|
08:30
|
--- REGISTRATION ---
|
|
09:20
|
Opening welcome
-
Krzysztof Danilecki
Monika Lewandowska
(West Pomeranian University of Technology, Szczecin)
(until 09:30)
()
|
|
09:30
|
Session I
-
Arend Nijhuis
(University of Twente)
(until 10:30)
()
|
|
09:30
|
Heat transport in tilted stacks of HTS tapes at temperatures above 20K
-
Łukasz Tomków
(University of Cambridge)
()
|
|
10:00
|
Hydraulic characterization of conductor prototypes for fusion magnets
-
Monika Lewandowska
(West Pomeranian University of Technology, Szczecin)
()
|
|
10:30
|
--- Coffee break ---
|
|
10:50
|
Session I
-
Arend Nijhuis
(University of Twente)
(until 11:50)
()
|
|
10:50
|
Strand-Jacket Thermal Contact Resistance of REBCO Conductor Measured on Dummy Conductors
-
Rui Kang
()
|
|
11:20
|
Steady-state transverse heat transfer in a single channel CICC
-
Aleksandra Dembkowska
(West Pomeranian University of Technology, Szczecin)
()
|
|
11:50
|
Session II
-
Alfredo Portone
(Fusion For Energy/European Commission)
(until 12:50)
()
|
|
11:50
|
On the Mechanical Behavior of a Nb3Sn Superconducting Coil During a Quench: Three-Dimensional Finite Element Analysis of a Quench Heater Protected Quench
-
Jose Ferradas Troitino
(Universite de Geneve (CH))
()
|
|
12:20
|
LTS magnets electro-mechanical modelling taking into account magnetic iron forces
-
Douglas Martins Araujo
(CERN)
()
|
|
|
09:00
|
Session IV
-
Bertrand Baudouy
(CEA Paris-Saclay)
(until 10:30)
()
|
|
09:00
|
Adaptation of the nuclear safety code CATHARE3 to supercritical helium flow.
-
Sulayman Shoala
(CEA/DRF)
()
|
|
09:30
|
Simulation of a cryogenic capillary tube: thermodynamic behavior subjected to heat load.
-
Maria Barba
(CEA (Commissariat à l'Énergie Atomique))
()
|
|
10:00
|
An update of dynamic thermal-hydraulic simulations of the JT-60SA Cryogenic system for preparing plasma operation
-
François BONNE
(CEA)
()
|
|
10:30
|
--- Coffee break ---
|
|
10:50
|
Session IV
-
Bertrand Baudouy
(CEA Paris-Saclay)
(until 11:20)
()
|
|
10:50
|
Parametric study and optimization of the cryo-magnetic system for EU DEMO at the pre-conceptual design phase
-
Christine Hoa
(CEA,IRIG)
()
|
|
11:20
|
Session V
-
Dariusz Bocian
(Institute of Nuclear Physics Polish Academy of Sciences (Kraków, PL))
Monika Lewandowska
(West Pomeranian University of Technology, Szczecin)
(until 12:50)
()
|
|
11:20
|
Thermal analysis of AC loss heated Nb3Sn coil samples for the High Luminosity upgrade of the LHC.
-
Kirtana Puthran
(CERN)
()
|
|
11:50
|
Electro-thermal 1D model of the SIS100 superconducting dipole magnet.
-
Piotr Szwangruber
(GSI Helmholtzzentrum für Schwerionenforschung GmbH)
()
|
|
12:20
|
PSpice modeling of the inrush and fault currents in a 21 MVA HTS transformer.
-
Pawel Surdacki
(Lublin University of Technology)
()
|
|
|
08:55
|
Session VI
-
Sylvie NICOLLET
(CEA)
(until 10:00)
()
|
|
08:55
|
Fundamental description of Field Induced Josephson junctions and devices built on their base.
-
Krzysztof Pomorski
(University College Dublin)
()
|
|
09:25
|
FEM Modeling Of Multilayer Canted Cosine Theta (CCT) Magnets.
-
Rafal Ortwein / Przemyslaw Wachal
()
|
|
10:00
|
Session VII
-
Marco Breschi
(University of Bologna)
(until 10:30)
()
|
|
10:00
|
Analysis of quench in HTS conductors for fusion applications: a novel 1D thermal-hydraulic modeling approach.
-
Andrea Zappatore
(Politecnico di Torino)
()
|
|
10:30
|
--- Coffee break ---
|
|
10:50
|
Session VII
-
Reinhard Heller
(Karlsruhe Institute of Technology)
(until 12:20)
()
|
|
10:50
|
Study on conditions for successful quench protections of coils wound with coated conductors by short-sample experiments and quench simulations.
-
Naoyuki Amemiya
(Kyoto University)
()
|
|
11:20
|
Modelling of a 50 kA REBCO Conductor with Multi-strand Made by Twisted Stacked Tapes.
-
Rui Kang
()
|
|
11:50
|
Design and analysis of HTS subsize-conductors for quench investigations towards future HTS fusion magnets.
-
Michael Wolf
(Karlsruhe Institute of Technology (KIT))
()
|
|
|
07:45
|
--- Wendelstein 7-X tour ---
|
|
|
12:50
|
--- Lunch break ---
|
|
14:10
|
Session II
-
Alfredo Portone
(Fusion For Energy/European Commission)
(until 14:40)
()
|
|
14:10
|
Electro-Mechanical FE modeling of CORC® cable configurations based on bending experiments.
-
Arend Nijhuis
(University of Twente)
()
|
|
14:40
|
Session III
-
Sylvie NICOLLET
(CEA)
(until 15:40)
()
|
|
14:40
|
A-formulation method for full 3D FEM computation of the superconducting magnetization.
-
Mykola Soloviov
(Institute of Electrical Engineering Slovak Academy of Sciences )
()
|
|
15:10
|
Field Quality Analysis in the HTS Dipole Insert-Magnet Feather M2 with the Finite Element Method.
-
Lorenzo Bortot
(CERN)
()
|
|
15:40
|
--- Coffee break ---
|
|
18:00
|
--- Guided city walk ---
|
|
|
12:50
|
--- Lunch break ---
|
|
14:10
|
Session V
-
Monika Lewandowska
(West Pomeranian University of Technology, Szczecin)
Dariusz Bocian
(Institute of Nuclear Physics Polish Academy of Sciences (Kraków, PL))
(until 15:10)
()
|
|
14:10
|
1D and 2D finite-element approaches to extract the resistivity of the superconductor material from pulsed current measurements on HTS commercial tapes.
-
Nicolo' Riva
(EPFL - EPF Lausanne)
()
|
|
14:40
|
Analysis of Current Distirbution during Quench in a Pancake coil wound with REBCO Roebel cable.
-
Marco Breschi
(University of Bologna)
()
|
|
15:10
|
Session VI
-
Sylvie NICOLLET
(CEA)
(until 15:40)
()
|
|
15:10
|
User Defined Elements in ANSYS for Multiphysics Modeling of Superconducting Magnets.
-
Lucas Brouwer
(Lawrence Berkeley National Laboratory)
()
|
|
15:40
|
--- Coffee break ---
|
|
16:00
|
Session VI
-
Sylvie NICOLLET
(CEA)
(until 17:00)
()
|
|
16:00
|
OLYMPE, a multi-physic platform for fusion magnet design.
-
Quentin Le Coz
(CEA)
()
|
|
16:30
|
Empowering the 4C code for the thermal-hydraulic analysis of coils for the design of future SC tokamaks: a novel, fully-3D model of the TF coil structures.
-
Roberto Bonifetto
(Politecnico di Torino)
()
|
|
19:00
|
--- Social dinner ---
|
|
|
12:20
|
Session VIII
(until 12:50)
()
|
|
12:20
|
Quench Thermohydraulic Analysis of Tore Supra/WEST TF Coil and Smooth Quench Occurrence in Tokamak.
-
Sylvie NICOLLET
(CEA)
()
|
|
12:50
|
--- Lunch break ---
|
|
14:10
|
Session VIII
-
Naoyuki Amemiya
(Kyoto University)
(until 15:40)
()
|
|
14:10
|
Numerical Investigation of Quench Event in the Innermost Pair of the KSTAR Central Solenoids.
-
Dong Keun Oh
()
|
|
14:40
|
Quench Protection Design of the HL-LHC Hollow Electron Lens System.
-
Michal Maciejewski
(Technical University of Lodz(PL))
()
|
|
15:10
|
Towards to Quench Limit Determination of Superconducting Magnet with use of Thermal-Electrical Analogy
-
Dariusz Bocian
(Institute of Nuclear Physics Polish Academy of Sciences (Kraków, PL))
()
|
|
15:40
|
--- Coffee break ---
|
|
16:00
|
Wrap-up session
(until 17:00)
()
|
|
16:00
|
Workshop wrap-up
()
|
|
|