CERN
Author in the following contributions
- Tue-Af-Po2.18-01 [33]: Magnetic field design of a full-scale prototype of the HL-LHC beam separation dipole with a correction of mechanical deformation
- Thu-Mo-Po4.07-03 [48]: Magnetic Measurements of MQXFA Prototype Quadrupoles during Magnet Assembly
- Wed-Af-Po3.20-07 [60]: Vertical Magnetic Field Measurements of Full-Length Prototype MQXFAP Quadrupoles at Cryogenic Temperatures for Hi-Lumi LHC
- Wed-Af-Po3.17-08 [36]: Mechanical behaviour of the HL-LHC beam screen during a quench test campaign of the MQXF short model magnet
- Fri-Mo-Or25-02: Construction and Cold Test of the Superferric Skew Quadrupole for HL-LHC
- Tue-Af-Po2.18-03 [35]: HL-LHC D2 Short model recombination dipole cold test results and analysis
- Tue-Af-Po2.18-04 [36]: Design and performance of the quench protection heater for the HL-LHC beam separation dipole
- Thu-Mo-Or16-01 [Invited]: Status and Plans of the MQXFA Low Beta Quadrupoles for HL-LHC
- Thu-Mo-Or16-02: Assembly of MQXFBP1 prototype, the Nb3Sn Q2 quadrupole for HL-LHC
- Thu-Af-Or22-01: Improvement in training performance by enhancing coil end support of the Beam Separation Dipole for the High-Luminosity LHC
- Thu-Af-Or22-02: Test of the first full-length prototype of the HL-LHC D2 orbit corrector based on Canted Cosine Theta technology
- Thu-Af-Or22-04: Assembly and Test of MQYYM: a 90 mm NbTi quadrupole magnet option for HL-LHC
- Thu-Af-Or22-03: Cold tests of the first nested orbit corrector prototype for HL-LHC
