Name: CEC-ICMC 2015 - Timetable, Abstracts and Presentations
Start: 2015-06-28T08:00:00+07:00
End: 2015-07-02T13:00:00+07:00
Location: JW Marriott Starr Pass Resort

Monday, June 29, 2015

7:50 AM Cryo Expo Open (9:00 - 17:00)
Cryo Expo Open (9:00 - 17:00)
7:50 AM - 7:50 AM
Room: Exhibit Hall (Arizona Ballroom)

7:55 AM

7:55 AM - 8:15 AM
Room: Tucson Ballroom EF
8:15 AM
8:15 AM - 9:00 AM
Room: Tucson Ballroom EF
Contributions

8:15 AM Bulk Superconducting Materials – Ready for Applications? - John Durrell (University of Cambridge)
9:00 AM Morning Break
Morning Break
9:00 AM - 9:30 AM
Room: Exhibit Hall (Arizona Ballroom)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Peak Current Limiting Properties of SFCL with Parallel Connected Coils using Two Magnetic Paths - Seok-Cheol Ko (Kongju National University)

9:00 AM Cooling topology options for HTS rotating superconducting machinery - Leslie Bromberg (MIT - Plasma Science and Fusion Center) Philip Michael (MIT - Plasma Science and Fusion Center)

9:00 AM Development of a cooling system for 66/6.9kV-20MVA REBCO superconducting transformers with a Ne turbo-Brayton refrigerator and subcooled liquid nitrogen - Masataka Iwakuma (Kyushu University)

9:00 AM Performance of a 10 kJ SMES Model Cooled by Liquid Hydrogen Thermo-Siphon Flow for ASPCS Study - Takakazu Shintomi (KEK)

9:00 AM Commercialization of a Turbo-Brayton cycle refrigerator for HTS power applications - Hirokazu Hirai (Taiyo Nippon Sanso Corporation)

9:00 AM Performance analysis of superconducting generator electromagnetic shielding - dong XIA (Chinese Academy of Sciences)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Performance Test of the Cryogenic Cooling System for the Superconducting Fault Current Limiter - Yong-Ju Hong Hong (Korea Institute of Machinery & Materials)

9:00 AM Progress in Development of a 10 kW Brayton Cryocooler for HTS Cable in Korea - Ho-Myung Chang (Hong Ik University)

9:00 AM HTS cooling below 60 K with two-stage mixed-refrigerant cascades using low-flammability mixtures - Thomas M. Kochenburger (Karlsruhe Institute of Technology, Institute for Technical Thermodynamics and Refrigeration)

9:00 AM THE SAFE REMOVAL OF FROZEN AIR FROM THE ANNULUS OF AN LH2 STORAGE TANK - Angela Krenn (NASA)

9:00 AM Development of cryogenic installations for large liquid argon based neutrino detectors - Johan Bremer (CERN)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Numerical studies on the phase adjustment systems of high frequency pulse tube cryocooler with a gradient temperature distribution - Junjie Wang (Technical Institute of Physics and Chemistry, CAS) Liubiao Chen (Technical Institute of Physics and Chemistry, CAS) Sixue Liu (Technical Institute of Physics and Chemistry,CAS)

9:00 AM TRANSIENT ANALYSIS OF SINGLE STAGE GM TYPE DOUBLE INLET PULSE TUBE CRYOCOOLER - HEMANT NAIK (S. V. National Institute of Technology)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM FRIB Cryogenic Distribution System - Nathaniel Laverdure (Jefferson Lab)

9:00 AM Value Engineering in System of Cryoline and Cryodistribution for ITER: In-kind Contribution from India - Hitensinh Vaghela (ITER-India, Institute for Plasma Research)

9:00 AM Load specification and embedded plate definition for the ITER cryoline system - Hiten Vaghela (ITER-India, Institute for Plasma Research)

9:00 AM European XFEL-linac Feed and End cap dimensional tolerance validation - Marinco Lefevere (Demaco) Ronald Dekker (Demaco) Ruud Woude van de (Demaco)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Time resolved cryogenic cooling analysis of the Cornell Injector Cryomodule - Ralf Eichhorn (Cornell University)

9:00 AM Occurrence of thermoacoustic phenomena at 0.8 K, 4 K and above - Wolfgang Stautner (GE Global Research)

9:00 AM Dynamics of liquid nitrogen cooling process of solid surface at wetting contact surface. - Przemyslaw Smakulski (Wroclaw University of Technology)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Physical properties of material useful for predicting stability and quench propagation in high-field Bi-2212 magnets - Pei Li (Fermi National Accelerator Laboratory)

9:00 AM Optimizing Flux Pinning of YBCO Thin Films with BZO + Y2O3 Double-Mixed Phase Additions - Timothy Haugan (U.S. Air Force Research Laboratory)

9:00 AM Quench induced critical current degradation in REBCO coated conductor and Bi2223 tape - Liyang Ye (Fermi National Accelerator Laboratory)

9:00 AM Single-strand excitation for examining current sharing and ICR in Nb3Sn Rutherford Cable at 4.2K up to 15 Tesla - Chris Kovacs (Ohio State University)

9:00 AM Optimizing Flux Pinning of YBa2Cu3O7-δ (YBCO) Thin Films with Unique Large Nanoparticle Size and High Concentration of Y2BaCuO5 (Y211) Additions - Timothy Haugan (U.S. Air Force Research Laboratory)

9:00 AM Measurements of YBCO pancake coils: thermal conductivity, quench, and NZP at 4.2 K and 10 T. - Milan Majoros (The Ohio State University)
11:00 AM
11:00 AM - 12:00 PM
Room: Tucson Ballroom E
Contributions

11:00 AM The Cost of Coolers for Cooling Superconducting Devices from 4.2 to 4.7 K, from 20 to 30 K, and from 65 to 80 K - Michael Green (Lawrence Berkeley Laboratory)

11:15 AM Second stage Cooling from a PT-415 Cooler at Second-stage Temperatures up to 125 K with Heat Loads on the First-stage from 0 to 60 W - Michael Green (Michigan State University)

11:30 AM Development of high efficiency Stirling cryocooler for high temperature superconducting motor - Nakano Kyousuke (Sumitomo Heavy Industries, Ltd.)

11:45 AM R&D status of highly efficient Stirling-type cryocooler for superconducting drive motor - Jun Watanabe (Kyoto University)
11:00 AM - 12:15 PM
Room: Tucson Ballroom F
Contributions

11:00 AM ULTRA-FLEXIBLE THERMAL BUS FOR USE IN THE ASTRO-H ADIABATIC DEMAGNETIZATION REFRIGERATOR - Mark Kimball (NASA/Goddard Space Flight Center)

11:15 AM A thermally-conductive electrical isolator for use at ultra-low temperatures in the Astro-H Adiabatic Demagnetization Refrigerator - Mark Kimball

11:30 AM Low-temperature thermal conductivity of highly porous copper - Gonçalo Tomás (LIBPhys, Physics Department, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa)

11:45 AM Single-phase ambient and cryogenic temperature heat transfer coefficients in microchannels - Peter Bradley (NIST)

12:00 PM Flow of nitrogen gas in a liquid helium cooled vacuum tube: Condensation heat transfer - Ram Dhuley (Florida State University)
11:00 AM - 12:15 PM
Room: Tucson Ballroom GH
Contributions

11:00 AM Testing of Full-Scale Prototype Cryoviscous Compressor at SNS for ITER Vacuum System - Robert Duckworth (Oak Ridge National Laboratory)

11:15 AM Design of cold compressor systems in terms of operational and economical aspects - Lutz Decker (Linde Kryotechnik AG)

11:30 AM Adaptation of refrigeration compressors for Joule-Thomson cryocoolers fed with gas mixtures - Agnieszka Piotrowska (Wroclaw University of Technology)

11:45 AM Development of an oil-free compressor for GM and pulse tube cryocoolers - Jens Höhne (Pressure Wave Systems GmbH)

12:00 PM Engineering, Manufacture and Preliminary Testing of the ITER Toroidal Field (TF) Magnet Helium Cold Circulator - Chris Rista, P.E. (Barber-Nichols Inc.)
11:00 AM - 12:30 PM
Room: Tucson Ballroom IJ
Contributions

11:00 AM Performance Testing of a 15K Pulse Tube Cooler for Space Applications - James Butterworth (Air Liquide Advanced Technologies)

11:30 AM Lockheed Martin Joule-Thomson Compressor Development - Patrick Champagne (Lockheed Martin)

11:45 AM Qualification campaign of the 50 mK sorption-ADR cooler for SPICA/SAFARI - Jean-Marc duval (CEA)

12:00 PM Coupled tests of the Closed Cycle Dilution Refrigerator and 3He compressor for space - Gerard VERMEULEN (Institut Neel (CNRS))

12:15 PM Test results of sorption-based helium-3 pump for a closed-cycle dilution refrigerator - Marcel ter Brake (University of Twente, The Netherlands)
11:00 AM - 12:30 PM
Room: Tucson Ballroom AB
Contributions

11:00 AM [Invited] Record engineering current density of 246 A/mm2 at 17 T in HTS Conductor on Round Core (CORC) cables made at Advanced Conductor Technologies - Danko van der Laan (Advanced Conductor Technologies)

11:30 AM Persistent Magnetization and Decay in Bi:2212, YBCO, and Nb3Sn and influence on Accelerator Magnet Field Errors - Mike Sumption (The Ohio State University)

11:45 AM Subsea Superconducting Power Cables for Offshore Renewable Energy Integration - QUAN LI (University of Edinburgh)

12:00 PM Dielectric Properties of Cryogenic Gas Mixtures Containing Helium, Neon, and Hydrogen - Lukas Graber (Florida State University)

12:15 PM Development of MgB2 conductors for low field coils and feeders in DEMO fusion energy reactors - Arend Nijhuis (University of Twente)
11:00 AM - 12:30 PM
Room: Tucson Ballroom CD
Contributions

11:00 AM [Invited] DESIGN AND FABRICATION OF A CRYOSTAT FOR LOW TEMPERATURE MECHANICAL TESTING FOR THE MECHANICAL AND MATERIAL’S ENGINEERING GROUP AT CERN - Stefanie Langeslag (CERN)

11:30 AM Thermal Contraction of Electrical Insulators - Richard Reed (Cryogenic Materials, Inc.)

11:45 AM Apparatus and method for low-temperature training of shape memory alloys - Adam Swanger (NASA Kennedy Space Center)

12:00 PM DESIGN OF LOAD-TO-FAILURE TESTS OF HIGH-VOLTAGE ELECTRIC INSULATION BREAKS FOR ITER’S CRYOGENIC NETWORK. - Stefanie Langeslag (CERN)

12:15 PM SOFI/Substrate Integrity Testing for Cryogenic Propellant Tanks - Mark Haynes (Composite Technology Development)
12:30 PM Lunch (on your own)
Lunch (on your own)
12:30 PM - 2:00 PM
2:00 PM
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM DESIGN REALIZATION TOWARDS THE QUALIFICATION TEST OF ITER COLD CIRCULATOR - Hitensinh Vaghela (ITER-India, Institute for Plasma Research)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Pumping speed studies of activated carbons at 4.2 K adhered to indigenously developed hydroformed cryopanels - Ranjana Gangradey (Institute for Plasma Research, India)

2:00 PM Preliminary design of the beam screen cooling for the Future Circular Collider of hadron beams - Laurent Jean Tavian (CERN)

2:00 PM Proposed Thermodynamic Nomenclature of Cryogenic Refrigeration Cycles for Liquefaction of Natural Gas - Hye Su Lim (Hong Ik University)

2:00 PM Status of ITER thermal shield development - Kwanwoo Nam

2:00 PM Neon Helium Mixtures as a Refrigerant for the FCC Beam Screen Cooling: Comparison of Cycle Design Options - Steffen Kloeppel (TU Dresden)

2:00 PM Thermal Design and Performance results of the first High Beta Cryomodule for HIE-ISOLDE at CERN - Luca Valdarno (CERN)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Air Force Research Laboratory Spacecraft Cryocooler Endurance Evaluation Final Report - Jordan Armstrong (Glacier Technical Solutions, Air Force Research Laboratory)

2:00 PM Theoretical and experimental investigations on impedance of pulse tube cold fingers to match with linear compressors - Jun Tan (Shanghai Institute of Technical Physics)

2:00 PM Properties of two stage Adiabatic Demagnetization Refrigerator - Hidehito Fukuda (Environment and Energy Materials Division, National Institute for Materials Science)

2:00 PM Effect of DC flow on a three-stage Stirling pulse tube cryocooler working at liquid helium temperatures - Chen Huang (Zhejiang University)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Theoretical research of helium pulsating heat pipe under steady state - Huiming Liu (Technical Institute of Physics and Chemistry of the Chinese Academy of Sciences)

2:00 PM Development of membrane cryostats for large liquid argon neutrino detectors - David Montanari (Fermi National Accelerator Laboratory)

2:00 PM Hydrogen refrigeration via kinetic para-ortho manipulation in a vortex tube - Elijah Shoemake (Washington State University)

2:00 PM Expansion Vessel for Supercritical Hydrogen in a Spallation Neutron Source Moderator Circuit - Marcel Klaus (Technische Universitaet Dresden)

2:00 PM Modeling Thermal Parasitic Load Lines for an Optical Refrigerator - Christopher Dodson (Air Force research labs) Thomas Fraser (air force research labs)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Mechanical problems for a Ni-alloy reinforced Bi-2223/Ag conductor -Towards a super-high field compact magnet- - Masato Nawa (Graduate School of Engineering, Chiba University)

2:00 PM Infulence of neutron irradiation on conduction cooling superconducting magnets - Toru Ogitsu

2:00 PM Transport testing of MgB2 and Nb3Sn solenoid coils for magnet applications - Hyun Sung Kim (The Ohio State University)

2:00 PM High resolution NMR measurements by using a 400 MHz (9.39 T) LTS/REBCO NMR magnet with a best mix use of various field correction methods ~ Towards a super-high field/compact type of NMR magnet ~ - Renzhong Piao (Graduate School of Engineering, Chiba University)

2:00 PM Magnetic and Structural Design of a 15 T Nb3Sn Accelerator Dipole Model - Vadim Kashikhin (Fermilab)

2:00 PM Design of a REBCO HTS Superconducting Undulator - Ibrahim Kesgin (Argonne National Laboratory)

2:00 PM Development of tools for advanced quench diagnostics at LBNL Magnet Test Facility - Maxim Marchevsky (Lawrence Berkeley National Laboratory)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Multi-Layer Aerogel Insulation for Cryogenic Applications - Shannon White (Aspen Aerogels, Inc.)

2:00 PM Cylindrical Boiloff Calorimeters for Testing of Thermal Insulation Systems - James Fesmire (NASA)

2:00 PM New measurements of multilayer insulation at variable cold temperature and elevated residual gas pressures - Thomas Funke (Technische Universitaet Dresden)

2:00 PM Design and performance of a 3D printed liquid hydrogen tank with vapor cooled shielding for use in unmanned aerial vehicles - Patrick Adam (Washington State University)

2:00 PM Flat Plate Boiloff Calorimeters for Testing of Thermal Insulation Systems - James Fesmire (NASA)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Fabrication of Biomedical Titanium Alloys with High Strength and Low Modulus by Spark Plasma Sintering - Wei Wang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)

2:00 PM Qualification of Electron-Beam Welded Joints between Copper and Stainless Steel for Cryogenic Application - Klaus-Peter Weiss (KIT, Institute for Technical Physics)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Computational Investigation of Superconducting Magnetic Energy Storage (SMES) Devices to Maximize Energy Density - Timothy Haugan (U.S. Air Force Research Laboratory)
3:00 PM Afternoon Break
Afternoon Break
3:00 PM - 3:30 PM
Room: Exhibit Hall (Arizona Ballroom)
4:00 PM
4:00 PM - 5:00 PM
Room: Tucson Ballroom E
Contributions

4:00 PM [Invited] ESS Cryogenic System Process Design - Philipp Arnold (European Spallation Source ESS AB)

4:30 PM ESS accelerator plant process design - xilong wang (European Spallation Source ESS AB)

4:45 PM ITER: Test protocol to demonstrate the Cryogenic Helium plant performances - Yannick FABRE (AIR LIQUIDE Advanced Technologies)
4:00 PM - 6:00 PM
Room: Tucson Ballroom F
Contributions

4:00 PM Performance of Cryogenic Thermal Insulation Materials under Liquid Hydrogen Environment - Kyeong Ho Kim (Korea Institute of Science and Technology) Sarng Woo Karng (Korea Institute of Science and Technology) Soojin Shin (Korea Institute of Science and Technology)

4:15 PM Influence of tailored MLI for complex surface geometries on heat transfer - Thomas Richter (Karlsruhe Institute of Technology (KIT))

4:30 PM ADVANCED AND ENERGY SAVING THERMAL INSULATIONS FOR CRYOGENIC APPLICATIONS - QuanSheng Shu (Retired Senior Scientist)

4:45 PM Demonstration of Hybrid Multilayer Insulation for Fixed Thickness Applications - Wesley Johnson

5:00 PM OPERATIONAL HISTORY OF LIQUID HYDROGEN TANK WITH GLASS BUBBLES INSULATION - Jared Sass (NASA Kennedy Space Center)

5:15 PM Comparison tests of cellular glass insulation for the development of cryogenic insulation standards - Jonathan Demko (LeTourneau University)

5:30 PM Quantifying MLI Thermal Conduction in Cryogenic Applications from Experimental Data - Ronald Ross (Jet Propulsion Laboratory)

5:45 PM Thermal Performance Testing of Cryogenic Multilayer Insulation with Silk Net Spacers - Wesley Johnson
4:00 PM - 5:15 PM
Room: Tucson Ballroom GH
Contributions

4:00 PM A new 2 K superconducting half-wave cavity cryomodule for PIP-II - Zachary Conway (Argonne National Laboratory)

4:15 PM First results from the Cornell high Q cw full linac cryo-module - Ralf Eichhorn (Cornell University)

4:30 PM Commissioning and Operation of the Horizontal Test Apparatus at SNS - Brian DeGraff (ORNL)

4:45 PM Computational and experimental investigation of hydroformed niobium tubes for superconducting RF cavities - Hyun Sung Kim (The Ohio State University)

5:00 PM Stainless Steel to Titanium Bimetallic Transitions - Joshua Kaluzny (Fermilab)
4:00 PM - 5:15 PM
Room: Tucson Ballroom IJ
Contributions

4:00 PM Raytheon Advanced Miniature Cryocooler Characterization Testing - Ted Conrad (Raytheon)

4:15 PM In-Flight Performance of the OCO-2 Cryocooler - Arthur Na-Nakornpanom (Jet Propulsion Laboratory)

4:45 PM MatISSE Microcryocooler - Jeff Olson (Lockheed Martin Space Systems Company)
4:00 PM - 6:00 PM
Room: Tucson Ballroom AB
Contributions

4:00 PM [Invited] Effectiveness of laser striation for AC loss reduction in SuperOx coated conductor. - Anna Kario (Karlsruhe Institute of Technology, Institute for Technical Physics)

4:30 PM Electromagnetic behavior of striated coated conductors wound into pancake coils - Naoyuki Amemiya (Kyoto University)

4:45 PM Calorimetric Measurements of AC losses in HTS coils and tapes in a Stator Environment - John Murphy (University of dayton Research Institute) Timothy Haugan (USAF)

5:00 PM Pulsed field stability and AC loss of Nb3Sn CICCs by quantitative modeling and experiments - Arend Nijhuis (University of Twente)

5:15 PM Calorimetrically Measured Interstrand Contact Resistances and Coupling Magnetizations in Cored QXF-Type Nb3Sn Rutherford Cables for the LHC Quadrupole Upgrade - Ted Collings (MSE, OSU)

5:30 PM Magnetization losses in MgB2 wire matrix material - Philippe Masson (University of Houston)

5:45 PM Modelling AC ripples in HTS coated conductors - Francesco Grilli (Karlsruhe Institute of Technology)
4:00 PM - 6:00 PM
Room: Tucson Ballroom CD
Contributions

4:00 PM [Invited] The Processing of Bulk, Melt Processed (RE)BCO Superconductors with World Record Fields - David Cardwell (University of Cambridge)

4:30 PM [Invited] Giant Field Leap in Bulk HTS – A Systematic Failure of the Critical State Model - Roy Weinstein (University of Houston)

5:00 PM Influence of ZnO and Dy2O3 on MgB2 Bulks Fabricated by High Temperature and Pressure Reaction - Yuan Yang (OSU)

5:30 PM [Invited] Recent advances in iron-based superconducting wires and tapes - Yanwei Ma (Institute of Electrical Engineering, Chinese Academy of Sciences)
6:00 PM Exhibitor Reception (18:00 - 19:30)
Exhibitor Reception (18:00 - 19:30)
6:00 PM - 7:30 PM
Room: Exhibit Hall (Arizona Ballroom)
Tuesday, June 30, 2015

7:55 AM Cryo Expo Open (9:00 - 17:00)
Cryo Expo Open (9:00 - 17:00)
7:55 AM - 7:55 AM

8:00 AM

8:00 AM - 8:15 AM
Room: Tucson Ballroom EF
8:15 AM
8:15 AM - 9:00 AM
Room: Tucson Ballroom EF
Contributions

8:15 AM The Role of Cryogenics in the U.S. Hydrogen Bomb Program and Vise Versa - Ray Radebaugh (National Institute of Standards and Technology)
9:00 AM Morning Break
Morning Break
9:00 AM - 9:30 AM
Room: Exhibit Hall (Arizona Ballroom)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Liquid Nitrogen Historical and Current Usage of the Central Helium Liquefier at SNS - Brian DeGraff (ORNL)

9:00 AM Construction of the Cryogenic System for IHEP-ADS Injector I - Shaopeng Li (Institute of High Energy Physics(IHEP),Chinese Academy of Science(CAS),China) zhuo zhang (IHEP,CAS,China)

9:00 AM FRIB Cryogenic Plant Status - Kelly Dixon (Jefferson Lab)

9:00 AM Preliminary Design of Helium Refrigeration System for RAON - Sungwoon Yoon (Institute for basic science)

9:00 AM Commissioning of the helium cryogenic system for the HIE-ISOLDE accelerator upgrade at CERN - Nicolas Delruelle (CERN)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM A Study on the CryoTel® DS 1.5 Cryocooler for Higher Cooling Capacity - Yongsu Kim (Ametek Sunpower Inc)

9:00 AM Linear Resonance Compressor for Stirling-Type Cryocoolers Activated by Piezoelectric Stack-Type Elements - Sergey Sobol (Technion - Israel Institute of Technology)

9:00 AM Theoretical and experimental investigations on the performance characteristics of the linear compressor for the pulse tube cryocooler - Lei Zhang (Shanghai Institute of Technical Physics, Chinese Academy of Sciences)

9:00 AM Development of 1 kW Stirling cryocooler with using linear compressor - Junseok Ko (Korea Institute of Machinery & Materials)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Test procedures and functional verification of cryogenic valves considering operating conditions - Michael Boersch (WEKA AG) Pascal Erni (WEKA AG)

9:00 AM Operating parameters of liquid helium transfer lines used with continuous flow cryostats at low sample temperatures - Nico Dittmar (Technische Universitaet Dresden)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Cryogenic System for the Cryomodule Test Stand at Fermilab - Michael White (Fermilab)

9:00 AM Design of a symmetric coupler for superconducting elliptical cavities. - Ralf Eichhorn (Cornell University)

9:00 AM Progress on fabricating seamless RRR Nb tubes for SRF applications - Shreyas Balachandran (Texas A&M University)

9:00 AM Test stand for routine thermal conductivity measurements of SRF cavity material. - Sergey Koshelev (Fermilab)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM CFD Simulation of the Gas Flow in a Pulse Tube Cooler with two Pulse Tubes - Yin Chuanlin (Institute of Cryogenics and Electronics)

9:00 AM Computational Fluid Dynamic Investigation of Loss Mechanisms in a Pulse-Tube Refrigerator - Christopher Dodson (Spacecraft Component Thermal Research Group, Kirtland AFB)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Helium Recovery at the National High Magnetic Field Laboratory - Matt Barrios

9:00 AM Study for cryogenic testing the Super-FRS magnets of FAIR in a new test facility at CERN - Jan Hendrik Derking (CERN)

9:00 AM Design details of the current lead test facility Karlsruhe (CuLTKa) - Thomas Richter (Karlsruhe Institute of Technology (KIT))
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Highly Formable Tantalum Barrier for Nb3Sn Conductors - David Foley (Shear Form, Inc.)

9:00 AM Suppression of persistent-current magnetization of Nb3Sn strands by transport current - Xingchen Xu (the Ohio State University)

9:00 AM Heat Treatment Sensitivity of ITER Nb3Sn Wire for CS Magnets - David McGuire (National High Magnetic Field Laboratory)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Recent NASA/GSFC Cryogenic Measurements of the Total Hemispheric Emissivity of Black Surface Preparations - James Tuttle (NASA/GSFC)

9:00 AM A cryogenic tensile testing apparatus for micro-samples cooled by miniature pulse tube cryocooler - Junjie Wang (Technical Institute of Physics and Chemistry, CAS) Kaixuan Gu (Technical Institute of Physics and Chemistry, CAS) Liubiao Chen (Technical Institute of Physics and Chemistry, CAS)

9:00 AM Materials for damping the PTC-induced thermal fluctuations of the cold-head - Isabel Catarino (Departamento de Física, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa)

9:00 AM Effect of Discontinuities and Penetrations on the Shielding Efficacy of High Temperature Superconducting Magnetic Shields - Rajeev Hatwar (Florida State University)

9:00 AM Material characterisation and preliminary mechanical design for the HL-LHC shielded beam screens operating at cryogenic temperatures. - Cedric Garion (CERN)

9:00 AM Quench detection via Rayleigh scattering based fiber optic distributed sensors - Federico Scurti (NC State University)
11:00 AM SESSION CANCELLED
SESSION CANCELLED
11:00 AM - 12:15 PM
11:00 AM - 12:15 PM
Room: Tucson Ballroom E
Contributions

11:00 AM 330 W Cryocooler Developments and Testing - Nick Emery (Callaghan Innovation)

11:15 AM Commercialisation of pulse tube cryocoolers to produce 330 W and 1000 W at 77 K for liquefaction. - Alan Caughley (Callaghan Innovation)

11:30 AM Large 'pulse-tube' oxygen liquefier for CVN-78 carriers: an update - Philip Spoor (Chart Industries)
11:00 AM - 12:00 PM
Room: Tucson Ballroom F
Contributions

11:00 AM Experimental study of stability and transients in a horizontally heated boiling helium thermosyphon - Hernan Furci (CEA Saclay)

11:15 AM Theoretical analysis and experimental investigation on performance of the thermal shield of accelerator cryomodules by thermo-siphon cooling of liquid nitrogen. - Tripti Sekhar Datta (Inter- University Accelerator Centre. New Delhi. India)

11:30 AM Design and Operation of a Cryogenic Nitrogen Pulsating Heat Pipe - Luis Fonseca (University of Wisconsin Madison)

11:45 AM Experimental investigation of a Hydrogen Pulsating Heat Pipe - Haoren DENG (Zhejiang University)
11:00 AM - 12:00 PM
Room: Tucson Ballroom GH
Contributions

11:00 AM CFD study on the effects of viscous shear in a hot cascade Ranque-Hilsch vortex tube - Nilotpala Bej (Indian Institute of Technology, Kharagpur)

11:15 AM CFD analysis of straight and flared vortex tube - Aman Kumar Dhillon (Indian Institute of Technology, Kharagpur)

11:30 AM Experimental and CFD analyses of a thermal radiation shield dimple plate for cryogenic pump application - Matthieu Scannapiego (Karlsruhe Institute of Technology)

11:45 AM Hierarchy of Two-Phase Flow Models for Autonomous Control of Cryogenic Loading Operation - Dmitry Luchinsky (Mission Critical Technologies)
11:00 AM - 12:30 PM
Room: Tucson Ballroom AB
Contributions

11:00 AM [Invited] The origin of strain sensitivity in Nb3Sn - Matthias Mentink (CERN)

11:30 AM Shift of the Fp-B curve peak of Nb3Sn conductors with very fine grain sizes - Xingchen Xu (the Ohio State University)

11:45 AM Requirements for quadrupole magnet conductor for the United States contribution to the high-luminosity upgrade of the Large Hadron Collider - Lance Cooley (Fermilab)

12:00 PM Improvement of tube type Nb3Sn conductor in Hyper Tech - Xuan Peng (Hyper Tech Research Inc.)

12:15 PM Digital evaluation of filament distortion and RRR degradation in drawn and rolled PIT and RRP® Nb3Sn wires - Michael Brown (Florida State University)
11:00 AM - 12:30 PM
Room: Tucson Ballroom CD
Contributions

11:00 AM Non-destructive characterization of local Ic variation in a long length Bi-2223 tape - Takanobu Kiss (Kyushu University)

11:15 AM Irreversible tensile stress of 2G HTS wires made by IBAD-MOCVD on Hastelloy substrates - Yifei Zhang (SuperPower Inc.)

11:30 AM Mechanical behavior of Bi2Sr2CaCu2O8+x wire with a detailed study of sample preparation techniques - Amir Kajbafvala (Materials Science Center, University of Wisconsin-Eau Claire)

11:45 AM Temperature dependence of critical current and transport current losses of 4 mm YBCO coated conductors manufactured using nonmagnetic substrate - Sastry Pamidi (The Florida State University, Center for Advanced Power Systems)

12:00 PM The Development of Persistent joints for MgB2 Conductors - Mike Sumption (The Ohio State University)

12:15 PM AC LOSSES MODELS FOR LOW-TC SUPERCONDUCTORS - Paulo Augusto (APLICAMA Research Group - Univ Salamanca - SPAIN)
12:30 PM Lunch (on your own)
Lunch (on your own)
12:30 PM - 2:00 PM
2:00 PM
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Testing of a 4 K to 2 K Heat Exchanger with an Intermediate Pressure Drop - Peter Knudsen (Jefferson Lab)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Operational Experiences of J-PARC cryogenic hydrogen system for a spallation neutron source - HIDEKI TATSUMOTO (Japan Atomic Energy Agency)

2:00 PM Design challenges of a 20kW liquid hydrogen cooling system for The European Spallation Source cold moderators. - Jesper Ringnér (ESS) John Jurns (European Spallation Source ESS AB)

2:00 PM Pressure and temperature fluctuation simulation of J-PARC cryogenic hydrogen system - HIDEKI TATSUMOTO (Japan Atomic Energy Agency)

2:00 PM The hydrogen circulation cold box of CSNS cryogenic system - Guoping Wang (Institute of High Energy Physics(IHEP)) yaqiong wang (Institute of High Energy Physics)

2:00 PM Experimental investigation of 20 K two-stage layered active magnetic regenerative refrigerator - Inmyong Park (KAIST)

2:00 PM Thermo-physical performance prediction of the KSC Ground Operation Demonstration Unit for liquid hydrogen - JONG BAIK (FLORIDA SOLAR ENERGY CENTER)

2:00 PM Performance evaluation of a developed orifice type heater for thermal compensation control at J-PARC cryogenic hydrogen system - HIDEKI TATSUMOTO (Japan Atomic Energy Agency)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Prediction of two-phase pressure drop in heat exchanger for mixed refrigerant Joule–Thomson cryocooler - Milind Atrey (Indian Institute of Technology Bombay) P M Ardhapurkar (SSGMCE Shegaon, India)

2:00 PM Second-Law Analysis of a Cascade Joule-Thomson Microcooler - Christopher Dodson (Air Force Research Labs) Kyle Martin (Applied Technology Associates) Tomas Fraser (Air Force Research Labs)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM First helium measurements with a new cryogenic flow meter - Andreas Janzen (Karlsruhe Institute of Technology, Institute for Technical Thermodynamics and Refrigeration)

2:00 PM Cryogenic thermometry for refrigerant distribution system of JT-60SA - Kyohei Natsume (Japan Atomic Energy Agency)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Testing and analytical modeling for purging process of a cryogenic line - Ali Hedayat (NASA-MSFC)

2:00 PM Optimization of Cryogenic Chilldown and Loading Operation Using SINDA/FLUINT - Ali Kashani (Millennium Engineering & Integration Company)

2:00 PM Multi-slope warm-up calorimetry of Integrated Dewar-Detector Assemblies - Alexander Veprik (SCD)

2:00 PM Astro-particle shielding superconducting magnet cryogenic design for space travel missions - Bertrand Baudouy (CEA Saclay)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Estimation of magnetocaloric properties by using Monte Carlo method for AMRR cycle - Ryosuke Arai (Environment and Energy Materials Division, National Institute for Materials Science)

2:00 PM Liquid hydrogen Moderator optimization for Neutron Sources with high brilliance - Yannick Bessler (Forschungszentrum Jülich)

2:00 PM Effect of operating frequency and phase angle on performance of Alpha Stirling cryocooler driven by a novel compact mechanism - SHRIDHAR BAPAT (Department of Mechanical Engineering, Indian Institute of Technology Bombay)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Liquid Nitrogen Spray Cooling for Superconducting Power Cable - Jacob Kephart (Navy)

2:00 PM Modelling and Testing of Fin-type Heat Exchangers for the ITER Current Leads - Pierre Bauer (ITER Organization)

2:00 PM Solid-cryogen-stabilized, cable-in-conduit superconductor cables - Leslie Bromberg (Massachusetts Institute of Technology)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Contribution to the study of neon-nitrogen mixtures at low temperatures - Patrícia Borges de Sousa (LIBPhys, Physics Department, Faculty of Sciences and Technology, Universidade Nova de Lisboa)

2:00 PM Visual investigation of solid-liquid phase equilibria for non-flammable mixed refrigerant - Cheonkyu Lee (KAIST)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Final Report on the Controlled Cold Helium Spill Test in the LHC Tunnel at CERN - Laetitia Dufay-Chanat (CERN)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Numerical and Experimental Investigation of the Electromechanical Behavior of REBCO Tapes and Cables - Nathaniel Allen (Tufts University)

2:00 PM Optimized and practical electrical joints for CORC type HTS cables - Tim Mulder (CERN / Twente Technical University (NL))

2:00 PM Analytical Investigation in Bending Characteristic of Twisted Stacked-Tape Cable Conductor - Makoto Takayasu (MIT)

2:00 PM Current sharing, quench, and normal zone propagation in YBCO CORC and Roebel cables - Milan Majoros (The Ohio State University)

2:00 PM Measurements of magnetization of YBCO CORC and Roebel Cables at 4.2 K - Milan Majoros (The Ohio State University)

2:00 PM DESIGNING VAPOUR-COOLED AND FORCED-FLOW COOLED CURRENT LEADS FOR A NEW SEPARATING DEVICE - Paulo Augusto (APLICAMA Research Group - Univ Salamanca - SPAIN)

2:00 PM Critical Current Properties of HTS Twisted Stacked-Tape Cable in Subcooled Liquid Nitrogen - Masaru Tomita (Railway Technical Research Institute)
2:00 PM - 4:00 PM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

2:00 PM Relationship between the Thermal Expansion and Spontaneous Magnetization in LaFe13-xAlx (1.2≤x≤1.8) Rare Earth Intermetallic Compounds - Rongjin Huang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, P.R. China)

2:00 PM Study of Thermocurrents in SCRF cavities via measurements of the Seebeck Effect in niobium, titanium, and stainless steel thermocouples - Victoria Cooley (University of Wisconsin-Madison)

2:00 PM Low-temperature negative thermal expansion in Al doped La(Fe,Si)13 compounds - Rongjin HUANG (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, P.R. China)
3:00 PM Afternoon Break
Afternoon Break
3:00 PM - 3:30 PM
Room: Exhibit Hall (Arizona Ballroom)
4:00 PM
4:00 PM - 5:45 PM
Room: Tucson Ballroom E
Contributions

4:00 PM The Evolution of the Cryogenic System of the European Spallation Source - Wolfgang Hees (European Spallation Source ESS AB)

4:15 PM Cryogenic infrastructure supplied by Linde Kryotechnik AG for the Series Magnet Test Facility for FAIR - Jan Hildenbeutel (Linde Kryotechnik AG)

4:30 PM Performance analysis of cryogenic system and cryomodules for the complete superconducting linear accelerator at IUAC, New Delhi. - Tripti Sekhar Datta (Inter- University Accelerator Centre. New Delhi. India)

4:45 PM Cryogenic Supply for the Facility for Antiproton and Ion Research - Holger Kollmus (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

5:00 PM Cryogenic System for Turkish Accelerator Center - Simon CRISPEL (AIR LIQUIDE)

5:15 PM Local Cryogenics for the SIS100 at FAIR - Thomas Eisel (GSI)

5:30 PM Helium Sourcing ... Calmer seas ahead ? - David Grillot (Air liquide)
4:00 PM - 6:00 PM
Room: Tucson Ballroom F
Contributions

4:00 PM [Invited] Superconducting Detector Magnets for the proposed 100 TeV Future Circular Collider - Herman H. J. Ten Kate (CERN - Physics Department)

4:30 PM Performance of the cold powered diodes and diode leads in the main magnets of the LHC - Gerard Willering (CERN)

4:45 PM Dimensional Changes of Nb3Sn Cables during Heat Treatment* - Ian PONG (L)

5:00 PM Design and manufacture of the large-bore 8T superconducting solenoid for the NAFASSY test facility - Antonio della Corte (ENEA - C.R. Frascati, Italy)

5:15 PM Testing of a sub-scale HTS coil for wind turbine generator - Philippe Masson (University of Houston)

5:30 PM Quench Characteristics of Conduction-cooled 6T NbTi Magnet System - soumen kar (Inter-University Accelerator Centre)

5:45 PM Development of integrated superconducting Quadrupole Doublet Modules for operation in the SIS100 Accelerator - Jan Patrick Meier (GSI Helmholtzzentrum für Schwerionenforschung GmbH) Jorge Ceballos Velasco (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
4:00 PM - 5:30 PM
Room: Tucson Ballroom GH
Contributions

4:00 PM Applications of Ortho-Para Hydrogen Catalyst - GLEN MCINTOSH (MCINTOSH CRYOGENICS LLC)

4:15 PM Modification of liquid hydrogen tank for integrated refrigeration and storage - Adam Swanger (NASA Kennedy Space Center)

4:30 PM Ground Operations Demonstration Unit for Liquid Hydrogen Initial Test Results - Bill Notardonato (NASA Kennedy Space Center)

4:45 PM Spallation Target Cryogenic Cooling Design Challenges at The European Spallation Source - John Jurns (European Spallation Source ESS AB)

5:00 PM Total Hydrocarbon Accumulation in Liquid Oxygen Storage Systems - Barry Meneghelli (VENCORE - Kennedy Space Center)

5:15 PM Simulated Propellant Loading System: Testbed for Cryogenic Component and Control Systems Research & Development - Jaime Toro Medina (NASA Kennedy Space Center)
4:00 PM - 6:00 PM
Room: Tucson Ballroom IJ
Contributions

4:00 PM Cryogenic system options for a superconducting aircraft propulsion system - Frederick Berg (Airbus Group)

4:15 PM Impact of Cryogenic/Superconducting Components for Hybrid-Electric Aircraft Propulsion - Timothy Haugan (U.S. Air Force Research Laboratory)

4:30 PM Development of HTS induction/synchronous drive motor aiming for low carbon emission transportation systems - Taketsune Nakamura (Kyoto University)

4:45 PM An overview of Ball cryogen storage and delivery dewar systems - Jennifer Marquardt (Ball)

5:00 PM A conceptual study on the use of a regenerator in a hybrid energy storage unit (LIQHYSMES) - Flavio Brighenti (Karlsruhe Institute of Technology)

5:15 PM Conceptual Design and Thermal Analysis of a modular Cryostat for one single coil of a 10 MW Offshore Superconducting Wind Turbine - Jiuce Sun (Karlsruhe Institute of Technology)

5:30 PM LNG systems for natural gas propelled ships - Jaroslaw Polinski (Wroclaw University of Technology)

5:45 PM Exergy analysis of LNG boil-off gas reliquefaction systems - KANCHAN CHOWDHURY (Cryogenic Engineering Centre, Indian Institute of Technology) PARTHASARATHI GHOSH (Cryogenic Engineering Centre, Indian Institute of Technology)
4:00 PM - 6:00 PM
Room: Tucson Ballroom AB
Contributions

4:00 PM [Invited] High Performance REBCO Coated Conductors for High Field and AC Applications - Venkat Selvamanickam (University of Houston)

4:30 PM [Invited] Production and integration of 2G HTS tapes into HTS devices - Alexander Molodyk (SuperOx)

5:00 PM Continuous Improvement at SuperPower of 2G HTS Wire for Demanding Applications - Drew Hazelton (SuperPower Inc.)

5:15 PM Transverse, axial and torsional strain tests on REBCO tapes as a basis for CORC modeling - Arend Nijhuis (University of Twente)

5:30 PM Conductance Degradation in HTS Coated Conductor Solder Joints - Edgar Canavan (NASA–Goddard Space Flight Center)

5:45 PM Persistent Current Characteristics at Temperatures Below 77K in Closed Superconducting Loops Made Out of RE123 Coated Conductors - Charles Rong (U.S. Army Research Laboratory)
4:00 PM - 6:00 PM
Room: Tucson Ballroom CD
Contributions

4:00 PM Effect of microstructure on high-cycle fatigue properties of Alloy718 plates - Yoshinori Ono (National Institute for Materials Science)

4:15 PM TENSILE AND FATIGUE QUALIFICATION TESTING of ITER-CS CONDUIT ALLOY JK2LB - Robert Walsh (Florida State University)

4:30 PM The Mechanical and material properties of 316LN austenitic stainless steel for the fusion application in cryogenic temperatures - Jan Sas (The Karlsruhe Institute of Technology)

4:45 PM Anisotropic fracture toughness properties of a Nitronic 50 forging at 4.2 K - Arman Nyilas (Cryogenic Engineering & Materials Expertise)

5:00 PM Permanent effect of a cryogenic spill on fracture properties of structural steels - Ida Westermann (Norwegian University of Science and Technology)

5:15 PM Hydrogen Environment Embrittlement on Austenitic Stainless Steels from Room Temperature to Low Temperatures - Toshio OGATA (National Institute for Materials Science)

5:30 PM Tensile properties and conductivities of a precipitation hardened and cold-rolled Cu-0.3Cr-0.1Zr alloy at cryogenic temperature - Osamu Umezawa (Yokohama National University)

5:45 PM High-entropy alloys prepared by high-gravity combustion synthesis and their cryogenic properties - Jiangtao Li (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)
Wednesday, July 1, 2015

7:55 AM Cryo Expo Open (9:00 - 12:00)
Cryo Expo Open (9:00 - 12:00)
7:55 AM - 7:55 AM
Room: Exhibit Hall (Arizona Ballroom)

8:00 AM

8:00 AM - 8:15 AM
Room: Tucson Ballroom EF
8:15 AM
8:15 AM - 9:00 AM
Room: Tucson Ballroom EF
Contributions

8:15 AM Superconducting Turboelectric Distributed Aircraft Propulsion - Michael Armstrong (Rolls-Royce North American Technologies Inc)
9:00 AM Morning Break
Morning Break
9:00 AM - 9:30 AM
Room: Exhibit Hall (Arizona Ballroom)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM A Simulink Library of cryogenic components to automatically generate control schemes for large Cryorefrigerators. - François BONNE (CEA/SBT)

9:00 AM Dynamic simulation of mixed refrigerant process for small-scale LNG plant - Tianbiao He (Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Design of the control system for the cryogenic distribution systems of the European XFEL project - Torsten Boeckmann (DESY)

9:00 AM The Fermilab Muon Campus g-2 Cryogenic Distribution Remote Control System - Liujin Pei (Fermi National Accelerator Laboratory)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Transient heat transfer from a wire to a forced flow of subcooled liquid hydrogen passing through a vertically-mounted pipe - HIDEKI TATSUMOTO (Japan Atomic Energy Agency)

9:00 AM Numerical Simulation of Heat Transfer for Wall-type and Fin-type Heat Exchanger - Guochao Feng (Technical Institute of Physics and Chemistry of Chinese Academy of Science) Linghui Gong (Technical Institute of Physics and Chemistry of Chinese Academy of Science) Peng Xu (Technical Institute of Physics and Chemistry of Chinese Academy of Science)

9:00 AM Film Boiling Heat Transfer from a Wire to Upward Flow of Liquid Hydrogen and Liquid Nitrogen - Masahiro Shiotsu (Kyoto University)

9:00 AM Forced flow heat transfer from a round wire in a vertically-mounted pipe to supercritical hydrogen - daisuke Higa (Kyoto university)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM An Analytical Approach to Designing a Thermosiphon Cooling System for Large Scale Superconducting Magnets - Nandhini Dhanaraj (Fermi National Accelerator Laboratory)

9:00 AM RECENT PROGRESS OF CRYOGENIC SYSTEM FOR 40T HYBRID MAGNET - JunJie LI (High Magnetic Field Laboratory, Chinese Academy Sciences) Zheng Rong OUYANG (High Magnetic Field Laboratory, Chinese Academy Sciences)

9:00 AM Thermal Analysis of Superconducting Undulator (SCU) Cryomodules - Yuko Shiroyanagi (Argonne National Laboratory)

9:00 AM Gas gap heat switch for a Cryogen-free magnet system - Isabel Catarino (LIBPhys-UNL, Departamento de Física, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa) Jorge Barreto (LIBPhys-UNL, Departamento de Física, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa)

9:00 AM Cryogenic Considerations for Superconducting Magnet Design for the Material Plasma Exposure eXperiment - Robert Duckworth (Oak Ridge National Laboratory)

9:00 AM Thermal-hydraulic analysis of transients in the HELIOS loop including a CICC section - roberto zanino (politecnico di torino)

9:00 AM Performance of conduction-cooled HTS Magnet in radio blackout mitigation experiment - Sonja Schlachter (Karlsruhe Institute of Technology)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Air Liquide latest developments of turbomachines : from design to commissioning - Cecile Gondrand (Air Liquide Advanced Technologies)

9:00 AM Influence of thermophysical properties of working fluid on the design of cryogenic turboexpanders using ns-ds diagram - ASHISH ALEX SAM (Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur, India) PARTHASARATHI GHOSH (Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur, India)

9:00 AM Predicting performance of axial pump of lox booster turbopump of staged combustion cycle based rocket engine using CFD - Parthasarathi Ghosh (Cryogenic engineering centre, Indian Institute of Technology Kharagpur, India)

9:00 AM Development of linear compressor for compact 2K Gifford-McMahon cryocoolers - YOSHIKATSU HIRATSUKA (Technology Research Center, Sumitomo Heavy Industries, Ltd.)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM High Strain and Twisting Tolerance in AIMI and PIT MgB2 Strands - Yuan Yang (OSU)

9:00 AM Effect of Transport Current on Magnetization of an IBAD Coated Conductor - Cory Myers (Ohio State University)

9:00 AM Effect of heat treatment and test barrel materials on critical current measurements of Ag/Bi2212 round wires using ITER barrel configurations - Tengming Shen (Fermilab)

9:00 AM Assessment of Critical Factors Affecting the Performance of Trapped Field Magnets using Thin Film Superconductor Tapes - Kavita Selva (Clear Lake High School)
9:00 AM - 11:00 AM
Room: Exhibit Hall (Arizona Ballroom)
Contributions

9:00 AM Insulation system for high temperature superconductor cables - Philip Michael (MIT - Plasma Science and Fusion Center)

9:00 AM Thermal and mechanical properties of impregnation materials for HTS cables and coils - Nadezda Bagrets (Karlsruhe Institute of Technology – KIT)

9:00 AM Thermal and mechanical properties of selected 3D printed thermoplastics in the cryogenic temperature regime - Klaus-Peter Weiss (KIT, Institute for Technical Physics)

9:00 AM Tensile strengths of polyamide based 3D printed polymers in liquid nitrogen - Elijah Shoemake (HYdrogen Properties for Energy Research (HYPER) Laboratory, Washington State University)
11:00 AM
11:00 AM - 12:15 PM
Room: Tucson Ballroom E
Contributions

11:00 AM ARIEL E-linac Cryogenic System: Commissioning and First Operational Experience - Alexey Koveshnikov (TRIUMF)

11:15 AM Commissioning and Operational Results of Helium Refrigeration System at JLab for the 12GeV Upgrade - Peter Knudsen (Jefferson Lab)

11:30 AM Commissioning and Operational Results of the 12 GeV Helium Compression System at JLab - Peter Knudsen (Jefferson Lab)

11:45 AM Cryogenic System Operating Experience at SNS - Matthew Howell (UT Battelle/ORNL)

12:00 PM 2K Pump Down Studies at SNS - Matthew Howell (UT Battelle/ORNL)
11:00 AM - 12:15 PM
Room: Tucson Ballroom F
Contributions

11:00 AM Robotic Resupply Mission III Cryogen Demonstration System Progress - C. Hudson DeLee (NASA GSFC) Robert Boyle (NASA)

11:15 AM Using In-situ Cryogenic Radiometers to Measure the Performance of a Large Thermal Vacuum Chamber - Michael DiPirro (NASA/Goddard Space Flight Center)

11:30 AM Performance test of a 1 L liquid hydrogen fuel tank for unmanned aerial vehicles. - Nathaniel Garceau (Hylium Industries Inc.)

11:45 AM Cryogenics on the Stratospheric TeraHertz Observatory - Gary Mills (Ball Aerospace)
11:00 AM - 12:15 PM
Room: Tucson Ballroom GH
Contributions

11:00 AM Helium–Hydrogen PVT-x Measurements and Equation of State - Ian Richardson (Washington State University)

11:15 AM Cryogenic Thermal Characteristics of Gaseous Helium mixtures with Neon and Hydrogen at High Pressures - Sastry Pamidi (The Florida State University)

11:30 AM Description and validation of the Little correlation for boiling zeotropic mixtures in horizontal tubes from cryogenic to room temperature - Rodrigo Barraza (University of Wisconsin-Madison)

11:45 AM Thermodynamic optimization of mixed refrigerant Joule Thomson systems constrained by heat transfer considerations - Jacob Hinze (University of Wisconsin-Madison)

12:00 PM Molecular dynamics for homogeneous nucleation of water and carbon dioxide in different carrier gases - Raluca Dumitrescu (Eindhoven University of Technology)
11:00 AM - 12:15 PM
Room: Tucson Ballroom IJ
Contributions

11:00 AM Numerical simulation and experimental investigation of a novel Scotch yoke for a Gifford-McMahon cryocooler - Mingyao Xu (Sumitomo Heavy Industries, Ltd.)

11:15 AM Design of an improved high-cooling-power 4.2 K stage G-M cryocooler and helium compressor - Xihuan Hao (Advanced Research Systems, Inc.)

11:30 AM Recent development status of compact 2K GM cryocoolers - Qian Bao (Sumitomo Heavy Industries, Ltd.)

11:45 AM Cool-down acceleration for G-M cryocoolers with thermal oscillations passively damped by helium - Robert Webber (Hypres, Inc.)

12:00 PM Recent Development Status of High-Capacity 4K Pulse Tube Cryocooler - Xiaogang Lin (Sumitomo Heavy Industries,Ltd.)
11:00 AM - 12:30 PM
Room: Tucson Ballroom AB
Contributions

11:00 AM [Invited] LOW TEMPERATURE- HIGH FIELD PERFORMANCES OF IRON CALCHOGENIDES THIN FILMS - carlo ferdeghini (CNR)

11:30 AM MOI study of grain boundary transparencies in [001] tilt (Yb0.7Ca0.3)Ba2Cu3O7-d 6 and 9 degree bi-crystal thin films. - Anatolii Polyanskii (FSU, NHMFL, ASC)

11:45 AM Significant Enhancement of Bc2 at 20-25 K for MgB2 Thin Films via Controlled oxygen doping - Guangze Li (The Ohio State University)

12:00 PM Structure and properties of oxygen-containing thin MgB2 films - Tatiana Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine)

12:15 PM Large Jc enhancement and matching effects by Ba2Y(Nb/Ta)O6 nanocolumns in YBa2Cu3O7-x thin films - Jens Haenisch (Karlsruhe Institute for Technology)
11:00 AM - 12:30 PM
Room: Tucson Ballroom CD
Contributions

11:00 AM Kinetic Analysis of MgB2 Layer Formation in Advanced Internal Magnesium Infiltration (AIMI) Processed MgB2 wires - Guangze Li (The Ohio State University)

11:15 AM [Invited] Development of MgB2 superconductors and coils for practical applications - Mike Tomsic (Hyper Tech Research)

11:45 AM Development of powder-in-tube-processed multifilamentary MgB2 long wires with different reinforcement structure - Xifeng PAN (Western Superconducting Technologies Co . Ltd.)

12:00 PM Synthesis of Nanoscale Magnesium Diboride Powder - Douglas Finnemore (Ames Laboratory, Iowa State University)

12:15 PM Correlation of critical current density of bulk MgB2 having high connectivity between SC grains with concentration and distribution of higher magnesium borides and oxygen-enriched inhomogeneities, the role of Ti additions - Tatiana Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine)
12:30 PM Lunch (on your own)
Lunch (on your own)
12:30 PM - 2:00 PM
2:00 PM
2:00 PM - 3:00 PM
Room: Tucson Ballroom CD
Contributions

2:00 PM Status and commissioning results of the helium refrigerator plant for the European XFEL - Lars Blum (Linde Kryotechnik AG)

2:15 PM Experience with cryogenic operation of Accelerator Module Test Facility during testing of one third of XFEL cryomodules - Bernd Petersen (DESY)

2:30 PM CERN experience and strategy for the maintenance of cryogenic plants and distribution systems - Luigi Serio (CERN)

2:45 PM 5-year operation experience with the 1.8 K refrigeration units of the LHC cryogenic system - Gerard Ferlin (CERN)
2:00 PM - 3:45 PM
Room: Tucson Ballroom F
Contributions

2:00 PM Experimental characterization of the ITER TF structure cooling in HELIOS test facility - Bernard ROUSSET (CEA Grenoble) Christine Hoa (CEA SBT)

2:15 PM Test of heat load smoothing strategies for the ITER Toroidal Field coils by means of Artificial Neural Networks - laura savoldi (Politecnico di Torino)

2:45 PM Lessons learned concerning the Cool-down of Superconducting Magnets using a Thermal Siphon Cooling-loop - Michael Green (Michigan State University)

3:00 PM Capillary cooling of superconducting coils - Alphons de Waele (Oswald Elektromotoren GmbH)

3:15 PM Thermal analysis of the cold mass of the 2 T solenoid for the PANDA detector at FAIR - Gabriella Rolando (CERN)

3:30 PM Forced Two-Phase Helium Cooling Scheme for Mu2e Transport Solenoid - Grzegorz Tatkowski (Fermilab)
2:00 PM - 3:45 PM
Room: Tucson Ballroom GH
Contributions

2:00 PM Mechanical Robustness of Cryogenic Temperature Sensors Packaged in a Flat, Hermetically-Sealed Package - Scott Courts (Lake Shore Cryotronics, Inc.)

2:15 PM A study on intermediate buffer layer of a coated Fiber Bragg Grating cryogenic temperature Sensors. - Rajinikumar Ramalingam

2:30 PM Series Supply of Cryogenic Venturi Tube Flowmeters for the ITER Project - Jérôme ANDRE (CEA-SBT, 17 rue des Martyrs, 38054 Grenoble Cedex 9, France)

2:45 PM Superconducting characteristics of MgB2 short wires of long level sensor for liquid hydrogen - Minoru Takeda (Kobe University)

3:00 PM Fast-response, active gas-gap heat switches for low temperature applications - Peter Shirron (NASA/GSFC)

3:15 PM Dynamic simulations of the cryogenic system of a tokamak - Bernard ROUSSET (CEA Grenoble)

3:30 PM RF heat load compensation with electrical heater for XFEL accelerator - measurements at CMTB, AMTF and FLASH - Sergiy Putselyk (Deutsches Elektronen-Synchrotron (DESY))
2:00 PM - 3:15 PM
Room: Tucson Ballroom IJ
Contributions

2:00 PM Safety related issues of the unexpected Argon release into the tunnel - Ziemowit Malecha (Wroclaw Univ of Technology)

2:30 PM Review of failure rate input parameters to risk analysis of cryogenic systems - Agnieszka Piotrowska (Wroclaw University of Technology)

2:45 PM Commissioning of the Cryogenic Safety Test Facility PICARD - Carolin Heidt (Karlsruhe Institute of Technology (KIT))

3:00 PM Numerical and experimental verification of physical blast thermodynamic model - Artur Iluk (Technical University of Wroclaw)
2:00 PM - 4:00 PM
Room: Tucson Ballroom AB
Contributions

2:00 PM [Invited] Advances in Overpressure Processing Bi-2212 Insert Coils in a New, Large Overpressure Furnace - Eric Hellstrom (Applied Superconductivity Center, National High Magnetic Field Laboratory, Florida State University)

2:30 PM Effects of oxygen doping on vortex pinning and connectivity in highly dense Bi-2212 round wire - Yavuz Oz (National High Magnetic Field Laboratory)

2:45 PM Suppression of magnetization and creep in Bi2212 strands - Cory Myers (Ohio State University)

3:00 PM Progress towards commercial 2212 by the integrated development of powder and wire processes - Alexander Otto (Solid Material Solutions, LLC)

3:15 PM Nanoparticle Ag-enhanced textured-powder Bi-2212/Ag wire technology - Joshua Kellams (Texas A&M University)

3:30 PM Synthesis of Bi2Sr2CaCu2Ox oxide precursor from nano-oxides and its relationship with multifilamentary wire transport properties - YUN ZHANG (North Carolina State University)

3:45 PM Processing of Bi2Sr2CaCu2Ox superconductors via direct oxidation of metallic precursors - YUN ZHANG (North Carolina State University)
2:00 PM - 4:10 PM
Room: Tucson Ballroom E
Contributions

2:00 PM [Invited] Superconducting Wind Generators: Development and Challenges - Philippe Masson (University of Houston)

2:40 PM [Invited] Feasibility study project to realize the merits of 10 MW-class superconducting wind turbine generators - Hirofumi Yamasaki (National Institute of Advanced Industrial Science and Technology)

3:20 PM [Invited] Cost Comparison Studies of Different Superconductors for a Direct Drive Wind Generator - Haran Karmaker (TECO Westinghouse)
4:00 PM Afternoon Break
Afternoon Break
4:00 PM - 4:15 PM
Room: Arizona Ballroom Foyer
4:15 PM
4:15 PM - 5:45 PM
Room: Tucson Ballroom GH
Contributions

4:15 PM [Invited] Heat transfer during bubble shrinking in saturated He II under microgravity condition - Suguru Takada (National Institute for Fusion Science)

4:45 PM [Invited] Study of Temperature Wave Propagation in Superfluid Helium to Cool Radio-Frequency Cavities - Torsten Koettig (CERN)

5:15 PM Study of He II Boiling Flow Field around a Heater - Masahide Murakami (University of Tsukuba)

5:30 PM Implementation of the thermodynamic and phase transition equations of superfluid helium in a CFD software - romain bruce (CEA Saclay)
4:15 PM - 5:30 PM
Room: Tucson Ballroom IJ
Contributions

4:15 PM Thermodynamic analysis of a intermediate cooled heat exchanger working in high temperature ratio for Joule-Thomson cooler - Xuan Tao (Institute of Refrigeration and Cryogenics,Zhejiang University)

4:30 PM Performance analysis of a miniature Joule-Thomson cryocooler with and without the distributed J-T effect - Milind Atrey (Indian Institute of Technology Bombay) Rashmin Damle (IIT Bombay)

4:45 PM Modeling the Adsorption of Mixed-Gases Based on Pure Gas Adsorption Properties - Nir Tzabar (University of Twente)

5:00 PM Development of a sorption-based Joule-Thomson cooler for the METIS instrument on E-ELT - Marcel ter Brake (University of Twente, The Netherlands)

5:15 PM Reduction in variation in refrigeration temperature for a sorption compressor based J-T cooler - SHRIDHAR BAPAT (Mechanical Engineering Department, Indian Institute of Technology Bombay, Mumbai 400076, India)
4:15 PM - 5:45 PM
Room: Tucson Ballroom E
Contributions

4:15 PM [Invited] Demonstration of Advanced Superconductors with Four-fold Improved Performance for High Power Wind Generators - Venkat Selvamanickam (University of Houston)

4:35 PM [Invited] High Field Superconducting Machines - Kiruba Haran (University of Illinois)

4:55 PM [Invited] Modular and Repairable Superconducting Wind Turbine Generators 5-20MW - Michael Tomsic (Hyper Tech)

5:15 PM Panel Wrap-up & Discussion
7:00 PM Banquet Event (19:00 - 21:00)
Banquet Event (19:00 - 21:00)
7:00 PM - 9:00 PM
Room: Arizona Ballroom
Thursday, July 2, 2015
8:00 AM
8:00 AM - 8:45 AM
Room: Tucson Ballroom EF
Contributions

8:00 AM UPS LNG Use & Future Intended Use - Michael Britt (UPS)
8:45 AM Morning Break
Morning Break
8:45 AM - 9:00 AM
Room: Arizona Ballroom Foyer
9:00 AM
9:00 AM - 9:30 AM
Room: Tucson Ballroom AB
Contributions

9:00 AM Cold head maintenance with minimal service interruption - Alexey Radovinsky (MIT Plasma Science and Fusion Center) Philip Michael (MIT Plasma Science and Fusion Center)

9:15 AM Periodic Flow Hydrodynamic Resistance Parameters for ErPr Rare-Earth Regenerator Material at Cryogenic Temperatures - Matthew Perrella (Georgia Institute of Technology)
9:00 AM - 10:15 AM
Room: Tucson Ballroom CD
Contributions

9:00 AM Study on A Cascade Pulse Tube Cooler with Energy Recovery: New Method for Approaching Carnot - Longyi Wang (Institute of Refrigeration and Cryogenics, Zhejiang University)

9:15 AM Two-stage pulse tube refrigerator with step displacer as phase shifter - Shaowei ZHU (School of Mechanical Engineering, Tongji University)

9:30 AM Experimental verification of cylindrical adjustable inertance tube for pulse tube refrigerators - John Pfotenhauer (Adviser, second author)
9:00 AM - 10:15 AM
Room: Tucson Ballroom GH
Contributions

9:00 AM A new cryogenic test facility for large superconducting devices at CERN - Antonio Perin (CERN)

9:15 AM Progress and Status of Cryogenic Refrigeration System for Project Hydra - Jie Yuan (AMSC)

9:30 AM Cryogenic turbulence test facilities at CEA/SBT - Alain Girard (CEA) Bernard Rousset (CEA)

10:00 AM The process design of the forced-flow cooled for CFETR CS model coil - Qiyong Zhang (Institute of Plasma Physics, Chinese Academy of Sciences)
9:00 AM - 10:45 AM
Room: Tucson Ballroom IJ
Contributions

9:00 AM Experimental comparison of Pressure ratio in Alpha and Gamma Stirling cryocoolers with identical compression space volumes and driven simultaneously by a solitary novel compact mechanism - SHRIDHAR BAPAT (Department of Mechanical Engineering, Indian Institute of Technology Bombay)

9:15 AM A Cryogen Recycler with Pulse Tube Cryocooler for Simultaneously Recondensing Helium and Nitrogen - Chao Wang (Cryomech)

9:30 AM A dynamic optical measurement system for cryogenic fluids using laser interferometry - jinhui zhang (Zhejiang University)

9:45 AM New developments in Joule Thomson microcooling at the University of Twente - Haishan Cao (University of Twente)

10:00 AM 15 K LIQUID HYDROGEN THERMAL ENERGY STORAGE UNIT FOR FUTURE ESA SCIENCE MISSIONS - Patrícia Borges de Sousa (LIBPhys, Physics Department, Faculty of Sciences and Technology, Universidade Nova de Lisboa)

10:30 AM High Precision Interferometric Dilatometer For Cryogenic Environments. - Nikolay Tsyrulin (attocube systems AG)