Focus on:  Hide Contributions
Back to Conference View
Login
2nd PACMAN workshop

from Sunday, June 12, 2016 (7:00 PM) to Wednesday, June 15, 2016 (6:00 PM)
Debrecen

        : Sessions
    /     : Talks
        : Breaks
Jun 12, 2016
Jun 13, 2016
Jun 14, 2016
Jun 15, 2016
AM
9:00 AM
General introduction to CLIC and PACMAN - Nuria Catalan Lasheras (CERN) (until 10:30 AM)
9:00 AM Introduction by Chairman - Mr Joe Woodford (National Instruments)  
9:10 AM Emittance preservation in CLIC - Dr Hermann Schmickler (CERN)  
9:35 AM Effects of elements misalignment on Accelerator Performance - Andrea Latina (CERN)  
10:00 AM The PACMAN project - Dr Helene Mainaud Durand (CERN)  
10:30 AM --- Coffee break ---
11:00 AM
Metrology and alignment challenges - Hermann Schmickler (CERN) (until 12:30 PM)
11:00 AM The European Extremely Large Telescope - Bertrand Koehler (ESO)  
11:30 AM The LUMINAR project - Dr Andrew Lewis (National Physical Laboratory)  
12:00 PM Precision Motion Control and Metrology in Lithographic Scanners - Dr Wim Symens (ASML)  
9:00 AM
Frequency Scanning Interferometry -Mr Ben Hughes (NPL) (until 10:20 AM)
9:00 AM Developments and Applications of the Absolute Multiline Technology - Dr Heinrich Schwenke (Etalon AG)  
9:20 AM Status of FSI network development for the PACMAN project - Mr Solomon William Kamugasa (CERN)  
9:40 AM Recent developments in the field of frequency scanning interferometry - Dr Michael Campbell (NPL)  
10:00 AM Results of the “Absolute Multiline” Measurements on the Very Large Telescope - Dr Samuel Lévêque (ESO)  
10:20 AM --- Coffee break ---
10:50 AM
Handling the nanometer - Michele Modena (CERN) (until 12:30 PM)
10:50 AM Active isolation of an extended structure with fused sensors - Prof. Christophe Guy R Collette (Libre Université de Bruxelles)  
11:10 AM Design and optimization techniques for a nano-positioning system - Mr David Tshilumba (CERN)  
11:30 AM Sub-nanometer displacement measurements in seismic sensors - Mr Peter Novotny (CERN)  
11:50 AM Development of a high-resolution optical inertial sensor for sub-Hz seismic isolation - Ms Jennifer Watchi (Université Libre de Bruxelles)  
12:10 PM High resolution interferometry for sub-nm displacement measurements - Dr Marco Pisani (INRIM)  
8:15 AM
Metrology and alignment using a wire - Helene Mainaud Durand (CERN) (until 9:35 AM)
8:15 AM Error sources and mitigation in dimensional metrology - Ben Hughes (NPL)  
8:35 AM Evaluation and positioning of the PACMAN reference wire to a sub-micron level - Ms Claude Sanz (CERN)  
8:55 AM Improvements of the precision and the reliability of underground geodetic networks by using stretched wires - Prof. Thomas Touzé (HES-SO : UAS Western Switzerland)  
9:15 AM Recent developments on micro-triangulation for fiducial points and wires - Mr Vasileios Vlachakis (CERN)  
9:35 AM --- Coffee break ---
10:05 AM
Integration and conclusions - Manfred Wendt (CERN) (until 11:15 AM)
10:05 AM The path to a new CLIC main-linac module - Dr Markus Aicheler (Helsinki Institute of Physics (FI))  
10:25 AM The stochastic finite element method and its possible use in thermo-mechanical drift calculations - Prof. Lee Margetts (University of Manchester)  
10:45 AM Pre-alignment measurement uncertainty evaluation and thermal influences - Mr Iordan Petrov Doytchinov (CERN)  
11:05 AM Thank you and wrap-up of the session - Helene Mainaud Durand (CERN)  
PM
7:00 PM Welcoming registration & drinks  
12:30 PM --- Lunch buffet ---
2:00 PM
Characterization of individual components - Joe Woodford (National Instruments) (until 3:40 PM)
2:00 PM Wake field monitors - design, implementation and first experiences - Micha Dehler (PSI)  
2:20 PM Accelerating Structure Alignment with laboratory radiofrequency methods - Natalia Galindo Munoz (CERN)  
2:40 PM Advanced RF applications on the NI Platform - Mr Adam Cseh (National Instruments)  
3:00 PM Characterization and study of the PACMAN RF-BPM - Ms Silvia Zorzetti (CERN)  
3:20 PM Calibration and performance of nanometer resolution RF-BPM - Prof. Stewart Takashi Boogert (Royal Holloway, University of London)  
3:40 PM --- Coffee break ---
4:10 PM
Characterization of individual components - Carlo Petrone (CERN) (until 5:30 PM)
4:10 PM High precision miniaturized rotating PCB coil for small magnet aperture - Ms Giordana Severino (CERN)  
4:30 PM Vibrating-wire measurements for the alignment of small-aperture magnets - Mr Domenico Caiazza (CERN)  
4:50 PM Advances on magnetic measurements by stretched wires at the ESRF - Dr Gael Le Bec (ESRF)  
5:10 PM Magnetic measurement techniques and systems at the Paul Scherrer Institut - Dr Stephane Sanfilippo (Paul Scherrer Institut)  
8:00 PM --- Dinner Downtown ---
12:30 PM --- Lunch buffet ---
2:00 PM
Posters session - Kurt Artoos (CERN) (until 3:55 PM)
2:00 PM Women in Science, Technology, Engineering and Mathematics - Prof. Martine Lumbreras (University of Lorraine)  
2:30 PM Innovation Program of National Instruments Hungary - Mr Botond Barabas (National Instruments)  
2:50 PM --- Coffee break and poster session ---
4:30 PM
Visit National Instruments facilities (until 6:55 PM)
8:00 PM --- Folk night in the Tuba farm ---