CLIC08 Workshop
→
Europe/Zurich
500/1-001 - Main Auditorium (CERN)
Hans Braun
(CERN)
Description
CLIC'08 is an Accelerator and Physics Workshop which follows the very successful 1st Workshop of this kind held at CERN in Oct 2007.
The Aims of CLIC08 are:
- Review the R&D towards CLIC Feasibility Demonstration and Conceptual Design Report in 2010. This includes Items of ILC-CLIC Common Interest as defined in the recently established ILC-CLIC Collaboration.
- Identify the R&D, Facilities and Engineering Efforts needed in the period after 2010 to progress from a Conceptual Design to a Technical Design.
- Address Particle Physics and Detector Issues of a Multi-TeV Linear Collider.
Participants
218
View full list
-
-
Participants are requested to register from 11:00 till 11:45 in main bldg, 1st floor, in order to receive CERN badges and other relevant information regarding the Workshop
-
- 14
- 15
-
16
Main & Drive Beam Dynamics¶Speakers: Caterina Biscari (Istituto Nazionale Fisica Nucleare (INFN)), Daniel Schulte (CERN)
-
17
Instrumentation¶Speakers: Grahame Blair (Royal Holloway, Univ. of London), Thibaut Lefevre (CERN)
- 18
-
19
Technical Issues, Integration & Cost¶Speakers: Dr Germana Riddone (CERN), Roger Ruber (Uppsala Univ)
- 20
-
21
Beam Delivery System & Machine Detector Interface¶Speakers: Andrei Seryi (SLAC), Rogelio Tomas (CERN)
-
19:00
Workshop Cocktail the Globe of Science and Innovation
the Globe of Science and Innovation
CERN
-
-
-
Common Session (Instrumentation) (Main & Drive Beam Dynamics) (RF Structures & Sources)¶ 503/1-001 - Council Chamber
-
22
Beam Dynamics Requirement for RF and Instrumentation: Main Linac Beam Dynamics¶Speaker: Daniel Schulte (CERN)
-
23
Discussion¶
-
24
Beam Dynamics Requirement for RF and Instrumentation: Drive Beam Dynamics¶Speaker: Erik Adli (European Organization for Nuclear Research (CERN))
-
25
Discussion¶
-
26
Beam Dynamics Requirement for RF and Instrumentation: Phase Stability Requirements¶Speaker: Daniel Schulte (CERN)
-
27
Discussion¶
-
10:00
Coffee break
-
22
-
-
- 34
- 35
- 36
- 37
- 38
-
10:40
break
- 39
- 40
-
41
CLIC00 detector concept¶Speakers: Christian Grefe, Peter Speckmayer (Technische Universitaet Wien)
- 42
-
12:40
Lunch break
- 43
- 44
- 45
-
15:30
coffee break
- 46
- 47
- 48
-
- 49
-
50
Discussion¶
- 51
-
52
Discussion¶
- 53
-
54
Discussion¶
-
10:10
Coffee break
-
55
Collective Effects in the Transfer Lines and Damping rings¶Speaker: Giovanni Rumolo (CERN)
-
56
Discussion¶
-
57
An Hybrid Positron Sources for CLIC¶Speaker: Dr Robert Chehab (INSTITUT DE PHYSIQUE NUCLEAIRE DE LYON-IN2P3/CNRS (France))
-
58
Discussion¶
- 59
-
60
Discussion¶
- 61
-
62
Discussion¶
-
12:30
Lunch break
- 63
-
64
Discussion¶
-
65
Undulator Option for Polarized e+¶Speakers: Ian Bailey (Cockcroft Institute), Lei Zang (Cockcroft Institute)
-
66
Discussion¶
- 67
-
68
Discussion¶
-
15:30
Coffee break
-
69
CLIC Damping Rings Overview¶Speaker: Yannis Papaphilippou (CERN)
-
70
Discussion¶
- 71
-
72
Discussion¶
- 73
-
74
Discussion¶
-
75
General Discussion¶
-
-
- 94
- 95
-
96
Discussion¶
-
97
Requirements for Main Linac Magnets¶Speakers: Daniel Schulte (CERN), Roger Ruber (University of Uppsala)
-
98
Preliminary design of a quadrupole for the stabilization bench¶Speaker: Mr Thomas Zickler (CERN)
-
99
Discussion¶
- 100
-
101
Discussion¶
-
10:05
Coffee break
- 102
-
103
Discussion¶
-
104
Test Module in the Two Beam Test Stand¶Speakers: Jouni Juhani Huopana (Helsinki Institute of Physics (HIP)-Univ. of Helsinki, Fac. of S), Nasir Abbas (National Centre for Physics (NCP)-Quaid-E-Azam University-Unknow)
-
105
Discussion¶
- 106
-
107
Discussion¶
-
12:00
Lunch break
- 108
-
109
Discussion¶
- 110
-
111
Discussion¶
- 112
-
113
Discussion¶
- 114
-
115
Discussion¶
- 116
-
117
Discussion¶
-
16:00
Coffee break
- 118
-
119
Discussion¶
- 120
-
121
Discussion¶
- 122
-
123
Discussion¶
- 124
-
125
Discussion¶
- 126
-
- 127
-
128
Discussion¶
- 129
-
130
Discussion¶
- 131
-
132
Discussion¶
-
10:00
Coffee break
-
133
CTF3 Commissioning and Operation¶Speaker: Piotr Krzysztof Skowronski (Warsaw University of Technology)
-
134
Discussion¶
-
135
Modeling, Tools and Beam procedures in CTF3¶Speaker: Simona Bettoni (Universita degli Studi di Milano)
-
136
Discussion¶
- 137
-
138
Discussion¶
- 139
-
140
General Discussion¶
-
12:30
Lunch break
-
-
- 163
-
164
Discussion¶
-
165
Coherent Diffraction study at CTF3¶Speaker: Maximilian Micheler (Royal Holloway College-University of London-Unknown)
-
166
Discussion¶
- 167
-
168
Discussion¶
-
15:30
Coffee break
- 169
-
170
Discussion¶
- 171
-
172
Discussion¶
-
173
Status on the construction of BPS at CTF3¶Speaker: Angeles Faus-Golfe (Instituto de Fisica Corpuscular (IFIC) UV-CSIC)
-
174
Discussion¶
- 175
-
176
Discussion¶
-
-
-
-
-
Common Session (Injectors & Damping Rings) (Instrumentation) (Linear Colliders Test Facilities)¶ 60/6-002
-
Common Session (Main & Drive Beam Dynamics) (Technical Issues, Integration & Cost)¶ 40-S2-C01
40-S2-C01
CERN
-
- 206
-
207
Discussion¶
-
208
Breakdown & Pulsed Surface Heating Studies: Surface + Integrated Simulation¶Speaker: Helga Timko
-
209
Discussion¶
-
210
Breakdown & Pulsed Surface Heating Studies: On the pulse shape dependence of the rf breakdown rate in accelerating structures¶Speaker: Alexej Grudiev (CERN)
-
211
Discussion¶
-
212
From Natural Mutation to DC Breakdown¶Speaker: Yngve Inntjore Levinsen (Norges Teknisk-Naturvitens. Univ. (NTNU))
-
213
Discussion¶
-
10:15
Coffee break
-
Common Session (Beam Delivery System & Machine Detector Interface) (Physics & Detectors)¶ 40-S2-D01
40-S2-D01
CERN
-
Common Session (RF Structures & Sources) (Linear Collider Test Facilities)¶ 503/1-001 - Council Chamber
- 222
-
223
Discussion¶
- 224
-
225
Discussion¶
-
226
High-Power RF Test Areas: Introduction to the CERN Klystron Test Area¶Speaker: Karl-Martin Schirm (CERN)
-
227
Discussion¶
-
228
High-Power RF Test Areas: Design & Planning Progress of the CERN Klystron Test Area¶Speaker: Mr Franck Peauger (CEA / DAPNIA / SACM)
-
229
Discussion¶
-
230
High-Power RF Test Areas: TBTS Status¶Speakers: Igor SYRATCHEV (CERN), Roger Ruber (Uppsala Univ)
-
231
Discussion¶
-
12:35
Lunch break
-
- 232
-
233
Discussion¶
- 234
-
235
Discussion¶
-
236
Analytical Considerations for Minimum Emittance Lattices - Application to the CLIC pre-Damping Rings¶Speaker: Fanouria Antoniou
-
237
Discussion¶
- 238
-
239
Discussion¶
-
12:30
Lunch break
-
240
CLIC DR lattice optimized for low emittance and high SR power evacuation¶Speaker: Konstantin Zolotarev (BINP)
-
241
Discussion¶
- 242
-
243
Discussion¶
- 244
-
245
Discussion¶
-
15:30
Coffee break
- 246
-
247
Discussion¶
- 248
-
249
Discussion¶
- 250
-
251
Discussion¶
- 252
-
-
- 261
-
262
Discussion¶
-
263
Main beam quadrupole support¶Speaker: Friedrich Lackner (CERN)
-
264
Discussion¶
-
265
Module supporting system¶Speaker: Risto Juhani Nousiainen (Helsinki Institute of Physics (HIP) - Univ. of Helsinki, Fac. of)
-
266
Discussion¶
-
267
Progress on Study of Module Cooling¶Speaker: Risto Juhani Nousiainen (Helsinki Institute of Physics (HIP) - Univ. of Helsinki, Fac. of)
-
268
Discussion¶
-
269
Vacuum Requirementss and Preliminary Design of Vacuum System for Module & Transfer Lines¶Speaker: Cedric Garion (CERN)
-
270
Discussion¶
-
12:40
Lunch break
- 271
-
272
Discussion¶
- 273
-
274
Discussion¶
- 275
-
276
Discussion¶
-
15:30
Coffee break
- 277
-
278
Discussion¶
- 279
-
280
Discussion¶
-
281
Working Group Conclusions¶
-
- 282
-
283
Discussion¶
- 284
-
285
Discussion¶
- 286
-
287
Discussion¶
-
288
ILC CLIC collaboration¶Topic: Beam Dynamics (CLIC) Date: Thursday, October 16, 2008 Time: 3:30 pm, Japan Standard Time (GMT +09:00, Tokyo) Meeting Number: 592 212 692 Meeting Password: clicbd Please click the link below to see more information, or to join the meeting. ------------------------------------------------------- To join the online meeting ------------------------------------------------------- 1. Go to https://fnal.webex.com/fnal/j.php?ED=109510442&UID=0 PW=df133dcc90100803505649 2. Enter your name and email address. 3. Enter the meeting password: clicbd 4. Click "Join Now".
-
12:30
Lunch break
-
-
289
Speaker: Mr Franck Peauger (CEA / DAPNIA / SACM)
-
290
-
291
Speaker: Igor SYRATCHEV (CERN)
-
292
-
293
Speaker: Manfred Wendt (manfred@fnal.gov)
-
294
-
15:30
Coffee break 503/1-001 - Council Chamber (CERN)
-
289
-
Common Session (Main & Drive Beam Dynamics) (Linear Collider Test Facilities) (Beam Delivery System & Machine Detector Interface)¶ 60/6-002
- 295
-
296
Alignment studies: Decelerator and CTF3¶Speaker: Erik Adli (European Organization for Nuclear Research (CERN))
-
297
CLIC BDS alignment and FFS tuning also for ATF2 ultra-low betas¶Speaker: Rogelio Tomas (CERN)
-
298
The ATF2 final doublet system¶Speaker: Andrea Jeremie (Laboratoire d'Annecy-le-Vieux de Physique des Particules (LAPP))
-
299
Discussion¶
-
15:30
Coffee break
-
- 300
- 301
- 302
-
15:25
coffee break
- 303
- 304
- 305
-
-
307
Breakdown & Pulsed Surface Heating Studies: Diagnostics for Breakdown Experiments¶Speaker: Jan Kovermann (III. Physikalisches Institut (B) - Rheinisch-Westfaelische Tech.)
-
308
Discussion¶
-
309
Breakdown & Pulsed Surface Heating Studies: DC Spark Test Result¶Speaker: Antoine Descoeudres (Unknown)
-
310
Discussion¶
-
311
Breakdown & Pulsed Surface Heating Studies: Pulsed Heating Test Results¶Speaker: Dr Lisa Laurent (SLAC)
-
312
Discussion¶
-
313
Breakdown & Pulsed Surface Heating Studies: Thermal Fatigue behavior versus Grain Orientation¶Speaker: Markus Aicheler (Ruhr-Universitaet Bochum)
-
314
Discussion¶
-
315
Breakdown & Pulsed Surface Heating Studies: Recent Results of JINR-IAP Experiment on RF Cavity Heating¶Speaker: Dr Sergey Sedykh (Joint Institute for Nuclear Research)
-
316
Discussion¶
-
307
-
webex access information
-
- 324
-
325
Beam dump design progress for ILC, and thougths on CLIC application¶Part I -- heat and radiation in the water and the shielding with results from Fluka and Computational Fluid DynamicsSpeakers: Raymond Arnold (SLAC), Satyamurthy Polepalle (BARC)
-
326
Beam dump design progress for ILC, and thougths on CLIC application¶Part II -- windows, flanges, and beam dump tank mechanical design.Speakers: Dieter Walz (SLAC), John Amann (SLAC)
-
-
19:00
Workshop Dinner Restaurant 1
Restaurant 1
CERN
-
-
-
- 333
- 334
-
335
Main & Drive Beam Dynamics Wkg¶Speakers: Caterina Biscari (Istituto Nazionale Fisica Nucleare (INFN)), Daniel Schulte (CERN)
-
336
Instrumentation Wkg¶Speakers: Grahame Blair (Royal Holloway, Univ. of London), Thibaut Lefevre (CERN)
-
337
RF Structures & Sources Wkg¶Speakers: Chris Adolphsen (SLAC), Dr Walter Wuensch (CERN)
-
10:10
Coffee break
-
338
Technical Issues, Integration & Cost Wkg¶Speakers: Dr Germana Riddone (CERN), Roger Ruber (Uppsala Univ)
-
339
Linear Collider Test Facilities Wkg¶Speakers: Roberto Corsini (CERN), Toshiaki Tauchi (KEK)
-
340
Beam Delivery System & Machine Detector Interface Wkg¶Speakers: Andrei Seryi (SLAC), Rogelio Tomas (CERN)
- 341
-