Choose timezone
Your profile timezone:
Advanced Low Emittance Rings Technology (ALERT) 2016 Workshop
→
Europe/Rome
Trieste, Italy
Trieste, Italy
SAVOIA EXCELSIOR PALACE
Riva del Mandracchio, 4
34124 Trieste
Italia
Description
Trieste | 14-16 September 2016
A workshop on Advanced Low Emittance Rings Technology (ALERT 2016) is organized by ELETTRA on the 14th and 16th of September 2016, as a series of the Low Emittance Rings (LOWεRING) Workshops, supported by the EUCARD2 project.
This will be the 2nd workshop on Low Emittance Rings technology after the one organized in the 2014 in Valencia.
The state of the art in the design of accelerator systems in light source storage rings has today many challenges and issues in common with those of linear collider damping rings and future e+/e- circular collider projects. A series of workshops were made since 2010 aiming at strengthening the collaborations within the low emittance rings' community, including the LOWεRING collaboration network and the USR workshops community.
The goal of the ALERT2016 workshop is to bring together scientists but also industrial partners who are designing and building hardware for low emittance rings, with an emphasis on studies and experimental programs in existing rings and facilities. The impact of targeting and reaching ultra-low emittances to the design of technical systems will be addressed, including operational issues, manufacturing tolerances, calibration and stability/repeatability problems, in an environment dominated by synchrotron radiation.
With MAX IV in commissioning and ESRF II and Sirius in construction, this workshop will benefit from the technological solutions already tested at these labs and important lessons could be learned.
Workshop sessions will include:
- Insertion devices (including also superconducting devices)
- Magnets and alignment
- Injection systems (kickers, multipoles etc)
- RF systems, choices and design
- Vacuum systems and vacuum chambers
- Feedback systems
- Instrumentation
Proposals for contributions to the workshop should be addressed to one of the Scientific Committee members
|
Scientific Committee
|
Local organizing committee |
EuCARD-2 is co-funded by the partners and the European Commission under Capacities 7th Framework Programme, Grant Agreement 312453
Participants
-
-
Registration
Sala IMPERATORE
-
1
Welcome
From the President and CEO of Elettra - Sincrotrone Trieste
Speaker: Prof. Alfonso Franciosi (Elettra) -
General Session
Chair. Y. Papaphilipou (CERN)
-
2
Highlights from MAX IV commissioning and operationSpeaker: Dr Pedro Tavares (MAX IV)
- 3
-
4
Sirius and Sirius magnetsSpeaker: Mr James Citadini (LNLS )
- 5
-
2
-
coffee break
-
Insertion devices
Chair: D. Einfeld (ESRF)
- 6
-
7
Planar superconducting undulator with neutral pole: test results of the prototypeSpeaker: Dr Nikolay Mezentsev (BINP)
- 8
-
9
Discussion
-
Lunch
-
Magnets
Chair: P. Tavares (MAX IV)
-
10
MAX IV 3 GeV ring magnetSpeaker: Mr Martin Johansson (MAX IV)
-
11
Magnets for DDBA and lessons learned for Diamond-IISpeaker: Mr Abolfazl Shahveh (Diamond)
-
12
Magnets for Elettra 2.0Speaker: Mr Davide Castronovo (Elettra)
-
13
Discussion
-
10
-
Coffee Break
-
Magnets & alignment
Chair: P. Kuske (HZB)
-
14
Dipoles with longitudinally variable field for CLIC damping ringsSpeaker: Manuel Dominguez (CIEMAT)
-
15
NbTi wiggler tests at ANKASpeaker: Axel Bernhard (ANKA)
-
16
Vibrating wire method and hall probe measurements for combined function magnets (DQ) alignmentSpeaker: Dr Alexander Temnykh (Cornell)
-
17
Discussion
-
14
-
Welcome reception at SAVOIA EXCELSIOR PALACE
-
-
-
Registration
Sala IMPERATORE
-
Beam transfer systems
Chair: R. Bartolini (JAI - DIAMOND)
-
18
Production of round beamsSpeaker: Dr Peter Kuske (HZB - BESSY)
-
19
Development of Multipole Injection Kicker for SOLEIL and MAX IVSpeaker: Mr Pierre Lebasque (Soleil)
-
20
Stripline kicker development at ALSSpeaker: Dr Cristoph Steier (LBL)
-
21
Transient studies of the stripline kicker for beam extraction from the CLIC damping ringsSpeaker: Dr Carolina Belver Aguilar (CERN)
-
22
Inductive adders ultra-stable kicker pulse generationSpeaker: Janne Holma (CERN)
-
18
-
Coffee Break
-
RF systems and power
Chair: R. Nagaoka (SOLEIL)
-
23
MAX IV RF systemsSpeaker: Dr Lars Malmgren (MAX IV)
-
24
Conceptual design of a 2GHz RF system for the CLIC DRsSpeaker: Dr Alexej Grudiev (CERN)
-
25
State-of-the-art RF solid state power amplifiersSpeaker: Mr Massamba Diop, on behalf of P. Marchand (Soleil)
-
26
Discussion
-
23
-
Lunch
-
Feedback systems and Enginneering
Chair: S. Guiducci (INFN-LNF)
- 27
-
28
Application of wide-band feedback systems for low emittance ringsSpeaker: Dr John Fox (SLAC)
-
29
Engineering for DDBA and lessons learned for Diamond-IISpeaker: Mr Nigel Hammond (Diamond)
-
30
Risk assessment for the ESRF IISpeaker: Prof. Dieter Einfeld (ESRF)
-
31
Discussion
-
Coffee Break
-
Visit to Elettra
-
Workshop Dinner at SAVOIA EXCELSIOR PALACE
-
-
-
Registration
Sala Zodiaco
-
Diagnostics, Instrumentation and coating
Chair: Å. Andersson (MAX IV)
-
32
Ultra-low vertical emittance measurements in the Australian Light SourceSpeaker: Prof. Mark Boland (Australian Synchrotron)
-
33
Conceptual design of X-ray interferometer for extremely apparent small beam size in FCC-ee and beam halo measurement with coronagraph for HL LHCSpeaker: Prof. Toshiyuki Mitsuhash (KEK)
-
34
Ultra-short bunch length diagnosticsSpeaker: Axel Bernhard (KIT-ANKA)
-
35
Laser engineered surfacesSpeaker: Prof. Amin Abdolvand (Dundee University)
-
36
Experience with coating of low gap chambersSpeaker: Roberto Kersevan (CERN)
-
37
Discussion
-
32
-
coffee break / Workshop Photo
-
Vaccuum and other Key technologies and engineering
Chair: A. Bernhard (KIT-ANKA)
-
38
MAX IV 3 GeV ring vacuum systemSpeaker: Mr Marek Grabski (MAX IV)
-
39
Vacuum systems for DDBA and lessons learned for Diamond-IISpeaker: Dr Matthew Cox (Diamond)
-
40
Experience and future trends of Harmonic RF systemsSpeaker: Dr John Byrd (LBL)
-
41
Transverse and horizontal beam size diagnostics with visible SRSpeaker: Dr Åke Andersson (MAX IV)
-
42
Particle Accelerator Components’ Metrology and Alignment to the Nanometre scale (PACMAN)Speaker: Michele Modena (CERN)
-
43
Discussion
-
38
-
Lunch
-
Collaboration with industry
Chair: R. Geometrante (Kyma)
-
44
SAES group activity in accelerator technologySpeaker: Mr Paolo Manini (SAES Getters SpA)
-
45
Strumenti scientifici CINEL: a reliable supplier for products as well as a skillful partner for R&D projectsSpeaker: Dr Riccardo Signorato (CINEL)
- 46
-
47
Superconducting undulatorsSpeaker: Cristian Boffo (Babcock Noell GmbH)
-
48
KYMA: a success story of technology transfer and strategic partnershipsSpeaker: Dr Geometrante Raffaella (KYMA)
-
49
Tunga Lyft - Installations at MAXIVSpeaker: Mr Olle Torsteni (Tunga Lyft)
-
44
-
coffee break
-
Summary and close out
Chair: R. Geometrante (Kyma)
- 50
-
51
Discussion and close-out
-
