CEC-ICMC 2019 - Abstracts, Timetable and Presentations

from Sunday 21 July 2019 (08:00) to Thursday 25 July 2019 (13:00)
Connecticut Convention Center, Level 6

        : Sessions
    /     : Talks
        : Breaks
21 Jul 2019
22 Jul 2019
23 Jul 2019
24 Jul 2019
25 Jul 2019
AM
08:00 --- Cryogenic Society of America (CSA) Short Courses ---
08:00 --- ICMC Short Course ---
07:45 --- Registration Open (7:00 AM - 5:00 PM) ---
07:50 --- Cryo Expo Open - 9:00 AM - 4:00 PM ---
07:55 --- Opening & CEC Awards (7:55 AM - 8:15 AM) ---
08:15
Plenary: Andy Marsh | Plug Power, Inc. - Jacob Leachman (Washington State University) Jennifer Marquardt (Ball) (until 09:00) (Marriott Ballroom)
08:15 C1PL01: The Growing Hydrogen Economy and the Need for Liquid Hydrogen - Andy Marsh (Plug Power Inc.)  
09:00 --- Morning Break (during Poster Session) ---
09:00
C1Po1A - Cryogenic Rotating Machinery - Weibo Chen (Jet Propulsion Laboratory) Philipp Arnold (European Spallation Source ESS AB) (until 11:00)
09:00 C1Po1A-02 [23]: A novel hydrogen turbo-expender with active magnetic bearings and an eddy current brake - Prof. Jihao Wu (1.Technical Institute of Physics and Chemistry Chinese Academy of Sciences. 2.University of Chinese Academy of Sciences)  
09:00 C1Po1A-03 [22]: Effect of Leading-edge Geometry and Thickness on The Performance of Miniature Cryogenic Expansion Turbine - Changlei Ke  
09:00 C1Po1A-04 [21]: Design and Experiment Study of Cryogenic Helium Turbine Expander - Dr Kongrong Li (Technical Institute of Physics and Chemistry)  
09:00 C1Po1A-07 [19]: Study on the Load Capacity of New Type Gas-lubricated Spiral-Groove Thrust Bearing - Dr Xiaohua Zhang  
09:00 C1Po1A-08 [18]: Test of a submersible liquid helium transfer pump - Steffen Kloeppel (TU Dresden)  
09:00 C1Po1A-09 [17]: Development of a cryo-rotary joint for thermosyphon cooling system up to 1000 rpm - Mr Kota Yamaguchi (Tokyo University of Marine Science and Technology)  
09:00 C1Po1A-10 [16] (Jiaho Wu) - Presentation Withdrawn  
09:00
C1Po1B - Aerospace Applications - Adam Swanger (NASA Kennedy Space Center) Jacob Leachman (Washington State University) (until 11:00)
09:00 C1Po1B-01 [14]: Robotic Refueling Mission 3—An Overview - Dr Susan Breon (NASA Goddard Space Flight Center)  
09:00 C1Po1B-02 [13]: Integrated Refrigeration and Storage of LNG for Compositional Stability - Ms Laura Rose (NASA Kennedy Space Center)  
09:00 C1Po1B-03 [12]: Investigation on thermodynamic characteristics of cryogenic propellant slosh under varied gravity conditions - Mr Lei Wang  
09:00 C1Po1B-05 [10]: Estimation of heat dissipation on a rotating rotor over superconducting magnet bearing - Dr Teruhito Iida (ispace, inc.)  
09:00 C1Po1B-07 [09]: Numerical Analysis of Fluid Transients Induced by Valve Operation in Cryogenic Feed lines - Arpit Mishra (Indian Institute of Technology (IIT), Kharagpur, India)  
09:00 C1Po1B-08 [08]: Experimental study on effect of non-uniform heat flux on self-pressurization and thermal stratification in a ground cryogenic tank - Mr X.J Qin (Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University)  
09:00 C1Po1B-09 [07]: CFD Analysis of Vortex Tube with Two-phase Air at Cryogenic Temperature - Prof. Tanmay Dutta (IIT (ISM) Dhanbad)  
09:00 C1Po1B-10 [06]: A Model Based Systems Engineering Approach to Achieve Zero Boil-off on A Nuclear Thermal Propulsion Spacecraft - Mr Justin Conner (The University of Alabama in Huntsville)  
09:00
C1Po1C - Stirling and VM Coolers - Ian McKinley (Jet Propulsion Laboratory) Jennifer Marquardt (Ball) (until 11:00)
09:00 C1Po1C-01 [05]: Development of a kW-class Stirling cryocooler for liquefaction of natural gas - Dr Jiho Park (Korea Institute of Machinery and Materials)  
09:00 C1Po1C-02 [04]: Wide temperature range test of high capacity Stirling cryocooler - Dr Junseok Ko (Korea Institute of Machinery & Materials)  
09:00 C1Po1C-03 [03]: The Study on High Efficiency and Low Vibration Flexure Bearing Stirling Cryocooler - Mr Chuanlin Yin  
09:00 C1Po1C-04 [02]: Research progress of the Vuilleumier-type cryocooler working at liquid helium temperature and its further application prospect - Dr Liubiao Chen (CAS Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Beijing, 100049, China)  
09:00 C1Po1C-05 [01]: Numerical investigation on geometry's influence in double stage Vuilleumier type pulse tube cryocooler (VM-DPTC) - Dr Liubiao Chen (CAS Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Beijing, 100049, China)  
09:00
C1Po1D - Cryogen Technology - Jonathan Demko (LeTourneau University) Peter Bradley (NIST) (until 11:00)
09:00 C1Po1D-01 [25]: Cryogenic Flux Capacitor for Advanced Molecular and Energy Storage Applications - Adam Swanger (NASA Kennedy Space Center)  
09:00 C1Po1D-02 [26]: Distillation Based CO2 Removal from Natural Gas for Small and Medium Sized Plant - Veera Manek (Georgia Institute of Technology)  
09:00 C1Po1D-03 [27]: Oxygen Separation in a Vortex Tube with Applied Magnetic Field - Ms Jordan Raymond (Washington State University)  
09:00 C1Po1D-05 [28]: Design of dewar supports through topology optimization - B Nitin (Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur)  
09:00 C1Po1D-06 [29]: Numerical study on cryogenic carbon capture by desublimation - Mr Amit Rajkonwar (Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur) Prof. Pavitra Sandilya (Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur)  
09:00
C1Po1E - Large Scale Systems I - Benjamin Hansen (Fermilab) Grzegorz Tatkowski (Fermilab) (until 11:00)
09:00 C1Po1E-01 [30]: Helium management of ESS cryoplants with common safety relief header and recovery system - Mr Philipp Arnold (European Spallation Source ERIC)  
09:00 C1Po1E-04 [31]: Cryogenic System for the 2nd KSTAR Neutral Beam Injector - Dr Young-Ju Lee (National Fusion Research Institute)  
09:00 C1Po1E-05 [32]: Conceptual design of the CFETR cryogenic system - Dr XiaoGang Liu (ASIPP)  
09:00 C1Po1E-06 [33]: Cryogenic System Design for CiADS Accelerator - Xiaofei Niu (CAS) xiaohong Guo (CAS)  
09:00 C1Po1E-08 [34]: Thermodynamic and cost-effectiveness analyses of chosen cooling loops for local production of saturated superfluid helium in large cryogenic systems - Dr Slawomir Pietrowicz (Wroclaw University of Technology) Jaroslaw Fydrych (European Spallation Source ESS AB)  
09:00
C1Po1F - Superconducting Magnet Systems I -Mr Zijia Zhao (Tufts University) Sastry Pamidi (CAPS/FSU) (until 11:00)
09:00 C1Po1F-01 [35]: Thermal Analysis of a Superconducting Undulator Cryostat for the APS Upgrade - Dr Yuko Shiroyanagi (Argonne National Laboratory)  
09:00 C1Po1F-02 [36]: A New Superconducting Undulator Cryostat for the APS Upgrade - Mr Ethan Anliker (ANL)  
09:00 C1Po1F-03 [37]: The design and analysis of a superconducting magnet system for high field MRI - Prof. Chao Zhou (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, China )  
09:00 C1Po1F-04 [38]: Design and fabrication of the conduction cooling unit for the YBCO magnet of 1 MW superconducting induction heater - Dr Tao Ma (Beijing Jiaotong University)  
09:00 C1Po1F-05 [39]: Conceptual cooling design for 14T MRI superconducting magnet system - Qiang Wang Hao  
09:00 C1Po1F-07 [40]: The Effect of the Material in a well-coupled shorted Secondary on Quench Protection of an Insulated ReBCO Tape Solenoid Magnet that is Quench Protected by discharging the Magnet across a Constant Voltage Resistor - Dr Michael Green (Lawrence Berkeley Laboratory)  
09:00 C1Po1F-09 [42]: The Thermo-Electric Design of the Electric Current Feeders of the HL-LHC Triplet Magnets - Mr Florian Pasdeloup (CERN)  
09:00 C1Po1F-10 [43]: Thermal engineering of optical mirrors for use at cryogenic temperature inside a LHC cryostat - Florian Pasdeloup (CERN)  
09:30
M1Or1A - Focus Series A: REBCO Coated Conductors I - Venkat Selvamanickam (University of Houston) Markus Bauer (THEVA Dünnschichttechnik GmbH) (until 11:00)
09:30 M1Or1A-01 [Invited]: Recent progress in SuNAM’s coated conductor development - Dr Seung-Hyun Moon (SuNAM Co., Ltd.)  
10:00 M1Or1A-02 [Invited]: Development of BMO Doped REBCO Coated Conductors with Homogenous In-field Properties by Productive Hot-Wall PLD Process - Dr Yasuhiro Iijima (Fujikura Ltd.)  
10:30 M1Or1A-03 [Invited]: Present Directions for 2G HTS Wire Development at SuperOx - Dr Alexey Mankevich (SuperOx) Dr Alexander Molodyk (SuperOx)  
11:00
C1Or1A - Aerospace Cryocoolers I - Franklin Miller (University of Wisconsin - Madison) Peter Shirron (NASA/GSFC) (until 12:30)
11:00 C1Or1A-01: Performance Characteristics Comparison of Major Types of Mechanical Cryocoolers for Aerospace Applications - Weibo Chen (Jet Propulsion Lab)  
11:15 C1Or1A-02: Status of Lockheed Martin Microcryocooler Programs - Jeffrey Olson (Lockheed Martin Space)  
11:30 C1Or1A-03: Characterization Testing of Lockheed Martin Micro1-2 Cryocoolers for the Mapping Imaging Spectrometer for Europa - Ian McKinley (Jet Propulsion Laboratory)  
11:45 C1Or1A-04: Northrop Grumman Next Generation MiniCooler Plus Performance - Ladan Amouzegar Ashtiani  
12:00 C1Or1A-05: Thermal and Exported Vibration Characterization of Ricor K508N Cryocooler - Mr Mason Mok (Jet Propulsion Laboratory)  
12:15 C1Or1A-06: Micro-Sized Cryocooler Controllers for Space - Kerry Frohling (Iris Technology)  
11:00
C1Or1B - Large Scale Systems II - Michael White (Fermilab) Shrikant Pattalwar (STFC Daresbury Laboratory, UK) (until 12:15)
11:00 C1Or1B-01: The ESS Test and Instruments Cryoplant – First test results and operation experiences - Mr Philipp Arnold (European Spallation Source ERIC)  
11:15 C1Or1B-02: Cryogenic operational experience from the LHC physics run2 (2015-2018 inclusive) - Laurent Delprat (CERN)  
11:30 C1Or1B-03: Cryogenic system design for the electron-ion collider at Brookhaven National Laboratory - Dhananjay Ravikumar (Brookhaven National Laboratory)  
11:45 C1Or1B-04: Application of Sub-cooled Superfluid Helium for Cavity Cooling at linac-based Free Electron Lasers, Energy Recovery and Proton Linacs - Dr Sergiy Putselyk (FHR)  
12:00 C1Or1B-06: Cryogenic management of the LHC Run 2 dynamic heat loads - Benjamin Bradu (CERN)  
11:00
C1Or1C - Non-Aerospace Cryocooler Modelling and Studies - Wei Dai (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) Ryan Taylor (Ball Aerospace and Technologies) (until 12:00)
11:00 C1Or1C-01: CFD study of the 2D gas piston in pulse tube cryocoolers - Ms Zhimin Guo (School of Mechanical Engineering, Tongji University)  
11:15 C1Or1C-02: Numerical Modeling and Loss Analysis of Pneumatically-Driven Gifford-McMahon Cryocooler - Dr Tian Lei (Sumitomo (SHI) Cryogenics of America, Inc.)  
11:30 C1Or1C-03: A Second Law Study of the Regenerators in Cryocoolers based on Pore-level Analysis of Entropy Generation - Tao Fang (Georgia Institute of Technology)  
11:45 C1Or1C-04: An experimental investigation on finned heat exchangers with cryogenic helium oscillating flow - Mr Jiale Huang (Zhejiang University)  
11:00
M1Or2A - A15 Conductors - David Larbalestier (National High Magnetic Field Laboratory) Herman Ten Kate (CERN) (until 12:15)
11:00 M1Or2A-01: Pinning force enhancement in Nb3Sn wires via nano-particles doping - Mr Mattia Ortino (TU Wien)  
11:15 M1Or2A-02: Flux pinning mechanism in Nb3Sn conductors with artificial pinning centers - Xingchen Xu (Fermi National Accelerator Lab)  
11:30 M1Or2A-03: Tube type strands with and without artificial pinning centers in Hyper Tech - Xuan Peng (Hyper Tech Research Inc.)  
11:45 M1Or2A-04: Effect of Grain Size, Flux Pinning, and High Critical Field in Ternary APC Nb3Sn Wires - Jacob Rochester (The Ohio State University)  
12:00 M1Or2A-05: Workability and recrystallization behavior of Nb-Ta, and Nb-Ta-Hf alloys - Benjamin Walker (Department of Mechanical Engineering)  
11:00
M1Or2B - Focus Series A: REBCO Coated Conductors II - Vyacheslav Solovyov (Brookhaven Technology Group) Carlo Ferdeghini (CNR-SPIN) (until 12:30)
11:00 M1Or2B-01 [Invited]: Status of second-generation HTS wire production at THEVA - Markus Bauer (THEVA Dünnschichttechnik GmbH)  
11:30 M1Or2B-02 [Invited]: Present status of RE-123 superconducting wire development at Shanghai Superconductor Technology - Prof. Yutaka Yamada (Shanghai Superconductor Technology Co. Ltd.,)  
12:00 M1Or2B-03 [Invited]: Enhancement of Measurement Speed over 100 m/h in Reel-to-Reel Scanning Hall Probe Microscopy Using a Multi-Channel Array - Takanobu Kiss (Kyushu University)  
11:00
M1Or2C - Metals & Composites - Dick Reed (Cryogenic Materials, Inc.) Robert Walsh (Florida State University) (until 12:30)
11:00 M1Or2C-01: Impact of heat treatment on fracture behavior of additive manufactured 316L stainless steel at cryogenic temperatures - Dr Klaus-Peter Weiss (KIT, Institute for Technical Physics)  
11:15 M1Or2C-02: The Low Temperature Mechanical Properties of a Nitronic 40 Forging - Robert Walsh (Florida State University)  
11:30 M1Or2C-03: Tensile Properties and Fracture Toughness of New Stainless-Steel Plate at Cryogenic Temperatures - Arata Nishimura (National Institute for Fusion Science)  
11:45 M1Or2C-05: Mechanical Properties of AA2219-T62 Friction Stir Welding Joints at Cryogenic Temperature - Dr Huang Chuanjun (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)  
12:00 M1Or2C-06: Mechanical tensile testing of Hiperco 50A at cryogenic temperature - Mr Bryan James (NASA/GSFC)  
12:15 M1Or2C-07: Tensile properties of the HEA CoCrFeMnNi at 4 Kelvin - Mr Peter E. Bradley (National Institute of Standards and Technology, Boulder, Colorado, Applied Chemicals and Materials Division, Material Measurement Laboratory)  
07:45 --- Registration Open (7:00 AM - 5:30 PM) ---
07:50 --- Cryo Expo Open - 9:00 AM - 3:30 PM ---
07:55 --- ICMC Awards (7:55 AM - 8:15 AM) ---
08:15
Plenary: Mykhaylo Filipenko | Siemens AG - Timothy Haugan (U.S. Air Force Research Laboratory) Sonja Schlachter (Karlsruhe Institute of Technology, ITEP) (until 09:00)
08:15 M2PL-01: Electric and Hybrid-Electric Aircraft: A Pragmatic View - Dr Mykhaylo Filipenko (Siemens AG)  
09:00 --- Morning Break (during Poster Session) ---
09:00
C2Po1A - Applications: Safety and Instrumentation II - Robert Duckworth (Oak Ridge National Laboratory) Scott Courts (Lake Shore Cryotronics, Inc.) (until 11:00)
09:00 C2Po1A-01 [24]: Effect of mass flow rate on gas propagation after vacuum break in a liquid helium cooled tube. - Nathaniel Garceau (National Magnetic Field Labortory - FSU)  
09:00 C2Po1A-02 [23]: Faliure modes, effects and criticality analysis of a 3kW@4.5K helium refrigerator - Ms Yiwen Zong (Heifei insititues of Physical Science,Chinese Academy of Sciences)  
09:00 C2Po1A-03 [22]: Experimental Study on Response of Split Stirling cooler to Mechanical Conditions under Non-rigid Contact Conditions - Zheng Wang (Institute of Cryogenics and Electronics)  
09:00 C2Po1A-04 [21]: Analysis of freezing risk during LNG evaporation process - Mr Arkadiusz Brenk (Wroclaw University of Science and Technology) Ziemowit Malecha (Wroclaw University of Science and Technology)  
09:00 C2Po1A-06 [20]: Design optimization and Calibration of a void fraction measurement capacitance sensor for LN2 flow - Mr Nagendra H.N. (Indian Institute of Science)  
09:00 C2Po1A-07 [19]: The FlexCryo : a new flexible solution for temperature control and temperature measurement down to 50 mK - Anthony Attard (CEA)  
09:00
C2Po1B - Applications: Visualization and Instrumentation - Al Zeller (NHMFL, FSU) Ziemowit Malecha (Wroclaw University of Technology) (until 11:00)
09:00 C2Po1B-04 [17]: Thermal Acoustic Oscillations: Short Review and Countermeasures - Dr Sergiy Putselyk (FHR)  
09:00 C2Po1B-05 [16]: Non-standard Valves for Helium Cryogenics: from Specification till Installation and Commissioning - Dr Sergiy Putselyk (FHR)  
09:00 C2Po1B-06 [15]: Crystal growth of CO2 at low temperatures: experimental observation and empirical approach - Ms Yaning Wang (Zhejiang University)  
09:00 C2Po1B-07 [14]: Development of a cryogenic device for peeling fruits - Prof. Junjie Wang (Technical Institute of Physics and Chemistry, CAS)  
09:00
C2Po1C - Aerospace Cryocooler II - Sangkwon Jeong (KAIST) Susan Breon (NASA) (until 11:00)
09:00 C2Po1C-01 [13]: Research on the flow resistance of the J-T orifice of space 4K hybrid J-T cooler - Prof. Houlei Chen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)  
09:00 C2Po1C-02 [12]: Impact of the cold regenerator meshes geometry on low temperature PT performances - Dr Diane Dherbecourt (CEA Grenoble)  
09:00 C2Po1C-03 [11]: Sensitivity analysis on miniaturize pulse tube boundary layer losses - Ali Ghavami (Georgia Tech)  
09:00 C2Po1C-05 [10]: Development of the single-stage regenerative cryocooler for space applications in SITP, CAS - Dr Shaoshuai Liu (Shanghai Institute of Technical Physics, Chinese Academy of Science)  
09:00
C2Po1D - Stirling-Type Pulse Tube Coolers - Alphons de Waele (Oswald Elektromotoren) Limin Qiu (Zhejiang University) (until 11:00)
09:00 C2Po1D-01 [09]: Development of Stirling type pulse tube cryocooler - Dr Yong-Ju Hong (Korea Institute of Machinery & Materials)  
09:00 C2Po1D-02 [08]: Experimental study on a 20W/80K high frequency pulse tube cryocooler - Prof. Junjie Wang (Technical Institute of Physics and Chemistry, CAS) Liubiao Chen (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS)  
09:00 C2Po1D-04 [07]: Design of a two-stage gas-coupled high-frequency multi-bypass pulse tube cryocooler working around 4 K - Prof. Junjie Wang (Technical Institute of Physics and Chemistry, CAS) Liubiao Chen (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS)  
09:00
C2Po1E - Medical and Biological Applications - Marcel ter Brake (University of Twente, The Netherlands) Kathleen Amm (Brookhaven National Laboratory) (until 11:00)
09:00 C2Po1E-01 [25]: Oxygen Storage Module for Closed-Circuit Respirators using Physisorption Technology - Adam Swanger (NASA Kennedy Space Center)  
09:00 C2Po1E-02 [26]: Development of Zero Boil-off Cooling Systems for Superconducting Self-shielded Meg - Dr Katsuhiro Narasaki (Sumitomo Heavy Industries, Ltd)  
09:00 C2Po1E-03 [27]: A 3T MRI magnet based on MgB2 strand for cryogen free operation – magnetic, mechanical and thermal FEM modeling - Milan Majoros (The Ohio State University)  
09:00 C2Po1E-04 [28]: The Modeling and Design of an MRI-Compatible Heat Exchanger for a Cryosurgical Probe - Logan Kossel (University of Wisconsin - Madison)  
09:00 C2Po1E-05 [29]: Experimental measurement on the thermal conductivity and specific heat of sea-fish below -40℃ - Dr Liubiao Chen (Technical Institute of Physics and Chemistry, CAS)  
09:00 C2Po1E-06 [30]: Numerical and experimental study on the cryogenic freezing process of the Golden Pomfret - Dr Liubiao Chen (Technical Institute of Physics and Chemistry, CAS)  
09:00
C2Po1F - Heat Transfer - Bryant Mueller (University of Wisconsin - Madison) Ali Kashani (Atlas Scientific) (until 11:00)
09:00 C2Po1F-02 [32]: Entropy analysis of support systems in multi-channel cryogenic lines - Dr Paweł Duda (Wroclaw University of Science and Technology)  
09:00 C2Po1F-03 [33]: Effect of Solid Surface in Vicinity of Multi-bubble Array in Cryogenic Environment - Mr Joydip Mondal (Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur) Arpit Mishra (Indian Institute of Technology (IIT), Kharagpur, India)  
09:00 C2Po1F-04 [34]: Effect of Curved Rigid Surface on The Collapsing Cavitating Bubble in Cryogenic Environment - Mr Arpit Mishra (Indian Institute of Technology (IIT), Kharagpur, India)  
09:00 C2Po1F-05 [35]: Effect of wall ribs on thermal stratification and self-pressurization in a liquid hydrogen tank - Mr Soumyajit Bhowmick (National Institute of Technology Calicut)  
09:00 C2Po1F-06 [36]: A new heat transfer correlation for flow boiling of R50 in a horizontal tube - Dr Zhi-Qiang Yang (Shanghai Marine Diesel Engine Research Institute)  
09:00 C2Po1F-07 [37]: Transient conjugate heat transfer numerical simulation in superfluid helium - Andrea Vitrano  
09:00
C2Po1G - Sub-Atmospheric Refrigeration - Jay Theilacker (Fermilab) John Weisend (European Spallation Source ESS AB) (until 11:00)
09:00 C2Po1G-01 [38]: Investigation on Dry Vacuum Pumps Suitable for a 500 W@ 2K Helium Refrigerator at TIPC - Dr Shaoqi Yang (State Key Laboratory of Technologies in Space Cryogenic Propellants (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences))  
09:00 C2Po1G-02 [39]: The construction of 3.8K sub-cooling system for the KSTAR ancillary system - Dr Dong-Seong Park (National Fusion Research Institute)  
09:00 C2Po1G-04 [41]: JLab Chl1 2K Cold Box Replacement - Mrs Shirley Yang (Jefferson Lab)  
09:00 C2Po1G-05 [42]: Commissioning Plan for LCLS II 2K Cold Box - Ritendra Bhattacharya (Thomas Jefferson National Accelerator Facility)  
09:00
C2Po1H - Hydrogen and Neon Refrigeration - Carl Bunge (Washington State University) Jacob Leachman (Washington State University) (until 11:00)
09:00 C2Po1H-01 [43]: Thermodynamic and economic aspects of the Nelium Turbo-Brayton refrigerator development for the FCC-hh - Steffen Kloeppel (TU Dresden)  
09:00 C2Po1H-02 [44]: Dynamic simulation of a medium-sized hydrogen liquefier based on EcosimPro simulation software - Dr Jing Li (the Technical Institute of Physics and Chemistry)  
09:00 C2Po1H-03 [45]: Process analysis and optimization of 1000L/h medium-scale hydrogen liquefaction cycle - Yonglin Ju (Shanghai Jiao Tong University)  
09:00 C2Po1H-04 [46]: Improvement of Cryogenic System for China Spallation Neutron Source - Mr Kun He (China Spallation Neutron Source (CSNS), Institute of High Energy Physics (IHEP), Chinese Academy of Sciences (CAS) & Dongguan Institute of Neutron Science (DINS)) Mr Bin Ye (China Spallation Neutron Source (CSNS), Institute of High Energy Physics (IHEP), Chinese Academy of Sciences (CAS) & Dongguan Institute of Neutron Science (DINS))  
09:00 C2Po1H-06 [48]: Thermodynamic Design of Hydrogen Liquefaction Systems to Utilize LNG Cold Energy - Ho-Myung Chang (Hong Ik University)  
09:30
M2Or1A - BSCCO - Conductors - Eric Hellstrom (ASC/NHMFL - Florida State University) Timothy Haugan (U.S. Air Force Research Laboratory) (until 10:45)
09:30 M2Or1A-01: Advances in Bi-2212 Processing, Coil Fabrication, and Testing for High-Field Magnets - E.E. Hellstrom (Applied Superconductivity Center)  
09:45 M2Or1A-02: Variation in strain sensitivity and microstructure as a function of overpressure processing conditions for Ag-sheathed Bi-2212 round wire - Prof. Matthew C. Jewell (Materials Science Center, University of Wisconsin-Eau Claire)  
10:00 M2Or1A-03: Key Components Enabling the Strong A-axis Growth Grain Texture and Clean Grain Boundary Nanostructure in High Critical Current Density Bi-2212 Round Wires. - Temidayo Abiola Oloye (National High Magnetic Field Laboratory)  
10:15 M2Or1A-04: Predensification of Bi-2212 wires and its impact on critical current density - S Imam Hossain (National High Magnetic Field Laboratory, Florida State University, Tallahassee, Florida, FL 32310, USA)  
10:30 M2Or1A-05: Development of low loss HTS 2212 wires and cables for ac and ramped field coils - Dr Alexander Otto (Solid Material Solutions, LLC)  
09:30
M2Or1B - Focus Series B: REBCO Flux Pinning I - Mary Ann Sebastian (University of Dayton Research Institute) Judy Wu (University of Kansas) (until 11:00)
09:30 M2Or1B-01 [Invited]: Comparative studies of vortex pinning and dynamics in superconductors - Boris Maiorov (Los Alamos National Laboratory)  
10:00 M2Or1B-02 [Invited]: Flux pinning mechanism in angular dependent Jc of REBCO wire with artificial pinning centers - Prof. Kaname Matsumoto (Kyushu Institute of Technology)  
10:30 M2Or1B-03 [Invited]: Optimizing Vortex-Pinning in Superconducting Wires - Prof. Amit Goyal (University at Buffalo / Oak Ridge National Laboratory)  
10:15
M2Or1C - Thermal Properties, Radiation Effects & Degradation -Dr Klaus-Peter Weiss (KIT, Institute for Technical Physics) Hyung-Seop Shin (Andong National University) (until 12:30)
10:15 M2Or1C-01: Neutron irradiation effect on critical current of Nb3Sn wire under 8 T to 15.5 T at 5 K - Arata Nishimura (National Institute for Fusion Science)  
10:30 M2Or1C-02: In-house development of high neutron resisted insulation material for superconducting magnets fusion machines and 77 K, 4.2 K applications - Mr Rajiv Sharma (Institute for Plasma Research)  
10:45 M2Or1C-03 (Wentao Sun) - Presentation Withdrawn  
11:00 M2Or1C-04 (Quan Li) - Presentation Withdrawn  
11:15 M2Or1C-05: Thermal conductivity test of innovative insulation materials for the cryostats of FCC detector solenoids - Veronica Ilardi (Twente Technical University (NL))  
11:30 M2Or1C-06: Experimental characterization of copper-to-copper thermal contact resistance below 50 K. - Goncalo Tomas (University of Twente)  
11:45 M2Or1C-07: Thermal Properties of Isocyanate Derived Organic Aerogels for Cryogenic Insulation Applications - Prof. Jonathan Demko (LeTourneau University)  
12:00 M2Or1C-08: The low temperature thermal expansion of materials used for superconducting magnets - Kyle Radcliff (National High Field Magnetic Lavatory)  
12:15 M2Or1C-09: Macrofl¬ash Apparatus and Boiloff Calorimetry Method for the Measurement of Heat Transmission through Materials - James Fesmire (NASA)  
11:00
C2Or1A - Large Scale Systems III - Andrew Dalesandro (Fermi National Accelerator Laboratory) Joel Fuerst (SLAC) (until 12:15)
11:00 C2Or1A-01: Design status of the ESS cryogenic moderator system - Dr Hideki Tatsumoto (European Spallation Source ERIC)  
11:15 C2Or1A-02: Survey of Magnet Designs Developed for the Future Circular Collider Detectors - Herman Ten Kate (CERN)  
11:30 C2Or1A-03: Considerations for System level Design Optimization for Power Systems with Multiple Superconducting Devices - Ms Delaney Freeman (Florida State University)  
11:45 C2Or1A-04: Options for the PolFEL Cryogenic System - Dr Jaroslaw Polinski (Wroclaw University of Technology)  
12:00 C2Or1A-05: Experimental Investigations on the Cold Recovery-Efficiency of a Packed-bed in a Cryogenic Energy Storage System - Prof. Pavitra Sandilya (Cryogenic Engineering Centre, IIT Kharagpur, West Bengal, India-721302)  
11:00
C2Or1B - Non-Aerospace Applications - John Pfotenhauer (Adviser, second author) Peter Bradley (NIST) (until 12:30)
11:00 C2Or1B-01: Development of a Helium recondensing cryostat - Prof. Shridhar Bapat (Mechanical Engineering Dept., Indian Institute of Technology Bombay)  
11:15 C2Or1B-02 (Chao Wang) - Presentation Withdrawn  
11:30 C2Or1B-03: 30K to subK vibration free remote cooling systems - Mr Thierry Trollier (Absolut System)  
11:45 C2Or1B-04: Cryopump specific designs and realizations for electrical propulsion test benches - Thierry Trollier (Absolut System)  
12:00 C2Or1B-05: Load Map of Sumitomo 415DP Cryocooler in the Temperature Range of 40-400K - Dr Sergiy Putselyk (Fraunhofer FHR) Mr Thomas Wirths (Fraunhofer FHR)  
12:15 C2Or1B-06: AFCryo large scale refrigeration, liquefaction and remote cooling system portfolio - Mr Julien Tanchon (AFCryo)  
11:00
C2Or1C - Non-Aerospace VM and Thermoacoustic Cryocoolers - Peter Kittel (Retired) Ray Radebaugh (NIST) (until 11:45)
11:00 C2Or1C-01: Numerical investigation of the efficiency potential of a cryogen-free VM type pulse tube cooler - Prof. Wei Dai (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, University of Chinese Academy of Sciences)  
11:00
M2Or2A - Transportation Symposium: Transportation Motors I - Kiruba Haran (University of Illinois) Rod Badcock (Victoria University of Wellington) (until 12:30)
11:00 M2Or2A-01 [Invited]: Design of MW-Design of MW-Class Industrial Motors by AMSC - Dr Swarn Kalsi (Kalsi Green Power Systems)  
11:30 M2Or2A-02 [Invited]: Design of MW-Class Ship Propulsion Motors for US Navy by AMSC - Swarn Kalsi (Retired)  
12:00 M2Or2A-03 [Invited]: Development of fully superconducting synchronous rotating machines for e-aircrafts - Prof. Takashi Yoshida (Kyushu University)  
11:00
M2Or2B - Focus Series B: REBCO Flux Pinning II - Amit Goyal (University at Buffalo) Kaname Matsumoto (Kyushu Institute of Technology) (until 12:30)
11:00 M2Or2B-01 [Invited]: Improvement of In-field Performance of Coated Conductors in Liquid Nitrogen - Dr Teruo Izumi (Advanced Industrial Science and Technology (AIST))  
11:30 M2Or2B-02 [Invited]: Controllable generation of strong and isotropic artificial pinning centers in YBCO films - Prof. Judy Wu (University of Kansas)  
12:00 M2Or2B-03 [Invited]: Historical Review of Flux Pinning of (Y,RE)-Ba-Cu-O Coated Conductors, and Impact on Power Device Performance - Timothy Haugan (U.S. Air Force Research Laboratory)  
06:15 --- Fun Run ---
07:45 --- Registration Open (7:00 AM - 6:30 PM) ---
07:50 --- Cryo Expo Open - 9:00 AM - 12:00 PM ---
07:55 --- Cryogenic Society of America (CSA) Awards (7:55 AM - 8:15 AM) ---
08:15
Plenary: Thomas Glasmacher | FRIB/Michigan State University - Luisa Chiesa (Tufts University) Al Zeller (NHMFL, FSU) (until 09:00)
08:15 C3PL-01: The Facility for Rare Isotope Beams and the MSU Cryogenic Initiative - Dr Thomas Glasmacher (Facility for Rare Isotope Beams, Michigan State University)  
09:00 --- Morning Break (during Poster Session) ---
09:00
C3Po1A - Applications: Instrumentation and Controls - Seth Potratz (Praxair - Member of the Linde Group) Sergiy Putselyk (until 11:00)
09:00 C3Po1A-01 [24]: Characteristic analysis of resistive superconducting fault current limiters for DC applications - Prof. Dong Xia (Institute of Electrical Engineering, Chinese Academy of Sciences)  
09:00 C3Po1A-02 [23]: The new dynamic synthesis PID control for the 1.3 GHz LCLS-II Cryomodule test at Fermilab - Liujin Pei (Fermi National Accelerator Laboratory)  
09:00 C3Po1A-03 [22]: Cryogenic adsorption system for noble gas separation - Dr Xinxin Chu  
09:00 C3Po1A-04 [21]: Application of Signal Analysis in the Study of Dynamic Characteristics of Displacer in Cryocoolers - Zheng Wang (Institute of Cryogenics and Electronics)  
09:00 C3Po1A-05 [20]: Development of a Chatbot Application for Cryogenic System in Taiwan Photon Source - Hsing-Chieh Li (National Synchrotron Radiation Research Center)  
09:00 C3Po1A-06 [19]: Testing of Heat Flux Sensors at Cryogenic Temperatures - Wesley Johnson (NASA Glenn Research Center)  
09:00 C3Po1A-07 [18]: Strain measurement using FBG sensor in a rosette configuration for HTS applications - Rajinikumar Ramalingam (Karlsruhe Institute of Technology)  
09:00 C3Po1A-08 [17]: Control of Warm Compression Stations Using On-line Model Predictive Control (MPC): Experimental Results - Mr Anthony Attard (CEA)  
09:00 C3Po1A-09 [16]: Simcryogenics: a Library to Simulate and Optimize Cryoplant and Cryodistribution Dynamics - Mr Sandra Varin (CEA Grenoble / SBT)  
09:00
C3Po1B - Superconducting Magnet Systems II - Wolfgang Stautner (GE Global Research) Federica Pierro (Tufts University) (until 11:00)
09:00 C3Po1B-01 [15]: Development of the HTS Magnet for the 1 MW Superconducting Induction Heater - Shaotao Dai (Beijing Jiaotong University)  
09:00 C3Po1B-02 [14]: Improved Utilization of Cryocooling Power in Superconducting Undulators at the Advanced Photon Source - James Barkas (University of Wisconsin-Madison)  
09:00 C3Po1B-05 [12]: Cryogenic Testing of Fast Ramping Superconducting Magnets for the SIS100 Synchrotron - Mr Alexander Bleile (GSI Helmholtzzentrum für Schwerionenforschung GmbH)  
09:00 C3Po1B-07 [11]: Direct bath cooling structure and Liquid nitrogen feeding device for an 1-kW-class HTS Generator with HTS Contactless Power Supply - Prof. Ho Min Kim (Department of Electrical Engineering, Jeju National University) Mr Ji Hyung Kim (Department of Electrical Engineering, Jeju National University) Mr Yoon Seok Chae (Department of Electrical Engineering, Jeju National University)  
09:00 C3Po1B-08 [10]: Numerical study on low-temperature superconducting magnetic levitation - Mr Jinzhen Wang (1.Technical Institute of Physics and Chemistry, Chinese Academy of Sciences. 2.University of Chinese Academy of Sciences)  
09:00 C3Po1B-09 [09]: Various Quench Protection Methods for HTS Magnets - Michael Green (Lawrence Berkeley Laboratory)  
09:00
C3Po1C - Thermal Insulation Systems II - Shrikant Pattalwar (STFC Daresbury Laboratory, UK) Wesley Johnson (until 11:00)
09:00 C3Po1C-01 [08]: Heat transfer in multi-layer insulation systems - Xu Li (Technical Institute of Physics and Chemistry, CAS)  
09:00 C3Po1C-02 [07]: Emissivity measurement of materials used in cryogenic temperature - Ms Fuzhi Shen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)  
09:00 C3Po1C-03 [06]: Experimental measurements on MLI performance from 20-60 K to 4.2 K - Jaroslaw Polinski (Wroclaw University of Technology)  
09:00
C3Po1D - Very Low Temperature Aerospace Cryocoolers - Franklin Miller (University of Wisconsin - Madison) Ram Dhuley (Florida State University) (until 11:00)
09:00 C3Po1D-01 [05]: Experimental results of ADR cooling tuned for operation at 50 mK or higher temperature - Mr Jean-Marc duval (CEA)  
09:00 C3Po1D-02 [04]: Sorption compressor efficiencies of different designs - Dr Nir Tzabar (Department of Mechanical Engineering, Ariel University, Israel)  
09:00 C3Po1D-03 [03]: A two-stage closed-cycle sorption pumped 3He refrigerator with passive thermal links - Mr Neil Clarke (Oxford Instruments Nanoscience)  
09:00 C3Po1D-04 [02]: Cryocooled Cold Trap System for the SuperCDMS Dilution Refrigerator - Mr Grzegorz Tatkowski (Fermilab)  
09:00
C3Po1E - Air and Carbon Dioxide Systems - Srinivas Vanapalli (University of Twente) John Pfotenhauer (Adviser, second author) (until 11:00)
09:00 C3Po1E-01 [25]: Analysis and optimization of the liquid nitrogen pre-cooling stage for EAST helium refrigerator - Dr Zhigang Zhu (Institute of Plasma Physics, Chinese Academy of Sciences) Prof. Qiyong Zhang (Institute of Plasma Physics, Chinese Academy of Sciences)  
09:00 C3Po1E-03 [26]: Thermodynamic Performance Comparison of Miniature Liquid Nitrogen Generators driven by Mixed-refrigerant Joule–Thomson Cycle and Gas Expansion Cycle - Dr Haocheng Wang (Technical Institute of Physics and Chemistry, CAS)  
09:00 C3Po1E-04 [27]: A comparative study of two novel liquid air energy storage systems with LNG cold energy recovery - Dr Liubiao Chen (Technical Institute of Physics and Chemistry, CAS)  
09:00 C3Po1E-05 [28]: Theoretical investigation of a closed wind-solar-liquid CO2 energy storage system - Dr Liubiao Chen (Technical Institute of Physics and Chemistry, CAS)  
09:00 C3Po1E-06 [29]: Analysis of liquid air energy storage system under different minimum heat transfer temperature difference - Ms Luna Guo  
09:00 C3Po1E-07 [30]: Optimal design for cryogenic structured packing column using particle swarm optimization algorithm - Mr Bin Wang (Institute Refrigeration and Cryogenics, Zhejiang University)  
09:00
C3Po1F - Large Scale Refrigeration and Liquefaction I -Mr Renzhuo Wang (Fermilab) John Jurns (National Institute of Standards and Technology) (until 11:00)
09:00 C3Po1F-01 [31]: An update of dynamic thermal-hydraulic simulations of the JT-60SA Cryogenic system for preparing plasma operation - Ms Sandra Varin (CEA Grenoble / SBT)  
09:00 C3Po1F-02 [32]: Performance analysis of a new double stage compressor helium liquefaction cycle - Huikun Su (State Key Laboratory of Technologies in Space Cryogenic Propellants (Technical Institute of Physics and Chemistry, Chinese Academy of Science ) University of Chinese Academy of Sciences)  
09:00 C3Po1F-03 [33]: Dynamic simulation of ITER cryogenic system under D-T operation - Dr Ryuji Maekawa (ITER Organization)  
09:00 C3Po1F-04 [34]: Stability factor on the liquid helium temperature measurement - Dr Shaoqi Yang (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS, PR. China)  
09:00 C3Po1F-05 [35]: Cryogenic System for Shanghai Synchrotron Radiation Facility - Barbier Anne (Air Liquide Advanced Technologies)  
09:00 C3Po1F-06 [36]: Recent Progress on Cryogenic Fluid Systems - Mr Lev Reznikov (The Bionetics Corporation Space and Engineering)  
09:00
C3Po1G - Cryogenic Distribution Systems -Mr Joe Hurd (Fermilab) Jaroslaw Fydrych (European Spallation Source ESS AB) (until 11:00)
09:00 C3Po1G-01 [37]: PIP-II Injector Test Cryogenic Transfer Line Design, Installation and Commissioing Experience - Mr Renzhuo Wang (Fermilab)  
09:00 C3Po1G-02 [38]: Helium Transfer Line with Conduction-Cooled Nb-Ti Superconducting Wires for COMET Muon Transport Solenoid. - Dr Takahiro Okamura (KEK)  
09:00 C3Po1G-04 [40]: Status of The LCLS-II Cryogenic Distribution System - William Soyars (Fermilab)  
09:00 C3Po1G-05 [41]: Design and Fabrication of the Mu2e Cryogenic Distribution System - Michael White (Fermilab)  
09:00 C3Po1G-06 [42]: Overview of the distribution system of the SHINE cryogenic test facility - Dr Lei Zhang  
09:00 C3Po1G-07 [43]: Design and Construction of Helium Transfer and Distribution System of Cryogenic System II of SSRF - Jian Cui (Shanghai Institute of Applied Physics, Chinese Academy of Sciences)  
09:30
M3Or1A - REBCO & Nb3Sn Cables for Magnets - Herman Ten Kate (CERN) Peter McIntyre (Texas A&M University) (until 11:00)
09:30 M3Or1A-01 [Invited]: Recent progress on CORC® cable, wire and magnet development - Danko van der Laan (Advanced Conductor Technologies)  
10:00 M3Or1A-02 [Invited]: Development of ReBCO-CORC Conductors and Magnet Technology at CERN - Herman Ten Kate (CERN)  
10:30 M3Or1A-03: HTS Roebel cables, status and potential - Dr Wilfried Goldacker (Karlsruhe Institute of Technology)  
10:45 M3Or1A-04: Modelling of Field Error and Field Error Drift of CORC®-based Prototype Accelerator Magnets - Cory Myers (Ohio State University)  
09:30
M3Or1B - Microelectronics I - Vyacheslav Solovyov (Brookhaven Technology Group) Thomas Bullard (UES Inc.) (until 11:00)
09:30 M3Or1B-01 [Invited]: Recent Progress on Flexible Superconducting Integration Technology: Cables and Connectors - Dr Michael Hamilton (Auburn University)  
10:00 M3Or1B-02 [Invited]: Planar MgB2 Josephson junctions and arrays made by focused helium ion beam - Prof. Ke Chen (Temple University)  
10:30 M3Or1B-03 [Invited]: REBCO Tapes on Flexible Dielectric Substrates as Transmission Lines for High Frequency Applications - Venkat Selvamanickam (University of Houston)  
09:30
M3Or1C - Focus Series C: Superconducting RF Cavity Materials III - Shreyas Balachandran (National High Field Magnet Laboratory) Karl Hartwig (Texas A&M University) (until 11:00)
09:30 M3Or1C-01 [Invited]: Direct observation of nanometer scale niobium hydride (Nb1-xHx) on SRF Nb cavity surface using cryogenic atomic force microscopy (AFM) - Dr Zuhawn Sung (Fermi National Accelerator Laboratory)  
10:00 M3Or1C-02 [Invited]: Nitrogen doping, nitrogen infusion, and niobium-3 tin: recent challenges and advances in fundamental SRF accelerator physics - Mr James Maniscalco (Cornell University)  
10:30 M3Or1C-03: Growth Mechanism and Kinetics of Nb3Sn coating in tin vapor diffusion process - Uttar Pudasaini (The College of William and Mary)  
10:45 M3Or1C-04: Development of MgB2/Cu cavities by HPCVD - Ke Chen (Temple University)  
11:00
C3Or1A - Superfluid Helium - Michael DiPirro (NASA - Goddard Space Flight Center) John Weisend (European Spallation Source ESS AB) (until 12:30)
11:00 C3Or1A-01: Development of a Helium-3 Cryostat for Ultra-Cold Neutron Source - Dr Shinsuke Kawasaki (KEK)  
11:15 C3Or1A-02: Thermo-Fluid Analyses and Experiments for UCN Cryogenic System - Dr Takahiro Okamura (KEK)  
11:30 C3Or1A-03: Quench spot detection for SRF cavities via flow visualization in superfluid helium-4 - Dr Shiran Bao (National High Magnetic Field Laboratory)  
11:45 C3Or1A-04: Comparative study of heat transfer performance and visualization images of superfluid helium boiling in narrow two-dimensional channel - Dr Suguru Takada (National Institute for Fusion Science)  
12:00 C3Or1A-05 [Invited]: Numerical modeling of a sub-Kelvin Active Magnetic Regenerative Refrigeration Cycle - Chloe Gunderson (University of Wisconsin-Madison)  
11:00
C3Or1B - Large Scale Refrigeration and Liquefaction - FRIB - Philipp Arnold (European Spallation Source ESS AB) William Soyars (Fermilab) (until 12:30)
11:00 C3Or1B-01: FRIB Cryogenic System Status - Dr Venkatarao Ganni (Facility for Rare Isotope Beams - Michigan State University)  
11:15 C3Or1B-02: FRIB Helium Refrigeration System Commissioning and Performance Test Results - Dr Nusair Hasan (Facility for Rare Isotope Beams - Michigan State University)  
11:30 C3Or1B-03: Cryogenic Design of FRIB Cryomodule and Distribution System Status - Dr Venkatarao Ganni (Facility for Rare Isotope Beams - Michigan State University)  
11:45 C3Or1B-04: Design, Fabrication, Commissioning and Testing of FRIB 2 K Cold Compressor System - Dr Peter Knudsen (Facility for Rare Isotope Beams - Michigan State University)  
12:00 C3Or1B-05: FRIB Cryogenic Control System - Mr Nathan Joseph (Facility for Rare Isotope Beams (FRIB), Michigan State University (MSU))  
12:15 C3Or1B-06: FRIB Helium Compression System Commissioning and Performance Test Results - Dr Peter Knudsen (Facility for Rare Isotope Beams - Michigan State University)  
11:00
M3Or2A - Transportation Symposium: Transportation Motors IV: with Cryo - John Durrell (University of Cambridge) Jason Hartwig (NASA / GRC) (until 12:30)
11:00 M3Or2A-01 [Invited]: Study of Thermosyphon Cooling System for High-temperature Superconducting Machinery - Mitsuru Izumi (Tokyo University of Marine Science and Technology (TUMSAT))  
11:30 M3Or2A-02 [Invited]: Electric Aircraft Cryogenic Cooling with Thermo-acoustic Exergy Management - Dr Rodger Dyson (NASA)  
12:00 M3Or2A-03 [Invited]: Effect of Non-Uniformity of Electric Field on Breakdown Strength of Cryogenic Gaseous Insulation Media for Superconducting Power Applications - Srikar Telikapalli (florida state university)  
11:00
M3Or2B - AC Loss YBCO - Takanobu Kiss (Kyushu University) Milan Majoros (The Ohio State University) (until 12:45)
11:00 M3Or2B-01 [Invited]: Transport performance and AC loss of superconducting cables comprised of exfoliated YBCO filaments - Vyacheslav Solovyov (Brookhaven Technology Group)  
11:30 M3Or2B-02 [Invited]: Measurements and Modelling of YBCO Cable at High dB/dt for various HTS cables - Mike Sumption (The Ohio State University)  
12:00 M3Or2B-03: Modeling current sharing and protection in a coated conductor-wound racetrack coil with various interlayer contact resistance values - Milan Majoros (The Ohio State University)  
12:15 M3Or2B-04: A Study of the Individual Contributions of Heat Generated by a XRISM/Resolve ADR Stage Magnet and its Magnetic Shielding - Richard Ottens (NASA Goddard Space Flight Center)  
12:30 M3Or2B-05: Calorimetric Measurements of YBCO Superconductor and Metallic Cables at High dB/dt in a Cryogenic Stator Machine Environment - Timothy Haugan (U.S. Air Force Research Laboratory)  
11:00
M3Or2C - Focus Series D: Quantum Computing I - Amir Jahromi (NASA/GSFC) Mike Sumption (The Ohio State University) (until 12:30)
11:00 M3Or2C-01 [Invited]: Detecting Single Photons with a Graphene-Based Josephson Junction - Evan D. Walsh (School of Engineering and Applied Sciences, Harvard University)  
11:30 M3Or2C-02 [Invited]: Towards a Fluxonium Quantum Processor - Long Bao Nguyen (University of Maryland, College Park)  
12:00 M3Or2C-03 [Invited]: Quasiparticle Dynamics in Offset-Charge-Sensitive Transmons - Spencer Diamond (Yale University)  
07:40 --- Registration Open (7:00 AM - 10:00 AM) ---
07:45 --- CEC Scholarship Awards (7:45 AM - 7:55 AM) ---
07:55
Plenary: Zach Hartwig | MIT, Plasma Science & Fusion Center - Mike Sumption (The Ohio State University) Wilfried Goldacker (Karlsruhe Institute of Technology / ITEP) (until 08:40)
07:55 M4PL-01: SPARC: The High-field Path to Fusion Energy - Zach Hartwig (MIT)  
08:40 --- Closing ---
08:45 --- Coffee Break ---
09:30
C4Or1A - Aerospace Cryocoolers III - Amir Jahromi (NASA/GSFC) Ted Conrad (FLIR Systems) (until 10:45)
09:30 C4Or1A-01: Vibration-heating in ADR Kevlar suspension systems - James Tuttle (NASA/GSFC)  
09:45 C4Or1A-02: Status report on the performance of a flight-worthy 4 – 10 K Adiabatic Demagnetization Refrigerator for use in a 50 mK to 10 K Continuous Adiabatic Demagnetization Refrigerator - Dr Amir Jahromi (NASA - Goddard Space Flight Center)  
10:00 C4Or1A-03: 80 K vibration-free cooler for potential future Earth Observation missions - Mr J. Barreto (LIBPhys-UNL)  
10:15 C4Or1A-04: Design and Test of Cryogenic Flex Cables for Euclid Near Infrared Spectrophotometer - Warren Holmes (JPL)  
10:30 C4Or1A-05: Modifications to the MIRI Cryocooler design to provide significant lift in the 2K to 4K range - Michael Petach (Northrop Grumman Aerospace Systems)  
09:30
C4Or1B - Large Scale Refrigeration and Liquefaction II - Ryuji Maekawa (ITER Organization) Jay Theilacker (Fermilab) (until 11:15)
09:30 C4Or1B-01: Experience from the outsourcing of the Cryogenic Operation & Maintenance at CERN - Frederic Ferrand (CERN)  
09:45 C4Or1B-02: Preliminary Conceptual Design of FCC-hh Cryo-Refrigerators: Air Liquide Study - Mr Laurent Tavian (CERN)  
10:00 C4Or1B-03: Process control system evolution for the LHC Cold Compressors at CERN - Mr Victor Lefebvre (CERN)  
10:15 C4Or1B-04: Commissioning of the Warm Compressor System for the ESS Accelerator Cryoplant - Mr Philipp Arnold (ESS)  
10:30 C4Or1B-05: RAON - SCL2 - Cryogenic Plant Basic Design Presentation - Yannick Fabre (AIR LIQUIDE Advanced Technologies)  
10:45 C4Or1B-07: Experiences during design, fabrication, assembly and factory acceptance test of ITER Cryoplant Termination Cold Box - Mr Pratik Patel (ITER-India, Institute for Plasma Research)  
11:00 C4Or1B-08: Turbo-Brayton cryogenic systems : commissioning of TBF-175 for HTS cable cooling - Cecile Gondrand (Air Liquide Advanced Technologies)  
09:30
C4Or1C - Aerospace Applications - Exploring the Universe - Wesley Johnson (NASA / GSFC) Jacob Leachman (Washington State University) (until 11:15)
09:30 C4Or1C-01: Cryosystem Design for the Origins Astrophysics Flagship Mission - Michael DiPirro (NASA/Goddard Space Flight Center)  
09:45 C4Or1C-02: High Temperature Superconductor Lead Assemblies for XRISM - Dr Edgar Canavan (NASA–Goddard Space Flight Center)  
10:00 C4Or1C-03: Thermal Design and On-orbit Performance of the ECOSTRESS Instrument - Dr Jeff Cha (Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, 91109)  
10:15 C4Or1C-04: TurboBrayton cryocooler suitable for on-board electrical propulsion - Mr Julien Tanchon (Absolut System)  
10:30 C4Or1C-05: Propellant Liquefaction Modeling and Comparison to Test Results - Dr Ali Kashani (MEI Company)  
10:45 C4Or1C-06: Helium Permeation through Polymer Films at Cryogenic Temperatures - Kjell Westra (Hydrogen Properties for Energy Research Laboratory, School of Mechanical and Materials Engineering, Washington State University, Pullman, WA, 99164-2920 USA)  
11:00 C4Or1C-07: Cryogenic Design and Test Considerations in Support of Drilling on the Lunar Surface - Mr Stephen Nieczkoski (Thermal Space Ltd.)  
09:30
M4Or1A - Transportation Symposium: Transportation Power Electronics - Milan Majoros (The Ohio State University) Sonja Schlachter (Karlsruhe Institute of Technology) (until 11:30)
09:30 M4Or1A-01 [Invited]: Recent Developments at NASA Glenn towards a Fully Superconducting Electric Machine - Jason Hartwig (NASA Glenn Research Center)  
10:00 M4Or1A-02 [Invited]: Dynamic and Static Characteristics of Press Pack IGBT at RT and 77 K - Chanyeop Park (Georgia Tech)  
10:30 M4Or1A-03: Electrical Performance of Cryogenic Inductors - Chanyeop Park (Georgia Tech)  
10:45 M4Or1A-04: Understanding Surface Flashover in Helium Gas Cooled High Temperature Superconducting Devices - Mr Aws Al-Taie (Florida State University)  
11:00 M4Or1A-05 [Invited]: Development of Superconducting-Magnetic-Energy-Storage (SMES) for Electric Aircraft Propulsion - Timothy Haugan (U.S. Air Force Research Laboratory)  
09:30
M4Or1B - Microelectronics II - Michael Hamilton (Auburn University) Ke Chen (Temple University) (until 11:00)
09:30 M4Or1B-01 [Invited]: Improved RF Receiver Performance and Efficiency with Analog Preprocessing: a Cryogenic Engineering Opportunity - Anna Leese de Escobar (NIWC Pacific)  
10:00 M4Or1B-02 [Invited]: Microwave Antenna Properties of an Optically Triggered Superconducting Ring - Dr Thomas Bullard (UES Inc.)  
10:30 M4Or1B-03 [Invited]: High Throughput and Variable Temperature Test and Evaluation of Superconductor Integrated Circuits using Integrated Cryogenic Electronics Testbed - Mr Anubhav Sahu (HYPRES)  
PM
15:00 --- Registration Open ---
18:30 --- Welcome & Exhibitor Reception ---
12:30 --- Lunch (on your own) ---
14:00
C1Po2A - Structures and Contaminants -Mr Dan Hauser (NASA-Glenn Research Center) Kjell Westra (Washington State University) (until 16:00)
14:00 C1Po2A-01 [24]: Electrical Tree Aging of Epoxy-Based Nanocomposites at Cryogenic Temperature - Chuanjun Huang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)  
14:00 C1Po2A-02 [23]: Current status of a cryostat for the provision of hydrogen with adjustable ortho-para-ratios for neutron moderation - Sebastian Eisenhut (TU Dresden)  
14:00 C1Po2A-03 [22]: Hydrogen contaminations in liquid helium - Mr Julian Will (Technische Universität Dresden)  
14:00 C1Po2A-04 [21]: Ultimate Tensile Strengths of 3D Printed Carbon-fiber Reinforced Thermoplastics in Liquid Nitrogen - Mathew Hunt (Washington State University)  
14:00 C1Po2A-05 [20]: Design of a Cryogenic-compressed Hydrogen Storage and Supply System for Fuel Cell Stacks of Heavy Trucks - Mr Zhan Xu (School of Mechanical and Engineering, Southeast University, Nanjing, 21000, China)  
14:00 C1Po2A-06 [19]: Direct measurement of residual strains in epoxy resin using embedded strain gauges - Mr Huang Chuanjun  
14:00 C1Po2A-07 [18]: Use of Galinstan as a Contact Agent for Additively Manufactured Components in Cryogenic Engineering - Wolfgang Stautner (GE Global Research)  
14:00
C1Po2B - Helium Purification - Steven Van Sciver (Florida State University) Steffen Kloeppel (TU Dresden) (until 16:00)
14:00 C1Po2B-01 [17]: Numerical study of the effect of the helium-based multi-component gas mixture on the internal purifier - Qiming Jia (State Key Laboratory of Technologies in Space Cryogenic Propellants (Technical Institute of Physics and Chemistry, Chinese Academy of Science )) Mr Peng Xu (Technical Institute of Physics and Chemistry of Chinese Academy of Science) Weiping Zhu (State Key Laboratory of Technologies in Space Cryogenic Propellants (Technical Institute of Physics and Chemistry, Chinese Academy of Science )) Mr Guochao Feng (Anyang Institute of Technology)  
14:00 C1Po2B-02 [16]: Freeze-Out Purifier for Helium Refrigeration System Applications - Mr Duncan Kroll (Michigan State University)  
14:00 C1Po2B-04 [15]: Design and theoretical analysis of Helium Purification System Components for NSRRC Cryogenic System - Mr Ping-Shun Chuang (National Synchrotron Radiation Research Center)  
14:00
C1Po2C - Argon, Hydrogen, and Nitrogen Systems - John Weisend (European Spallation Source ESS AB) Xilong Wang (European Spallation Source ERIC ) (until 16:00)
14:00 C1Po2C-01 [14]: Recovery of Ultra-High Purity Liquid Argon Systems after Disruption of Filtration - Schwartz Fritz (FNAL) Mike Zuckerbrot (FNAL)  
14:00 C1Po2C-03 [13]: Return to Service of a Liquid Hydrogen Storage Sphere - Angela Krenn (NASA)  
14:00 C1Po2C-05 [12]: Design of The Dune Apatf Cryogenic System - Andrew Dalesandro (Fermi National Accelerator Laboratory)  
14:00 C1Po2C-06 [11]: Progress towards operation of a deuterium cold neutron source at the NCNR - John Jurns (National Institute of Standards and Technology)  
14:00
C1Po2D - Heat Exchangers - John Weisend (European Spallation Source ESS AB) Bertrand Baudouy (CEA Saclay) (until 16:00)
14:00 C1Po2D-01 [10]: Experimental and numerical investigation of 2 K heat exchanger for superfluid cryogenics system at KEK - Mr Ashish Kumar (The Graduate University for Advanced Studies (SOKENDAI))  
14:00 C1Po2D-03 [09]: Numerical Study on Non-equal Section Regenerator Performance for Pulse Tube Cryocooler - Prof. Houlei Chen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)  
14:00 C1Po2D-04 [08]: Asymmetric Research on Multi-bypass for Pulse Tube Cryocooler - Prof. Houlei Chen (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)  
14:00 C1Po2D-05 [07]: Comparative study on performance of regenerator under different fillers - Ms Chi Chunyun (1.Technical Institute of Physics and Chemistry, Chinese Academy of Sciences 2.University of Chinese Academy of Sciences)  
14:00 C1Po2D-06 [06]: Optimum Design of Cryogenic Plate-Fin Heat Exchangers Based on Volume Minimization - Dr Weiping Zhu (State Key Laboratory of Technologies in Space Cryogenic Propellants(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences),)  
14:00 C1Po2D-07 [05]: Entropy generation in the woven mesh regenerator filler of cryocoolers - Ali Ghavami (Georgia Tech)  
14:00
M1Po2A - Bulk Superconductors - John Durrell (University of Cambridge) Tatiana Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine) (until 16:00)
14:00 M1Po2A-01 [25]: Synthetic Route to Eliminate Oxide Byproducts and Its Effects on Intergrain Connectivity in K-doped BaFe2As2 Polycrystalline Bulks - Chongin Pak (Applied Superconductivity Center, National High Magnetic Field Laboratory)  
14:00 M1Po2A-02 [26]: The Effect of Pressure and Doping on the Critical Current Density in Nickel doped BaFe2As2 - T. J. Bullard (UES Inc. Dayton, OH)  
14:00 M1Po2A-03 [27]: The Role of Cold High Pressure Densification (CHPD) on Enhancing Critical Current Density and Connectivity of in-situ MgB2 Strand. - Fang Wan (The Ohio State University)  
14:00 M1Po2A-04 [28]: Structure and properties of MgB2 bulks - Tetiana Prikhna (Institute for Superhard Materials of the National Academy of Sc)  
14:00 M1Po2A-05 [29]: Importance of Tensile Strength in Bulk Superconductors - Dr John Durrell (University of Cambridge)  
14:00 M1Po2A-06 [30]: Magnetic field simulation and measurement of HTS magnetic suspension system - Prof. Jihao Wu (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences)  
14:00
M1Po2B - REBCO at High Stress - Pierre Bauer (ITER) Hyung-Seop Shin (Andong National University) (until 16:00)
14:00 M1Po2B-01 [31]: Critical Current Measurments of Comercial REBCO Tapes as Function of Strain, Temperature and Magnetic Field - Federica Pierro (Tufts University)  
14:00 M1Po2B-02 [32]: Vortex pinning changes caused by external mechanical loading of REBCO coated conductor - Mr Xinbo Hu (ASC, NHMFL, FSU)  
14:00 M1Po2B-03 [33]: Investigation of Electromechanical Properties in REBCO Coated Conductor Tapes during Fatigue Test at 77 K - Hyung-Seop Shin (Andong National University)  
14:00 M1Po2B-04 [34]: The Effect of Reinforcement Substrate Alloy Selection On Mechanical Properties of REBCO Coated Conductor - Kyle Radcliff (National High Field Magnetic Lavatory)  
14:00 M1Po2B-05 [35]: Magneto-Optical, electromagnetic and SEM study of slitting edge damage in 2G HTS tapes - Dr Anatolii Polyanskii (FSU, NHMFL, ASC)  
14:00
M1Po2C - Coil, Conductors, Devices and Properties -Prof. Quan Li (University of Edinburgh) Matthew C. Jewell (Materials Science Center, University of Wisconsin-Eau Claire) (until 16:00)
14:00 M1Po2C-01 [36]: Quench, Normal Zone Propagation Velocity, and the Development of an Active Protection Scheme for a Conduction Cooled, R&W, MgB2 MRI Segment Coil - Ms Danlu Zhang (The Ohio State University)  
14:00 M1Po2C-02 [37]: High Speed Spin Test of Reinforced 2212 Superconductor - Mr Connor Allen Mr Matt Franchi CJ Favazza (Student at Wentworth Institute of Technology)  
14:00 M1Po2C-04 [39]: Development of an in-situ analysis instrument for micro-mechanics of materials with low temperature - Dr Liubiao Chen (Technical Institute of Physics and Chemistry，Chinese Academy of Sciences)  
14:00 M1Po2C-06 [40]: Influence of Curing Temperature on Thermal Conductivity and Electrical Insulation Properties of Epoxy/Aluminum Nitride Composites - Dr Teng Zhang (School of Electrical Engineering, Beijing Jiaotong University)  
14:00 M1Po2C-09 [42]: 2-layer Cable-in-Conduit for hybrid-coil magnets - Peter McIntyre (Texas A&M University)  
14:00 M1Po2C-10 [43]: Magnetic Modelling of Fields and Losses in Fast Switching, Polarizing, Superconducting Undulators - Milan Majoros (The Ohio State University)  
14:00 M1Po2C-11 [44]: AC Loss Analysis on Coated Conductors at different sinusoidal frequencies for Electric Propulsion Applications - Abhinav Kumar (Lovely Professional University, Phagwara)  
14:00
M1Po2D - Thermal, Electrical, and Magnetic Materials Properties - Klaus-Peter Weiss (KIT, Institute for Technical Physics) Steve Krave (Fermilab) (until 16:00)
14:00 M1Po2D-01 [45]: DC Surface Flashover Characteristics of ZnO/EP Composites at 77K - Kaikai Zhang (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, CAS and Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences)  
14:00 M1Po2D-03 [46]: Cryogenic Thermal Conductivity Measurements of 3D Printed Polymer Materials - Ian Richardson (Washington State University)  
14:00 M1Po2D-04 [47]: Quantum effects in graphitic materials - Timothy Haugan (U.S. Air Force Research Laboratory)  
14:00 M1Po2D-05 [48]: The implementation of Rashba-type asymmetric spin-orbit coupling in the theory of superconductivity: the strong-coupling approach - Ms Izabela Wrona (Institute of Physics, Jan Dlugosz University in Czestochowa)  
14:00 M1Po2D-06 [49]: Superconducting state at a square lattice: a case of linear electron-phonon interaction - Ms Kamila Agnieszka Szewczyk (Department of Theoretical Physics, Institute of Physics, Jan Długosz University in Częstochowa)  
14:00 M1Po2D-08 [50]: Analysis of negative magnetoresistance behaviors in diluted granular multilayers system at low temperatures - Prof. Adil Echchelh (Laboratory of Energetic Engineering and Materials, Faculty of Sciences Ibn Tofail, Kenitra, Morocco.)  
14:00 M1Po2D-09 [51]: Screening phenomenon and hopping in two dimensional GaAs holes system at very low temperatures - Prof. ABDELHAMID EL KAAOUACHI (Faculty of sciences of Agadir Morocco)  
15:00 --- Afternoon Break (during Poster Session) ---
16:00
C1Or2A - Applications: Safety and Instrumentation - Ziemowit Malecha (Wroclaw University of Technology) Sergiy Putselyk (FHR) (until 18:00)
16:00 C1Or2A-01: High Level Gamma Radiation Effects on Platinum and Silicon Diode Cryogenic Temperature Sensors - Scott Courts (Lake Shore Cryotronics, Inc.)  
16:15 C1Or2A-02: Numerical study of a consequence of a vacuum insulation degradation in a cryogenic system - Ziemowit Malecha (Wroclaw University of Technology)  
16:30 C1Or2A-03: Cryogenic Storage and Supply Systems for Breathing Protection - Rohan Fernando (CDC-NIOSH)  
16:45 C1Or2A-04: How the Sample Environment Communication Protocol may benefit the automation of commercial cryogenic equipment - Mr Anthony Ruffino (Drexel University)  
17:00 C1Or2A-05: Stable Operation of Cryogenic System at 2K during the RF or Magnet Power Variations - Dr Sergiy Putselyk (FHR)  
17:15 C1Or2A-06: HECAL: A cryostat for calibration of hot wires - Dr Alain Girard (CEA Grenoble)  
17:30 C1Or2A-07: Measurement of heat flux in multi-layer insulated helium cryostats after loss of insulating vacuum - Andre Henriques (CERN)  
17:45 C1Or2A-08: A new European Standard for the protection of helium cryostats against excessive pressure - Prof. Steffen Grohmann (Karlsruhe Institute of Technology, Institute for Technical Thermodynamics and Refrigeration, Institute for Technical Physics)  
16:00
C1Or2B - Superconducting RF Systems, Power Cables, and Leads I - Thomas Nicol (Fermilab) Jonathan Demko (LeTourneau University) (until 17:45)
16:00 C1Or2B-01: Understanding the Response of High Temperature Superconducting Power Cables in Electrical Faults - Sastry Pamidi (The Florida State University)  
16:15 C1Or2B-02: Development of a coaxial dipole designs using superconducting gas-insulated lines - Dr Sastry Pamidi (The Florida State University)  
16:30 C1Or2B-03: Conduction-cooled SRF cavities: Apparatus and first results - Ram Dhuley (Fermilab)  
16:45 C1Or2B-04: Cryogenic system configurations to cool superconducting radio frequency cavities at 2 K - Dr Dhananjay Ravikumar (Brookhaven National Laboratory)  
17:00 C1Or2B-05: Analysis of the thermal recovery of HTS cables after an overcurrent fault - Jonathan Demko (LeTourneau University)  
17:15 C1Or2B-06: Quick-replacement high-temperature superconducting current leads for use in a research cryostat - Dr Mark Kimball (NASA/Goddard Space Flight Center)  
17:30 C1Or2B-07: Investigation of Cryogenic Mixed-Refrigerant Cooled Current Leads in Combination with Peltier Elements - Shabagin Eugen (Karlsruhe Institute of Technology (KIT))  
16:00
M1Or3A - Memorial Session: Dedicated to Prof. Tachikawa - Hiroaki Kumakura (National Institute for Materials Science) Wilfried Goldacker (Karlsruhe Institute of Technology / ITEP) (until 18:00)
16:00 M1Or3A-01 [Invited]: My studies of Nb3Sn, V3Ga and Nb3Al wires and tapes in National Research Institute for Metals(NRIM) - Dr Hiroaki Kumakura (National Institute for Materials Science)  
16:20 M1Or3A-02 [Invited]: Role of strains in superconducting Nb3Sn - Dr Wilfried Goldacker (Karlsruhe Institute of Technoloigy)  
16:40 M1Or3A-03 [Invited]: Alloying additions to Nb3Sn – are they still an unfinished business? (a tribute to the life and work of Kyoji Tachikawa) - David Larbalestier (National High Magnetic Field Laboratory)  
17:00 M1Or3A-04 [Invited]: Present Status and Future Prospects of Nb3Al Conductor Development in National Institute for Materials Science - Akihiro Kikuchi (National Institute for Materials Science)  
17:20 M1Or3A-05 [Invited]: Nb3Sn conductors with artificial pinning centers - Xingchen Xu (Fermi National Accelerator Lab)  
17:40 M1Or3A-06 [Invited]: Jc enhancement and changes in the pinning mechanisms in newly alloyed Nb3Sn for FCC application - Dr Chiara Tarantini (National High Magnetic Field Laboratory, Florida State University)  
16:00
M1Or3B - Focus Series A: REBCO Coated Conductors III - Jun-ichi Shimoyama (Aoyama Gakuin University) Boris Maiorov (Los Alamos National Laboratory) (until 18:00)
16:00 M1Or3B-01 [Invited]: Transient liquid assisted growth: why is it a new opportunity for nanostructured coated conductors? - Xavier Obradors (ICMAB - CSIC)  
16:25 M1Or3B-02 [Invited]: ReBCO processing techniques and cryogenic measurements to enhance 2G HTS quality - Mr Ken Pfeiffer (STI)  
16:50 M1Or3B-03 [Invited]: Progress in 2G HTS wire development at MetOx - Mr Mikhail Novozhilov (Metal Oxide Technologies LLC)  
17:15 M1Or3B-04 [Invited]: Progress in scale up of thick-film 2G-HTS with artificial pinning centers - Prof. Goran Majkic (University of Houston)  
17:40 M1Or3B-05 [Invited]: Round REBCO Wires with Excellent Flexibility and High Engineering Current Densities - Venkat Selvamanickam (University of Houston)  
16:00
M1Or3C - Focus Session: Magnets & Epoxy - Kathleen Amm (Brookhaven National Laboratory) David Evans (ITER Organization) (until 18:00)
16:00 M1Or3C-01 [Invited]: Resins for Superconducting Magnet Construction – An Overview of Requirements, Processing and Properties - Prof. David Evans (Advanced Cryogenic Materials Ltd)  
16:25 M1Or3C-02 [Invited]: Epoxy and quench training of Nb3Sn accelerator magnets - Tengming Shen (Lawrence Berkeley National Lab)  
16:50 M1Or3C-03 [Invited]: Tough Epoxy Systems for the Impregnation of (Future) High Field Superconducting Magnets - Prof. Theo A. Tervoort (Soft Materials, Department of Materials, ETH Zürich, Zürich, Switzerland)  
17:15 M1Or3C-04 [Invited]: Low Temperature Mechanical Properties of Two Epoxies used for Superconducting Magnet Impregnation - Robert Walsh (Florida State University)  
17:40 M1Or3C-05 [Invited]: Investigation of Thermoplastic Matrix Materials for Nb3sn Superconducting Coils - Steve Krave (Fermilab)  
12:30 --- Lunch (on your own) ---
13:30
C2Po2A - Test Facilities - Roger Jon Rabehl (Fermi National Accelerator Lab. (US)) Michael Green (LBNL) (until 15:30)
13:30 C2Po2A-02 [24]: Performance of the Helium Cryogenic Subcooled Testing Platform - Mrs Zhiwei Zhou Mr Qiyong Zhang Mr Anyi Cheng  
13:30 C2Po2A-03 [23]: Design and Commissioning of a 700W@3K sub-cooled helium test facility - Dr XiaoFei Lu (Institute of Plasma Physics,Chinese Academy of Sciences)  
13:30 C2Po2A-04 [22]: Control and Commissioning of a Subcooled Helium Cryogenic Testing Platform with Cold Compressors - Dr Zhigang Zhu (Institute of Plasma Physics Chinese Academy of Sciences) Prof. Qiyong Zhang (Institute of Plasma Physics Chinese Academy of Sciences) Dr Zhiwei Zhou (Institute of Plasma Physics Chinese Academy of Sciences)  
13:30 C2Po2A-05 [21]: Design, procurement, installation and commissioning of the cryogenic infrastructure for a new superconducting RF test facility with beam at CERN. - Laurent Delprat (CERN)  
13:30 C2Po2A-06 [20]: Cryogenic Upgrade of the Helium Central Liquefier and Superconducting Cable & Wire Test Facilities at CERN - Olivier Pirotte (CERN - European Organization for Nuclear Research, CH-1211 Geneva 23, Switzerland)  
13:30 C2Po2A-09 [19]: Compact cryogenic test stand for superconducting magnets characterization - Romain Bruce (CEA Saclay)  
13:30 C2Po2A-10 [18]: Fermilab Helium Cryogenic Test Facilities - Mr Joe Hurd (Fermilab)  
13:30 C2Po2A-11 [17]: Leak detection system for valves at 20 K with a G-M cryocooler - Mr Lv Bingkun (Technical Institute of Physics and Chemistry，CAS)  
13:30
C2Po2B - Motors and Devices - John Brisson (MIT) Wolfgang Stautner (GE Global Research) (until 15:30)
13:30 C2Po2B-01 [16]: Development of a cryogenic loop heat pipe for space applications - Mr Jaehwan Lee (Changwon National University)  
13:30 C2Po2B-02 [15]: A study of thermal performance change of cryogenic heat pipes by wick structures for wide range of working fluid filling ratio - Mr Ramnarong Wanison (The Graduate University For Advanced Studies (SOKENDAI))  
13:30 C2Po2B-03 [14]: The Theoretical Analysis and Test Technology of the Moving Magnet Linear Motor - Prof. Ming Xia (Kunming Institute of Physics)  
13:30 C2Po2B-06 [12]: Design and experimental research of the cryogenic ejector to inject liquid nitrogen - Mr Qiming Jia (State Key Laboratory of Technologies in Space Cryogenic Propellants(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences),University of Chinese Academy of Sciences) Dr Weiping Zhu (State Key Laboratory of Technologies in Space Cryogenic Propellants(Technical Institute of Physics and Chemistry, Chinese Academy of Sciences))  
13:30 C2Po2B-07 [11]: Influence of Ionizing Radiation on the Design of Cryogenic Valves and Components - Mr Guido Consogno (WEKA AG)  
13:30 C2Po2B-08 [10]: Molecular simulation on adsorption of helium by activated carbon with temperature below 10 K - Dr Liubiao Chen (Technical Institute of Physics and Chemistry，Chinese Academy of Sciences) Prof. Junjie Wang (Technical Institute of Physics and Chemistry, CAS)  
13:30
C2Po2C - Superconducting RF Systems, Power Cables, and Leads II - Chanyeop Park (Georgia Tech) Al Zeller (NHMFL, FSU) (until 15:30)
13:30 C2Po2C-01 [09]: Cryogenics Performance of the Vertical Cryostat for testing ESS-SRF high Beta cavities - Mr Shrikant Pattalwar Dr Andrew May (STFC Daresbury Laboratory)  
13:30 C2Po2C-02 [08]: Thermal Optimization in Design of Functional Insertion Components for Cryogenic Applications - Prof. Jonathan Demko (LeTOURNEAU University)  
13:30 C2Po2C-03 [07]: Hydraulic characteristics of liquid nitrogen at the slope section in a concentric HTS cable - Mr Bangzhu Wang (Beijing Jiaotong University)  
13:30 C2Po2C-04 [06]: Preliminary design of the electrical feeding devices for the HL LHC superconducting powering - Yann Leclercq (CERN)  
13:30 C2Po2C-05 [05]: A Cryogenic System for 23 kV-2 kA SFCL with GM Coolers and Inverter Compressors - Ho-Myung Chang (Hong Ik University)  
13:30 C2Po2C-06 [04]: A multi-experiment cryostat for conducting a range of measurements on SRF thin films and cavities - Mr Shrikant Pattalwar (STFC Daresbury Laboratory) Mr Ninad Pattalwar (STFC Daresbury Laboratory)  
13:30
M2Po2A - Thin Films, Artificial Structures, Flux Pinning - Carlo Ferdeghini (CNR) Judy Wu (University of Kansas) (until 15:30)
13:30 M2Po2A-01 [25]: Microstructural Characterization of Tl-1223 Superconducting Thin Films for the CERN Future Circular Collider (FCC-hh) Beam Screen - Alice Moros (TU Wien)  
13:30 M2Po2A-02 [26]: Superconducting Fibers of Fullerene-based Materials - Dr Hiroyuki Takeya (National Institute for Materials Science )  
13:30 M2Po2A-03 [27]: The issue of induction the superconducting state in selected compressed sulfur and hydrogen systems - Ms Małgorzata Kostrzewa (Institute of Physics, Jan Długosz University in Częstochowa)  
13:30 M2Po2A-04 [28]: Analysis of supercondactivity properties of ${\rm PbH_4(H_2)_2}$ calculated by using an Eliashberg equations - Mrs Kamila Kosk-Joniec (Department of Theoretical Physics, Institute of Physics, Jan Dlugosz University in Czestochowa)  
13:30 M2Po2A-05 [29]: Research on Unconventional Pairing Mechanism at Superconducting LaAlO3/SrTiO3(110) Interface - Prof. Jiacai Nie (Beijing Normal University)  
13:30 M2Po2A-06 [30]: The Effect of Growth Temperature on the Artificial Pinning Center Landscape in BaHfO3 and Y2O3 Doped YBa2Cu3O7-x Thin Films - Dr Mary Ann Sebastian (UDRI & U.S. Air Force Research Laboratory)  
13:30 M2Po2A-07 [31]: The Effect of APC/YBCO Interface on the Angular Range of Effective Pinning by One-Dimensional Artificial Pinning Centers in BaZrO3 /YBa2Cu3O7-xNanocomposite Films - Mr Victor Ogunjimi (University of Kansas)  
13:30 M2Po2A-08 [32]: Effect of layer thickness on structural, morphological and superconducting properties of Nb3Sn films fabricated by multilayer sequential sputtering - Md. Nizam Sayeed (Old Dominion University)  
13:30
M2Po2B - REBCO, Coated Conductor Processing - Danlu Zhang (The Ohio State University) Dongliang Wang (Institute of Electrical Engineering, CAS) (until 15:30)
13:30 M2Po2B-02 [33]: A New Method for Fabrication of Grain-Oriented Functional Materials - Prof. Jun-ichi Shimoyama (Aoyama Gakuin University)  
13:30 M2Po2B-03 [34]: Chemical solution deposition of Y1Ba2Cu3O7-x thin films on SrTiO3 substrates - Mr Jorge Luis Garcia Dulanto (Laboratorio de Cerámicos y Nanomateriales, Facultad de Ciencias Físicas)  
13:30 M2Po2B-04 [35]: Magnetization creep and decay of YBa2Cu3O7-x thin films with columnar Y2BaCuO5 and BaZrO3 pinning center additions - Dr Mary Ann Sebastian (UDRI & U.S. Air Force Research Laboratory)  
13:30 M2Po2B-05 [36]: Flux Pinning Enhancements of Y-Ba-Cu-O Thin Films with Nanosize Magnetic Additions - Timothy Haugan (U.S. Air Force Research Laboratory)  
13:30
M2Po2C - Nb Properties and A15 Conductor - Xingchen Xu (Fermi National Accelerator Lab) Chiara Tarantini (FSU) (until 15:30)
13:30 M2Po2C-01 [37]: Pressure-induced critical current reduction in impregnated Nb3Sn Rutherford cables for use in future accelerator magnets - Herman Ten Kate (CERN)  
13:30 M2Po2C-02 [38]: Improvement of stability of commercial Nb3Sn RRP wires by increasing specific heat - Xingchen Xu (Fermi National Accelerator Lab)  
13:30 M2Po2C-03 [39]: Trial Manufactures of Jelly-Rolled Nb/Al Single Wire with Very Small Diameter below 50 microns - Dr Akihiro Kikuchi (National Institute for Materials Science)  
13:30 M2Po2C-04 [40]: Characterization and Image Analysis to Further the Development of Tube Type Nb3Sn Conductors - Mr Jacob Rochester (The Ohio State University)  
13:30 M2Po2C-05 [41]: RRR Estimation of Niobium using inflection point on the frequency response of a planar inductive sensor - Nagendra H.N. (INDIAN INSTITUTE OF SCIENCE)  
13:30 M2Po2C-06 [42]: RRR Measurements and Tensile Tests of High Purity Ingot Niobium - Zijia Zhao (Tufts University)  
13:30
M2Po2D - HTS Cables - Fabrication and Characterization - Alexander Otto (Solid Material Solutions, LLC) Sonja Schlachter (Karlsruhe Institute of Technology) (until 15:30)
13:30 M2Po2D-01 [43]: The Development of HTS Current Leads for ITER - Pierre Bauer (ITER)  
13:30 M2Po2D-02 [44]: Experimental studies on the contact resistance and current sharing of superconducting CORC cables - Virginia Phifer  
13:30 M2Po2D-03 [45]: Effect of Interfacial Resistance at Superconductor-stabilizer layer on the Temperature distribution among 2G HTS Tape used for Superconducting Power Applications - Abhinav Kumar (Lovely Professional University, Phagwara)  
13:30 M2Po2D-04 [46]: Liquid Nitrogen Cooled Superconducting Power Cable with No Solid Insulation - Mr Aws Al-Taie (Florida State University)  
13:30 M2Po2D-05 [47]: Comparison between measured and calculated ac losses in a CORC wire - Prof. Naoyuki Amemiya (Kyoto University)  
13:30 M2Po2D-06 [48]: Thermal and electrical contact resistance of YBCO tape stacks at 77 K - Shenchen Xue (The Ohio State University)  
13:30
M2Po2E - LTS Cables - Fabrication and Characterization - Karl Hartwig (Texas A&M University) Milan Majoros (The Ohio State University) (until 15:30)
13:30 M2Po2E-01 [49]: Assessment of current-sharing of fully-excited Nb3Sn Rutherford cable with modified ICR at 4.2 K using a superconducting transformer - Chris Kovacs (The Ohio State University)  
13:30 M2Po2E-02 [50]: Direct Measurement of Modified Interconductor Contact Resistance Values in Coated Conductor Stacks and Roebel Cables - Chris Kovacs (The Ohio State University)  
13:30 M2Po2E-03 [51]: Low cost transposed cables for coil windings made with Bi2223 and REBCO HTS tapes - Dr Alexander Otto (Solid Material Solutions, LLC)  
13:30 M2Po2E-04 [52]: Strong round Bi2212 wire and its fabrication into transposed high current cables - Dr Alexander Otto (Solid Material Solutions, LLC)  
13:30 M2Po2E-05 [53]: Numerical modeling of stability and current sharing in Nb3Sn Rutherford cables - Milan Majoros (The Ohio State University)  
13:30 M2Po2E-06 [54]: Suppression of Magnetization and Creep in High-temperature Superconducting Cable by Magnetic Field Cycling - Mike Sumption (The Ohio State University) Cory Myers (Ohio State University) Prof. Ted Collings (MSE, OSU)  
14:30 --- Afternoon Break (during Poster Session) ---
15:30
C2Or2A - Non-Aerospace Stirling and Pulse Tube Cryocoolers - Peter Kittel (Retired) Tian Lei (Sumitomo (SHI) Cryogenics of America Inc.) (until 17:00)
15:30 C2Or2A-01: High power high availability single-stage Stirling coolers - Mr Daniel Willems (Thales Cryogenics BV)  
16:00 C2Or2A-03: FLIR FL-100 Miniature Linear Stirling Cryocooler Development Summary - Dr Ted Conrad (FLIR Systems)  
16:15 C2Or2A-04: Influence of periodic motions on the performance of Stirling pulse tube cryocooler - Tao Fang (Georgia Institute of Technology)  
16:30 C2Or2A-05: Investigation of improving cool-down speed of Stirling type pulse tube cryocooler with ambient displacer - Prof. Wei Dai (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) Prof. Xiaotao Wang (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences) Cungang Yan (Technical Institute of Physics and Chemistry, Chinese Academy of Sciences；University of Chinese Academy of Sciences)  
16:45 C2Or2A-06: Study on the characteristics of the transfer tube in a high capacity Stirling type pulse tube cryocooler - Mr Xijun Tao (Zhejiang University)  
15:30
C2Or2B - Thermal Insulation Systems I - James Tuttle (NASA/GSFC) James Fesmire (NASA Kennedy Space Center ) (until 16:45)
15:30 C2Or2B-01: Preliminary study of HGCAL coaxial CO2 Transfer Lines - Ms Rossi Mendez (Rossi)  
15:45 C2Or2B-02: Testing of SHIIVER MLI Coupons for Heat Load Predictions - Wesley Johnson (NASA Glenn Research Center)  
16:00 C2Or2B-03: Performance of MLI Seams between 293 K and 20 K - Wesley Johnson (NASA Glenn Research Center)  
16:15 C2Or2B-04: Experimental investigation on combination of vapor cooled shield (VCS) and multilayer insulation (MLI) for cryogenic application - Dr Wenbing Jiang (Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University)  
16:30 C2Or2B-05: Thermal insulation system design and cryogenic test for a new independent type B LNG mock up tank - Prof. Yonglin Ju (Shanghai Jiao Tong University)  
15:30
C2Or2C - Aerospace Cryocooler Simulation - Carl Kirkconnell (West Coast Solutions) Mike Meyer (NASA) (until 16:45)
15:30 C2Or2C-01: System analysis of a closed cycle dilution refrigerator for space applications - Dr Gerard Vermeulen (Néel Institute (CNRS))  
15:45 C2Or2C-02: A new type of mixing chamber for a zero gravity dilution refrigerator - Dr Gerard Vermeulen (Neel Institute (CNRS))  
16:00 C2Or2C-03: Numerical Modeling and Improvement of Helium 3 Circulation Compressor of Closed Cycle Dilution Refrigerator for Space - Dr Keisuke Shinozaki (JAXA)  
16:15 C2Or2C-04: Experimental validation and refinement of mixture optimization for mixed gas Joule-Thomson cycle - Jennifer Detlor (Cryogenic Engineering Laboratory)  
16:30 C2Or2C-05: Fluid mechanical response of a pulse tube cryocooler: modelling and experimental validation. - Kévin Lauzier (Air Liquide Advanced Technologies, Université de Lyon, INSA Lyon, CNRS, Ampère, F-38360, Sassenage, France)  
15:30
M2Or3A - Transportation Symposium: Transportation Motors II - Takanobu Kiss (Kyushu University) Matthew Rindfleisch (Hyper Tech Research Inc.) (until 17:00)
15:30 M2Or3A-01 [Invited]: A fully superconducting air-core machine for aircraft propulsion - Thanatheepan Balachandran (University of Illinois at Urbana Chamapign) Kiruba Haran (University of Illinois)  
16:00 M2Or3A-02 [Invited]: AC Loss of Superconducting Materials- refined loss estimates for very high density motors and generators for hybrid-electric aircraft: MgB2 wires, Coated conductor tapes and wires - Mike Sumption (The Ohio State University)  
16:30 M2Or3A-03 [Invited]: Cost, weight, and AC Loss Minimization, for a Fully Superconducting 6.5 MVA Traction Transformer for High Speed Rail - Dr Rod Badcock (Robinson Research Institute, Victoria University of Wellington) Dr Zhenan Jiang (Robinson Research Institute, Victoria University of Wellington)  
15:30
M2Or3B - Focus Series B: REBCO Flux Pinning III, High Fields - Hiroaki Kumakura (National Institute for Materials Science) Boris Maiorov (Los Alamos National Laboratory) (until 17:00)
15:30 M2Or3B-01 [Invited]: Flux Pinning by BHO Nanoparticles under Various Strength and Orientations of Magnetic Fields in REBCO Coated Conductors Fabricated by UTOC-TFA-MOD Method - Dr Tatsunori Okada (Tohoku University)  
16:00 M2Or3B-02 [Invited]: Vortex pinning landscape by ion irradiation for REBCO thin films - Toshinori Ozaki (Kwansei Gakuin University)  
16:30 M2Or3B-03 [Invited]: Advanced CSD-grown REBCO nanocomposites for high-field applications - Dr Manuela Erbe (Karlsruhe Institute of Technology (KIT))  
15:30
M2Or3C - Focus Series C: Superconducting RF Cavity Materials I - Pashupati Dhakal (SRF R&D Jefferson Lab) Lance Cooley (ASC/NHMFL - Florida State University) (until 17:00)
15:30 M2Or3C-01 [Invited]: Connecting Cavity Performance to Physics of the Surface - Dr Martina Martinello (Fermilab)  
16:00 M2Or3C-02: Analysis of recrystallization and grain growth behavior in heavily deformed reactor grade (Grade 1) and RRR grade Niobium for SRF and superconducting wire applications - Dr Karl Hartwig (Texas A&M University)  
16:15 M2Or3C-03: First-principles study of magnetic flux trapping behavior at lattice defects in niobium - Mr Pulkit Garg (Arizona State University)  
16:30 M2Or3C-04: Niobium tube fabrication using tube equal channel angular extrusion - Mr Abhinav Srivastava (Texas A&M University)  
16:45 M2Or3C-05: Evidence that bi-modal grain size leads to variations in flux trapping in polycrystalline Nb - Dr Shreyas Balachandran (National High Field Magnet Laboratory)  
17:15
C2Or3A - An Evolution of Cryogenic Engineering -- Special Session dedicated to Glen McIntosh - John Pfotenhauer (Adviser, second author) Jacob Leachman (Washington State University) (until 18:45)
17:15
M2Or4A - Transportation Symposium: Transportation Motors III: with Cryo - Jason Hartwig (NASA / GRC) Mike Sumption (The Ohio State University) (until 18:45)
17:15 M2Or4A-01 [Invited]: Bulk Superconductors for Motors – Practical Materials Challenges - Dr John Durrell (University of Cambridge)  
17:45 M2Or4A-02 [Invited]: Homopolar Superconducting AC Machines, with HTS Dynamo Driven Field Coils, for Aerospace Applications - Swarn Kalsi (Retired)  
18:15 M2Or4A-03 [Invited]: Coolant Transfer Coupling for a Rotor Carrying HTS Windings - Swarn Kalsi (Retired)  
17:15
M2Or4B - Focus Series B: REBCO Flux Pinning IV, High Fields - Manuela Erbe (Karlsruhe Institute of Technology (KIT)) Leonardo Civale (Los Alamos National Laboratory) (until 18:45)
17:15 M2Or4B-01 [Invited]: Thick Film REBCO Tapes with High Critical Currents in High Magnetic Fields - Venkat Selvamanickam (University of Houston)  
17:45 M2Or4B-02 [Invited]: Novel dynamics and critical currents in fast superconducting vortices at high pulsed magnetic fields - Dr Boris Maiorov (Los Alamos National Laboratory)  
18:15 M2Or4B-03 [Invited]: Critical currents of modern ReBCO conductors in high magnetic fields up to 45T - Dr Dmytro Abraimov (National High Magnetic Field Laboratory )  
17:15
M2Or4C - Focus Series C: Superconducting RF Cavity Materials II - Shreyas Balachandran (National High Field Magnet Laboratory) Martina Martinello (Fermilab - IIT) (until 19:00)
17:15 M2Or4C-01 [Invited]: SRF materials: Current understanding and future directions - Pashupati Dhakal (Jefferson Lab)  
17:45 M2Or4C-02: Models of the Thermal Conductivity of Superconducting Nb - Prof. Neil Wright (Mechanical Engineering, Michigan State University)  
18:00 M2Or4C-03: Multiscale Mdelling of Niobium Sheets to Account for Anisotropic Evolution of Yield Surface and Plastic Potential - Prof. Farhang Pourboghrat (The Ohio State University)  
18:15 M2Or4C-04: Additive Manufacturing of Nb cavities for quantum computing - Michael Sumption (for ICMC)  
18:30 M2Or4C-05: Microwave Microscopy of Materials Limitations of Superconducting RF Cavities - Bakhrom Oripov (University of Maryland)  
18:45 M2Or4C-06: Additive Manufacturing of High Purity Niobium and Copper for SRF and NCRF Applications - Mr Christopher Ledford (North Carolina State University)  
12:30 --- Lunch (on your own) ---
14:00
C3Or2A - Superconducting Magnet Systems III - Tengming Shen (Lawrence Berkeley National Lab) Luisa Chiesa (Tufts University) (until 15:45)
14:00 C3Or2A-01: Supercritical Helium Expansivity Effects on Magnet Protection Systems - Dr Mark Vanderlaan (National High Magnetic Field Lab)  
14:15 C3Or2A-02: Application of AC Loss on Insulated REBCO Coil using Frequency Loss Induced Quench (FLIQ) Protection System. - Kikelomo Ijagbemi (National High Magnetic Field Laboratory)  
14:30 C3Or2A-03: Thermal analysis, cool down - and cryo-operational strategies for the Baby-IAXO magnet - Herman Ten Kate (CERN)  
14:45 C3Or2A-04 (Robert Duckworth) - Presentation Withdrawn  
15:00 C3Or2A-05: 50-100kW HTS motor demonstrator design and manufacturing for hybrid-electric propulsion - Julien Tanchon (AFCryo)  
15:15 C3Or2A-06: Rotor Cooling Concept for the Asumed superconductive Motor - Mrs Rossi Mendez  
15:30 C3Or2A-07: Design of re-condensing cryostats for long term use in magnet beamline applications - Mr Neil Clarke (Oxford Instruments Nanoscience)  
14:00
C3Or2B - Thermal-Fluid Transport and Properties for Fluids Boiling Above 50 K - Ian Richardson (Washington State University) Jacob Leachman (Washington State University) (until 16:00)
14:00 C3Or2B-01 [Invited]: Impact characteristics of liquid nitrogen droplets - Dr Srinivas Vanapalli (University of Twente)  
14:30 C3Or2B-02: Simulation of a cryogenic capillary tube: thermodynamic behavior subjected to heat load. - Maria Barba (CEA (Commissariat à l'Énergie Atomique))  
14:45 C3Or2B-03: Why do low conductive coatings increase the cooling speed of metals quenched in liquid nitrogen? - Mr Sahil Jagga (University of Twente)  
15:00 C3Or2B-04: Experimental Study on the Pool Boiling Heat Transfer of Slush Nitrogen - Prof. Tao Jin (Zhejiang University)  
15:15 C3Or2B-05: Commissioning of the cryogenic phase equilibria test stand CryoPHAEQTS - Mr Jens Tamson (Institute of Technical Thermodynamics and Refrigeration, Karlsruhe Institute of Technology (KIT))  
15:30 C3Or2B-06: Two-phase flow patterns for zeotropic mixtures of tetrafluoromethane/ethane in a horizontal smooth tube - Dr Qinglu Song (Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China)  
15:45 C3Or2B-07: Research on measurement technique of phase distribution and void fraction for cryogenic two-phase flow based on capacitance - Mr Huangjun Xie (Institute of Refrigeration and Cryogenics, Zhejiang University)  
14:00
C3Or2C - Compressor Expanders and Other Components - Mark Zagarola (Creare LLC) Xilong Wang (European Spallation Source ERIC ) (until 15:45)
14:00 C3Or2C-01: Implications and Methodology of Retrofits in Cryogenic Plants - Mr Oliver Amstutz (Linde Kryotechnik AG)  
14:15 C3Or2C-02: Cryogenic Performance Test Platform for the Gas Bearings of Helium Turbine Expanders - Ms Shanshan Li (Institute of Plasma Physics Chinese Academy of Sciences)  
14:30 C3Or2C-03: Analysis of temperature field and its total leakage of heat flow for cold compressor - Prof. Jihao Wu (1.Technical Institute of Physics and Chemistry Chinese Academy of Sciences. 2.University of Chinese Academy of Sciences)  
14:45 C3Or2C-04: Development of a High-Effectiveness Slotted Plate Cryogenic Heat Exchanger - Prof. John Pfotenhauer (Adviser, second author)  
15:00 C3Or2C-05: Experimental performance of a Catalyzed Vortex Tube with Cryogenic Hydrogen - Mr Carl Bunge (HYdrogen Properties for Energy Research (HYPER) Laboratory, Washington State University)  
15:15 C3Or2C-06: A two-condenser pulsating heat pipe for use as a passive thermal disconnect in redundant cryocooler implementations - Franklin Miller (University of Wisconsin - Madison) Bryant Mueller (University of Wisconsin - Madison)  
15:30 C3Or2C-07: Development of a Cryogenic Compressor for Airborne Cryocoolers - Mr Kenneth Cragin (Creare LLC)  
14:00
M3Or3A - Transportation Symposium: Transportation Cables - Arend Nijhuis (University of Twente) Lukas Graber (Georgia Institute of Technology) (until 16:00)
14:00 M3Or3A-01 [Invited]: HTS Cable for Power Distribution in Hybrid-Electric Propulsion System for Aircraft - Sonja Schlachter (Karlsruhe Institute of Technology)  
14:30 M3Or3A-02 [Invited]: High Power Density HTS Cables for Electric Transportation Applications - Sastry Pamidi (FAMU-FSU College of Engineering)  
15:00 M3Or3A-03 [Invited]: Development of CORC® power transmission and fault current limiting cable systems - Jeremy Weiss (Advanced Conductor Technologies)  
15:30 M3Or3A-04 [Invited]: Process for scalable fabrication of low AC loss HTS conductors - Joseph Prestigiacomo (US Naval Research Laboratory)  
14:00
M3Or3B - MgB2 and Fe-based Wires - Eric Hellstrom (Applied Superconductivity Center, National High Magnetic Field Laboratory, Florida State University) Matthew Rindfleisch (Hyper tech Research) (until 16:00)
14:00 M3Or3B-01: Development of MgB2 superconductor wire and magnets for DC and AC applications - Xuan Peng (Hyper Tech Research Inc.)  
14:15 M3Or3B-02: Effect of swaging on the microstructure and critical currents of single- and 7-filament powder-in-tube MgB2 wires - Dr Hiroaki Kumakura (National Institute for Materials Science)  
14:30 M3Or3B-03: Microstructure and Enhanced Engineering Critical Current Density of Advanced-Internal-Magnesium-Infiltration (AIMI) MgB2 Wires with Low Heating Temperature and Long Heating Time. - Fang Wan (The Ohio State University)  
14:45 M3Or3B-04: Improvement of Upper Critical Field and Irreversible Field in MgB2 Wires and Bulks by Fiber Strain Engineering Method and REO Additions - Ms Danlu Zhang (The Ohio State University)  
15:00 M3Or3B-05: DC Performance Testing of MgB2 Samples using Cryocooler-Based Cooling - Dr Jason Hartwig (NASA Glenn)  
15:15 M3Or3B-06: Fe(Se,Te) coated conductors deposited on simple metallic templates - Carlo Ferdeghini (CNR-SPIN)  
15:30 M3Or3B-07: Recent progress of 122-type iron-based superconducting wires and tapes - Xianping Zhang (Institute of Electrical Engineering, Chinese Academy of Science)  
15:45 M3Or3B-08: Development of iron-based superconducting joints - Dongliang Wang (Institute of Electrical Engineering, CAS)  
14:00
M3Or3C - Focus Series D: Quantum Computing II - Long Nguyen (University of Maryland, College Park) Joseph Bardin (University of Massachusetts Amherst) (until 16:00)
14:00 M3Or3C-01 [Invited]: Correlation of Lifetime Fluctuations in Superconducting Qubits - Dario Rosenstock (University of Massachusetts, Amherst)  
14:30 M3Or3C-02 [Invited]: Engineering nonlinear dissipation across two superconducting cavity modes - Juliang Li (Physics, UMass Amherst)  
15:00 M3Or3C-03 [Invited]: Development of \pi-periodic Josephson Elements for Charge-Parity Qubits - Yebin Liu (Syracuse University)  
15:30 M3Or3C-04 [Invited]: Superconducting Qubit Control with Single Flux Quantum Pulses in A Multichip Module - Andrew Ballard (Syracuse University)  
14:00
M3Or3D - Cryogenic Materials Database Workshop - Dick Reed (Cryogenic Materials, Inc.) Robert Walsh (Florida State University) Karl Hartwig (Texas A&M University) (until 17:00)
16:15
M3Or4A - Joint CEC and ICMC Session: Transportation Overview - Wesley Johnson (Cryogenic Research Engineer, Cryogenic and Fluids Branch (LTF)) (until 18:20)
16:15 M3Or4A-01 [Invited]: Enabling Aircraft Distributed Electric Propulsion through Cryogenic Hydrogen Energy: Research of the Center for Cryogenic High-Efficiency Electrical Technologies for Aircraft (CHEETA) - Phillip Ansell (Univeristy of Illinois at Urbana-Champaign)  
16:40 M3Or4A-02 [Invited]: Hydrogen Applications for Space Transportation - Mike Meyer (NASA)  
17:05 M3Or4A-03 [Invited]: Large Scale Hydrogen Modeling Efforts and Lessons Learned - Mr Daniel Hauser (NASA Glenn Research Center)  
17:30 M3Or4A-04 [Invited]: Development of fully turbo-electric propulsion systems for aircrafts - Masataka Iwakuma (Kyushu University)  
17:55 M3Or4A-05 [Invited]: Update on Aircraft Electric Propulsion and Impact of Superconducting and Cryogenic Technology - Timothy Haugan (U.S. Air Force Research Laboratory)  
16:15
M3Or4B - Focus Series D - Joint CEC and ICMC Session: Quantum Computing Overview - Kin Chung Fong (Raytheon BBN Technologies) Chen Wang (University of Massachusetts, Amherst) (until 18:15)
16:15 M3Or4B-01 [Invited]: Progress and Challenges for Engineering Superconducting Qubits - Prof. William Oliver (MIT)  
16:45 M3Or4B-02 [Invited]: Sub-Kelvin cooling systems for quantum computers - Dr Amir Jahromi (NASA-GSFC)  
17:15 M3Or4B-03 [Invited]: Superconducting Cavities for Modular Quantum Information Processing - Luke Burkhart (Yale University)  
17:45 M3Or4B-04 [Invited]: Cryogenic Integrated Circuits for Quantum Computing - Joseph Bardin (University of Massachusetts Amherst)  
19:00 --- Banquet Event ---