Workshop on Nb3Sn technology for accelerator magnets
Espace St Martin
Paris, France, Espace St Martin
A series of workshops related to the use of Nb3Sn Rutherford cable in accelerator magnets has been launched by CEA and CERN. The goals of this series are:
After the first workshop held in Madrid in November 2017 (1st workshop website ), the 2nd workshop, organized jointly by CEA and CERN will take place in Paris at ESPACE SAINT MARTIN from 11 to 12 October 2018. This edition will focus on:
The Workshop is open to scientists and engineers involved in the development of Nb3Sn accelerator magnets worldwide. Registration is open. The deadline for registration is Wednesday, 10 October 2018.
The Workshop organizers are delighted to invite the participants to a complementary Workshop dinner on Thursday 11 October in the center of Paris (restaurant Le Train Bleu). Please register in the registration form.
For administrative questions, please contact armelle.le-noa@cea.fr or severine.candau@cea.fr |
|
Scientific Committee: Maria Durante maria.durante@cea.fr, Hélène Felice helene.felice@cea.fr, Pierre Manil pierre.manil@cea.fr @ CEA Paris-Saclay Bernardo Bordini bernardo.bordini@cern.ch, Paolo Ferracin paolo.ferracin@cern.ch, Friedrich Lackner friedrich.lackner@cern.ch @ CERN |
-
-
Doors open: badges Salle LOUXOR, 3rd floor (Espace St Martin)
Salle LOUXOR, 3rd floor
Espace St Martin
-
Welcome adress (Pierre Védrine) / Workshop introduction (Pierre Manil) Salle LOUXOR, 3rd floor (Espace St Martin)
Salle LOUXOR, 3rd floor
Espace St Martin
Convener: Pierre Vedrine (Université Paris-Saclay (FR)) -
Coil technology - Impregnation process / influence of process on coil dimensions Salle LOUXOR, 3rd floor (Espace St Martin)
Salle LOUXOR, 3rd floor
Espace St Martin
Conveners: Friedrich Lackner (CERN), Paolo Ferracin (CERN)-
1
Coil technology - Impregnation process / Influence of process on coil dimensions - Session IntroductionSpeakers: Chairs: Friedrich Lackner et Paolo Ferracin, Friedrich Lackner (CERN), Paolo Ferracin (CERN)
-
2
Coil Impregnation Proccesses and Experiences at FNALSpeaker: Steve Krave (Fermilab)
-
3
CCT assembly and impregnation at PSISpeaker: Bernhard Auchmann (CERN)
-
4
Flexible tooling used for impregnation of CCT R&D magnetsSpeaker: Eric Anderssen (Lawrence Berkeley National Lab (US))
-
10:40
Pause - café
-
5
Impregnation of Nb3Sn coils at CERNSpeaker: Sandra Tavares (CERN)
-
6
Dimensional measurements of Nb3Sn coils after impregnationSpeaker: Salvador Ferradas Troitino (Centro de Investigaciones Energéti cas Medioambientales y Tecno)
-
1
-
12:10
Pause - déjeuner Paris, France
Paris, France
-
Material aspects / characterization Salle LOUXOR, 3rd floor (Espace St Martin)
Salle LOUXOR, 3rd floor
Espace St Martin
Conveners: Maria Durante (Université Paris-Saclay (FR)), Pierre Manil (Université Paris-Saclay (FR))-
7
Material aspect / characterization - Session IntroductionSpeakers: Chairs: Pierre Manil et Maria Durante, Maria Durante (Université Paris-Saclay (FR))
-
8
EXTERNAL POINT OF VIEW: Contribution of a multi-scale approach to model and characterize supraconducting composites.Speaker: Véronique AUBIN (Centrale Supélec)
-
a) Contribution of a multi-scale approach to model and characterize supraconducting composites.
-
-
9
Multi-scale characterization and behaviour laws of Nb3Sn strandsSpeaker: Gilles LENOIR (CEA Paris-Saclay)
-
10
EXTERNAL POINT OF VIEW: Measuring in-plane displacement and strain fields with the grid method. A feasibility study on superconducting magnetSpeaker: Michel GREDIAC (Université de Clermont-Ferrand)
-
15:30
Pause - café
-
11
Measurement of Nb3Sn and Cu loading stress evolution in Rutherford cable stacks as a function of externally applied pressureSpeaker: Christian Scheuerlein (CERN)
-
12
Sub-modeling approach of plastically deformed geometries of Nb3Sn cables and strands for the 11T dipole magnetSpeaker: Michael Daly
-
13
Effect of transverse stress applied during reaction heat treatment on the stiffness of Nb3Sn Rutherford cable stacksSpeaker: Felix Josef Wolf (CERN)
-
7
-
Wrap-up & discussion - Chairs Sessions 1 and 2 Salle LOUXOR, 3rd floor (Espace St Martin)
Salle LOUXOR, 3rd floor
Espace St Martin
Convener: Chairs: session 1 & 2 -
Organisational address Salle LOUXOR, 3rd floor (Espace St Martin)
Salle LOUXOR, 3rd floor
Espace St Martin
-
Dinner - LE TRAIN BLEU 1er étage, Gare de Lyon, Place Louis Armand, 75012 PARIS
1er étage, Gare de Lyon, Place Louis Armand, 75012 PARIS
-
-
-
Doors open: Welcome coffee Salle KARNAK, ground floor, Espace St Martin
Salle KARNAK, ground floor, Espace St Martin
-
Jc dependence to stress / strain state Salle KARNAK, ground floor (Espace St Martin)
Salle KARNAK, ground floor
Espace St Martin
Conveners: Bernardo Bordini (CERN), Helene Felice (Université Paris-Saclay (FR))-
14
Jc dependence to stress / strain state - Session Introduction Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Chairs: Bernardo Bordini and Hélène Felice -
15
EXTERNAL POINT OF VIEW: Strain effects and performance limitations in Nb3Sn Cable-in-Conduit Conductors Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Luigi Muzzi (ENEA) -
16
The history of Transverse Pressure Tests of Nb3Sn Rutherford Cables Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Arno Godeke (Lawrence Berkeley National Laboratory) -
17
Electromechanical characterization of Nb3Sn conductors at University of Geneva Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Jose Ferradas Troitino (Universite de Geneve (CH)) -
10:20
Pause - café Galerie de Peintures, annexe salle KARNAK, ground floor (Espace St Martin)
Galerie de Peintures, annexe salle KARNAK, ground floor
Espace St Martin
-
18
Irreversible Ic degradation of Hi-Lumi Nb3Sn Rutherford cables induced by transverse loading at room temperature Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Jerome Fleiter (CERN) -
19
Critical Current Measurements of Nb3Sn Rutherford Cables Under Transverse Stress Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Gianluca De Marzi (INFN e Laboratori Nazionali di Frascati (IT)) -
20
Transverse pressure sensitivity of state-of-the-art Nb3Sn Rutherford cables Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Dr Marc Dhallé (University of Twente) -
12:50
Pause - déjeuner Paris, France
Paris, France
-
21
Stress concentration and effects in Nb3Sn accelerator magnets Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: emanuela barzi (Fermilab) -
22
Short Sample Limits for CCT Coils Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Ian PONG (LBNL) -
15:30
Pause - café Galerie de Peintures, annexe salle KARNAK, ground floor (Espace St Martin)
Galerie de Peintures, annexe salle KARNAK, ground floor
Espace St Martin
-
23
A 3D Finite Element Model of the Reversible Critical Current Reduction due to transverse load in Nb3Sn wires Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Alessandro Cattabiani (CERN) -
24
Computation of the Reversible Critical Current Degradation in Nb3Sn Rutherford Cables Salle KARNAK, ground floor
Salle KARNAK, ground floor
Espace St Martin
Speaker: Giorgio Vallone (Lawrence Berkeley National Lab. (US))
-
14
-
Wrap-up & discussion - Chairs Session 3 Salle KARNAK, ground floor (Espace St Martin)
Salle KARNAK, ground floor
Espace St Martin
Convener: Chairs: Session 3 -
Conclusions Salle KARNAK, ground floor (Espace St Martin)
Salle KARNAK, ground floor
Espace St Martin
-