Choose timezone
Your profile timezone:
Advanced Low Emittance Rings Technology (ALERT) 2016 Workshop
→
Europe/Rome
Trieste, Italy
Trieste, Italy
SAVOIA EXCELSIOR PALACE
Riva del Mandracchio, 4
34124 Trieste
Italia
Description
Trieste | 14-16 September 2016
A workshop on Advanced Low Emittance Rings Technology (ALERT 2016) is organized by ELETTRA on the 14th and 16th of September 2016, as a series of the Low Emittance Rings (LOWεRING) Workshops, supported by the EUCARD2 project.
This will be the 2nd workshop on Low Emittance Rings technology after the one organized in the 2014 in Valencia.
The state of the art in the design of accelerator systems in light source storage rings has today many challenges and issues in common with those of linear collider damping rings and future e+/e- circular collider projects. A series of workshops were made since 2010 aiming at strengthening the collaborations within the low emittance rings' community, including the LOWεRING collaboration network and the USR workshops community.
The goal of the ALERT2016 workshop is to bring together scientists but also industrial partners who are designing and building hardware for low emittance rings, with an emphasis on studies and experimental programs in existing rings and facilities. The impact of targeting and reaching ultra-low emittances to the design of technical systems will be addressed, including operational issues, manufacturing tolerances, calibration and stability/repeatability problems, in an environment dominated by synchrotron radiation.
With MAX IV in commissioning and ESRF II and Sirius in construction, this workshop will benefit from the technological solutions already tested at these labs and important lessons could be learned.
Workshop sessions will include:
- Insertion devices (including also superconducting devices)
- Magnets and alignment
- Injection systems (kickers, multipoles etc)
- RF systems, choices and design
- Vacuum systems and vacuum chambers
- Feedback systems
- Instrumentation
Proposals for contributions to the workshop should be addressed to one of the Scientific Committee members
|
Scientific Committee
|
Local organizing committee |
EuCARD-2 is co-funded by the partners and the European Commission under Capacities 7th Framework Programme, Grant Agreement 312453
Participants
-
-
08:00
→
08:45
Registration
Sala IMPERATORE
-
08:45
→
09:00
Welcome 15m
From the President and CEO of Elettra - Sincrotrone Trieste
Speaker: Prof. Alfonso Franciosi (Elettra) -
09:00
→
11:00
General Session
Chair. Y. Papaphilipou (CERN)
-
09:00
Highlights from MAX IV commissioning and operation 30mSpeaker: Dr Pedro Tavares (MAX IV)
- 09:30
-
10:00
Sirius and Sirius magnets 30mSpeaker: Mr James Citadini (LNLS )
- 10:30
-
09:00
-
11:00
→
11:30
coffee break
-
11:30
→
13:00
Insertion devices
Chair: D. Einfeld (ESRF)
- 11:30
-
11:55
Planar superconducting undulator with neutral pole: test results of the prototype 25mSpeaker: Dr Nikolay Mezentsev (BINP)
- 12:20
-
12:45
Discussion 15m
-
13:00
→
14:20
Lunch
-
14:30
→
16:00
Magnets
Chair: P. Tavares (MAX IV)
-
14:30
MAX IV 3 GeV ring magnet 25mSpeaker: Mr Martin Johansson (MAX IV)
-
14:55
Magnets for DDBA and lessons learned for Diamond-II 25mSpeaker: Mr Abolfazl Shahveh (Diamond)
-
15:20
Magnets for Elettra 2.0 25mSpeaker: Mr Davide Castronovo (Elettra)
-
15:45
Discussion 15m
-
14:30
-
16:00
→
16:30
Coffee Break
-
16:30
→
18:00
Magnets & alignment
Chair: P. Kuske (HZB)
-
16:30
Dipoles with longitudinally variable field for CLIC damping rings 25mSpeaker: Manuel Dominguez (CIEMAT)
-
16:55
NbTi wiggler tests at ANKA 25mSpeaker: Axel Bernhard (ANKA)
-
17:20
Vibrating wire method and hall probe measurements for combined function magnets (DQ) alignment 25mSpeaker: Dr Alexander Temnykh (Cornell)
-
17:45
Discussion 15m
-
16:30
-
19:00
→
20:30
Welcome reception at SAVOIA EXCELSIOR PALACE
-
08:00
→
08:45
-
-
08:30
→
09:00
Registration
Sala IMPERATORE
-
09:00
→
11:10
Beam transfer systems
Chair: R. Bartolini (JAI - DIAMOND)
-
09:00
Production of round beams 30mSpeaker: Dr Peter Kuske (HZB - BESSY)
-
09:30
Development of Multipole Injection Kicker for SOLEIL and MAX IV 25mSpeaker: Mr Pierre Lebasque (Soleil)
-
09:55
Stripline kicker development at ALS 25mSpeaker: Dr Cristoph Steier (LBL)
-
10:20
Transient studies of the stripline kicker for beam extraction from the CLIC damping rings 25mSpeaker: Dr Carolina Belver Aguilar (CERN)
-
10:45
Inductive adders ultra-stable kicker pulse generation 25mSpeaker: Janne Holma (CERN)
-
09:00
-
11:10
→
11:30
Coffee Break
-
11:30
→
13:00
RF systems and power
Chair: R. Nagaoka (SOLEIL)
-
11:30
MAX IV RF systems 25mSpeaker: Dr Lars Malmgren (MAX IV)
-
11:55
Conceptual design of a 2GHz RF system for the CLIC DRs 25mSpeaker: Dr Alexej Grudiev (CERN)
-
12:20
State-of-the-art RF solid state power amplifiers 25mSpeaker: Mr Massamba Diop, on behalf of P. Marchand (Soleil)
-
12:45
Discussion 15m
-
11:30
-
13:00
→
14:20
Lunch
-
14:30
→
16:30
Feedback systems and Enginneering
Chair: S. Guiducci (INFN-LNF)
- 14:30
-
14:55
Application of wide-band feedback systems for low emittance rings 25mSpeaker: Dr John Fox (SLAC)
-
15:20
Engineering for DDBA and lessons learned for Diamond-II 35mSpeaker: Mr Nigel Hammond (Diamond)
-
15:55
Risk assessment for the ESRF II 25mSpeaker: Prof. Dieter Einfeld (ESRF)
-
16:20
Discussion 10m
-
16:30
→
17:00
Coffee Break
-
17:15
→
19:30
Visit to Elettra
-
20:00
→
22:00
Workshop Dinner at SAVOIA EXCELSIOR PALACE
-
08:30
→
09:00
-
-
08:00
→
08:30
Registration
Sala Zodiaco
-
08:30
→
10:45
Diagnostics, Instrumentation and coating
Chair: Å. Andersson (MAX IV)
-
08:30
Ultra-low vertical emittance measurements in the Australian Light Source 25mSpeaker: Prof. Mark Boland (Australian Synchrotron)
-
08:55
Conceptual design of X-ray interferometer for extremely apparent small beam size in FCC-ee and beam halo measurement with coronagraph for HL LHC 25mSpeaker: Prof. Toshiyuki Mitsuhash (KEK)
-
09:20
Ultra-short bunch length diagnostics 25mSpeaker: Axel Bernhard (KIT-ANKA)
-
09:45
Laser engineered surfaces 25mSpeaker: Prof. Amin Abdolvand (Dundee University)
-
10:10
Experience with coating of low gap chambers 25mSpeaker: Roberto Kersevan (CERN)
-
10:35
Discussion 10m
-
08:30
-
10:45
→
11:00
coffee break / Workshop Photo
-
11:00
→
13:15
Vaccuum and other Key technologies and engineering
Chair: A. Bernhard (KIT-ANKA)
-
11:00
MAX IV 3 GeV ring vacuum system 25mSpeaker: Mr Marek Grabski (MAX IV)
-
11:25
Vacuum systems for DDBA and lessons learned for Diamond-II 25mSpeaker: Dr Matthew Cox (Diamond)
-
11:50
Experience and future trends of Harmonic RF systems 25mSpeaker: Dr John Byrd (LBL)
-
12:15
Transverse and horizontal beam size diagnostics with visible SR 25mSpeaker: Dr Åke Andersson (MAX IV)
-
12:40
Particle Accelerator Components’ Metrology and Alignment to the Nanometre scale (PACMAN) 25mSpeaker: Michele Modena (CERN)
-
13:05
Discussion 10m
-
11:00
-
13:15
→
14:30
Lunch
-
14:30
→
16:00
Collaboration with industry
Chair: R. Geometrante (Kyma)
-
14:30
SAES group activity in accelerator technology 15mSpeaker: Mr Paolo Manini (SAES Getters SpA)
-
14:45
Strumenti scientifici CINEL: a reliable supplier for products as well as a skillful partner for R&D projects 15mSpeaker: Dr Riccardo Signorato (CINEL)
-
15:00
SiC MOSFET & Diode Roadmap 15mSpeaker: Mr Wolfgang Knitterscheidt (eurocomp)
-
15:15
Superconducting undulators 15mSpeaker: Cristian Boffo (Babcock Noell GmbH)
-
15:30
KYMA: a success story of technology transfer and strategic partnerships 15mSpeaker: Dr Geometrante Raffaella (KYMA)
-
15:45
Tunga Lyft - Installations at MAXIV 15mSpeaker: Mr Olle Torsteni (Tunga Lyft)
-
14:30
-
16:00
→
16:30
coffee break
-
16:30
→
18:00
Summary and close out
Chair: R. Geometrante (Kyma)
-
16:30
Summary talk 30m
-
17:00
Discussion and close-out 1h
-
16:30
-
08:00
→
08:30
