both for distributed and mixed environments, it provides a network transparent inter-process communication layer. In general, state-of-the-art Data Acquisition Systems (DAQ) in high energy physics experiments must satisfy high requirements in terms of reliability, efficiency and data rate capability. In complex software, such as the DAQ, having thousands of lines of code, the debugging process is absolutely essential to reveal all software issues. The resultant DAQ stability is discussed at the end and comparison with previous years is given.

        Speakers: Ondrej Subrt (Czech Technical University (CZ)), Josef Novy (Czech Technical University (CZ))
    • 10:10 AM 10:30 AM
      Coffee break 20m
    • 10:30 AM 11:40 AM
      DAQ: Near future
      Convener: Martin Bodlak (Charles University (CZ))
      • 10:30 AM
        DAQ Software Interventions before 2018 Run 20m

        The preliminary schedule of DAQ changes before the Run 2018 has been already discussed and accepted. There are prepared two major interventions. The current DAQ is limited to event size up to 512 KB. First intervention gets rid of such event size restriction and provides with more general DAQ. Second intervention takes into account the integration of cross-point switch. It considers all aspects such as database, new slave control process and responsibilities of master process. Moreover, the contribution defines all allowed features in Topology GUI based on the current DAQ status from the user’s point of view. In the end, open questions rising from the cross-point switch integration are stated.

        Speaker: Ondrej Subrt (Czech Technical University (CZ))
      • 10:50 AM
        iFDAQ 20m
        Speaker: Dominik Steffen (Technische Universitaet Muenchen (DE))
      • 11:10 AM
        Command line interface 30m

        Having a graphical-only user interface to the DAQ has proven problematic in two matters: remote access and run control automation. This talk will address the current status of the command-line interface and describe how it solves these problems, including the “script mode“ feature introduced earlier this year. A short workshop session on how to write scripts against this interface will also take place during this talk. Finally, future plans will be discussed, especially the relationship of the command-line interface and the COMPASS API.

        Speaker: Antonin Kveton (Charles University (CZ))
    • 11:40 AM 1:00 PM
      Lunch 1h 20m
    • 1:00 PM 2:40 PM
      DAQ: Beyond 2020
      Convener: Ondrej Subrt (Czech Technical University (CZ))
      • 1:00 PM
        Future iFDAQ and FEE Architecture 20m
        Speaker: Igor Konorov (Technische Universitaet Muenchen (DE))
      • 1:20 PM
        COMPASS DAQ Beyond 2020 20m
        Speaker: Josef Novy (Czech Technical University (CZ))
      • 1:40 PM
        Discussion 1h
    • 2:40 PM 3:10 PM
      Coffe break 30m
    • 3:10 PM 4:15 PM
      DAQ: Until 2020
      Convener: Ondrej Subrt (Czech Technical University (CZ))
      • 3:10 PM
        COMPASS API 15m
        Speaker: Matous Jandek (Czech Technical University (CZ))
      • 3:25 PM
        DAQ Deployment Application 15m
        Speaker: Jan Hrusovsky (Czech Technical University (CZ))
      • 3:40 PM
        Event Size Display 15m
        Speaker: Martin Zemko (Czech Technical University (CZ))
      • 3:55 PM
        Support Tools 20m

        In our contribution, we present several tools that simplify work with data taking shifts at COMPASSS experiment at CERN. At first, we introduce online shift reservation tool. Administrator (or year coordinator) can use the tool to define list of shift for given data taking period. Members of the experiment use the tool to sign in for shifts according to their preferences. The tool automatically calculates served shifts for each institution, moreover concept of coefficients that rate different types of shifts (night, weekend) was introduced. In the second part of our talk, we present electronic checklist which would replace need to fill in paper forms. The shifter downloads form prepared by administrator into tablet, fills it in, and uploads the result. The application is able to work offline, moreover it verifies that all values are valid and within correct range. Both applications are prepared for deployment in the case they are approved.

        Speakers: Martin Bodlak (Charles University (CZ)), Vladimir Jary (Czech Technical University (CZ))
    • 9:00 AM 9:30 AM
      PANDA experiment 30m
      Speaker: Fritz-Herbert Heinsius (Ruhr-Universitaet Bochum (DE))
    • 9:30 AM 10:30 AM
      PT
      Convener: Miroslav Finger (Charles University (CZ))
      • 9:30 AM
        Letter of Intent on the Common R&D project to upgrade the COMPASS Polarized Target with Recoil Detectors (PT with RD) 30m
        Speaker: Alexander Nagaytsev (Joint Institute for Nuclear Research (RU))
      • 10:00 AM
        PID inside the COMPASS PT 30m
        Speaker: Gleb Meshcheryakov
    • 10:30 AM 11:00 AM
      Coffee break 30m
    • 11:00 AM 12:30 PM
      PT
      Convener: Miroslav Finger (Charles University (CZ))
      • 11:00 AM
        Proposal for a possible recoil tracker based on double side Si-microstrip detectors 30m
        Speaker: Alexander Nagaytsev (Joint Institute for Nuclear Research (RU))
      • 11:30 AM
        Activities of LTU for high energy physics experiments 30m
        Speaker: Maksym Protsenko (National Academy of Sciences of Ukraine (UA))
      • 12:00 PM
        Spin Physics Experiments at NICA-SPD 15m
        Speaker: Alexander Nagaytsev (Joint Institute for Nuclear Research (RU))