10:30
|
Update on cryostat design for magnet component damage test
-
Andreas Will
(KIT - Karlsruhe Institute of Technology (DE))
|
10:50
|
UFO MD results
-
Bjorn Hans Filip Lindstrom
(Uppsala University (SE))
|
|
10:30
|
The FAIR project at GSI
-
Rudiger Schmidt
(Technische Universitaet Darmstadt (DE))
|
11:30
|
Introduction A. Oslandsbotn
|
|
11:00
|
CLIC availability studies and operating cycle
-
Odei Rey Orozco
(Universitaet Stuttgart (DE))
|
|
10:30
|
Experience at LBNL with magnet design, protection and testing
- Dr
Emmanuele Ravaioli
(CERN)
|
10:50
|
Summary of CAS on Future Accelerator Technologies
-
Andreas Will
(KIT - Karlsruhe Institute of Technology (DE))
Andrea Apollonio
(CERN)
|
|
10:30
|
Cold diode test cryomodule: setup and commissioning
-
Andreas Will
(KIT - Karlsruhe Institute of Technology (DE))
|
10:50
|
Preliminary results of thin channel helium experiment
-
Jonas Blomberg Ghini
(Norwegian University of Science and Technology (NO))
|
|
10:30
|
Investigation of shielding effect from the Beam screen on Quench Heater discharge
-
Matthieu Valette
(CERN)
|
10:50
|
Introduction C. Neves
|
10:55
|
Introduction S. Ayadi
|
|
10:30
|
Results of UFO dynamics studies with beam in the LHC
-
Bjorn Hans Filip Lindstrom
(Uppsala University (SE))
|
10:50
|
Reliability and Availability of Particle Accelerators: Concepts, Lessons, Strategy
-
Andrea Apollonio
(CERN)
|
|
10:30
|
UFO type 2 – Analysis of beam loss signature and explanation of related hypothesis
-
Laura Katharina Grob
(Technische Universitaet Darmstadt (DE))
|
11:00
|
Introduction A. Liakopoulou
-
Akrivi Liakopoulou
(Twente Technical University (NL))
|
11:10
|
Introduction M-P. Vaananen
-
Mika Petteri Vaananen
(University of Helsinki (FI))
|
|
10:30
|
Planned beam experiment and preparation work to be done for superconducting strands
-
Andreas Will
(KIT - Karlsruhe Institute of Technology (DE))
|
10:50
|
Integration of QLASA in STEAM
-
Edvard Stubberud
(Norwegian University of Science and Technology (NO))
|
|
10:30
|
Analysis of UFO samples – Dust found inside the cold bore
-
Colino Neves
(Hochschule Furtwangen University HFU (DE))
|
10:50
|
HTS high-energy magnets for accelerators: Outlook and challenges in numerical modelling
-
Lorenzo Bortot
(CERN)
|
|
09:00
|
Study of the damage mechanisms and limits of superconducting magnet components due to beam impact
-
Vivien Raginel
|
|
10:30
|
Update on AvailSim development
-
Mikael Motyka
(Blekinge Institute of Technology BTH (SE))
|
10:50
|
Tools for collaborative development - overview and discussion
-
Michal Maciejewski
(Technical University of Lodz(PL))
|
11:10
|
Introduction C. Obermair
-
Christoph Obermair
|
|
10:30
|
First experience with crab cavity MDs in the SPS
-
Bjorn Hans Filip Lindstrom
(Uppsala University (SE))
|
11:00
|
Performance of Linac4 during the reliability run
-
Odei Rey Orozco
(Universitaet Stuttgart (DE))
|
|
10:30
|
Steady State Helium II Heat Transfer and How to Improve the Experimental Design
-
Jonas Blomberg Ghini
(Norwegian University of Science and Technology (NO))
|
10:50
|
LHC intensity cruise checklist
-
Yuancun Nie
(CERN)
|
11:10
|
Introduction D. Pracht
-
Dimitri Pracht
|
|
10:30
|
A hybrid T-A field formulation for the magnetoquasistatic analysis of HTS magnets
-
Lorenzo Bortot
(Technische Universität Darmstadt (DE))
|
10:50
|
Results from recent magnet protection tests in SM18
-
Matthias Mentink
(CERN)
Emmanuele Ravaioli
(CERN)
|
|
09:00
|
Update on preparation for upcoming UFO MD
-
Mika Petteri Vaananen
(University of Helsinki (FI))
|
09:20
|
Introduction M. Vekaria
|
|
09:00
|
Optimization of the LHC dipole circuit model starting from Post Mortem data
-
Akrivi Liakopoulou
(Twente Technical University (NL))
|
09:30
|
A one-week visit at CERN of an MIT ReACT student
-
Michal Maciejewski
(Technical University of Lodz(PL))
|
|
10:00
|
Results from dust analysis of LHC components
-
Colino Neves
(Hochschule Furtwangen University HFU (DE))
|
10:20
|
Introduction to MPE activities
-
Andrea Apollonio
(CERN)
|
10:30
|
Accelerator failures leading to beam loss and damage, observation and mitigation at RHIC
-
Matthieu Valette
(CERN)
|
11:10
|
Beam impact on (simplified) accelerator components / energy deposition studies
-
Yuancun Nie
(CERN)
|
11:30
|
Radiation to diodes
-
Andreas Will
(KIT - Karlsruhe Institute of Technology (DE))
|
|
10:30
|
First results on superconducting magnet damage tests at 4K with beam
-
Andreas Will
(KIT - Karlsruhe Institute of Technology (DE))
|
10:45
|
Crab cavity failures: lessons learnt from SPS beam tests and consequences for HL-LHC
-
Bjorn Hans Filip Lindstrom
(Uppsala University (SE))
|
11:00
|
Effect on beam of QH and CLIQ discharges (+ IT quench)
-
Matthieu Valette
(CERN)
|
|
11:00
|
CHART superconducting accelerator magnet R&D at PSI
-
Bernhard Auchmann
(CERN)
|
11:40
|
Introduction C. Wiesner
-
Christoph Wiesner
(CERN)
|
|
10:30
|
Analysis of the Modified RB Circuit with 11 T Cryo-assembly
-
Michal Maciejewski
(Technical University of Lodz(PL))
|
10:50
|
Statistical analysis of LHC turnaround and faults
-
Milan Ashwin Vekaria
(Swansea University (GB))
|
|
|
10:30
|
STEAM-SIGMA quench protection simulations of MQ magnet
-
Dimitri Pracht
|
10:50
|
Stray capacitance monitoring on a 2 m long CCT coil
-
Emmanuele Ravaioli
(CERN)
|
11:05
|
Summary of diode irradiation campaign
-
Arnaud Monteuuis
(CERN)
|
|
10:30
|
Experience from LHC powering tests
- Mr
Zinour Charifoulline
(CERN)
|
10:50
|
Summary of 2018 LHC Availability
-
Andrea Apollonio
(CERN)
|
|