3rd I.FAST Annual Meeting
→
Europe/Zurich
Cité Internationale Universitaire de Paris (CIUP)
Fondation Biermans-Lapôtre
9A Boulevard Jourdan, 75014 PARIS
Maurizio Vretenar
(CERN)
Description
The I.FAST (Innovation Fostering in Accelerator Science and Technology) Innovation Pilot project for the Particle Accelerator community will hold its 3rd Annual Meeting in Paris, France, from Wednesday 17 to Friday 19 April 2024 (plenary sessions).
Activities and recent results of the different Work Packages will be presented. Special sessions will be devoted to collaboration with industry, sustainability, and diversity in science and technology.
Parallel WP meetings and an industry Workshop on cryogenic technology will precede the event, on 16-17 April.
I.FAST Secretariat
Participants
147
View full list
-
-
Parallel Meeting: WP9 (Salle cinéma)Convener: Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory)
-
1
OpeningSpeaker: Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory)
-
2
Task 9.1: Coordination and Strategy, thin film SRF implementation for ESPPSpeakers: Dr Claire Antoine (CEA), Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory)
-
3
Introduction to iSAS WP3Speaker: Cristian Pira
-
4
Task 9.3: Progress at INFN on targets, deposition and characterisationSpeakers: Cristian Pira, Davide Ford, Dorothea Fonnesu (INFN)
-
5
Task 9.3: Progress at UKRI on deposition and characterisationSpeakers: Mr Christopher Benjamin, Dr Reza Valizadeh (STFC Daresbury Laboratory)
-
6
Task: 9.3:Progress at USISpeaker: Aleksandr Zubtsovskii (Institute of Materials Engineering, University of Siegen)
-
7
Task 9.3: Results from IEESpeaker: Eugen Seiler (IEE Slovak Academy of Sciences)
-
8
Task 9.3: Magnetic field penetration resultsSpeaker: Liam Smith
-
9
Task 9.3: Spilt cavity progressSpeakers: Graeme Campbell Burt (Lancaster University (GB)), Nathan Leicester
-
10
Task 9.2: 1.3 GHz cavity productionSpeaker: Cristian Pira
-
11
Task 9.2: 1.3 GHz cavity deposition facility at INFNSpeaker: Alessandro Salmaso
-
12
Task 9.2: 1.3 GHz cavity deposition facility at UKRISpeakers: Dr Reza Valizadeh (STFC Daresbury Laboratory), Stephane Simon
-
13
Task 9.2: Cavity testing at INFNSpeaker: Cristian Pira
-
14
Task 9.2: Development of new high power SRF facility at UKRISpeaker: Taaj Sian
-
15
Task 9.2: Development of new low power SRF facility at UKRI/CISpeaker: Daniel Seal
-
16
Discussion
-
1
-
10:30
Coffee Break (in the Galerie)
-
13:00
Lunch Break (Free choice in one of the CIUP restaurants or outside)
-
Industry Worskhop on Cryogenics (Salle des Fêtes)Convener: Mauro Morandin (Universita e INFN, Padova (IT))
-
Parallel Meeting: Task5.2 (Salon)Convener: Frank Zimmermann (CERN)
-
Parallel Meeting: WP10 (Bibliothèque)Conveners: Andris Ratkus (Riga Technical University (LV)), Prof. Toms Torims (Riga Technical University (LV))
-
Parallel Meeting: WP9 (Salle cinéma)Convener: Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory)
-
17
Task 9.4: Progress with ALD deposition at CEASpeaker: Dr Thomas Proslier
-
18
Task 9.5:: Laser treatment at RTUSpeaker: Arturs Medvids
-
19
Task 9.5:: Progress with FLA at HZDRSpeakers: Shengqiang Zhou, Slawomir Prucnal
-
20
Discussion
-
21
Task 9.6: QPR polishing at INFNSpeaker: Eduard Chyhyrynets
-
22
Task 9.6: QPR polishing at CNRSSpeaker: David Longuevergne (CNRS/IN2P3/IJCLab)
-
23
Task 9.6: QPR progress at HZBSpeaker: Oliver Kugeler
-
24
QPR progress at at University of HamburgSpeakers: Marc Wenskat, Marc Wenskat
-
25
QPR progress at CERNSpeaker: Stewart Leith (CERN)
-
26
Task 9.6: RF surface resistance measurements on planar samplesSpeaker: Daniel Seal
-
27
Discussion
-
28
Final remarks, future meetings, closingSpeakers: Dr Claire Antoine (CEA), Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory)
-
17
-
Parallel Meeting: WP11 (Salon): Sustainable Accelerators
Sustainable Particle Accelerators
Convener: Mike Seidel-
29
Report from CERN
IFAST Tasks and developments at CERN if applicable
Speaker: Nuria Catalan Lasheras (CERN) -
30
Report from DESY
IFAST Tasks or Developments @DESY
Speaker: Denise Voelker -
31
Report from GSI (remote)
IFAST Tasks or Developments @GSI
Speakers: Jan Lindenberg (G), Peter-Jurgen Spiller -
32
Report from STFC
IFAST Tasks or Developments @STFC
Speaker: Mr Ben Shepherd -
33
Report fron PSI
ESSRI preparation, News from PSI
Speaker: Mike Seidel -
34
Discussion on compilation of deliverable report
-
29
-
16:15
Coffee Break (in the Galerie)
-
IAB meeting (Bibliothèque)Convener: Mauro Morandin (Universita e INFN, Padova (IT))
-
-
-
Industry Worskhop on Cryogenics (Salle des Fêtes)Convener: Mauro Morandin (Universita e INFN, Padova (IT))
-
EURONNAC (Salle cinéma)Convener: Massimo Ferrario
-
Parallel Meeting: Task10.5 (Bibliothèque)Convener: Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory)
-
35
OpenigSpeaker: Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory)
-
36
Sample deposition and characterisation at UKRISpeakers: Eleni Marshall (STFC Daresbury), Dr Reza Valizadeh (STFC Daresbury Laboratory)
-
37
Sample preparation, deposition and characterisation at DESYSpeakers: Nils Plambeck, Ruta Sirvinskaite
-
38
Sample testing at SoleilSpeakers: Christian HERBEAUX, Dr Nicolas Bechù (Soleil), Dr Vincent Leroux (Soleil)
-
39
Sample testing at DLSSpeakers: Chris Burrows, Matthew Cox
-
40
Discussion
-
41
Planning for the next year
-
42
Final remarks, future meetings, closingSpeaker: Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory)
-
35
-
Visit to CEA / IJCLab Saclay
-
10:30
Coffee Break (in the Galerie)
-
13:00
Lunch Break (Free choice in one of the CIUP restaurants or outside)
-
Plenary Session 1 - Introduction, Communication, Training, Applications: (Salle des Fêtes)Convener: Toms Torims (Riga Technical University)
-
43
Introduction by the Project CoordinatorSpeaker: Maurizio Vretenar (CERN)
-
44
I.FAST communication and outreach (10' + 5' questions)Speaker: Mr Antoine Le Gall (CERN)
-
45
Experience with the IFAST Challenge Based Innovation (10' + 5' questions)Speaker: Dr Nicolas Delerue (CNRS & Université Paris-Saclay)
-
46
A feedback from the I.FAST Industry Training (10' + 5' questions)Speaker: Dr Luca Garolfi (SEEIIST Association (CH))
-
47
Update on IFAST internal communication and disseminationSpeaker: Yiota Foka (GSI - Helmholtzzentrum fur Schwerionenforschung GmbH (DE))
- 48
-
43
-
15:35
Coffee Break
-
Plenary Session 2 - Industry: (Salle des Fêtes)Convener: Dr Angeles Faus-Golfe (IJClab IN2P3 CNRS-Université Paris-Saclay (FR))
-
49
I.FAST industry related activitiesSpeaker: Mauro Morandin (Universita e INFN, Padova (IT))
-
50
Industrial technologies for the production of advanced ceramics and composites for Big Science facilitiesSpeaker: Sergio Rivera
-
51
Eliminating risks by stern integration of control systemsSpeaker: Rok Hrovatin (COSYLAB)
-
52
From science requirements to applications in industrySpeaker: Michael Pekeler (RI Research Instruments GmbH)
-
53
Lessons learned and perspectives for a more effective exploitation of the industrial potential in Accelerator Magnet projectsSpeaker: Wolfgang Walter (Bilfinger Noell GmbH)
-
54
The win-win benefit of industry-academia collaborations in new solution and product developmentSpeaker: Etienne TOUZAIN
- 55
-
56
Towards energy efficient accelerator magnets: Development of commercial large-scale production of filamentary HTS tapesSpeaker: Anders C. Wulff (Subra)
-
57
AIPF: the Accelerator-Industry Permanent ForumSpeaker: Dr Raffaella Geometrante
-
49
-
18:30
Welcome Cocktail
-
-
-
Plenary Session 3 - New concepts (Salle des Fêtes)Convener: Mike Seidel
-
58
Structure and progress of the International Muon Collider Collaboration (15' + 5' questions)Speaker: Nadia Pastrone (Universita e INFN Torino (IT))
-
59
Progress at the accelerator frontier (15' + 5' questions)Speaker: Frank Zimmermann (CERN)
-
60
Novel particle accelerators, EuroNNAc and EuPRAXIA (15' + 5' questions)Speaker: Massimo Ferrario
-
61
Lasers for Plasma Accelerators, targets and local spot stabilisation (10' + 5' questions)Speaker: Dr Leonida Antonio (Leo) Gizzi (CNR, Istituto Nazionale di Ottica, Pisa, Italy)
-
62
Slow extraction improvement (10' + 5' questions)Speaker: Peter Forck
-
58
-
10:25
Coffee Break
-
Plenary Session 4 - Accelerator Technologies (Salle des Fêtes)Convener: Jose Manuel Perez-Morales (CIEMAT, Centro de Investigaciones Energeticas Medioambientales y Tecnologicas)
-
63
Innovative Superconducting Magnets (15' + 5' questions)Speaker: Ernesto De Matteis (INFN Milano - LASA)
-
64
Development of ReBCO HTS nuclotron cableSpeaker: Dr Tiemo Winkler
-
65
Innovative Superconducting Thin Film Coated Cavities (incl. PSD) (25' + 5' questions)Speakers: Cristian Pira, Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory), Dr Reza Valizadeh (STFC Daresbury Laboratory)
-
66
Results with Additive Manufacturing of accelerator componentsSpeaker: Maurizio Vedani (Politecnico di Milano, Department of Mechanical Engineering)
-
67
AM manufacturing of Superconducting cavitiesSpeakers: Adriano Pepato (Universita e INFN, Padova (IT)), Pietro Rebesan
-
68
Additive manufacturing for accelerators - outlook and perspectivesSpeaker: Prof. Toms Torims (Riga Technical University (LV))
-
69
Beam windows and materials (10' + 5' questions)Speaker: Federico Carra (CERN)
-
70
High-efficiency high-power Gallium Nitride amplifier modules (10' + 5' questions)Speakers: Alireza Kasaei (Uppsala University), Dr Dragos Dancila
-
71
High Efficiency Klystron Prototype (10' + 5' questions)Speaker: Nuria Catalan Lasheras (CERN)
-
63
-
13:00
Lunch Break (Buffet lunch organised at Fondation Biermans-Lapôtre)
-
Plenary Session 5 - Light Sources and I.FAST Highlights (Salle des Fêtes)Convener: Yiota Foka (GSI - Helmholtzzentrum fur Schwerionenforschung GmbH (DE))
-
72
Overview of Ultra-low Emittance RingsSpeaker: Riccardo Bartolini (DESY)
-
73
Progress with the Longitudinally Variable Dipole (10' + 5' questions)Speaker: Yannis Papaphilippou (CERN)
-
74
C-band Very High Gradient Guns (10' + 5' questions)Speaker: David Alesini
-
75
Status of CompactLight Prototype Structures (10' + 5' questions)Speaker: Gerardo D'Auria (Elettra Trieste)
-
76
Refractory materials with applications in particle accelerators (10' + 5' questions)Speaker: Sergio Rivera
-
77
Energy saving SC magnets in accelerators and beam lines (10' + 5' questions)Speaker: Samuele Mariotto
-
78
ML/AI marvels for accelerator domain (10' + 5' questions)Speaker: Karlis Berkolds
-
79
The ELBE accelerator and its use to characterize Nb films (15' + 5' questions)Speaker: Andreas Wagner (Helmholtz-Zentrum Dresden-Rossendorf)
-
72
-
16:00
Coffee Break
-
20:00
Banquet Dinner (Restaurant du Parc Montsouris)
-
-
-
Plenary Session 7 - Innovation Fund, Diversity (Salle des Fêtes)Convener: Dr Sylvie Leray
-
80
Task 10.5: Nonevaporable getter (NEG) coating under synchrotron radiation (SR)Speaker: Dr Oleg Malyshev (UKRI/STFC Daresbury Laboratory)
-
81
Overview of the IFAST Innovation Fund Projects (programme and status)(25' + 5' questions)Speaker: Dr Luca Garolfi (SEEIIST Association (CH))
-
82
Presentation of IIF projects: KAIO Accelerator (10' + 5' questions)Speaker: Rodrigo Lopez-Martens
-
83
Presentation of IIF projects: AM applications of refractory metals for ION Source cavities (10' + 5' questions)Speaker: Pietro Rebesan
-
84
A new tunable PMQ designSpeaker: Dr Daniel Barna (Wigner Research Centre for Physics)
-
85
Diversity session: Diversity and Innovation - Panel discussionSpeakers: Carsten Peter Welsch (Cockcroft Institute / University of Liverpool), Maurizio Vretenar (CERN), Michiko Minty, Dr Raffaella Geometrante
-
80
-
11:10
Coffee Break
-
Plenary Session 8 - EU Projects, Conclusions (Salle des Fêtes)Convener: Maurizio Vretenar (CERN)
-
86
TIARA and future Horizon projects for accelerators (10' + 5' questions)Speaker: Jose Manuel Perez-Morales (CIEMAT, Centro de Investigaciones Energeticas Medioambientales y Tecnologicas)
-
87
From AMICI to a new framework for support of Technology Infrastructure (10' + 5' questions)Speaker: Dr Sylvie Leray
- 88
-
89
SAC report and I.FAST closing remarksSpeaker: Michiko Minty
-
86
-
13:00
Lunch Break (Free choice in one of the CIUP restaurants or outside)
-
Governing Board/Steering Committee
-