EUCAS 2017

17 Sept 2017, 08:00 → 21 Sept 2017, 22:00 Europe/Zurich

CICG (Geneva)

WELCOME TO GENEVA!

Welcome to the 13th biennial European Conference on Applied Superconductivity, EUCAS 2017, organized under the auspices of ESAS, the European Society for Applied Superconductivity.

17th – 21st September 2017

EUCAS 2017 will be held 17-21 September 2017 in the International Conference Centre of Geneva (CICG), hosted by CERN in collaboration with the University of Geneva and EPFL-SPC.

EUCAS is a worldwide forum for scientists and engineers, and provides an ideal platform to share knowledge and the most recent advances in all areas of applied superconductivity: from large-scale applications to miniature electronics devices, with a traditional focus on advanced materials and conductors. The broad scope is at the same time a challenge and an opportunity to foster novel, inter-disciplinary approaches and promote cross-fertilization among the various fields of applied superconductivity.

The Scientific Program Committee has taken up this challenge, and is devising a diverse and exciting program. In line with the tradition of conferences on applied superconductivity, and following the successful experience of EUCAS 2015 in Lyon, all papers presented at the conference are eligible for submission to a peer-reviewed special issue of IEEE Transaction on Applied Superconductivity.

We plan to complement the scientific program with an evening outreach event, whose highlight will be the public address of Fabiola Gianotti, CERN Director General.

The conference will be closed by an event of unique flavor, punctuated by historical landmarks of superconducting technology for accelerators that will take place in the large CERN Superconducting Magnet Test Facility complex, following a visit to some of the most significant CERN installations.

Geneva, located at the foot of the Alps and the Jura, on the banks of Lake Leman, at the border of Switzerland and France, has a long history of diversity and tolerance. It is the well-known seat of several International Organizations (among others the European headquarters of UN, WHO, WTO, UNHCR, ICRC, and CERN). But Geneva is also a unique city of culture, and the perfect home base for exploring wonderful surroundings in Switzerland and France (the Mont Blanc alpine slopes are less than an hour’s drive away). Participants to EUCAS 2017 will be able to find a wide range of hotels suitable for each need.

On behalf of the Local Organizers, the Program Committee, and the many volunteers who are helping to arrange for a world-class conference, we welcome you to Geneva in September 2017.

 

Sunday 17 September ¶

08:30 → 17:00 Short Courses¶

08:30 Design of Superconducting magnets for particle accelerators and detectors¶

Design of Superconducting magnets for particle accelerators and detectors

08:30 High Temperature Superconductors: the path from the materials to the technical conductors¶

High Temperature Superconductors: the path from the materials to the technical conductors

08:30 RF Superconducting Cavities¶

RF Superconducting Cavities

08:30 Superconducting electronics - from Josephson effects to quantum computing¶

Superconducting electronics - from Josephson effects to quantum computing

08:30 Superconducting Power Devices¶

Superconducting Power Devices

14:00 → 18:00 Registration¶

15:00 → 17:30 ESAS Board¶

18:00 → 20:00 Welcome reception CICG¶

Exhibition Area

Monday 18 September ¶

08:00 → 08:30 Welcome Address and Awards¶

Awards_1.pdf

Awards_2.pdf

Awards_3.pdf

08:30 → 08:50 ESAS Award & Talk¶

08:30 ESAS Award and Talk¶

Speaker: Ronny Stolz (Leibniz)

DeBeers_ExplorationTechniques_v10_20161205_2secshold.mp4

EUCAS2017_Stolz_v3.pdf

09:00 → 09:50 1P1 - Plenary 1¶

09:00 1P1-01 - Charge Density Waves in underdoped High-Tc materials¶

Speaker: Ted Forgan (University of Birmingham)

1P1-01_Ted Forgan_Room 1.pdf

09:50 → 10:15 Coffee Break

10:15 → 12:15 1E01¶

10:15 1EO1-01 Transport and noise properties of YBCO nanowire based nanoSQUIDs¶

Speaker: Thilo Bauch (Chalmers University of Technology)

1EO1-01_Thilo Bauch_Room 3+4.pdf

10:45 1EO1-02 3D nanoSQUID with an energy sensitivity of 1 h at 4.2 K¶

Speaker: Carmine Granata (National Research Council, Institute of Applied Sciences and Intelligent Systems)

1EO1-02 Granata Room 3+4.pdf

11:00 1EO1-03 SQUIDs with sub-micron Josephson junctions for ultra-low-field magnetic resonance imaging¶

Speaker: Juho Luomahaara (VTT Technical Research Centre of Finland)

1EO1-03_Juho Luomahaara_Room 3+4.pdf

11:15 1EO1-04 Large High-Temperature Superconducting 2D SQIF arrays¶

Speaker: Shane T Keenan (CSIRO)

11:30 1EO1-05 Scanning SQUID Microscopy for Sensing Vector Magnetic Field¶

Speaker: The Dang Vu (Department of Physics and electronics, Osaka Prefecture University)

1EO1-05_The Dang Vu_Room 3+4.pdf

11:45 1EO1-06 Flip-chip high-Tc DC SQUID magnetometer with a ferromagnetic flux antenna¶

Speaker: Michael Faley (Peter Grünberg Institute,)

1EO1-06_Michael Faley_Room 3+4_update.pdf

12:00 1EO1-07 Phase sensitive imaging of the currents in planar superconductive resonator¶

Speaker: Alexandre Karpov (National University of Science and Technology (MISIS))

10:15 → 12:15 1LO1 - FCL / SMEs¶

10:15 1LO1-01 Siemens’ first MV SFCL installed in a public grid – aspects from design to operation and operational experience¶

Speaker: Tabea Arndt (Siemens AG)

10:45 1LO1-02 Resistive superconducting fault current limiter for 220 kV Moscow grid¶

Speaker: Moyzykh Mikhail (S-Innovations)

1LO1-02_Mikhail Moyzykh_Room 1.pdf

11:00 1LO1-03 SmartCoil –Shielded Core Reactor for Current Limitation on the Distribution Level¶

Speaker: Kudymow Andrej (Karlsruhe Institute of Technology)

1LO1-03_Andrej Kudymow_Room 1.pdf

11:15 1LO1-05 The DRYSMES4GRID project: development of a cryogen free cooled SMES demonstrator based on MgB2¶

Speaker: Antonio Morandi (University of Bologna - DEI)

1LO1-05_Antonio Morandi_Room 1.pdf

11:30 1LO1-06 Development of round flexible HTS CORC® wires for fault current limiting applications¶

Speaker: Jeremy Weiss (Advanced Conductor Technologies)

1LO1-06_Jeremy Weiss_Room 1.pdf

11:45 1LO1-07 A new EC project: FASTGRID¶

Speaker: Pascal Tixador (Grenoble-INP)

1LO1-07_Pascal Tixador_Room 1.pdf

12:00 1LO1-¶

10:15 → 12:15 1MO1¶

10:15 1MO1-01 Universal Lower Limit on Vortex Creep in Superconductors¶

Speaker: Serena Eley (Serena Eley)

1MO1-01_Serena Eley_Room_2.pdf

10:45 1MO1-02 Self-field critical currents of practical superconductors¶

Speaker: Evegny Talantsev (Robinson Research Institure, Victoria University of Wellington)

1MO1-02_Evgeny Talantsev_Room 2_update.pdf

11:00 1MO1-03 Micro-straining tuning for strong and isotropic artificial pinning centers in YBCO films¶

Speaker: Judy Wu (University of Kansas)

1MO1-03_Judy Wu_Room 2.pdf

11:15 1MO1-04 Progress towards YBa2Cu3O7-δ nanocomposite thin films using chemical solution deposition and preformed nanocrystals¶

Speaker: Katrien De Keukeleere (Ghent University)

1MO1-04_Katrien De Keukeleere_Room 2.pdf

11:30 1MO1-05 High-field Jc properties of MOD-(Y,Gd)Ba2Cu3Oy coated conductors with BaHfO3 nanoparticles¶

Speaker: Tatsunori Okada (High Field Laboratory for Superconducting Materials, IMR, Tohoku University)

1MO1-05_Tatsunori Okada_Room 2.pdf

11:45 1MO1-06 The challenging pinning landscape of YBa2Cu3O7 thin films¶

Speaker: Bernart Mundet (Institut de Ciència de Materials de Barcelona)

1MO1-06_Bernat Mundet_Room 2.pdf

12:00 1MO1-07 High field superconducting characteristics at low temperature of SmBa2Cu3Ox coated conductor with artificial pinning center¶

Speaker: Yutaka Yoshida (Nagoya university)

1MO1-07_Yutaka Yoshida_Room_2.pdf

12:15 → 13:30 Lunch break

13:30 → 15:30 Poser : 1EP3 - Squids¶

13:30 1EP3-01 Ultrasound-Induced Magnetic Imaging of Tumors Targeted by Biofunctional Magnetic Nanoparticles¶

Speaker: Jen-Jie Chieh (National Taiwan Normal University)

13:31 1EP3-02 Rapid and quantitative discrimination of tumour cells on tissue slices¶

Speaker: Herng-Er Horng (National Taiwan Normal University)

13:32 1EP3-03 Investigation of geomagnetic orientation preserved in a stain containing iron compounds using a vector-type SQUID magnetometer¶

Speaker: Yoshiaki Adachi (Kanazawa Institute of Technology)

13:33 1EP3-04 Detection of Biological Targets Using HTS SQUID and Magnetic Markers¶

Speaker: Keiji Enpuku (Kyushu University)

13:34 1EP3-05 Ion implantation generation of normal/superconducting junctions for fabrication of all niobium SQUIDs¶

Speaker: Yanping Zhang (Sumitomo Heavy industries, Ltd.)

13:35 1EP3-06 Development of eddy current testing system using HTS-SQUID on a hand card for detection of fatigue cracks of steel plate used in highway roads¶

Speaker: Akira Tsukamoto (SUSTERA)

13:36 1EP3-07 Analysis of AC Impedance in Localized Region Using Magnetic Field Distribution Measured by HTS-SQUID¶

Speaker: Kenji Sakai (Okayama University)

13:37 1EP3-08 Ultra-sensitive SQUID system for pulsed field applications¶

Speaker: Rainer Körber (Physikalisch-Technische Bundesanstalt)

13:38 1EP3-10 Cryogenic Current Comparators for larger beamlines¶

Speaker: Paul Seidel (University of Jena)

13:39 1EP3-12 Adaptive suppression of power line interference in ultra-low field magnetic resonance imaging in an unshielded environment¶

Speaker: Quan Tao (Shanghai Institute of Microsystem and Information Technology (SIMIT),Chinese Academy of Sciences)

13:40 Low liquid helium consumption SQUID system with liquid nitrogen cooling interlayer for biomagnetism¶

Speaker: Li Lu (Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences)

13:41 1EP3-14 Detection of pressure-overloaded left ventricular hypertrophy based on current dipole estimation from magnetocardiograms of rats using HTS-SQUID system¶

Speaker: Yuto Tsukamoto (WASEDA University)

13:42 1EP3-15 The Study of Several System Key Parameters for the Measurement of Airborne Superconducting Full Tensor Magnetic Gradient¶

Speaker: Jun Wu (Shanghai Institute of Microsystem and Information Technology Chinese Academy of Sciences)

13:43 1EP3-16 Superconductive Resonator Configuration with Flux-Focuser as Ground Plane for RF-SQUID Magnetometer¶

Speaker: Fatemeh Qaderi (Sharif University of Technology)

13:44 1EP3-17 SQUID magnetometer system for high-sensitivity measurement of geomagnetic signals¶

Speaker: Jun Kawai (Applied Electronics Laboratory, Kanazawa Institute of Technology)

13:45 1EP3-18 Measurement of Magnetic Nanoparticles by Small HTS SQUID Array¶

Speaker: Saburo Tanaka (Toyohashi University of Technology)

13:46 1EP3-19 High-Tc SQUID detected low-field NMR and MRI for biomedical application¶

Speaker: Shu-Hsien Liao (National Taiwan Normal University)

13:47 1EP3-20 Development of a LTS-SQUID Based Airborne Full Tensor Gradiometers¶

Speaker: Longqing Qiu (Shanghai Institute of Microsystem And Information Technology, CAS)

13:48 1EP3-22 Cryptophane-Caged Xe-129 Relaxation Agent in Ultra-low Field NMR/MRI Based on High-Tc SQUID Detection¶

Speaker: Quan Tao (Forschungszentrum Jülich)

13:49 1EP3-23 High sensitivity analysis of the magnetization properties of magnetic nanoparticles changed by the viscosity of the water solution using HTS-SQUID¶

Speaker: Ryota Isshiki (Okayama University)

13:50 1EP3-24 Multipoint measurement of T (0, 1) mode guided wave using HTS-SQUID gradiometer¶

Speaker: Natsuki Masutani (Kindai University)

13:51 1EP3-25 Sensitivity improvement of sample rotation measurement method in HTS-SQUID magnetometer for measurement of diamagnetic materials¶

Speaker: Yuta Nakamura (Okayama University)

13:30 → 15:30 Poster : 1EP1 - Circuit Application & System¶

13:30 1EP1-01 Arrays of stacked SNS Josephson junctions for pulse-driven Josephson voltage standards¶

Speaker: Oliver Kieler (Physikalisch-Technische Bundesanstalt (PTB))

13:30 1EP1-03 A fast wire-routing method and an automatic layout tool for RSFQ digital circuits considering wire-length matching¶

Speaker: Nobutaka Kito (Chukyo University)

1EP1-03_Kito Nobutaka.pdf

13:31 1EP1-04 Logic Design of a 16-bit Bit-Slice Arithmetic Logic Unit for 32-/64-bit RSFQ Microprocessors¶

Speaker: Guang-Ming Tang (Institute of Computing Technology, Chinese Academy of Sciences)

13:32 1EP1-05 Die size requirements versus capability for SFQ SPGAs in multilayer fabrication processes¶

Speaker: Coenrad Fourie (Stellenbosch University)

13:33 1EP1-06 Microarchitectures for energy-efficient computing implemented in adiabatic quantum-flux-parametron logic¶

Speaker: Christopher Ayala (Institute of Advanced Sciences - Yokohama National University)

13:34 1EP1-07 Fabrication and Characterization of NbN-based Magnetic Josephson Junctions¶

Speaker: Li Feng (SIMIT)

13:35 1EP1-08 Superconducting And Cryogenic Environments For Quantum Technologies¶

Speaker: Ziad Melhem (Oxford Instruments)

13:36 1EP1-09 Superconducting and flexible multilayer high density interconnect¶

Speaker: Samuel d'Hollosy (Hightec MC AG)

1EP1-09_d'Hollosy Samuel.pdf

13:37 1EP1-10 Characterization of Frequency-Dependent Nonlinear Effects in Pulse-Bias Waveform Synthesis¶

Speaker: Christine Donnelly (NIST)

13:38 1EP1-11 Inductance Extraction of Superconducting Structures in the Presence of Magnetic Materials¶

Speaker: Kyle Jackman (Stellenbosch University, Department of Electrical and Electronic Engineering)

13:39 1EP1-12 Design and implementation of AQFP-based register files for an AQFP 4-bit RISC microprocessor prototype¶

Speaker: Qiuyun Xu (Yokohama National University)

13:40 1EP1-13 Charge-based superconducting digital logic family using quantum phase-slip junctions¶

Speaker: Uday Goteti (Auburn University)

1EP1-13_Goteti Uday.pdf

13:41 1EP1-14 Parallel Adders for Low-Pass Phase Modulation-Demodulation ADCs¶

Speaker: Timur Filippov (HYPRES)

13:42 1EP1-15 High-Resolution Characterization of Josephson Junctions and Magnetic Multilayers for Low-Power, Superconducting Logic and Memory Devices¶

Speaker: Nancy Missert (Sandia National Laboratories)

13:43 1EP1-16 Timing Characterization and Enabling Static Timing Analysis in Rapid Single Flux Quantum Circuits¶

Speaker: Massoud Pedram (University of Southern California, Department of Electrical Engineering, Los Angeles, CA, USA)

13:44 1EP1-17 Superconducting NbTi Flex Cables for High-Density Interconnects¶

Speaker: Robin Cantor (STAR Cryoelectronics)

13:30 → 15:30 Poster : 1EP2 - Detectors, sensors and other devices¶

13:30 1EP2-03 Characterizing Thick Electroplated Bismuth Films as Hard X-ray TES Absorbers¶

Speaker: Lisa Gades (Argonne National Laboratory)

13:31 1EP2-04 Influence of YBaCuO ultrathin film characteristics and front end features on HEB THz mixer performance¶

Speaker: Alain Kreisler (CentraleSupelec - GeePs)

13:32 1EP2-05 Hybrid superconducting mesa-structure with spin filtering manganite interlayer¶

Speaker: Kare'n Constantinian (Kotel’nikov Institute of Radio Engineering and Electronics of Russian Academy of Sciences)

13:33 1EP2-06 MgB2 films for superconducting detectors¶

Speaker: Sergey Cherednichenko (Chalmers University of Technology)

13:34 1EP2-08 Phase-Slip Events in MoRe-Si(W)-MoRe heterostructures¶

Speaker: Pascal Febvre (Université Savoie Mont Blanc)

13:35 1EP2-09 Frequency Response Characteristics Analysis of High Detectivity Backside Illuminated Free-Membrane Type IR Superconducting Bolometer¶

Speaker: Roya Mohajeri (Sharif University of Technology)

13:36 1EP2-10 The Characteristics of THz Metamaterials based on YBCO Superconductor¶

Speaker: Chiu-Hsien Wu (Department of Physics, National Chung Hsing University)

13:37 1EP2-11 Progress of pulse-driven AC Josephson voltage standards at PTB¶

Speaker: Johannes Kohlmann (PTB)

13:38 1EP2-12 High-temperature superconducting nano-meanders made by high energy ion irradiation¶

Speaker: Paul Amari (LPEM UMR 8213, ESPCI Paris)

13:39 1EP2-14 Transition Edge Sensors for Quench Localisation in SRF Cavity Testing¶

Speaker: Tobias Stegmaier (CERN)

13:40 1EP2-15 Development of transition edge sensors for the application in real-time multispectral-fluorescence-microscopy¶

Speaker: Katja Peiselt (Leibniz Insitut für Photonische Technologien)

1EP2-15_Peiselt Katja.pdf

13:41 1EP2-16 Superconducting noise bolometer with microwave bias and readout for terahertz array applications¶

Speaker: Artem Kuzmin (Karlsruhe Institute of Technology)

13:42 1EP2-17 Effects of thermal parameters and boundary resistances of MgO substrate on the response of YBCO transition edge bolometers¶

Speaker: Rana Nazifi Takantapeh (Sharif University of Technology)

13:43 1EP2-18 Design and Optimization of a Terahertz Metamaterial Absorber for YBCO Superconductive Transition Edge Bolometer¶

Speaker: Fatemeh Qaderi (Sharif University of Technology)

13:44 1EP2-19 Focused He+-Ion Beam High Temperature Superconducting narrow nanowires¶

Speaker: Cheryl Feuillet-Palma (ESPCI Paris - LPEM - UMR 8213)

13:45 1EP2-20 Self-Monitoring, "SMART" REBCO coated conductors¶

Speaker: Federico Scurti (North Carolina State University)

13:46 1EP2-21 Proximity induced superconducting properties in high mobility two-dimensional electron gas quantum well in In0.75Ga0.25As heterostructures¶

Speaker: Kaveh Delfanazari (Centre for Advanced Photonics and Electronics, University of Cambridge)

13:47 1EP2-22 Noise temperature characterisations of YBCO step-edge junction terahertz mixer operating at temperatures above 40 K¶

Speaker: Jia Du (Research Scientist CSIRO Manufacturing)

13:30 → 15:30 Poster : 1LP1 - Cables for accelerator magnets¶

13:30 1LP1-01 3D shape and cross sectional inhomogeneity of Nb3Sn superconducting wires in Rutherford cables¶

Speaker: Christian Scheuerlein (Fraunhofer Institute for Industrial Mathematics (ITWM), Kaiserslautern, Germany and University of Kaiserslautern (TUK), Kaiserslautern, Germany)

13:31 1LP1-03 Critical Current Measurements of Nb3Sn Rutherford Cables under Transverse Pressure¶

Speaker: Jean-Eudes Duvauchelle (CERN)

13:32 1LP1-04 Characterization of Nb3Sn Rutherford cable degradation due to strand cross over¶

Speaker: Jerome Fleiter (CERN)

13:33 1LP1-05 Study on the Nb3Sn Rutherford Cable for High-Energy Accelerators¶

Speaker: Yanmin Zhu (Western Superconducting Technologies Co., Ltd)

13:34 1LP1-06 Sheared Subelement Length in MQXF Cables made from RRP(R) Strands¶

Speaker: Ian Pong (Berkeley Lab)

13:35 1LP1-07 Two-layers Rutherford Cable – Possible Solution for High Field Superconducting Magnet¶

Speaker: Vitaly Vysotsky (Russian Scientific R&D Cable Institute)

13:36 1LP1-08 Thermal analysis of a superconducting bus-bar for SIS100 particle accelerator at FAIR¶

Speaker: Lukasz Tomkow (Lukasz Tomkow)

1LP1-08_Tomkow Lukasz.pdf

13:37 1LP1-10 Phased Array Ultra Sounds Non Destructive Tests of Soldered Current-Carrying Bus-Bar Splices of Superconducting Magnets¶

Speaker: Rosario Principe (CERN)

13:38 1LP1-11 Comparison of mechanical concepts for Nb3Sn high field accelerator magnets¶

Speaker: Mr Christian Löffler (CERN)

Comparison of mechanical concepts for Nb3Sn high field accelerator magnets-POSTER.pdf

13:30 → 15:30 Poster : 1LP2 - High field, NMR magnets and cables¶

13:30 1LP2-02 In-house Industrial Assembly of the Superconducting Conductor for the 43 T Hybrid Magnet at LNCMI-Grenoble¶

Speaker: Pierre Pugnat (CNRS/LNCMI-Grenoble)

1LP2-02_Pugnat Pierre.pdf

13:31 1LP2-03 Engineering Of New Class Of High Field Magnets For Research Application¶

Speaker: Ziad Melhem (Oxford Instruments)

13:32 1LP2-04 Shimming and Regulating a 36-T Hybrid Magnet for High Resolution NMR¶

Speaker: William Brey (Florida State University - NHMFL)

13:33 1LP2-05 Development of 400 MHz Cryogen Free Magnets for MAS Solid State NMR Spectroscopy¶

Speaker: Jeremy Good (Cryogenic Ltd)

13:34 1LP2-07 Conduction cooling system for a 400 MHz HTS NMR magnet¶

Speaker: Sehwan In (Korea Institute of Machinery and Materials)

13:35 1LP2-08 Design of a superconducting sensing structure with SQUIDs for sensitive gravity measurement¶

Speaker: Xinning Hu (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:36 1LP2-09 A Superconducting Magnet System for Animal Imaging System¶

Speaker: Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:37 1LP2-10 Recent development of the 25 T all-superconducting NMR magnet at IEE¶

Speaker: Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:30 → 15:30 Poster : 1LP3 - AC losses¶

13:30 1LP3-01 Inter-strand resistance in REBCO Roebel cables and effect on AC loss¶

Speaker: Simon Otten (Karlsruhe Institute of Technology)

13:31 1LP3-03 Ac loss calculation of a cosine-theta dipole magnet wound with coated conductors considering iron yoke influence¶

Speaker: Yusuke Sogabe (Kyoto University)

1LP3-03_Sogabe Yusuke.pdf

13:32 1LP3-04 AC loss in REBCO stator windings of superconducting motors for electric and hybrid aircrafts¶

Speaker: Enric Pardo (Institute of Electrical Engineering, SAS)

1LP3-04_Pardo Enric.pdf

13:33 1LP3-05 Simulations of electromagnetic behaviors of joint in YBCO coated conductors with 3D finite-element analysis¶

Speaker: Huadong Yong (Lanzhou University)

13:34 1LP3-06 Influence of Three Phases Imbalance on the AC Losses of Tri-axial HTS CORC Cable used in an All-Electric Aircraft¶

Speaker: Zixuan Zhu (University of Bath)

13:35 1LP3-07 Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft¶

Speaker: Yawei Wang (University of Bath)

13:36 1LP3-08 Quench propagation in Rutherford MgB2 cables¶

Speaker: Álvaro Cubero (Instituto de Ciencia de Materiales de Aragón (ICMA), CSIC – Universidad de Zaragoza)

1LP3-08_Cubero Álvaro.pdf

13:37 1LP3-09 Calculation of interstrand coupling losses in superconducting Rutherford cables with a continuum model¶

Speaker: Marco Breschi (University of Bologna)

13:38 1LP3-11 Dynamic resistance measurement in a four-tape YBCO stack¶

Speaker: Zhenan Jiang (Victoria University of Wellington)

1LP3-11_Jiang Zhenan.pdf

13:39 1LP3-12 Analysis of AC loss in different stacks of YBCO superconducting tapes¶

Speaker: Changxin Chi (Shanghai University/Shanghai Key Laboratory of High Temperature Superconductors)

13:40 1LP3-13 AC Losses in HTS Coils for Wireless Power Transfer Applications¶

Speaker: Boyang Shen (University of Cambridge)

13:41 1LP3-14 Simulation of linear generator made of HTS pancake coils stack¶

Speaker: Sukru Yildiz (Ahi Evran University)

13:42 1LP3-15 Measurements of crossed-field demagnetisation rate of trapped field magnets at 20-77 K and high frequencies¶

Speaker: Algirdas Baskys (University of Cambridge)

13:43 1LP3-17 Dragging hysteresis forces in a linear displacer with Coated Conductor Stacks¶

Speaker: José López (Physics Departament, UPC Barcelona Tech)

1LP3-17_López José.pdf

13:44 1LP3-18 Magnetization of rectangular 2G HTS stacks and dragging forces developed inside a multipolar magnetic channel: trapped field, current distribution and forces¶

Speaker: Miquel Carrera (Institut de Ciència de Materials de Barcelona, ICMAB-CSIC)

1LP3-18_Carrera Miquel.pdf

13:45 1LP3-20 AC loss in HTS fusion cables: measurements, modeling and scaling laws¶

Speaker: Nikolay Bykovsky (EPFL Swiss Plasma Center)

1LP3-20_Bykovsky Nikolay.pdf

13:46 1LP3-21 Multi-scale Model for AC Loss Calculation in Large-scale HTS-SMES¶

Speaker: Ying Xu (Huazhong University of Science and Technology)

1LP3-21_Xu Ying.pdf

13:47 1LP3-22 Effect of striation in assembled coated conductors¶

Speaker: Naoyuki Amemiya (Kyoto University)

13:48 1LP3-23 Transport AC loss measurements in bifilar stacks composed of YBCO coated conductors¶

Speaker: Wenjuan Song (Beijing Jiaotong University, China; Victoria University of Wellington, New Zealand)

1LP3-23_Song Wenjuan.pdf

13:30 → 15:30 Poster : 1LP4 - Levitation, transportation and propulsion¶

13:30 1LP4-01 The measurement and modeling of the levitation force between single grain YBCO bulk superconductors and permanent magnets¶

Speaker: Antonio Morandi (University of Bologna - DEI)

13:31 1LP4-02 Comparative analysis of the specific characteristics of the magnetic bearings with HTS elements¶

Speaker: Ekaterina Kurbatova (National Research University "Moscow Power Engineering Institute")

1LP4-02_Kurbatova Ekaterina.pdf

13:32 1LP4-04 Bulk superconductor levitation devices: Advances in and prospects for development¶

Speaker: Uta Floegel-Delor (Adelwitz Technologiezentrum GmbH (ATZ))

13:33 1LP4-05 Increase of levitation properties owing to high magnetic field in magnetic levitation system with magnetic shielding effect of HTS bulks¶

Speaker: Naohiro Negishi (Sophia University)

13:34 1LP4-06 Thermal characteristics of a 400mm diameter levitating rotor in a superconducting magnetic bearing operating below at 10K for a CMB polarization experiment¶

Speaker: Yuki Sakurai (Kavli IPMU (WPI), UTIAS, The University of Tokyo)

13:35 1LP4-07 Simulation of magnetization and heating processes in HTS tapes stacks¶

Speaker: Irina Anishchenko (National Research Nuclear University MEPhI)

1LP4-07_Anishchenko Irina.pdf

13:36 1LP4-08 Prototype of a Rings based zero-field-cooled (ZFC) YBCO magnetic bearing¶

Speaker: António Arsénio (IDMEC, Instituto Superior Técnico, Universidade de Lisboa)

1LP4-08_Arsénio António.pdf

13:37 1LP4-09 Fabrications and Cooling Tests on Conduction Cooled HTS Coils with Heat Pipes¶

Speaker: Jun Tokushige (Kagoshima University)

13:38 1LP4-10 Influence of magnetic field configuration on levitation force for HTS tapes stack¶

Speaker: Dmitry Abin (National Research Nuclear University MEPhI)

13:39 1LP4-12 The levitation force of CC-tapes stack at different temperatures.¶

Speaker: Maxim Osipov (National Research Nuclear University MEPhI)

1LP4-12_Osipov Maxim.pdf

13:40 1LP4-13 Effect of Anisotropic Magnetization of HTS Bulk superconductors with Different Shapes on Suspension Rotational Loss¶

Speaker: Wenjiang Yang (Beihang University)

13:41 1LP4-15 High-Tc Superconducting Maglev Prototype Vehicle Running at a 160 km/h in an Evacuated Circular Test Track¶

Speaker: Yong Zhao (Southwest Jiaotong University)

1LP4-15_Zhao Yong.pdf

13:30 → 15:30 Poster : 1LP5 - Motors, generators and other rotating machines¶

13:30 1LP5-03 Electrical Losses and Temperature Distribution Analysis of a HTS Motor Considering PWM Schemes in Voltage Source Inverter¶

Speaker: Ji Hyung Kim (Dept. of Electrical Engineering, Jeju National University)

13:31 1LP5-04 Numerical Analyses on Influences of Armature Winding Shape and Yoke Arrangements on Total Losses in Fully Superconducting Synchronous Motors Using REBCO Tapes¶

Speaker: Akifumi Kawagoe (Kagoshima University)

13:32 1LP5-05 Comparative Characteristics of Rotary HTS Flux-pump considering Rotational State of HTS Load¶

Speaker: Jeyull Lee (Yonsei University)

13:33 1LP5-06 Design of a DC Transformer by an HTS Homopolar Motor-Generator Set¶

Speaker: Seyon Lee (Korea Polytechnic University)

13:34 1LP5-08 Experiments and Modelling of a Synchronous-Hysteresis Superconducting Machine with Stacks of Second Generation Tapes¶

Speaker: Guilherme Goncalves Sotelo (Universidade Federal Fluminense)

1LP5-08_Goncalves Sotelo Guilherme.pdf

13:35 1LP5-09 Superconductors under dynamic electromagnetic conditions in electric machines¶

Speaker: Peter O'Brien (Queensland University of Technology)

1LP5-09_O'Brien Peter.pdf

13:36 1LP5-10 Reduction and elimination of ac-losses in the superconducting super motor¶

Speaker: Minaru Kawamura (Okayama University of Science)

13:37 1LP5-12 Fabrication of a scaled MgB2 racetrack demonstrator pole for a 10 MW direct drive wind turbine generator¶

Speaker: Niklas Magnusson (SINTEF Energy Research)

1LP5-12_Magnusson Niklas.pdf

13:38 1LP5-13 A Novel Axial-Flux Magnetic Gear Using Stationary HTS Excitation¶

Speaker: Peng Gao (China University of Petroleum)

13:39 1LP5-14 Test of a Rotary HTS Flux-pump using Electromagnet for Constant Field Current of HTS Synchronous machine¶

Speaker: Haeryong Jeon (Yonsei University)

13:40 1LP5-15 Study on the optimal arrangement according to the purpose of superconducting bulk.¶

Speaker: Kazuhito Yamagishi (Yokohama National University)

13:41 1LP5-16 Relationship between Eccentricity and Amplitude of a Rotor Having a Non-uniform Magnetization Distribution Supported by a Superconducting Magnetic Bearing¶

Speaker: Hirotaka Ishii (Graduate School of Science and Technology Keio University)

13:42 1LP5-19 3D Modeling of Coils for Pulsed Field Magnetization of HTS Bulk Pellets Placed on an Inductor of a Superconducting Electrical Machine¶

Speaker: Kévin Berger (GREEN - University of Lorraine)

13:43 1LP5-20 Characterization of oriented and non-oriented electrical steels using the Epstein frame and a magnetic core, at room and cryogenic temperatures¶

Speaker: Anabela Pronto (UNINOVA-Centro de Tecnologia e Sistemas)

13:44 1LP5-21 Lorentz Force Velocimetry based on HTS bulk magnet system¶

Speaker: Oleksii Vakaliuk (Technische Universität Ilmenau)

13:30 → 15:30 Poster : 1LP6 - Transformers, SMES and fault current limiters¶

13:30 1LP6-01 Current limiting cooperation of superconducting transformers and cables¶

Speaker: Takayuki Tokuchi (Kyushu University)

13:31 1LP6-02 Fault tolerant HTS transformers: increasing the fault withstand time and recovery current¶

Speaker: Mike Staines (Robinson Research Institute, Victoria University of Wellington)

1LP6-02_Yazdani Asrami Mohammad.pdf

13:32 1LP6-03 Hybrid HTS-copper transformer of large turn-to-turn ratio¶

Speaker: Mariusz Stepien (Silesian University of Technology)

13:33 1LP6-04 The proposal of contact cooling system for superconducting transformer winding made of parallel tapes with transpositioners¶

Speaker: Beata Kondratowicz-Kucewicz (Electrotechnical Institute)

13:34 1LP6-05 Proposal to substitute Roebel cable with parallel tapes with clusters of transpositioners in modular construction of superconducting transformer windings¶

Speaker: Grzegorz Wojtasiewicz (Electrotechnical Institute)

13:35 1LP6-06 Considerations of HTS 2G superconducting transformer temperature during short circuit¶

Speaker: Grzegorz Wojtasiewicz (Electrotechnical Institute)

13:36 1LP6-07 The new concept of using the superconducting transformers in low and medium voltage distribution network¶

Speaker: Slawomir Kozak (Electrotechnical Institute)

13:37 1LP6-08 Optimization and analysis of a spherical 3-phase transformer having 2G HTS windings¶

Speaker: Paweł Lasek (Silesian University of Technology, Falculty of Electrical Engineering)

13:38 1LP6-13 Enhancing Fault Ride Through Capability and Transient Stability of DFIG with SMES-FCL¶

Speaker: Zixuan Zheng (Sichuan University)

13:39 1LP6-14 Application of Superconducting Magnetic Energy Storage for Stabilizing the Grid Integrated with Wind Power Generation Systems - A Review¶

Speaker: Vutukuru Vasudeva Rao (Indian Institute of Technology KHARAGPUR)

13:40 1LP6-15 Modeling and analysis of superconducting fault current limiter for system integration of battery banks¶

Speaker: Doaa M. Yehia (Tanta University)

13:41 1LP6-16 Improving Voltage Stability in DC Distribution Systems Using Small Scale Superconducting Magnetic Energy Storage¶

Speaker: Doaa M. Yehia (Tanta University)

13:42 1LP6-18 Design of a Medium Voltage Superconducting Series Reactor for a Grid-Connected Power Engineering Research Site¶

Speaker: Mohamed Fayaz Khan (University of KwaZulu Natal)

1LP6-18_Khan Mohamed Fayaz.pdf

13:43 1LP6-19 Superconducting Power Filter for DC Electrical Grids¶

Speaker: Loïc Queval (GeePs, CentraleSupélec, Univ. Paris-Saclay)

13:44 1LP6-20 Effective Grid Integration of Superconducting Magnetic Energy Storage Using Current-Fed Z-Source Converter¶

Speaker: Diaa-Eldin A. Mansour (Tanta University)

13:30 → 15:30 Poster : 1LP7 - FCL : design and devices¶

13:30 1LP7-01 Comparison of shell vs. core-type magnetic circuits in the performance of inductive superconducting fault current limiters under asymmetric faults¶

Speaker: Joao Murta-Pina (Centre of Technology and Systems (Uninova))

13:31 1LP7-02 Analysis of the effects of different types of faults in three-phase saturated cores SFCL¶

Speaker: Nuno Vilhena (FCT / UNL)

13:32 1LP7-03 Peak Current Limiting Characteristics of Transformer Type SFCL with Two Non-Isolated Secondary Windings¶

Speaker: Tae-Hee Han (Jungwon University)

13:33 1LP7-04 SFCL cooling characteristics according to the control variables¶

Speaker: Hankil Yeom (KIMM)

13:34 1LP7-06 Comparison of dual peak current limiting with current source location of a series-connected SFCL using two iron cores¶

Speaker: Seok-Cheol Ko (Kongju National University)

13:35 1LP7-07 Volume Effect of Dynamic Breakdown Strength in LN2 for Insulation Design of Resistive Superconducting Fault Current Limiters¶

Speaker: Naoki Hayakawa (Nagoya University)

13:36 1LP7-08 Magnetizing Characteristics of a Flux-Lock-Type SFCL with Two Magnetic Paths Using Its Third Winding¶

Speaker: Sung-Hun Lim (Soongsil University)

13:37 1LP7-09 Engineering design and test of low-resistance high temperature superconducting short-circuited coils¶

Speaker: Joao Murta-Pina (Centre of Technology and Systems (Uninova))

13:38 1LP7-10 Improvement of recovery characteristics of resistive SFCL made by GdBCO tape with several surface conditions under pressurized condition¶

Speaker: Satoshi Takaya (Kyoto University)

1LP7-10_Takaya Satoshi.pdf

13:39 1LP7-11 Increase of the normal resistivity of REBCO tapes for 320 kV superconducting fault current limiters¶

Speaker: Guillaume Escamez (NEXANS/SuperGRID)

13:40 1LP7-12 Winding Design and AC Loss Analysis of a 10-kV / 500-A Flux-coupling type Superconducting Fault Current Limiter¶

Speaker: Sinian Yan (State Key Laboratory of Advanced Electromagnetic Engineering and Technology,Huazhong University of Science and Technology)

1LP7-12_Yan Sinian.pdf

13:41 1LP7-13 Magnetizing Characteristics of Transformer Type SFCL with Additional Secondary Winding Due to Its Winding Direction¶

Speaker: Shin-Won Lee (Jungwon University)

13:42 1LP7-14 Measurements of electromechanical forces in superconducting fault current limiters tapes under short circuit conditions¶

Speaker: Anabela Pronto (UNINOVA-CTS)

13:43 1LP7-15 A Design Methodology for Optimisation of three-phase SFCL of Saturated Cores Type¶

Speaker: Nuno Vilhena (FCT / UNL)

13:44 1LP7-16 Operation of a SCFCL at 65 K¶

Speaker: Pascal Tixador (Grenoble INP)

13:45 1LP7-17 Research on the Magnetic Property of Saturated Iron-core Superconducting Fault Current Limiter¶

Speaker: Chi Zhang (Huazhong University of Science and Technology)

1LP7-17_Zhang Chi.pdf

13:46 1LP7-18 Experiment and design of new type DC superconducting fault current limiter¶

Speaker: Chaoqun Zhao (Tianjin University)

13:47 1LP7-19 Design, building and test of a 220V/300A braid type superconducting fault current limiter¶

Speaker: Fei Liang (Bath University)

13:48 1LP7-20 Experiments on a new type of DC superconducting fault current limiter¶

Speaker: Ying Xin (Tianjin University)

13:49 1LP7-21 HTS Power devices with low cryo-consumption for current conditioning, switching and limiting¶

Speaker: Alexander Usoskin (Bruker HTS GmbH)

1LP7-21_Usoskin Alexander.pdf

13:50 1LP7-22 Short-Circuit Current Limitation Through 2G YBCO Resistive-Type SFCL Devices: Technical and Economic Comparison with Traditional Air-Core Reactors¶

Speaker: Giuliano Angeli (Ricerca sul Sistema Energetico - RSE S.p.A.)

1LP7-22_Angeli Giuliano.pdf

13:51 1LP7-23 Experimental tests and analysis of a small-scale Noval Hybrid Type DC SFCL Prototype¶

Speaker: Siyuan Liang (School of electrical and electronic engineering, Huazhong University of Science and Technology; State Key Laboratory of Advanced Electromagnetic Engineering and Technology)

1LP7-23_Liang Siyuan.pdf

13:52 1LP7-24 Preliminary Investigation on Economic Aspects of Superconducting Magnetic Energy Storage (SMES) Systems and High Temperature Superconducting Transformers (HTST)¶

Speaker: Weijia Yuan (Florida State University Center for Advanced Power Systems)

13:30 → 15:30 Poster : 1MP1 - Strain and Irradiation¶

13:30 1MP1-01 Microstructure and mechanical properties of high manganese steel processed by cold working and aging at 4.2K¶

Speaker: Yi Shi (Institute of Plasma Physics)

1MP1-01_Jin Huan_SHI.pdf

13:31 1MP1-02 Effects of rolling deformation on the critical current under transverse stress of PIT Nb3Sn wires¶

Speaker: Luc Gamperle (University of Geneva, Departement of Quantum Matter Physics)

13:32 1MP1-03 X-ray Stress Measurement of CrN coated Practical Nb3Sn Superconducting Wire¶

Speaker: Shutaro Machiya (Daido University)

13:33 1MP1-04 Characterization of irreversible degradation of Nb3Sn Rutherford cables due to transversal compression stress at room temperature¶

Speaker: Patrick Ebermann (CERN)

1MP1-04_Patrick Ebermann.pdf

13:34 1MP1-05 Axial tensile stress-strain characteristics of WST high Jc Nb3Sn strands¶

Speaker: Huajun Liu (Institute of Plasma Physics, Chinese Academy of Sciences)

13:35 1MP1-06 E-WASP, a facility to test strain, temperature, magnetic field and current effects on superconducting samples¶

Speaker: Luigi Muzzi (ICAS S.C.r.l.)

1MP1-06_Quagliata Tamisari Federico.pdf

13:36 1MP1-07 Prediction of Strain Degradation in Superconducting Accelerator Magnets Nb3Sn Coils Using Exponential Scaling Laws¶

Speaker: Giorgio Vallone (CERN)

1MP1-07_Vallone Giorgio.pdf

13:37 1MP1-09 Influence of the microstructure on the pinning force scaling behavior of Nb3Sn wires¶

Speaker: Thomas Baumgartner (TU Wien, Atominstitut)

1MP1-09_Baumgartner Thomas.pdf

13:38 1MP1-10 Fast neutron irradiation on K doped Ba-122 Single Crystals¶

Speaker: Daniel Kagerbauer (TU Wien, Atominstitut)

1MP1-10_Kagerbauer Daniel.pdf

13:39 1MP1-11 Effects of proton irradiation on the vortex dynamics of Fe(Se,Te) thin films¶

Speaker: Valeria Braccini (CNR-SPIN)

13:40 1MP1-12 Numerical simulation of die compaction of Mg and B powder mixture using pressure-dependent constitutive model¶

Speaker: Young-Seok Oh (Korea Institute of Materials Science)

13:41 1MP1-13 Improvement of the tensile and bending stress tolerance on MgB2 wire made by In-situ method¶

Speaker: Hideki Tanaka (Hitachi)

1MP1-13_Tanaka Hideki.pdf

13:30 → 15:30 Poster : 1MP2 - Cuprate Thin Films 1/2¶

13:30 1MP2-01 Vortex pinning study on epitaxial YBa2Cu3O7-x thin film grown on decorated MgO(001) single crystal substrates with La0.66Sr0.33MnO3 nano-islands¶

Speaker: Traian Petrisor Jr. (Technical University of Cluj-Napoca)

13:31 1MP2-02 Ink-jet printing of low-fluorine YBCO nanocomposite thin films with preformed HfO2 nanocrystals¶

Speaker: Hannes Rijckaert (Ghent University)

13:32 1MP2-03 Double-sided inkjet printed YBCO films on CZO/YSZ buffered sapphire substrates¶

Speaker: Roxana Vlad (Oxolutia SL)

13:33 1MP2-05 Effects of Zr Doping on Magnetic and Structural Properties of DyBa2Cu3O7-d Thin Films¶

Speaker: Yuri Aparecido Opata (DTU Energy - Technical University of Denmark)

13:34 1MP2-06 TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy films on CeO2 buffered R-Al2O3 substrates¶

Speaker: Keita Sakuma (Seikei University)

13:35 1MP2-07 Microwave-assisted YBCO precursors: A fast and reliable method towards chemical precursors for superconducting thin films¶

Speaker: Hannes Rijckaert (Ghent University)

13:36 1MP2-08 Preparation of YBa2Cu3O7-δ and (La0.85Sr0.15)2CuO4 multilayered structure for superconducting connection¶

Speaker: Yuhei Shimizu (National Institute of Advanced Industrial Science and Technology)

13:37 1MP2-09 Preparation of YBa2Cu3O7 - BaMO (M=Zr, Hf) superconductor nanocomposite using colloidal solution with preformed nanoparticles¶

Speaker: Ziliang Li (Institut de Ciència de Materials de Barcelona, CSIC)

13:38 1MP2-10 The influence of seed layer on the structure and superconducting property of BaHfO3 doped Y0.5Gd0.5Ba2Cu3O7-δ film prepared by pulsed laser deposition¶

Speaker: Linfei Liu (Shanghai Jiao Tong University)

1MP2-10_Liu Linfei.pdf

13:39 1MP2-12 The phase stability diagram of GdBa2Cu3O7-δ for the nominal composition and refinement of oxide inclusion in GdBCO films in low oxygen pressures¶

Speaker: Insung Park (Department of Material Science and Engineering, Research Institute of Advanced Materials (RIAM), Seoul National University, Korea)

13:40 1MP2-13 Synthesis and characterization of Y(1-x)NdxBa2Cu3O7-δ High Temperature Superconductors by Acetate Method¶

Speaker: Marcelo Neves (Uerj)

1MP2-13_Silva Ana Carolina.pdf

13:41 1MP2-14 High growth rate of YBCO films by Transient Liquid Assisted Growth by oxygen partial pressure control¶

Speaker: Silvia Rasi (Universitat de Girona)

13:42 1MP2-15 Impact of Humidity and the Additive 2,4-Pentanedione during the Pyrolysis of Gd0.5Y0.5Ba2Cu3O7-x Superconductors Prepared by Chemical Solution Deposition¶

Speaker: Carl Buehler (Karlsruhe Institute of Technology)

13:43 1MP2-16 Role of Oxygen exchange kinetics in the engineering of carrier concentration of YBa2Cu3O7-δ films¶

Speaker: Alexander Stangl (ICMAB-CSIC)

13:44 1MP2-17 Effect of oxygen partial pressure during annealing process on the epitaxy of LZO buffer layer for coated conductors¶

Speaker: Ping Ji (Northwest Institute for Nonferrous Metal Research, Xi’an 710016, P. R. China)

13:30 → 15:30 Poster : 1MP3 - Measurement Techniques 1/2¶

13:30 1MP3-02 Experimental and numerical investigation of shielding performances of superconducting shields using CC tapes¶

Speaker: Yoh Nagasaki (GeoCosmo Science and Research Center)

13:31 1MP3-03 Exploitation-generated changes in the resistance-temperature characteristics of the coal resistors (TVO)¶

Speaker: Kamil Kozłowski (Joint Institute for Nuclear Research)

1MP3-03_Kozłowski.pdf

13:32 1MP3-04 Selecting FBG coatings for optical fiber sensing of Quench in high temperature superconductor¶

Speaker: Yanchao Liu (Beijing Jiaotong university)

1MP3-04_Liu Yanchao.pdf

13:33 1MP3-05 Efficient cooling for electric current transport stability in superconducting materials¶

Speaker: Francesco Avitabile (Dipartimento di Fisica, Università degli Studi di Salerno)

13:34 1MP3-07 Determination of the complete penetration magnetic field of a HTS pellet from the measurements of the magnetic field at its top-center surface¶

Speaker: Bruno Douine (UBO)

13:35 1MP3-08 Comparison of magnetizing characteristics of superconducting bulk magnet cooled by Stirling and GM refrigerators during pulsed field magnetization¶

Speaker: Kazuya Yokoyama (Ashikaga Institute of Technology)

1MP3-08_Yokoyama Kazuya.pdf

13:36 1MP3-11 High resolution imaging of magnetic flux distributions in superconductors with scanning x-ray microscopy at low temperatures¶

Speaker: Stephen Ruoß (Max-Planck-Institute for Intelligent Systems Stuttgart)

1MP3-11_Ruoß Stephen.pdf

13:37 1MP3-12 Development of Image Analysis Techniques for Quantitative Microscopy on Superconducting Materials¶

Speaker: Peter Lee (Applied Superconductivity Center, NHMFL, FSU)

13:38 1MP3-13 Correlating magnetic flux distributions with superconductor microstructure using magnetic force microscopy¶

Speaker: Josef Hazi (Oxford University)

13:30 → 15:30 Poster : 1MP4 - Flux Pinning Non-Cuprates¶

13:30 1MP4-01 Correlation of the microstructure and magnetic properties of neutron irradiated Nb3Sn superconductors¶

Speaker: Stephan Pfeiffer (TU Wien)

1MP4-01_Pfeiffer Stephan.pdf

13:31 1MP4-02 High performance MgB2 bulks using carbon-coated amorphous boron and silver addition¶

Speaker: Masaki Higuchi (Shibaura Institute of Technology)

13:32 1MP4-03 Experimental evaluation for characteristics of MgB2 Rutherford cables with a large current capacity¶

Speaker: Sora Mizuochi (Sophia University)

13:33 1MP4-04 Flux pinning by InAs nanorods in Nb¶

Speaker: Dong Ho Kim (Yeungnam University)

1MP4-04_Kim Dong Ho.pdf

13:34 1MP4-06 Local probing of superconducting condensate¶

Speaker: Ritika Panghotra (KU Leuven)

13:35 1MP4-08 Anisotropy Effects on the Quenching Current of FeSeTe Thin Films¶

Speaker: Antonio Leo (Department of Physics "E. R. Caianiello", University of Salerno, and CNR-SPIN, Salerno)

13:36 1MP4-09 Analysis of flux pinning forces in bulk superconductors for applications¶

Speaker: Michael Koblischka (Saarland University)

13:37 1MP4-10 Enhanced critical current density in bulk MgB2¶

Speaker: Miryala Muralidhar (Shibaura Institute of Technology)

13:30 → 15:30 Poster : 1MP5 - Magnetization and Trapped Field + AC Losses 1/2¶

13:30 1MP5-01 Magnetic study of the low temperature anomalies in the optimally doped PrBCO compound¶

Speaker: Mahieddine Lahoubi (Badji-Mokhtar Annaba University, Faculty of Sciences,)

13:31 1MP5-02 Electromagnetic field analysis of a twisted superconducting strip with sweeping magnetic field¶

Speaker: Yoichi Higashi (National Institute of Advanced Industrial Science and Technology)

13:32 1MP5-04 Magnetic Measurements of the Critical Current Density in HTS Tapes in the Field Range up to 30T with self-field corrections.¶

Speaker: Andrew Smith (University of Durham)

1MP5-04_Smith Andrew.pdf

13:33 1MP5-05 Accurate Loss Estimation of Coated Conductors in External Magnetic Fields: Dynamic Loss and Magnetisation Loss¶

Speaker: Quan Li (University of Edinburgh)

13:34 1MP5-06 Magnetization of YBCO film with ac travelling magnetic waves of relatively short wavelengths¶

Speaker: Wei Wang (No.24 South Section 1, Yihuan Road)

13:35 1MP5-07 Magnetization Loss Characteristics of a Pancake Coil Fabricated by GdBCO Tape in kHz Frequency Band¶

Speaker: Ryota Inoue (Tohoku University)

13:36 1MP5-08 Theoretical evaluation of the screening-current-induced field in HTS coils with tape wires¶

Speaker: Yasunori Mawatari (National Institute of Advanced Industrial Science and Technology (AIST))

13:37 1MP5-09 AC Loss Analysis of High Temperature Superconducting Conductors on Round Core¶

Speaker: Seyeon Lee (Korea Polytechnic University)

1MP5-09_Choi Kyeongdal.pdf

13:38 1MP5-10 Measurements and numerical modelling of magnetization loops in two level undercut-profile substrate-based filamentary coated conductors¶

Speaker: Andrea Insinga (Technical University of Denmark)

13:39 1MP5-11 Magnetization AC losses in flat Al sheated MgB2 cables¶

Speaker: Ján Kováč (Institute of Electrical Engineering Slovak Academy of Science)

13:40 1MP5-12 Magnetization profiles of AC type-II superconducting wires subject to constant sources of magnetic field¶

Speaker: Harold Steven Ruiz (University of Leicester)

13:41 1MP5-14 Electromagnetic response of DC type-II superconducting wires under oscillating magnetic excitations¶

Speaker: Bright Chimezie Robert (University of Leicester)

13:42 1MP5-15 Numerical Analysis of AC Losses in YBCO Conductors Carrying AC Transport Current with Defect under AC Magnetic Field¶

Speaker: Wei Chen (Southwest Jiaotong University)

1MP5-15_Chen Wei.pdf

13:30 → 15:30 Poster : 1MP6 - MgB2 1/2¶

13:30 1MP6-01 Magnetic Microscopy for Nondestructive Characterization of Local Critical Current Distribution in Multi-filamentary MgB2 Wires with Magnetic Sheath Materials¶

Speaker: Shuhei Bochi (Kyushu University)

1MP6-01_Bochi Shuhei.pdf

13:31 1MP6-03 Achievements of high pressure MgB2 synthesis: can in situ samples reach mass density and grain connectivity of Mg diffusion samples?¶

Speaker: Tomasz Cetner (Institute of High Pressure Physics PAS)

13:32 1MP6-04 Effect of sintering conditions on modified IMD wire deformed by hydroextrusion¶

Speaker: Miloslav Kulich (Institute of Electrical Engineering)

13:33 1MP6-05 Aging of commercial MgB2 wires in liquid hydrogen¶

Speaker: Wilfried Goldacker (Karlsruhe Institute of Technology)

13:34 1MP6-06 Development and characterization of a multifilamentary MgB2 superconducting wire¶

Speaker: Durval Rodrigues Jr (Escola de Engenharia de Lorena - Universidade de São Paulo)

1MP6-06_Da Silva Lucas Barboza Sarno.pdf

13:35 1MP6-07 Effect of Bi mixing routes on MgB2 superconductors¶

Speaker: Kookchae Chung (Korea Institute of Materials Science)

13:36 1MP6-08 The Effect of Bi-2212 Addition on The Superconducting Properties of Bulk MgB2 Samples¶

Speaker: Meryem Alp (Ankara University)

13:37 1MP6-09 Magneto-optical, microstructural and magnetization measurements of in situ Fe/MgB2 conductors made from ball-milled precursor¶

Speaker: Elena Martínez (ICMA (CSIC - Universidad de Zaragoza))

1MP6-09_Martínez Elena.pdf

13:38 1MP6-11 Optimization of high isostatic pressure annealing processes for fabrication of MgB2 and Ba(Fe,Co)2As2 superconducting wires with high critical current density¶

Speaker: Andrzej Morawski (Institute of High Pressure Physics Polish Academy of Sciences Unipress)

13:39 1MP6-12 Composite superconducting MgB2 wires made by continuous process¶

Speaker: Bartek A. Glowacki (Department of Materials Science and Metallurgy, University of Cambridge)

1MP6-12_Glowacki Bartek A..pdf

13:40 1MP6-13 Effects of Dy2O3 doping on the Anisotropy and Transport of MgB2 wires¶

Speaker: Mike Sumption (MSE, The OHio State University)

13:30 → 15:30 Poster : 1MP7 - Coated Conductors 1/2¶

13:30 1MP7-01 The influence of laser energy density on microstructure and critical current of YGBCO and HGBCO films prepared by PLD¶

Speaker: Xiang Wu (Shanghai Jiao Tong University)

1MP7-01_Wu Xiang.pdf

13:31 1MP7-02 Development of textured YBa2Cu3O7−x superconducting coated conductors by Fluorine-Free MOD Route¶

Speaker: Jingyuan Chu (Shanghai Jiao Tong University)

13:32 1MP7-03 Enhanced flux pinning in TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy+BaZrO3 coated conductors by introducing an intermediate heat treatment¶

Speaker: Michio Sato (Seikei University)

13:33 1MP7-05 Tactical approaches in pilot-line manufacturing of HTS coated conductors for high field magnet application¶

Speaker: Ulrich Betz (Bruker HTS GmbH)

13:34 1MP7-06 Fabrication of HTS coated conductors via advanced high speed PLD process in Compact Pilot Line¶

Speaker: Alexander Usoskin (Bruker HTS GmbH)

13:35 1MP7-07 Enhancement of flux pinning by random pinning centers at 4.2 K in BaHfO3-doped SmBa2Cu3Oy coated conductors¶

Speaker: Shun Miura (Kyushu University)

13:36 1MP7-08 Effect of twin boundaries on the in-field Jc for TFA-MOD-(Y0.77Gd0.23)Ba2Cu3Oy wires¶

Speaker: Ryota Oku (Seikei University)

13:37 1MP7-10 Heating tolerance of critical current in industrial coated conductors¶

Speaker: Davide Uglietti (EPFL)

13:38 1MP7-12 Soldered contacts for HTS coated conductors¶

Speaker: Kai Ackermann (Karlsruhe Institute of Technology)

13:39 1MP7-13 Investigation Of Soldered Low-Resistance Joints For Commercial Coated Conductors Depending On Various Contact Pressures¶

Speaker: Pavel Degtyarenko (Joint Institute for High temperature of Russian Academy of Sciences)

13:40 1MP7-14 Determination of irreversible strain and stress limits of practical REBCO CC tapes under uniaxial tension¶

Speaker: Hyung-Seop Shin (Andong National University)

13:41 1MP7-15 Joint resistance characteristics of REBCO CC lap-joints using ultrasonic welding method in various temperatures and magnetic fields¶

Speaker: Mark A. Diaz (Andong National University)

13:42 1MP7-17 Development of a reel-to-reel process for laser structuring of coated conductors¶

Speaker: Rainer Nast (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP))

1MP7-17_Nast Rainer.pdf

13:43 1MP7-18 Increased pinning strength in 2nd generation REBCO coated conductors grown by liquid assisted processes.¶

Speaker: John Feighan (University of Cambridge)

1MP7-18_Feighan John.pdf

13:44 1MP7-19 Joining of second generation coated conductor tapes using a melt-texturing route¶

Speaker: Hagen Bryja (IFW Dresden)

13:45 1MP7-20 Coated superconducting tape model based on distribution of currents between the tape layers. Computing implementation¶

Speaker: Alfredo Álvarez (University of Extremadura)

1MP7-20_Álvarez Alfredo.pdf

13:46 1MP7-21 Correlation between resistances of face-to-face soldered joints and interface resistance between layers in superconducting tapes¶

Speaker: Nadezda Bagrets (Karlsruhe Institute of Techology)

13:47 1MP7-22 Coated conductor HTS tape for energy and magnet applications¶

Speaker: Markus Bauer (THEVA Dünnschichttechnik GmbH)

1MP7-22_Bauer Markus.pdf

15:30 → 15:50 Coffee Break

15:50 → 18:00 1P2 - Lessons learned¶

16:00 2P2-01 The LHC Main Magnet Electrical Interconnections: the Subtle Size of Superconductivity¶

Speaker: Lucio Rossi (CERN)

2P2-01_Lucio Rossi_Room 1.pdf

16:30 2P2-02 Some of the lessons learned during the construction and use of super magnets conductors in the last decades¶

Speaker: Roberto Penco (P.R.D. sas Genova)

2P2-02_Roberto Penco_Room 1.pdf

17:00 2P2-03 Learning from R&D and operation of HTS insert coil for high field magnet¶

Speaker: Satoshi Awaji (Tohoku University)

17:30 2P2-04 Transformation and perspectives of digital superconducting electronics¶

Speaker: Oleg Mukhanov (Hypres)

2P2-04_Oleg A. Mukhanov_Room 1.pdf

18:00 → 20:00 Exhibitor Reception

Tuesday 19 September ¶

08:00 → 08:50 2P1 - Plenary 2¶

08:00 2P1-01 HTS versus LTS: physics, technology, and application prospects¶

Speaker: Michael Eisterer

2P1-01_Michael Eisterer_Room 1.pdf

08:50 → 09:50 2EO1 - Invited Orals¶

08:50 2EO1-01 Execution of Stored Programs in a Single-Flux-Quantum Microprocessor with Embedded Memories at 50 GHz¶

Speaker: AKIRA FUJIMAKI (Nagoya University)

2EO1-01_Akira Fujimaki_Room 3+4.pdf

09:20 2EO1-02 Topological superconductivity revealed by nanoscale Josephson junctions¶

Speaker: Floriana Lombardi (Chalmers)

2EO1-02_Floriana Lombardi_Room 3+4.pdf

08:50 → 09:50 2LO1 - Invited Orals¶

08:50 2LO1-01 Manufacturing of LTS and HTS magnets for heavy-ion rotating gantry¶

Speaker: Shigeki Takayama (Toshiba Corporation)

09:20 2LO1-02 Superconducting Cyclotrons for Hadron Radiotherapy¶

Speaker: Dr Joseph Minervini (Massachusetts Institute of Technology)

2LO1-02_Joseph Minervini_Room 1.pdf

08:50 → 09:50 2MO1 - Invited Orals¶

08:50 2MO1-01 Industrial production of Nb3Sn conductors for particle accelerator magnets¶

Speaker: Lance Cooley (Fermilab)

2MO1-01_Lance Cooley_Room 2.pdf

09:20 2MO1-02 Status of Industrial Coated Conductor Production and Properties¶

Speaker: Bernhard Holzapfel

2MO1-02_EUCAS_Geneva_2017_Holzapfel_pub.pdf

09:50 → 10:15 Coffee Break

10:15 → 12:15 2EO2 - Novel Devices and concepts¶

10:15 2EO2-01 Controllable transfer of spin-polarized Cooper pairs into a half-metal manganite¶

Speaker: Jason Robinson (Department of Materials Science)

10:45 2EO2-02 Road to scalable superconducting phase memory devices¶

Speaker: Sergey Bakurskiy (NUST MISIS)

2EO2-02_Sergey Bakurskiy_Room 3+4.pdf

11:00 2EO2-03 Superconducting spintronics with high-temperature superconductors¶

Speaker: Angelo Di Bernardo (University of Cambridge)

11:15 2EO2-04 Non-monotonic temperature dependence of magnetoresistance in Nb-Ni-Nb planar junctions below superconducting transition¶

Speaker: Ekta Bhatia (National Institute of Science Education and Research)

2EO2-04_Ekta Bhatia_Room 3+4.pdf

11:30 2EO2-05 Signatures of unconventional superconductivity in oxide based 2DEG¶

Speaker: Daniela Stornaiuolo (Department of Physics, University of Naples "Federico II" and CNR-SPIN Napoli)

2EO2-05_Daniela Stornaiuolo_Room 3+4.pdf

11:45 2EO2-06 Phase dynamics and macroscopic quantum phenomena in hybrid Josephson junctions¶

Speaker: Davide Massarotti (Dipartimento di Fisica, Università degli Studi di Napoli Federico II - CNR-SPIN UOS Napoli)

2EO2-06_Davide Massarotti_Room 3+4.pdf

12:00 2EO2-07 Quantum Voltage Standard Developments at NIST¶

Speaker: Sam Benz (NIST)

2EO2-07_Sam Benz_Room 3+4.pdf

10:15 → 12:15 2LO2 - Rotating Machines and other Large Size Applications¶

10:15 2LO2-01 Status of the Ecoswing project¶

Speaker: Markus Bauer (THEVA Dünnschichttechnik GmbH)

2LO2-01_Markus Bauer_Room 1.pdf

10:45 2LO2-02 Space research experiments with bulk superconductors¶

Speaker: Frank N. Werfel (Adelwitz Technologiezentrum GmbH (ATZ))

2LO2-02_Frank N. Werfel_Room 1.pdf

11:00 2LO2-03 Superconducting Medium Speed Synchronous Electrical Generator for 2MW Class Wind Mills¶

Speaker: Xavier Granados (ICMAB-CSIC)

2LO2-03_Xavier Granados_Room 1.pdf

11:15 2LO2-04 Development of a 8 kW HTS Axial Flux Machine for Electrical Aircraft Propulsion¶

Speaker: min zhang

2LO2-04_Min Zhang_room 1.pdf

11:30 2LO2-05 Loss Analysis of a 3 MW HTS Ship Propulsion Motor¶

Speaker: Toshiyuki Yanamoto (Kawasaki Heavy Industories, Ltd.)

2LO2-05_Toshiyuki Yanamoto_Room 1.pdf

11:45 2LO2-06 Comparison of Levelized Cost of Energy of superconducting direct drive generators for a 10 MW offshore wind turbine¶

Speaker: Asger Bech Abrahamsen (DTU Wind Energy, Technical University of Denmark)

2LO2-06_Asger Bech Abrahamsen_Room 1.pdf

12:00 2LO2-07 A novel magnetic bearing using 2G double crossed loops¶

Speaker: Flávio Martins (Universidade Federal do Rio de Janeiro)

2LO2-07_Flávio Martins_Room 1.pdf

10:15 → 12:15 2MO2 - Strain, Irradiation, Imaging¶

10:15 2MO2-01 Characterisation of accelerator magnet coils and coil constituents using neutron and synchrotron sources¶

Speaker: Christian Scheuerlein (CERN)

2MO2-01_Christian Scheuerlein_Room 2.pdf

10:30 2MO2-02 Spatial Distributions of Flexural Strength in TSMG and TSIG YBCO Bulk Superconductors¶

Speaker: Kai Yuan (Danny) Huang (University of Cambridge)

2MO2-02_Kai Yuan (Danny) Huang_Room 2.pdf

10:45 2MO2-03 Influence of artificial pinning centers on the radiation resistance of coated conductors¶

Speaker: David Fischer (Technische Universität Wien)

2MO2-03_David Fischer_Room 2.pdf

11:00 2MO2-04 Effects of swift-particle irradiations on the critical current density in FeSe¶

Speaker: Tsuyoshi Tamegai (The University of Tokyo)

2MO2-04_Tsuyoshi Tamegai_Room 2.pdf

11:15 2MO2-05 The number of displacement per atom (dpa), a universal parameter describing the decrease of Tc in superconducting accelerator magnets¶

Speaker: Rene Louis Jacques Flukiger (Universite de Geneve)

2MO2-05_René Flükiger_Room 2.pdf

11:30 2MO2-06 Tailored design of vortex behaviour and its visualisation with high-speed magneto-optical video¶

Speaker: Alexey V. Pan (Institute for Superconducting and Electronic Materials, University of Wollongong)

2MO2-06_Alexey V Pan_Room 2.pdf

11:45 2MO2-07 Magneto-Optical Imaging Of Ac Suscetibility In Superconducting Thin Films¶

Speaker: Wilson Ortiz (Departamento de Fisica, Universidade Federal de Sao Carlos)

2MO2-07_Wilson Ortiz_Room 2.pdf

12:00 2MO2-08 Observations of deformation effects on A15 production in Nb3Sn Powder In Tube wires¶

Speaker: Chris Segal (National High Magnetic Field Laboratory)

2MO2-08_Christopher Segal_Room 2.pdf

12:15 → 13:30 Lunch break

13:30 → 15:30 2LO3 - Fusion and Medical Applications¶

13:30 2LO3-01 Overcoming the Challenges of the ITER Magnets¶

Speaker: Neil Mitchell

2LO3-01_Neil Mitchell_Room 1.pdf

14:00 2LO3-02 Manufacturing the European superconducting TF coils for ITER¶

Speaker: Marc Cornelis (Fusion for Energy)

2LO3-02_Marc Cornelis_Room 1.pdf

14:15 2LO3-03 Damage investigations in the HTS cable prototype after the cycling test in EDIPO¶

Speaker: Nikolay Bykovsky (EPFL Swiss Plasma Center)

2LO3-03_Nikolay Bykovsky_Room 1.pdf

14:30 2LO3-04 Recent progress in development of Bi2212 Cable-in-Conduit Conductor¶

Speaker: Shi Yi (Institute of Plasma Physics, CAS and ASIPP)

2LO3-04_Shi Yi_Room 1.pdf

14:45 2LO3-05 Stability Analysis of the 100 kA-class HTS STARS Conductor¶

Speaker: Yoshiro TERAZAKI (National Institute for Fusion Science)

2LO3-05_Yoshiro Terazaki_Room 1.pdf

15:00 2LO3-06 Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems¶

Speaker: Matt Rindfleisch (Hyper Tech Research)

2LO3-06_Matt Rindfleisch_Room 1.pdf

15:15 2LO3-07 Development of High Stable Magnetic Field HTS Magnet System for MRI¶

Speaker: Shoichi Yokoyama (Mitsubishi Electric Corporation,Advanced Technology R & D Center)

2LO3-07_Shoichi Yokoyama_Room 1.pdf

13:30 → 15:30 2MO3 - Fe-based¶

13:30 2MO3-01 Recent progress in Fe-based superconducting wires and tapes¶

Speaker: Yanwei Ma (Institute of Electrical Engineering, Chinese Academy of Sciences)

2MO3-01_Yanwei Ma_Room 2.pdf

14:00 2MO3-02 Fe(Se,Te) epitaxial thin films deposited on metallic alloys with or without buffer layer¶

Speaker: Valeria Braccini (CNR-SPIN)

2MO3-02_Valeria Braccini_Room 2.pdf

14:15 2MO3-03 Flux pinning behaviour of a BaFe2(As1-xPx)2 thin film on IBAD-MgO technical substrate¶

Speaker: Jena Hänisch (Karlsruhe Institute of Technology)

2MO3-03_Jens Hänisch_Room 2.pdf

14:30 2MO3-04 The key microstructural factors for high transport current in randomly oriented 122 polycrystalline materials¶

Speaker: Akiyasu Yamamoto (Tokyo University of Agriculture and Technology)

2MO3-04_Akiyasu Yamamoto_Room 2.pdf

14:45 2MO3-05 High performance Ba0.6K0.4Fe2As2 superconducting tapes at high magnetic field and high temperature with hot-pressing process¶

Speaker: He Huang (Institute of Electrical Engineering, Chinese Academy of Science)

2MO3-05_He Huang_Room 2.pdf

15:00 2MO3-06 In-plane anisotropy of the critical current density in detwinned Co doped Ba122 single crystals¶

Speaker: Johannes Hecher (TU Wien, Atominstitut)

2MO3-06_Johannes Hecher_Room 2.pdf

15:15 2MO3-07 Critical current density and the phase diagram of CaKFe4As4 single crystals¶

Speaker: Shiv Jee Singh (University of Oxford)

2MO3-07_Shiv Jee Singh_Room 2.pdf

13:30 → 15:31 2MO4 - Progress in HTS Conductor Industry¶

13:30 2MO4-01 Double-disordered HTS coated conductors and their assemblies aimed for ultra-high fields: large area tapes¶

Speaker: Ulrich Betz (Bruker HTS GmbH)

2MO4-01_Ulrich Betz_Room 3+4.pdf

13:41 2MO4-02 Progress of Wire Development and Process Improvement on 2G HTS at SuperPower¶

Speaker: Drew Hazelton (SuperPower Inc.)

2MO4-02_Drew Hazelton_Room 3+4.pdf

13:52 2MO4-03 Developement of long-length BMO doped REBCO coated conductors by hot-wall PLD process¶

Speaker: Shinji Fujita (Fujikura Ltd.)

2MO4-03_Shinji Fujita_Room 3+4.pdf

14:03 2MO4-04 Development of 2G HTS wire production at SuperOx¶

Speaker: Alexander Molodyk (S-Innovations)

2MO4-04_Alexander Molodyk_Room 3+4.pdf

14:14 2MO4-05 Progress in SuNAM’s Coated Conductor Manufacturing¶

Speaker: Hunju Lee (SuNAM Co., Ltd.)

2MO4-05_Hunju Lee_Room 3+4.pdf

14:25 2MO4-06 Cost-effective production of HTS wires by chemical solution deposition¶

Speaker: Michael Baecker (Deutsche Nanoschicht GmbH)

2MO4-06_Michael Baecker_Room 3+4.pdf

14:36 2MO4-07 Multi-deposited inkjet printed YBCO on IBAD-MgO arquitectures for coated conductors¶

Speaker: Alberto Calleja (OXOLUTIA SL)

2MO4-07_Alberto Calleja_Room 3+4.pdf

14:47 2MO4-08 Progress of REBCO coated conductor program at SJTU and SSTC¶

Speaker: Yijie Li (Shanghai Jiao Tong University)

2MO4-08_Yijie Li_Room 3+4.pdf

14:58 2MO4-09 Thick Films of REBaCuO/YBaCuO and Long-length Coated Conductors Derived by Reel-to-Reel Metallorganic Solution and Ion-beam Assisted Depositions¶

Speaker: Chuanbing Cai (Shanghai Key Laboratory of High Temperature Superconductors,Shanghai University/Shanghai Creative Superconductor Technologies Co. Ltd.)

2MO4-09_Chuanbing Cai_Room 3+4.pdf

15:09 2MO4-10 Advances in Bi-2223 wire for High Field Applications¶

Speaker: Shin-ichi Kobayashi (Sumitomo Electric Industries, Ltd.)

2MO4-10_Shin-ichi Kobayashi_Room 3+4.pdf

15:20 2MO4-11 2G HTS Coated Conductors Buffer Stack Architecture Improvements at STI¶

Speaker: Jeong-Uk Huh (Superconductor Technologies Inc)

2MO4-11_Jeong-Uk Huh_Room 3+4.pdf

15:31 → 15:50 Coffee Break

16:00 → 18:00 2IO1 - Industry Session - Superconductivity: From Industry to Society¶

16:00 2IO1-01 Superconductivity: A Game Changer for the Industry of Energy¶

Speaker: Prof. Carlo Rubbia (GSSI (Gran Sasso Science Institute))

2IO1-01_Prof. Carlo Rubbia_Room 1.pdf

16:30 2IO1-02 Investing in Superconductivity: The Industry of Science¶

Speaker: Frank Laukien (Bruker Corporation)

2IO1-02 _Dr. Frank Laukien_Room 1.pdf

17:00 2IO1-03 Investing in Superconductivity: The Electronics Challenge¶

Speaker: John Levy (Hypres Inc)

2IO1-03 _Dr. John Levy_Room 1.pdf

17:30 2IO1-04 Investing in Superconductivity: Large Scale Endeavours¶

Speaker: Jean Luc Lancelot (Sigmaphi)

2IO1-04 _Dr. Jean-Luc Lancelot_Room 1.pdf

18:30 → 20:00 Outreach event F. Gianotti¶

Wednesday 20 September ¶

08:00 → 08:50 3P1 - Plenary 3¶

08:00 3P1-01 The NHMFL 32 T superconducting magnet¶

Speaker: Hubertus Weijers (NHMFL/FSU)

3P1-01_Huub Weijers_Room 1.pdf

08:50 → 09:50 3EO1 - Invited Orals¶

08:50 3EO1-01 Nanowire-Based Single-Photon Detectors and Imagers¶

Speaker: Kark K Berggren (MIT)

3EO1-01_Karl K Berggren_Room 3+4.pdf

09:20 3EO1-02 Scanning SQUID-on-tip nanomagnetometry and nanothermometry of quantum systems¶

Speaker: Eli Zeldov (Weizmann Institute of Science)

3EO1-02_Eli Zeldov_Room 3+4.pdf

08:50 → 09:50 3LO1 - Invited Orals¶

08:50 3LO1-01 Achievements, Progress and Issues of No-Insulation HTS Coils¶

Speaker: Seungyong Hahn (Seoul National University)

3LO1-01_Seungyong Hahn_Room 1_SON.pdf

09:20 3LO1-02 Prospect of Liquid Hydrogen Cooled Superconducting Power Apparatus and Carbon Free Energy System¶

Speaker: Yasuyuki Shirai (Kyoto University)

3LO1-02_Yasuyuki Shirai_Room 1.pdf

08:50 → 09:50 3MO1 - Invited Orals¶

08:50 3MO1-01 New superconductors: waiting for room temperature (?)¶

Speaker: Gianni Profeta (Department of Physical and Chemical Sciences and SPIN-CNR)

3MO1-01_Gianni Profeta_Room 2.pdf

09:20 3MO1-02 A new chance for Bi-2212 wires to boost their applications in high magnetic fields¶

Speaker: andrea malagoli (CNR-SPIN)

3MO1-02_Andrea Malagoli_Room 2.pdf

09:50 → 10:15 Coffee Break

10:15 → 12:15 3LO2 - HTS Magnets and Cables¶

10:15 3LO2-01 Review of HTS cables for large magnets¶

Speaker: Davide Uglietti

3LO2-01_Davide Uglietti_Room 1.pdf

10:45 3LO2-02 Generation of 25 T: field quality and field profile measurements of a 4 T REBCO insert coil for a 21 T LTS magnet¶

Speaker: Christian Barth (University of Geneva, Department of Quantum Matter Physics)

3LO2-02_Christian Barth_Room 1.pdf

11:00 3LO2-03 First fully European CORC cables¶

Speaker: Michal Vojenciak (Institute of Electrical Engineering SAS)

3LO2-03_Michal Vojenciak_Room 1.pdf

11:15 3LO2-04 Current progress of High-temperature superconducting CORC® magnet cable and wire development¶

Speaker: Jeremy Weiss (University of Colorado)

3LO2-04_Jeremy Weiss_Room 1.pdf

11:30 3LO2-05 Transposed high current cables made with strong, rectangular Bi2212 superconductor wire¶

Speaker: Alexander Otto (Solid Material Solutions, LLC)

3LO2-05_Alexander Otto_Room 1.pdf

11:45 3LO2-06 An HTS Magnet Demonstrator for Space Experiment¶

Speaker: Gijs De Rijk (CERN)

3LO2-06_Gijs de Rijk_Room 1.pdf

12:00 3LO2-07 Results of the Development of a High Current HTS Cable for Accelerator Magnet Applications¶

Speaker: Luca Bottura (CERN)

3LO2-07_Luca Bottura_Room 1.pdf

10:15 → 12:15 3LO3 - Quench Protection¶

10:15 3LO3-01 Overview of the Quench Heater Performance for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC.¶

Speaker: Susana Izquierdo Bermudez (CERN)

3LO3-01_Susana Izquierdo Bermudez_Room 2.pdf

10:45 3LO3-02 Stability, quench, and current sharing in Roebel and CORC cables for HEP magnets¶

Speaker: Mike Sumption (The Ohio State University)

3LO3-02_Mike Sumption_Room 2.pdf

11:00 3LO3-03 Quench detection for HTS magnets using acoustic thermometry¶

Speaker: Maxim Marchevsky (Lawrence Berkeley National Lab. (US))

3LO3-03_Maxim Marchevsky_Room 2.pdf

11:15 3LO3-04 A novel quench detection method using radio frequency wave technology¶

Speaker: Hu Yanlan (Institute of plasma physics chinese academy od sciences)

3LO3-04_Hu Yanlan_Room 2.pdf

11:30 3LO3-05 Quench detection via Rayleigh backscattering interrogated optical fibers¶

Speaker: Federico Scurti (NCSU)

3LO3-05_Federico Scurti_Room 2.pdf

11:45 3LO3-07 Normal zone propagation velocity and surface temperature mapping in HTS coated conductors during quench¶

Speaker: Roland Gyuráki (Karlsruhe Institute of Technology)

3LO3-07_Roland Gyuraki_Room 2.pdf

12:00 3LO3-08 AC losses and inter-strand resistance in impregnated ReBCO Roebel cables¶

Speaker: Peng Gao (University of Twente)

3LO3-08_Peng Gao_Room 2.pdf

10:15 → 12:15 3MO2 - Magnetisation and Trapped Field¶

10:15 3MO2-01 Magnetic Flux Invasion and Field-Capturing in Pulsed-Field Magnetization for Layered MgB2 Bulk Magnets¶

Speaker: Tetsuo Oka (Niigata University)

3MO2-01_Tetsuo Oka_Room 3+4.pdf

10:30 3MO2-02 The successful incorporation of Ag into YBa2Cu3O7 bulk superconductors¶

Speaker: Jasmin Congreve (University of Cambridge)

3MO2-02_Jasmin Congreve_Room 3+4.pdf

10:45 3MO2-03 Towards optimisation of multi-pulse, multi-temperature pulsed field magnetisation of bulk high-temperature superconductors¶

Speaker: Mark Ainslie (University of Cambridge)

3MO2-03_Mark Ainslie_Room 3+4.pdf

11:00 3MO2-04 Progress in trapped field magnets made from stacks of coated conductor tape¶

Speaker: Anup Patel (Univeristy of Cambridge, Department of Materials Science and Metallurgy)

3MO2-04_Anup Patel_Room 3+4.pdf

11:15 3MO2-05 Magnetic Microscopy for Magnetic Relaxation in RE-123 Coated Conductor with DC Transport Current and External Magnetic Field¶

Speaker: Kohei Hisajima (Kyushu University)

3MO2-05_Kohei Hisajima_Room 3+4.pdf

11:30 3MO2-06 AC susceptibility analysis of coated conductor tapes¶

Speaker: Fedor Gömöry (Slovak Academy of Sciences)

3MO2-06_Fedor Gömöry_Room 3+4.pdf

11:45 3MO2-07 AC Losses of Roebel Cables with Striated 2G YBCO Strands¶

Speaker: Yifeng Yang

3MO2-07_Yifeng Yang_Room 3+4.pdf

12:00 3MO2-08 A finite element analysis of flux pumping in high Tc superconductors¶

Speaker: Archie Campbell (University of Cambridge)

3MO2-08_Archie Campbell_Room 3+4.pdf

12:15 → 13:30 Lunch break

13:30 → 15:30 Poster : 3EP1 - Microwave devices and SQUID application¶

13:30 3EP1-01 Josephson parametric amplifiers based on quadratic nonlinearity of rf SQUIDs operating at 4.2 K¶

Speaker: Marat Khabipov (Physikalisch-Technische Bundesanstalt)

13:31 3EP1-03 Utilizing HTS Resonators as NMR Transmit Coils¶

Speaker: William Brey (Florida State University - NHMFL)

13:32 3EP1-04 Analysis of characteristics of Al MKID resonators¶

Speaker: Takashi Noguchi (National Astronomical Observatory)

13:33 3EP1-05 A RF test vehicle for superconductor electronics interconnect¶

Speaker: Vladimir Talanov (Northrop Grumman Corp.)

13:34 3EP1-06 Study of Impedance Optimization between Modelling and Measurement of a Ka-band HTS MMIC Josephson Mixer¶

Speaker: Ting Zhang (University of Technology Sydney)

13:35 3EP1-07 Trimming Mechanism of External Quality Factor in HTS Bandpass Filter using Bulk Resonator¶

Speaker: Atsushi Saito (Yamagata University)

13:36 3EP1-08 Coupled superconducting resonators for tunneling-defect studies and qubit applications¶

Speaker: Bahman Sarabi (University of Maryland - College Park)

13:37 3EP1-09 Development of near infrared and visible Kinetic Inductance Detectors (KIDs) for astronomy¶

Speaker: Samir Beldi (GEPI, Observatoire de Paris, PSL Research University, CNRS)

13:38 3EP1-10 Two Dimensional Scanning of Intermodulation Distortion in Superconducting Resonators¶

Speaker: Stephen Remillard (Hope College Physics Department)

3EP1-10_Remillard Stephen.pdf

13:39 3EP1-11 Long period of time cooling technique using liquid nitrogen for HTS-SQUID systems¶

Speaker: Tsunehiro Hato (Superconducting sensing technology research association)

13:40 3EP1-12 Miniaturized Multi-Band HTS Bandpass Filter Design Using Single Perturbed Multimode Resonator with Multi-Transmission Zeros¶

Speaker: Jiaming Tang (Xiamen University)

3EP1-12_Tang Jiaming.pdf

13:41 3EP1-13 Compact Quad-Channel High Temperature Superconducting Diplexer Based on Stub-Loaded Square Ring Resonators¶

Speaker: Ping Gui (East China Jiaotong University)

3EP1-13_Guan Xuehui.pdf

13:42 3EP1-14 Design of Transmitting Filter using Cascaded Quadruplet Superconducting Bulk Resonator¶

Speaker: Takafumi Saito (Yamagata University)

13:43 3EP1-15 HTS dual-band bandpass filter with independently tunable center frequencies¶

Speaker: Naoto Sekiya (University of Yamanashi)

13:44 3EP1-17 Recently Developed Microwave Devices Based On High-TC Superconducting Films¶

Speaker: Liang Sun (O.Usikov IRE NAS of Ukraine)

3EP1-17_Cherpak Nickolay (Mykola).pdf

13:45 3EP1-18 Terahertz Radiation above 1 THz from intrinsic Josephson stack fabricated by acid modification process¶

Speaker: Takahiro Kato (Nagaoka University of Technology)

13:46 3EP1-19 Design of compact and high pole HTS tri-band bandpass filters using a new feeding structure¶

Speaker: Takahiro Unno (Japan)

13:47 3EP1-20 Design and Fabrication of HTS Pick-up Coil for Field-Swept Solid-State NMR¶

Speaker: Atsushi Saito (Yamagata University)

13:48 3EP1-21 Voltage Oscillations with Magnetic Flux in Thermally Hysteretic Nano-SQUIDs Based on Superconducting Weak Link¶

Speaker: Sourav Biswas (Indian Institute of Technology (IIT) Kanpur)

13:49 3EP1-22 Low-Loss Capacitively-Coupled Frequency Tuning and Impedance Matching Circuitry for HTS Based rf MRI Coils and Arrays¶

Speaker: Jarek Wosik (Texas Center for Superconductivity at University of Houston and Electrical and Computer Engineering Department, University of Houston, Houston, TX 77204, USA)

3EP1-22_Wosik Jarek.pdf

13:50 3EP1-23 Non-resonant microwave absorption in nano nickel added YBCO superconducting powders¶

Speaker: Fhulufhelo Nemangwele (University of Venda)

13:30 → 15:30 Poster : 3EP2 - Nano wire detectors and content information processing¶

13:30 3EP2-01 Superconducting Single Photon Detector with the Capability of Photon-number Resolving and Photon Positioning¶

Speaker: Xu Tao (Nanjing University)

3EP2-01_Tao Xu.pdf

13:31 3EP2-02 High Sensitivity Superconducting Nanowire Single Photon Detector Integrated with Distributed Bragg Reflector¶

Speaker: Yajun Chen (Nanjing University)

13:32 3EP2-03 Local and geometric timing jitter in superconducting nanowire single-photon detectors¶

Speaker: Alexej Semenov (DLR Institute of optical systems)

13:33 3EP2-05 Comparison of superconducting nanowire single photon detectors made of NbTiN and NbN thin films¶

Speaker: Xiaoyan Yang (Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS))

13:34 3EP2-06 Internal boundary conditions for elastic fluxon scattering at circuit interfaces¶

Speaker: Waltraut Wustmann (Laboratory for Physical Sciences, USA)

13:35 3EP2-08 Current dependence of the hot-spot response spectrum of superconducting single-photon detectors with different layouts¶

Speaker: Ilya Charaev (Karlsruhe Institute of Technology (KIT))

13:36 3EP2-09 Uniformity Analysis of Nanowires with Elemental Imaging¶

Speaker: Xiaoqing Jia (Research Institute of Superconductor Electronics (RISE), School of Electronic Science and Engineering, Nanjing University)

3EP2-09_Zhou Xiaoying.pdf

13:37 3EP2-10 Quasi-gated source for superconducting nanowire single-photon detector¶

Speaker: Xiaoqing Jia (Research Institute of Superconductor Electronics of Nanjing University)

3EP2-10_Zhang Labao.pdf

13:38 3EP2-11 Free-Space-Coupled Superconducting Nanowire Single Photon Detector Integrated with Distributed Bragg Reflector¶

Speaker: Yajun Chen (Nanjing University)

3EP2-11_Chen Yajun.pdf

13:39 3EP2-12 Superconducting components for quantum-information processing¶

Speaker: Elena Zhitlukhina (Donetsk Institute for Physics and Engineering, NANU)

13:40 3EP2-13 Superconducting nanowire avalanche photodetector made of amorphous molybdenum silicide material¶

Speaker: Misael Caloz (University of Geneva, GAP)

13:41 3EP2-14 Kinetic Inductance of Ultra-thin Magnesium Diboride Nanowires¶

Speaker: Thomas Melbourne (Temple University)

13:42 3EP2-15 Ultrafast photon-number-resolving detectors for NIR operating at 4.2 K¶

Speaker: Ekkehart Schmidt (Institute of Micro- und Nanoelectronic Systems (IMS), Karlsruhe Institute of Technology)

13:43 3EP2-16 One-dimensional p-wave superconductor toy-model for Majorana fermions in multiband semiconductor nanowires¶

Speaker: Durval Rodrigues Jr. (University of São Paulo - Lorena Engineering School)

3EP2-16_Rodrigues Jr. Durval.pdf

13:44 3EP2-17 Read-out Circuit Based on SFQ Logic Circuit for Photon-Number-Resolving SNSPD Array¶

Speaker: Hiroaki Myoren (Saitama University)

13:45 3EP2-18 Fast and high efficiency superconducting nanowire single photon detector at 630 nm¶

Speaker: Heqing Wang (Shanghai Institute of Microsystem and Information Technology (SIMIT))

13:30 → 15:30 Poster : 3LP1 - Fusion Magnets and Cables¶

13:30 3LP1-01 High current densities in round HTS CrossConductors of more than 500 A/mm² at 4.2 K, 12 T¶

Speaker: Michael J. Wolf (KIT)

13:31 3LP1-02 Experimental study on Bi-2212 CIC conductor¶

Speaker: Huajun Liu (Institute of Plasma Physics, Chinese Academy of Sciences)

3LP1-02_Liu Huajun.pdf

13:32 3LP1-03 Re-examination of refrigeration power of the LHD cryogenic system after 18 years of operation¶

Speaker: Toshiyuki Mito (National Institute for Fusion Science)

3LP1-03_Mito Toshiyuki.pdf

13:33 3LP1-05 Thermal-hydraulic characterization of the ITER Toroidal Field Insert coil¶

Speaker: Alberto Brighenti (Politecnico di Torino)

3LP1-05_Brighenti Alberto.pdf

13:34 3LP1-06 Multi-Tape Stack High Current Cable for No-Insulation HTS Fusion Magnet¶

Speaker: Seungyong Hahn (Seoul National University)

13:35 3LP1-08 Secondary Phases Quantification And Fracture Toughness At Cryogenic Temperature Of Austenitic Stainless Steel Welds For High Field Superconducting Magnets¶

Speaker: Ignacio Aviles (CERN / Universidad Carlos III de Madrid)

13:36 3LP1-10 NDT Status Of PF-1 Coil Welds¶

Speaker: Igor Sokolov (NIIEFA)

3LP1-10_Sokolov Igor_Update.pdf

13:37 3LP1-11 Mechanical analysis of the ENEA TF coil proposal for the EU DEMO fusion reactor¶

Speaker: Francesco Giorgetti (University of Rome Tor Vergata)

3LP1-11_Biancolini Marco Evangelos.pdf

13:38 3LP1-12 Performance analysis of the first PF coils design for the EU DEMO fusion reactor¶

Speaker: Andrea Zappatore (Politecnico di Torino)

3LP1-12_Zappatore Andrea.pdf

13:39 3LP1-13 Winding & Forming Technology Development for CFETR Central Solenoid Model Coil¶

Speaker: Houxiang Han (Institute of Plasma Physics Chinese Academy of Sciences)

3LP1-13_Han Houxiang.pdf

13:40 3LP1-14 Experimental study of steady-state transverse heat transfer in a single channel CICC¶

Speaker: Monika Lewandowska (West Pomeranian University of Technology, Szczecin)

3LP1-14_Lewandowska Monika.pdf

13:41 3LP1-15 R&D of the Helium Inlet for the CFETR Central Solenoid Model Coil¶

Speaker: Aihua Xu (Institute of Plasma Physics Chinese Academy of Sciences)

3LP1-15_Xu Aihua.pdf

13:42 3LP1-16 Thermal-Hydraulic Analysis of the DEMO CS coil¶

Speaker: Aleksandra Dembkowska (West Pomeranian University of Technology, Szczecin)

3LP1-16_Dembkowska Aleksandra.pdf

13:43 3LP1-17 Thermal-hydraulic test of the ENEA TF conductor sample for the EU DEMO fusion reactor¶

Speaker: Roberto Bonifetto (Politecnico di Torino)

3LP1-17_Bonifetto Roberto.pdf

13:30 → 15:30 Poster : 3LP2 - No insulation / Smart insulation Coils¶

13:30 3LP2-01 Investigation on two techniques for the reduction of screening current-induced field effects in ReBCO HTS coils¶

Speaker: Guillaume Dilasser (CEA Saclay)

3LP2-01_Dilasser Guillaume.pdf

13:31 3LP2-03 Thermal Quench Behaviors of 2G HTS Tape Samples with Polyimide Insulation and Smart Insulation Materials¶

Speaker: Chang Ju Hyeon (Jeju national university)

13:32 3LP2-04 Analysis of Dynamic Stress/Strain Distributions in a 10 T non-insulated GdBCO HTS Coil During Energization¶

Speaker: Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:33 3LP2-05 An adjustment method for turn-to-turn electrical contact resistance in No-Insulation REBCO coil: Multi-Layer Metal-Insulation method¶

Speaker: Satoka Yashiro (Waseda University)

13:34 3LP2-06 Simulation of electrical and thermal behavior of no-insulation REBCO pancake coil with multiple defects¶

Speaker: Qiyi Zheng (Waseda University)

13:35 3LP2-07 Non-uniform ramping loss distribution of multiple no-insulation REBCO coil system¶

Speaker: Yawei Wang (University of Bath)

13:36 3LP2-08 Investigation of Characteristics of No-Insulation Coil Considering the Influence of Stress Distribution on the Turn-to-Turn Contact Resistivity¶

Speaker: Guofeng Zhang (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)

3LP2-08_Zhang Yi.pdf

13:37 3LP2-09 Development of superconducting joints between Bi-2212/Ag wires¶

Speaker: Susannah Speller (University of Oxford, United Kingdom)

13:38 3LP2-11 Non-uniform ramping loss distribution of multiple no-insulation REBCO coil system¶

Speaker: Yawei Wang (University of Bath)

13:30 → 15:30 Poster : 3LP3 - HTS Magnets & Cables Modeling¶

13:30 3LP3-01 Innovative Electro-Thermal Modeling of Quench in REBCO Roebel Cables and Coils.¶

Speaker: Lorenzo Cavallucci (Department of Electrical, Electronic and Information Engineering, University of Bologna, Italy)

3LP3-01_Cavallucci Lorenzo.pdf

13:31 3LP3-02 Study of a superconducting magnetic diverter for the ATHENA X-RAY Space Telescope¶

Speaker: Nicolò Riva (EPFL)

13:32 3LP3-03 An Electromagnetic Analysis of REBCO Cable Configurations¶

Speaker: Luca Bottura (CERN)

13:33 3LP3-04 Simulation and analysis of an (RE)BCO tape stack magnet under the pulsed field magnetization¶

Speaker: Wenjiang Yang (Beihang University)

13:34 3LP3-05 A 3D T-A model for the stacks of second generation high temperature superconductor¶

Speaker: Jie Sheng (University of Bath)

13:35 3LP3-06 Influence of physical properties of a Coil Bobbin on Transient Thermal Stress in a REBCO Pancake-coil¶

Speaker: Daisuke Miyagi (Tohoku University)

13:36 3LP3-08 Parametric Evaluation of Pressure Drop and Heat Transfer with Nano Cryogenic Fluid in HTS cables¶

Speaker: Priyanka Anand (Lovely Professional University)

13:37 3LP3-10 Electromagnetic Parameter Analysis of YBCO Superconducting Cables With High Current for HTS Power Devices¶

Speaker: Shanshan Fu (China Electric Power Research Institute)

13:38 3LP3-11 Influence of the magnetization features of the HTS tape on the magnetic field homogeneity inside the superconducting unclosed shield¶

Speaker: Evgeny Kulikov (Joint Institute for Nuclear Research)

3LP3-11_Kulikov Evgeny.pdf

13:39 3LP3-14 Design of MgB2 superconducting joint using pressure-dependent finite element model¶

Speaker: Seong-Hoon Kang (Korea Institute of Materials Science)

13:40 3LP3-15 Conceptual Design of the Suspension Structures for High-temperature Superconducting Magnets Deployed in Mobile Platforms¶

Speaker: Timing Qu (Department of Mechanical Engineering, Tsinghua University)

13:41 3LP3-16 Shielding-current-induced fields in coils with various shapes wound with striated coated conductors¶

Speaker: Yudai Mizobata (Kyoto University)

13:42 3LP3-17 Screening currents within the Eucard HTS insert¶

Speaker: Philippe Fazilleau (cea)

3LP3-17_Fazilleau Philippe.pdf

13:43 3LP3-18 A 3-D Numerical Model of Critical Current in Twist Stacked Tape Cable¶

Speaker: Donghui Liu (Lanzhou University)

13:44 3LP3-19 HTS coil model for critical current calculation, quench behavior and comparison with wound sample experiment¶

Speaker: Tara Benkel (CNRS - LNCMI)

3LP3-19_Benkel Tara.pdf

13:45 3LP3-20 A 3D T-A model for the stacks of second generation high temperature superconductor¶

Speaker: Jie Sheng (University of Bath)

13:30 → 15:30 Poster : 3LP4 - Magnet Design and Quench¶

13:30 3LP4-02 Magnetic Design for the Superferric Multipole Magnets of the Super-FRS¶

Speaker: Hans Mueller (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

3LP4-02_Cho Eun Jung.pdf

13:31 3LP4-03 Force acting on a magnetic cloak placed in magnetic field¶

Speaker: Mykola Soloviov (IEE SAS)

3LP4-03_Soloviov Mykola.pdf

13:32 3LP4-04 Analytical Modeling of an Inductor ina Magnetic Circuit for Pulsed Field Magnetization of HTS Bulk¶

Speaker: Mohamed Elbaa (GREEN - University of Lorraine & LESI - University of Khemis Miliana)

13:33 3LP4-05 Capacity Allocation and Electromagnetic Optimization of SMES in Micro Grid¶

Speaker: Xiao Zhou (State Key Laboratory of Advanced Electromagnetic Engineering and Technology (R&D Center of Applied Superconductivity), Huazhong University of Science and Technology)

3LP4-05_Zhou Xiao.pdf

13:34 3LP4-06 A Compact Electromagnet with High-Tc Superconducting REBaCuO Tapes¶

Speaker: Chuanbing Cai (Shanghai Key Laboratory of High Temperature Superconductors, Shanghai University)

13:35 3LP4-07 Improvement of Magnetic Field Homogeneity from the HTS Joint-less Coil¶

Speaker: Seyeon Lee (Korea Polytechnic University)

3LP4-07_Lee Seyeon.pdf

13:36 3LP4-09 A 30kA IGBT based energy extraction system for the High Luminosity LHC magnet test facilities¶

Speaker: Gert Jan Coelingh (CERN)

13:37 3LP4-10 Over-Current Characteristics of Roebel Cable Sample With 2G YBCO Coated Conductor¶

Speaker: Panpan Chen (China Electric Power Research Institute)

13:38 3LP4-11 Study on hot spot temperature limits for epoxy-impregnated coil wound of Bi/Ag sheathed wire to be safe from damages caused by quenches¶

Speaker: Ryuta Matsuo (Sophia University)

13:39 3LP4-12 Experimental study on method to suppress hot spot temperature of HTS coil by quick transfer of current of quenching coil¶

Speaker: Ryuta Matsuo (Sophia University)

13:40 3LP4-13 Evaluation of Strain Tolerance to the Superconducting Magnet Quenching by the 3-point Bending Test Stand¶

Speaker: Manabu Aoki (Hitachi.Ltd. Research & Developing Group)

13:41 3LP4-14 Quench protection of the central solenoid model coil for the CFETR¶

Speaker: Yuanyuan Ma (Institute of Plasma Physics Chinese Academy of Sciences)

3LP4-14_Ma Yuanyuan.pdf

13:42 3LP4-15 Safety valve system for JT-60SA superconducting coils¶

Speaker: Kyohei Natsume (National Institute for Quantum and Radiological Science and Technology)

13:43 3LP4-16 Analysis of Voltage Noises for the Reliability Improvement of the KSTAR CS Quench Detection¶

Speaker: Geonwoo Baek (Yonsei University)

13:44 3LP4-17 Development of a digital quench detection system for Nb3Sn magnets and first measurements on prototype magnets¶

Speaker: Jens Steckert (CERN)

13:45 3LP4-19 Experiments to Validate New Method to Diagnose Soundness of The High Temperature Superconducting Coils by Pick-up Coil Pairs¶

Speaker: Akifumi Kawagoe (Kagoshima University)

13:46 3LP4-20 50 kV Fail-Safe Quench Detection System for Large Superconductor Magnets¶

Speaker: Walter H. Fietz (Karlsruhe Institute of Technology (KIT))

3LP4-20_Fietz Walter.pdf

13:47 3LP4-21 Partial isolation quench protection method for YBCO SMES magnet¶

Speaker: Qixing Sun (university of bath)

13:48 3LP4-22 Protection Strategy for HTS Coils in DC Electric Power Network¶

Speaker: Miyeon Yoon (Korea Polytechnic University)

13:49 3LP4-23 Quench detection utilizing stray capacitances¶

Speaker: Emmanuele Ravaioli (LBNL)

13:50 3LP4-24 Coil Development and Coupling-Loss Induced Quench Protection of Bi-2212 Magnets¶

Speaker: Daniel S. Davis (FSU-NHMFL)

3LP4-24_Davis Daniel S..pdf

13:30 → 15:30 Poster : 3LP5 - Levitation, transportation and propulsion¶

13:30 3LP5-01 Comparison of levitation forces between a permanent and a switchable magnetic track of the SupraTrans2 levitation system¶

Speaker: Tilo Espenhahn (IFW Dresden)

13:31 3LP5-02 Mechanical vibration test of a REBCO coil designed for application to the maglev¶

Speaker: Katsutoshi Mizuno (Railway Technical Research Institute)

13:32 3LP5-04 Research on HTS magnetic levitation bearing for submerged cryogenic disk motor-pump¶

Speaker: Liwang Ai (Institute of Electrical Engineering,Chinese Academy of Sciences;University of Chinese Academy of Sciences)

13:33 3LP5-05 Ripple field effects on the no-insulation rotor windings of high temperature superconductor machines used in all electrical aircraft.¶

Speaker: Yawei Wang (University of Bath)

13:34 3LP5-06 Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft¶

Speaker: Yawei Wang (University of Bath)

13:35 3LP5-07 Study of magnetic stiffness and effect on running stability in high speed train propelled by superconducting linear synchronous motor¶

Speaker: Jinho Lee (Korea Railroad Research Institute)

13:36 3LP5-08 The Critic Liquid-gas Phase Transition between Liquid Nitrogen and YBCO HTS bulks: from FEM Modeling to Its Experimental Study for ZFC Levitation Devices¶

Speaker: Paulo Branco (IDMEC - Prof. Paulo Branco)

3LP5-08_Branco Paulo.pdf

13:37 3LP5-10 Numerical modelling of Superconducting network in an All-Electric Aircraft¶

Speaker: Sriharsha Venuturumilli (University of Bath)

13:38 3LP5-11 Wireless Power Charging Characteristics between Copper Antenna and HTS Receiver Module under Strong Levitation Field in Superconducting MAGLEV Train¶

Speaker: Je Yull Lee (Suwon Science College)

13:39 3LP5-12 Analysis of the motion of a body in the linear HTS suspension along a curvilinear trajectory¶

Speaker: Pavel Kurbatov (National Research University "Moscow Power Engineering Institute")

3LP5-12_Kurbatova Ekaterina.pdf

13:40 3LP5-17 An Electromagnetic Turnout of Halbach-type PMG for Superconducting Maglev¶

Speaker: Yanxing Li (Southwest Jiaotong University)

3LP5-17_Li Yanxing.pdf

13:41 3LP5-18 Analysis of conducted emissions in high power superconducting electrical propulsion system¶

Speaker: Xiaojian Li (china north vehicle research institute)

13:42 3LP5-19 A Design Method of HTS Bulks Array for Decreasing Rotation Loss in a Superconducting Maglev Micro-thrust Stand¶

Speaker: Ye Mao (Beihang University)

13:30 → 15:30 Poster : 3LP6 - SMES and Combined devices¶

13:30 3LP6-01 Influences of Flux Diverter on Critical Current and Energy Storage Capacity of Mini-Size SMES Magnet Wound by 100-Meter-Class GdBCO Tape¶

Speaker: Jian-Xun Jin (Tianjin University)

3LP6-01_Liu Xiao-Dong.pdf

13:31 3LP6-03 Development and experimental investigation of a pancake coil consisted of high temperature composite superconductor with spiral cooling channel¶

Speaker: Jiahui Zhu (China Electric Power Research Institute)

13:32 3LP6-04 Test in strong background field of the first modular element of a REBCO 1MJ high energy density SMES¶

Speaker: Jeremie Ciceron (CNRS - Institut Néel)

3LP6-04_Ciceron Jeremie.pdf

13:33 3LP6-05 Research on the Application of Superconducting Magnetic Energy Storage in Microgrid System for Smoothing Power Fluctuation Caused by Operation Modes Switching¶

Speaker: Ying Xu (Huazhong University of Science and Technology)

3LP6-05_Xu Ying.pdf

13:34 3LP6-06 Design of a 30-K/4-kJ Solid Nitrogen Cooled HTS Magnet¶

Speaker: Timing Qu (Tsinghua University)

4LP1-10_Qu Timing.pdf

13:35 3LP6-07 Thermal Analysis of Superconducting Magnetic Energy Storage Sytems Using Finite Elements Mehod¶

Speaker: Serhat Tunc (Istanbul University Department of Physics)

13:36 3LP6-09 Conceptual Design and Evaluation of a MW-Class SMES-BES DVR System¶

Speaker: Zixuan Zheng (Sichuan University)

13:37 3LP6-11 A method for quench detection in inductive superconducting fault current limiters of transformer type¶

Speaker: Joao Murta-Pina (Centre of Technology and Systems (Uninova))

13:38 3LP6-12 AC-Loss Measurements and Detailed Loss Analysis on a 1MVA-Class Superconducting Fault Current Limiting Transformer¶

Speaker: Sebastian Hellmann (Karlsruhe Institute of Technology)

3LP6-12_Hellmann Sebastian.pdf

13:39 3LP6-13 Field test of a 1MVA/1MJ Superconducting Fault Current Limiter-Magnetic Energy Storage System¶

Speaker: Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:40 3LP6-14 2.5 kVA Single- Phase Self-Limiting Transformer Using Magnetic Flux Transfer¶

Speaker: Ercan Ertekin (Ankara University)

13:41 3LP6-15 Current Limiting Characteristics using Double Quench of Transformer Type SFCL with Additional Secondary Winding¶

Speaker: Sung-Hun Lim (Soongsil University)

13:42 3LP6-16 Design and Evaluation of SMES-Battery Energy Storage System for Smoothing Mode Transfer of a Micro-Grid between Grid-Connected and Islanded Conditions¶

Speaker: Lei Chen (Wuhan University)

3LP6-16_Chen Lei.pdf

13:30 → 15:30 Poster : 3LP7 - Power transmission and cables¶

13:30 3LP7-01 Design Optimization of a Superconducting Gas-Insulated Transmission Line¶

Speaker: Sastry Pamidi (Center for Advanced Power Systems)

3LP7-01_Cheetham Peter.pdf

13:31 3LP7-02 Influence of cabling on current carrying properties of MgB2 superconductors¶

Speaker: Sergey Fetisov (Russian Scientific R&D Cable Institute)

3LP7-02_Vysotsky Vitaly.pdf

13:32 3LP7-03 Technology Collaboration Program on High Temperature Superconductivity (HTS): how HTS applications may influence international standardization activity¶

Speaker: Giuliano Angeli (Ricerca sul Sistema Energetico - RSE S.p.A.)

3LP7-03_Angeli Giuliano.pdf

13:33 3LP7-04 Advances in the First Brazilian Project on HTS Power Cable¶

Speaker: Marcelo Neves (LMDS / UFRRJ (Federal Rural University of Rio de Janeiro))

13:34 3LP7-05 Computational simulation of thermal behavior of a Cold Dielectric HTS Power Cable¶

Speaker: Edson da Silva (LMDS/Physics Department/UFRRJ)

13:35 3LP7-06 Efficient numerical modelling of superconducting power cables – A comparative study between 2D and 3D numerical models¶

Speaker: Min Yao (Institute of Energy System, School of Engineering, the University of Edinburgh)

13:36 3LP7-07 Simulation and test of the compact 2G HTS power cable model¶

Speaker: Sergey Fetisov (Russian Scientific R&D Cable Institute)

3LP7-07_Vysotsky Vitaly.pdf

13:37 3LP7-08 Fault Current Investigations of a concentric three-phase HTS Cable connected to a SFCL Device¶

Speaker: Wescley Tiago Batista de Sousa (Karlsruher Institut für Technologie / Institut für Technische Physik)

3LP7-08_Batista de Sousa Wescley Tiago.pdf

13:38 3LP7-09 A 3D quench model for high temperature superconductor CORC cable based T-A formulation¶

Speaker: Zixuan Zhu (University of Bath)

13:39 3LP7-10 Design Comparisons of concentric three-phase HTS Cables¶

Speaker: Dustin Kottonau (Karlsruhe Institute of Technology / Institute for Technical Physics)

13:40 3LP7-11 Short circuit test results of 22kV HTS triaxial superconducting bus¶

Speaker: Kazuhisa Adachi (SWCC showa cable systems co., ltd)

13:41 3LP7-12 Comparative Analysis of Finite Element Method and Volume Element Method for Thermal Modeling of Superconducting DC Transmission Systems¶

Speaker: Dimitrios Doukas (Eidikos Logariasmos Kondilion Erevnas A.P.TH)

3LP7-12_Doukas Dimitrios.pdf

13:42 3LP7-13 The Model Development and Power System Analysis of HVDC system in Jeju Island with DC 80kV HTS¶

Speaker: Eunyoung Ko (Korea Electrotechnology Research Institute)

13:43 3LP7-15 Multi-Terminal DC Transmission Systems based on Superconducting Cables Feasibility Study, Modeling and Control¶

Speaker: Dimitrios Doukas (Eidikos Logariasmos Kondilion Erevnas A.P.TH)

3LP7-15_Doukas Dimitrios.pdf

13:44 3LP7-16 Comparisons between Simulations and Experimental Results of 66kV 40m model HTS Power Cable in Short-circuit Current Accidents¶

Speaker: Daichi Horita (WASEDA University)

13:45 3LP7-18 System Apparatus And Methods For A 4k (Stochastic) Superduct¶

Speaker: Charles Janeke (Constellation Dynamics LLC)

13:46 3LP7-19 UK’s 1st feasibility study of using superconducting cables in electricity distribution networks¶

Speaker: Weijia Yuan (University of Bath)

13:47 3LP7-20 3-D Numerical Modelling of AC losses in MgB2 wires for the 10 kA demonstrator of BEST PATHS¶

Speaker: Guillaume Escamez (NEXANS/SuperGRID)

13:48 3LP7-21 Safety verification of 275kV HTS Cable System in Short-current Accidents¶

Speaker: Yusuke Yokoo (Waseda University)

13:49 3LP7-24 A new proposal of Terminations for HTS Power Cables¶

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

13:50 3LP7-26 Electro-mechanical performance of 18-strand MgB2 cables for the Superconducting Link Project at CERN¶

Speaker: Konstantina Konstantopoulou (CERN)

3LP7-26_Konstantopoulou Konstantina.pdf

13:51 3LP7-27 Development of MgB2 cable conductors for very high power HVDC transmission within the Best Paths project¶

Speaker: Christian-eric Bruzek (Nexans France)

13:52 3LP7-28 Effective pumping of long HTS power transmission line insulated with heat radiation shield¶

Speaker: Yury Ivanov (Chubu University)

13:53 3LP7-29 Suitable cable structure of HTS tri-axial cable cooled by counter flow cooling method for long-distance power transmission¶

Speaker: Daisuke Miyagi (Tohoku University)

13:54 3LP7-30 An Improved Starting Strategy for a Spherical Superconducting Rotor¶

Speaker: Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:55 3LP7-31 World first commercial project for applying superconducting cable system in Korea¶

Speaker: Cheolhwi Ryu (LS Cable&System Ltd.)

13:30 → 15:30 Poster : 3MP1 - Flux Pinning Cuprates¶

13:30 3MP1-02 Flux pinning in REBCO-based coated conductors probed by correlation of Jc and N-value¶

Speaker: Mayraluna Lao (Karlsruhe Institute of Technology)

13:31 3MP1-03 Influence of antidots on transport characteristics of HTSC¶

Speaker: Anna Moroz (National Research Nuclear University MEPhI)

3MP1-03_Moroz Anna.pdf

13:32 3MP1-04 Pinning, dissipation and anisotropy in nanostructured YBa2Cu3O7-x from microwave measurements.¶

Speaker: Enrico Silva (Universita` Roma Tre)

13:33 3MP1-05 Tunable pinning effects produced by non-uniform antidot arrays in YBCO thin films¶

Speaker: Antony Jones (Commonwealth Scientific and Industrial Research Organisation)

3MP1-05_Jones Antony.pdf

13:34 3MP1-06 Investigation of the longitudinal magnetic field effect in REBa2Cu3Oy films with various particulate artificial pinning centers¶

Speaker: Kazuki Sugihara (Nagoya University)

13:35 3MP1-07 Analysis of properties of 2G HTS tapes operating under DC magnetic field generated by permanent magnets¶

Speaker: Krzysztof Habelok (Silesian University of Technology)

13:36 3MP1-08 Vortex Dynamics in SmBa2Cu3Oy Films with BaHfO3 Nanorods as Correlated Artificial Pinning Centers¶

Speaker: Yuji Tsuchiya (Nagoya Univ.)

13:37 3MP1-09 Physical Properties of Nanostructured, Liquid Assisted Grown, Epitaxial YBa2Cu3O7-x Superconducting Films¶

Speaker: Juri Banchewski (Institut de Ciència de Materials de Barcelona (ICMAB-CSIC))

13:38 3MP1-10 The post-annealing effect of GdBa2Cu3O7-δ coated conductors on the pinning properties via a RCE-DR process¶

Speaker: Insung Park (Seoul National University)

13:39 3MP1-11 "Is Surface Decoration The New Black?" A Comparison Between Surface Decoration And Artificial Pinning Centers¶

Speaker: Achille Angrisani Armenio (ENEA)

13:40 3MP1-13 The effect of Nd2O3 addition on the magnetic properties of bulk single grain YBCO synthesized by Top Seeded Infiltration and Growth¶

Speaker: Talal A. Aljohani (Excellence Centre for Advanced Materials and Manufacturing, King Abdulaziz City for Science and Technology (KACST))

13:41 3MP1-14 Universal Scaling Of The Self-Field Critical Current From Single-Atomic Layer To Millimetre-Scale Superconductors¶

Speaker: Evgeny Talantsev (Victoria University of Wellington)

13:42 3MP1-15 YBa2Cu3O7-x nanocomposite films by CSD-ultrafast Transient Liquid Assisted Growth¶

Speaker: Júlia Jareño Cerulla (Institut de Ciències dels Materials de Barcelona (ICMAB-CSIC))

3MP1-15_Jareño Cerulla Júlia.pdf

13:43 3MP1-18 The High-Field, Strain Dependence of the Critical Current in GdBa2Cu3O7-x SuNAM Coated Conductors for Fusion Applications¶

Speaker: Jack Greenwood (University of Durham, Department of Physics)

3MP1-18_Greenwood Jack.pdf

13:44 3MP1-19 Influence of growth temperature and oxygen pressure on transport properties of BHO-doped REBCO(RE=Gd, Y) superconducting thin films¶

Speaker: Ruslan Popov (KIT)

13:45 3MP1-20 Critical Current And Vortex Flux Pinning Properties in YBa2Cu3O7-x Films with Ba2YTaO6 + Ba2YNbO6 Nano-inclusions By DC Transport And Microwave Measurements¶

Speaker: Anna Frolova (Roma Tre University)

13:46 3MP1-21 Influence of micron range artificial defects on critical current of 2G HTS tapes¶

Speaker: Sergei Pokrovskii (NRNU MEPHI)

13:47 3MP1-22 Critical current anisotropy in commercial coated conductors at higher temperatures¶

Speaker: Eugen Seiler (Institute of Electrical Engineering)

13:30 → 15:30 Poster : 3MP2 - Non-Cuprate Thin Films¶

13:30 3MP2-02 EBSD analysis of surface texture quality of oxide thin films in coated conductors¶

Speaker: Yue Zhao (Shanghai Jiao Tong University)

13:31 3MP2-03 Epitaxial (001) SrTiO3 films on Cu-based substrates by PLD under reducing atmosphere for YBCO Coated Conductor¶

Speaker: Elena Xuriguera (Universitat de Barcelona)

13:32 3MP2-05 Surface Flashover Characteristics of PPLP According to Its Orientation in Cryogenic Environment¶

Speaker: Jin-Yong Na (Hanyang university)

13:33 3MP2-06 Comparison of AC and DC Breakdown Characteristics of PPLP in LN2 Considering Corona Inception Voltage¶

Speaker: Ryul Hwang (Hanyang university)

13:34 3MP2-07 Synthesis of superconductive TaN films using DC reactive sputtering deposition¶

Speaker: Amanda Nieto (CENTRO DE INVESTIGACION CIENTIFICA Y DE EDUCACION SUPERIOR DE ENSENADA, BAJA CALIFORNIA)

13:35 3MP2-08 Influence of surface faceting of RABiT-type metallic substrate on epitaxial film growth¶

Speaker: Giuseppe Celentano (ENEA)

13:36 3MP2-09 Growth of biaxially-textured La2Zr2O7 and Zr-doped CeO2 on cold-rolled Ni-W substrate by CSD¶

Speaker: Angelo Vannozzi (ENEA)

13:37 3MP2-10 Influence of the inhomogeneous properties of a superconducting film on the penetration of the magnetic flux¶

Speaker: Loïc Burger (Department of Electricity, Electronics, and Computer Science of the University of Liège)

13:38 3MP2-11 Effect of homoepitaxial MgO films on the growth of CeO2 films by pulsed laser deposition¶

Speaker: Wei Wang (School of Physics and Astronomy, Shanghai Jiao Tong University)

3MP2-11_Wang Wei.pdf

13:39 3MP2-12 Preparation and characterization of Bi2Se3 films grown on FeSe2 by pulsed laser deposition¶

Speaker: Ming Lei (Southwest Jiaotong University)

3MP2-12_Lei Ming.pdf

13:40 3MP2-14 Topological quantum phase transition and superconductivity induced by pressure in the bismuth tellurohalide BiTeI¶

Speaker: Yanpeng Qi (Max Planck Institute for Chemical Physics of Solids)

13:41 3MP2-16 Novel Platinum-Based Superconductor LaPt5As with Unique Crystal Structure¶

Speaker: Masaya Fujioka (University of Hokkaido)

13:42 3MP2-17 Research on Electrical Performance of Impregnating Resin Material for Superconducting Magnet¶

Speaker: Yanfang Yang (China Electric Power Research Institute)

13:43 3MP2-18 Thermal conductivity AlN/epoxy composites for superconducting magnets¶

Speaker: Teng Zhang (Beijing Jiaotong University)

13:44 3MP2-19 Electromagnetic characterization of a new dielectric for High-Tc Power Cable¶

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

13:45 3MP2-20 Application of metamaterial nano-engineering for increasing the superconducting critical temperature¶

Speaker: Michael Osofsky (Materials Science and Technology Division, Naval Research Laboratory)

3MP2-20_Osofsky Michael.pdf

13:46 3MP2-21 Electron-beam evaporated superconducting titanium thin films for antenna coupled transition edge sensors¶

Speaker: Zheng Wang (Purple Mountain Observatory, Chinese Academy of Sciences)

13:30 → 15:30 Poster : 3MP3 - Cuprate Bulk¶

13:30 3MP3-01 Influence of doping on electrical and thermal properties of Dy0.95Pr0.05Ba2Cu2.94M0.06O7-δ (M = Fe, Ni, Zn and Mn)¶

Speaker: Ashok Rao (Manipal Institute of Technology, Manipal University)

13:31 3MP3-02 Batch processing of single-domain YBCO bulks with artificial holes¶

Speaker: Tomáš Hlásek (CAN SUPERCONDUCTORS s.r.o.)

13:32 3MP3-03 GdBCO single grain bulk superconductor via 2-step top seeded infiltration and growth process¶

Speaker: Devendra Kumar Namburi (UNIVERSITY OF CAMBRIDGE)

13:33 3MP3-04 Effects of Cu substitution for Nb in NbSr2RECu2Oz (z~8; RE: rare-earth element)¶

Speaker: Toshihiko Maeda (Kochi University of Technology)

13:34 3MP3-06 Effect of AuBr3 Doping on the Superconducting Properties of Hg-based Superconductors¶

Speaker: Ioseb Metskhvarishvili (Ilia Vekua Sukhumi Institute of Physics and Technology, Laboratory of Cryogenic Technique and Technologies)

13:35 3MP3-07 Production of polycrystalline superconducting ceramic nanowires, using the Solution Blow Spinning technique¶

Speaker: Rafael Zadorosny (UNESP - Ilha Solteira)

3MP3-07_Zadorosny Rafael.pdf

13:36 3MP3-08 Microstructure of IG-processed YBCO¶

Speaker: Michael Koblischka (Saarland University)

13:37 3MP3-09 Raman Characterisation of Melt-Textured Gd1212 Superconductors in the Normal State.¶

Speaker: Marcello Gombos (CNR-IMM UoS Napoli)

13:38 3MP3-10 Influence of CeO2, La2O3 and Sm2O3 additions on the Microstructure and Properties of YBCO Bulk Superconductors Prepared by TSIG Process¶

Speaker: Liudmila Vojtkova (Institute of Experimental Physics, Slovak Academy of Sciences)

13:39 3MP3-11 Addressing the challenge of bar shaped bulk REBCO superconductors¶

Speaker: Yunhua Shi (Engineering Department, University of Cambridge)

13:40 3MP3-12 The Influence of Gd Addition on the Microstructure and Superconducting Properties of YBCO Bulk Superconductors¶

Speaker: Daniela Volochová (Institute of Experimental Physics SAS)

13:41 3MP3-13 Characterization of liquid phase on production of single grain bulk GdBa2Cu3Oy superconductors grown by IG process¶

Speaker: Yuta Nakanishi (Shibaura Institute of Technology)

13:42 3MP3-14 Influence of Sm Doping on YBCO Bulks in Y123/Y211 System¶

Speaker: Monika Radušovská (Institute of Experimental Physics SAS)

13:43 3MP3-15 YBCO bulk production via a novel preparation technique for applications¶

Speaker: Ercan Ertekin (Ankara University)

13:44 3MP3-16 Change of superconducting properties of single grain Sm-Ba-Cu-O bulk by Sm/Ba substitution effect¶

Speaker: Petra Hajdová (Institute of Experimental Physics SAS)

13:45 3MP3-17 Effect of Different Preperation Techniques and re-pelletization Procedure on the Structural, Mechanical and Superconducting Properties of BSCCO Superconductors¶

Speaker: Hamit Öztürk (Ankara University 50. Year Campus)

13:46 3MP3-18 Effect of Nd(422) Dopant on the Superconducting Properties of Nd(123) Superconductor Melt-processed in Air¶

Speaker: Ahmed Mahmoud (Department of physics,Faculty of Science,University of Tripoli)

13:47 3MP3-20 Laser induced circular texture in Bi-2212 bulk¶

Speaker: Elena Martínez (ICMA (CSIC-University of Zaragoza))

3MP3-20_Amaveda Hippolite.pdf

13:30 → 15:30 Poster : 3MP4 - Bi-Based wired and LTS Materials¶

13:30 3MP4-01 Strong HTS wires based on the Bi2212 superconductor¶

Speaker: Alexander Otto (Solid Material Solutions, LLC)

13:31 3MP4-02 BOST progress on Bi-2212 round wire fabrication for high field magnet applications¶

Speaker: Yibing Huang (Bruker-OST)

13:32 3MP4-03 Overpressure densification of 2212 round wires before solenoid coil winding for higher winding pack stability and higher JW¶

Speaker: Maxime Matras (CERN)

3MP4-03_Matras Maxime.pdf

13:33 3MP4-04 Investigation of inter-grain critical current density in Bi-2212 superconducting wires through Jc(B,T) measurements¶

Speaker: Alessandro Leveratto (CNR-SPIN)

13:34 3MP4-05 Axial tensile stress-strain characterization of Bi-2212 round wire with different heat treatment pressures¶

Speaker: Jinggang Qin (Institute of Plasma Physics, CAS and ASIPP)

13:35 3MP4-07 Experimental Investigation of Bi-2223/Ag Superconducting Tape Joints¶

Speaker: Yuta Ebara (Sumitomo Heavy Industries, Ltd./ Engineering Physics Dept. / Technology Research Center)

13:36 3MP4-09 Investigations on the enhancement of the critical current density in Nb3Sn superconductors by internally oxidized ZrO2 particles¶

Speaker: Florin Buta (Universisty of Geneva, DQMP)

13:37 3MP4-11 Growth Rate and Morphology of Nb3Sn Layers in ITER-type Bronze-Processed Wires under Different Diffusion Annealing Regimes¶

Speaker: Evgeniya Valova-Zaharevskaya (M.N. Miheev Institute of Metal Physics of Ural Branch of Russian Academy of Sciences)

3MP4-11_Valova-Zaharevskaya Evgeniya.pdf

13:38 3MP4-12 Effect of initial Nb billet conditions on the strain hardening of Nb filaments in Nb3Sn strand for FCC¶

Speaker: Iksang Shin (KAT)

13:39 3MP4-14 Microstructure and superconducting properties of bronze-processed Nb3Sn layer using Cu-Sn-In ternary matrix¶

Speaker: Yoshimitsu Hishinuma (National Institute for Fusion Science)

13:40 3MP4-15 A Study on the High Jc Nb3Sn Strand Manufacturing Process¶

Speaker: Soobok Yoon (KAT)

13:41 3MP4-16 Effect of Sn concentration in bronze matrix on the pre-reaction formation of Nb3Sn layers in bronze-processed superconducting strands of different design¶

Speaker: Irina Deryagina (M.N. Miheev Institute of Metal Physics, Ural Branch of RAS (IMP, UB RAS))

3MP4-16_Deryagina Irina.pdf

13:42 3MP4-17 Lattice dynamics and compressibility on Nb3Sn at high pressure by a multitechnique approach¶

Speaker: Rita Loria (Science Department, University Roma Tre, Rome, Italy)

13:43 3MP4-18 Role of Ti on critical current density-dependent metallurgical aspects of A15-based superconductors by bronze method¶

Speaker: Sangeeta Santra (University of Oxford)

13:44 3MP4-19 Lead-free persistent mode joints between NbTi wires¶

Speaker: Timothy Davies (Department of Materials, University of Oxford)

13:45 3MP4-20 Ternary Molybdenum Chalcogenide superconducting wires for ultra-high field applications¶

Speaker: Bernd Seeber (University of Geneva, now scMetrology SARL)

3MP4-20_Seeber Bernd.pdf

13:46 3MP4-21 Effect of overpressure heat treatment on the microstructure and the current-carrying capacity of Bi-2212 wires¶

Speaker: Qingbin Hao (Northwest Institute for Nonferrous Metal Research)

13:30 → 15:30 Poster : 3MP5 - Magnetization and Trapped Field + AC Losses 2/2¶

13:30 3MP5-01 Model for the response of superconducting/ferromagnetic structures subjected to crossed fields¶

Speaker: Benoit Vanderheyden (University of Liege)

13:31 3MP5-02 Waveform control pulse magnetization for HTS bulk with flux jump¶

Speaker: Tetsuya Ida (Tokyo University of Marine Science and Technology)

13:32 3MP5-03 Creep and relaxation phenomena in a long MgB2 tube subjected to transversal magnetic field, at 4.2 K¶

Speaker: Giovanni Giunchi (Materials Science Consultant)

13:33 3MP5-04 Magnetic shielding properties of superconducting and superconducting/ferromagnetic superimposed systems¶

Speaker: Laura Gozzellino (Politecnico di Torino, Department of Applied Science and Technology)

3MP5-04_Gozzellino Laura.pdf

13:34 3MP5-05 Magnetic shielding at 1 T: achievements of machinable MgB2¶

Speaker: Laura Gozzelino (University of Torino)

3MP5-05_Truccato Marco.pdf

13:35 3MP5-07 Flux jump assisted pulsed field magnetisation in a portable magnet system¶

Speaker: Difan Zhou (University of Cambridge)

3MP5-07_Zhou Difan.pdf

13:36 3MP5-08 Three-dimensional modelling and experiments of cross-field demagnetization in cubic bulks¶

Speaker: Milan Kapolka (Institute of Electrical Engineering, SAS)

3MP5-08_Kapolka Milan.pdf

13:37 3MP5-09 Three-dimensional numerical modeling of a superconducting cube: benchmarking confirms non-rectangular current paths¶

Speaker: Francesco Grilli (Slovak Academy of Sciences)

3MP5-09_Kapolka Milan.pdf

13:38 3MP5-10 Pulse Magnetization of Jointless Superconducting Loops for Magnetic Bearings Height Control¶

Speaker: Rubens de Andrade Junior (Federal University of Rio de Janeiro)

3MP5-10_Santos da Cruz Vagner.pdf

13:39 3MP5-11 Dependence of the trapped magnetic flux density of YBCO pellets on mechanical stress¶

Speaker: Bruno Douine (Universidad Nacional Autonoma de Mexico)

13:40 3MP5-12 Demagnetisation study of pulse-field magnetised superconducting bulks¶

Speaker: Jan Srpcic (University of Cambridge)

3MP5-12_Srpcic Jan.pdf

13:41 3MP5-13 Modifying the Pulsed-Field-Magnetization Technique for HTS Bulks in Electrical machines and Without Magnetic Field Sensors¶

Speaker: João Arnoud (Instituto Superior Técnico (IST) - University of Lisbon)

3MP5-13_Arnoud João.pdf

13:42 3MP5-14 Inverse B-J models for determining current distributions in magnetised bulk superconductors¶

Speaker: Fernando Perez (Bulk Superconductivity Group, Department of Engineering, University of Cambridge)

13:43 3MP5-15 AC losses in MgB2 wires and tapes in frequencies up to 18 kHz¶

Speaker: Yasha Nikulshin (Bar Ilan University)

13:44 3MP5-16 Measurement and Analysis of the Dynamic Effects in an HTS Dipole Magnet¶

Speaker: Carlo Petrone (CERN)

15:30 → 15:50 Coffee Break

15:50 → 18:05 3EO2 - Super conducting Photon Dectetors¶

15:50 3EO2-01 Superconducting Nanowire Single-Photon Detector as a Key Element for Quantum Photonic Integrated Circuits¶

Speaker: Gregory Goltsman (Moscow State Pedagogical University)

3EO2-01_Gregory Goltsman_Room 3+4.pdf

16:05 3EO2-02 Bistable 10 nm thick YBa2Cu3O7-δ nanowires as new materials for single photon detectors¶

Speaker: Riccardo Arpaia (Chalmers University of Technology)

3EO2-02_Riccardo Arpaia_Room 3+4.pdf

16:20 3EO2-03 Photoresponse of La1.85Sr0.15CuO4 nanostrip¶

Speaker: Hiroyuki Shibata (Kitami Institute of Technology)

3EO2-03_Hiroyuki Shibata_Room 3+4.pdf

16:35 3EO2-04 Optically probing the detection mechanism in a molybdenum silicide superconducting nanowire single-photon detector¶

Speaker: Misael Caloz (Universite de Geneve (CH))

3EO2-04_Misael Caloz_Room 3+4.pdf

16:50 3EO2-05 THz Heterodyne Detectors Based on MgB2 Thin Films¶

Speaker: Boris Karasik (Jet Propulsion Laboratory)

3EO2-05_Boris Karasik_Room 3+4.pdf

17:05 3EO2-06 Kinetic inductance bolometer arrays for security screening applicatoins¶

Speaker: Juha Hassel (VTT Technical Research Centre of Finland)

3EO2-06_Juha Hassel_Room 3+4.pdf

17:20 3EO2-07 SNSPD Array Based on MgF2 Substrate for Laser Ranging of Targets in Space¶

Speaker: Labao Zhang (Research Institute of Superconductor Electronics of Nanjing University)

3EO2-07_Labao Zhang_Room 3+4_no_indico.pdf

17:35 3EO2-08 Realization of the Resonant Cold-Electron Bolometer (RCEB) with a Kinetic Inductance Nanofilter for Multichroic Pixels¶

Speaker: Leonid Kuzmin (Chalmers University of Technology)

3EO2-08_Leonid Kuzmin_Room 3+4.pdf

15:50 → 18:05 3LO4 - Power Transmission Lines and Cables¶

15:50 3LO4-01 Recent status and progress on the HTS applications of AC and DC power transmission¶

Speaker: Minwon Park (Changwon National University)

3LO4-01_Minwon Park_Room 1.pdf

16:20 3LO4-02 The Supernet NL Project: The Netherlands High Voltage HTS Cable Project¶

Speaker: Babak Gholizad (TenneT TSO)

3LO4-02_Babak Gholizad_Room 1.pdf

16:35 3LO4-03 The second cooling test of 1000-meter superconducting DC cable system in Ishikari¶

Speaker: Noriko Chikumoto (Chubu University)

3LO4-03_Noriko Chikumoto_Room 1.pdf

16:50 3LO4-04 Protection against the ground fault for 275 kV HTS cable and the experiment¶

Speaker: Tomohiro Takagi (Furukawa Electric co., ltd.)

3LO4-04_Tomohiro Takagi_Room 1.pdf

17:05 3LO4-05 Three years operation experience of the AmpaCity system installation in Essen, Germany¶

Speaker: Jean-Maxime Saugrain (Nexans Deutschland GmbH)

3LO4-05_Jean-Maxime Saugrain_Room 1.pdf

17:20 3LO4-06 Status of the MgB2-based high-power DC cable demonstrator within BEST PATHS¶

Speaker: Christian-eric Bruzek (Nexans France)

3LO4-06_Christian-Eric Bruzek_Room 1.pdf

17:35 3LO4-07 3S – Superconducting DC-Busbar for High Current Applications¶

Speaker: Steffen Elschner (University of Applied Science Mannheim)

3LO4-07_Steffen Elschner_Room 1.pdf

17:50 3LO4-08¶

15:50 → 18:05 3MO3 - Cuprate Thin films¶

15:50 3MO3-01 Surface diffusion constants and supersaturations in SmBCO films prepared by pulsed laser deposition method at various deposition conditions¶

Speaker: Yusuke Ichino (Nagoya University)

3MO3-01_Yusuke Ichino_Room 2.pdf

16:05 3MO3-02 Transport properties and granular properties relation in YBCO and composite YBCO films determined by means of synchrotron X-ray diffraction¶

Speaker: Andrea Augieri (ENEA-FSN)

3MO3-02_Andrea Augieri_Room 2.pdf

16:20 3MO3-03 Mechanisms of novel transient liquid assisted growth for ultrafast production of YBa2Cu3O7-x thin films¶

Speaker: Laia Soler Bru (Institut de Ciència de Materials de Barcelona (CSIC))

3MO3-03_Laia Soler Bru_Room 2.pdf

16:35 3MO3-04 Preparation of superconducting GdBa2Cu3O7-x-BaHfO3 nanocomposite films by CSD with improved electrical performances¶

Speaker: PABLO CAYADO (Karlsruhe Institute of Technology (KIT))

3MO3-04_Pablo Cayado_Room 2.pdf

16:50 3MO3-05 Influence of granularity on the local transport properties in pure and BaHfO3 doped YBCO films on technical templates¶

Speaker: Ruben Hühne (IFW Dresden)

3MO3-05_Ruben Hühne_Room 2.pdf

17:05 3MO3-06 Ionic liquid gating of YBa_2Cu_3O_{7-x} grain boundaries¶

Speaker: Alexandre Fête (University of Geneva - DQMP)

3MO3-06_Alexandre_Fete_Room_2.pdf

17:20 3MO3-07 Study of Tl(1223) superconducting coatings for beam impedance mitigation in the Future Circular Collider¶

Speaker: Dr Emilio Bellingeri (CNR-SPIN)

FCC_Eucas.pdf

17:35 3MO3-08 Development of a fluorine-free polymer-assisted-deposition route for YBa2Cu3O7-x superconducting films¶

Speaker: Mircea Nasui (Technical University of Cluj-Napoca)

3MO3-08_Mircea Nasui_Room 2.pdf

17:50 3MO3-09 Control of Jc anisotropy in REBCO thin film with nanoscale Y211 inclusions¶

Speaker: Alok K. Jha (Kyushu Institute of Technology)

3MO3-09_Alok K. Jha_Room 2.pdf

Thursday 21 September ¶

08:00 → 09:50 4LO1 - SRF¶

08:00 4LO1-01 Industrial fabrication and surface treatment of superconducting RF cavities: challenge and main lesson¶

Speaker: Paolo Michelato (INFN MIlano)

4LO1-01_Paolo Michelato_Room 1.pdf

08:30 4LO1-02 Path forward for economic and high performance SRF accelerator structures¶

Speaker: Ganapati Myneni (Jefferson Lab)

4LO1-02_Ganapati Myneni_Room 1.pdf

08:45 4LO1-03 Superconducting RF and Magnet Technologis for International Linear Collider¶

Speaker: Prof. Akira Yamamoto (KEK and CERN)

4LO1-03_Akira Yamamoto_Room 1.pdf

09:00 4LO1-04 Superconducting RF at CERN: operation, projects, and R&D¶

Speaker: Frank Gerigk (CERN)

4LO1-04_Frank Gerigk_Room 1.pdf

09:15 4LO1-05 Alternative Coating Techniques and Materials for SRF Cavities¶

Speaker: Guillaume Jonathan Rosaz (CERN)

4LO1-05_Guillaume Rosaz_Room 1.pdf

09:30 4LO1-06 Dislocation substructures, and low temperature N doping impact on flux penetration and trapping in SRF Nb¶

Speaker: Peter Lee (Florida State University)

4LO1-06_Peter Lee_Room 1.pdf

08:00 → 09:50 4MO1 - Bi-based and A15 Materials¶

08:00 4MO1-01 Key parameters for strong a-axis grain growth in narrow filament cavities of Bi-2212 round wires¶

Speaker: Fumitake Kametani (NHMFL Tallahassee US)

4MO1-01_Fumitake Kametani_Room 2.pdf

08:15 4MO1-02 High-Field Thermal Conductivity of OP Bi-2212 wires¶

Speaker: Marco Bonura

4MO1-02_Marco Bonura_Room 2.pdf

08:30 4MO1-03 Improved critical current density in recent Bi-2212 round wires¶

Speaker: Jianyi Jiang (Florida State University)

4MO1-03_Jianyi Jiang_Room 2_indico.pdf

08:45 4MO1-04 Effects of element addition into Cu matrix for IT-processed Nb3Sn wires¶

Speaker: Nobuya Banno (National Institute for Materials Science)

4MO1-04_Nobuya Banno_Room 2_indico.pdf

09:00 4MO1-05 Refining the Grain Size in Nb3Sn conductor in Hyper Tech¶

Speaker: Matt Rindfleisch (Hyper Tech Research)

4MO1-05_Matt Rindfleisch_Room 2.pdf

09:15 4MO1-06 New Nb3Al superconducting wires with Ta-Ni interfilament matrix¶

Speaker: Akihiro Kikuchi (National Institute for Materials Science)

4MO1-06_Akihiro Kikuchi_Room 2.pdf

09:30 4MO1-07 New understanding of Nb3Sn doping for strand performance improvement¶

Speaker: Chiara Tarantini (ASC-NHMFL, Florida State University)

4MO1-07_Chiara Tarantini_Room 2.pdf

08:00 → 09:50 4MO2 - MgB2¶

08:00 4MO2-01 Improvement in microstructure and critical current density of in situ PIT MgB2 wires by cold working with a swaging machine¶

Speaker: Hiroaki Kumakura (National Institute for Materials Science)

4MO2-01_Hiroaki Kumakura_Room 3+4.pdf

08:30 4MO2-02 Copper stabilized dense MgB2 wires fabricated by two types of methods: mechanical milling and internal magnesium diffusion¶

Speaker: Motomune Kodama (Hitachi, Ltd. Research & Development Group)

4MO2-02_Motomune Kodama_Room 3+4.pdf

08:45 4MO2-03 Electro-mechanical studies of MgB2 wires and cables prepared by different processes.¶

Speaker: Pavol Kovac (Institute of Electrical Engineering of SAS)

4MO2-03_Pavol Kovac_Room 3+4.pdf

09:00 4MO2-04 Rapid synthesis of MgB2 bulks by inductive heating¶

Speaker: Davide Matera

4MO2-04_Davide Matera_Room 3+4.pdf

09:15 4MO2-05 High Trapped Fields in C-doped Mg(B1-xCx)2 Bulk Superconductors Fabricated by Infiltration and Growth¶

Speaker: Ashutosh Bhagurkar (Brunel University)

4MO2-05_Ashutosh Bhagurkar_Room 3+4.pdf

09:30 4MO2-06 MgB2 round wires for the high-power superconducting cable demonstrator in the Best Paths project¶

Speaker: Matteo Tropeano (Columbus Superconductors, SpA)

4MO2-06_Matteo Tropeano_Room 3+4.pdf

09:50 → 10:15 Coffee Break

10:15 → 12:15 Poster : 4EP1 - SQUID Applications and detectors¶

10:15 4EP1-01 Scaling Properties of YBCO SQAs¶

Speaker: Susan Berggren (Space and Naval Warfare Systems Center Pacific)

10:16 4EP1-02 Towards practical HfTi-nanoSQUID sensors¶

Speaker: Sylke Bechstein (Physikalisch-Technische Bundesanstalt)

4EP1-02_Bechstein Sylke.pdf

10:17 4EP1-03 X-ray absorption fine structure spectrometer with superconducting-tunnel-junction array detector for light element impurities in heat resistant steels¶

Speaker: Masataka Ohkubo (AIST)

10:18 4EP1-04 Hot electron bolometer mixer for operation in the mid-infrared region¶

Speaker: Akira Kawakami (NICT)

4EP1-04_kawakami Akira.pdf

10:19 4EP1-05 Production of HTS-SQUID magnetometer with ramp-edge junctions exhibiting lowered noise in ac biasing mode¶

Speaker: Seiji Adachi (SUSTERA)

10:20 4EP1-07 Fabrication and Characterization of large High-Tc Superconducting Quantum Interference Filters¶

Speaker: Emma Mitchell (CSIRO Manufacturing)

10:21 4EP1-09 Design Map for bi-SQUIDs¶

Speaker: Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)

10:22 4EP1-10 Static and Radiofrequency magnetic response of High TC Superconducting Quantum Interference Filters made by ion irradiation¶

Speaker: Eliana Recoba Pawlowski (Thales Research and Technology)

10:23 4EP1-11 A practical SQUID system with two-stage readout scheme¶

Speaker: Guofeng Zhang (State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050, China)

10:24 4EP1-12 Practical-SQUID current sensors with nanometer-sized Nb-AlOx-Nb Josephson junctions¶

Speaker: Jan-Hendrik Storm (Physikalisch-Technische Bundesanstalt)

10:25 4EP1-13 Parameters characterization of all-NbN DC-SQUID magnetometer¶

Speaker: Liu Quansheng (SIMIT)

10:26 4EP1-14 Development of Microwave Kinetic Inductance Detectors with YBCO Spiral Resonators¶

Speaker: Seiichiro Ariyoshi (Toyohashi University of Technology)

10:27 4EP1-15 Superconducting Imager by means of a Delay Line Current-Biased Kinetic Inductance Detector¶

Speaker: Takekazu Ishida (Osaka Prefecture University)

10:28 4EP1-16 Low-Noise Series SQUID Array Amplifiers for¶

Speaker: Robin Cantor (STAR Cryoelectronics)

10:29 4EP1-17 Fe(Se,Te) Josephson junctions, dc-SQUIDs and nanostrips¶

Speaker: Carlo Ferdeghini (SPIN-CNR, Istituto Superconduttori)

10:30 4EP1-18 Investigation of three-dimensional digital circuits with nanometer Josephson junctions made by Focused Ion Beam¶

Speaker: Pascal Febvre (Université Savoie Mont Blanc)

4EP1-18_Febvre Pascal.pdf

10:31 4EP1-19 Investigation of the Harmonic Mixer and Low Frequency Converter Regimes in a Superconducting Tunnel Junction¶

Speaker: Konstantin Kalashnikov (Moscow Institute of Physics and Technology)

10:32 4EP1-20 Development of the devices for non-destructive testing based on SQUID systems.¶

Speaker: Konstantin Kalashnikov (Moscow Institute of Physics and Technology)

10:15 → 12:15 Poster : 4EP2 - Josephson Junctions and devices¶

10:15 4EP2-04 Metrology for Single Flux Quantum Electronics¶

Speaker: Adam Sirois (NIST-Boulder)

10:16 4EP2-07 Fabrication and evaluation of hetero-epitaxial multilayer for Nb/AlN/Nb junctions¶

Speaker: Yasuhiro Odashima (Yamagata University)

10:17 4EP2-08 Circuit Modification and Parameters Optimization for a High Frequency RSFQ T1FF¶

Speaker: Tahereh Jabbari (Electrical Engineering Department, Sharif University of Technology)

10:18 4EP2-09 Josephson junctions arrays of alternating S and N film parts¶

Speaker: Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)

10:19 4EP2-10 Resonances and phase locking in Josephson high-Q circuits¶

Speaker: Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)

10:20 4EP2-11 High-Tc Josephson junctions as quasiclassical THz detectors¶

Speaker: Yuriy Divin (Kotelnikov Institute of Radio Engineering and Electronics of Russian Academy of Sciences)

10:21 4EP2-12 Focused He+-Ion Beam Irradiated High Tc Josephson Junctions¶

Speaker: Francois Couedo (Physics and Materials Laboratory (LPEM), ESPCI-PSL-CNRS-UPMC)

10:22 4EP2-13 Restoration of Josephson Current by Applying Vertical Magnetic Field¶

Speaker: Atsushi Suzuki (Kanagawa University)

10:23 4EP2-14 Terahertz emission from electrode structure optimized Bi-2212 intrinsic Josephson junctions¶

Speaker: Teppei Uchida (Yamagata University)

10:24 4EP2-15 Josephson standards for a new AC quantum voltage infrastructure (in the scope of the ACQ-PRO EMPIR project)¶

Speaker: Paolo Durandetto (INRiM - Istituto Nazionale di Ricerca Metrologica)

4EP2-15_Durandetto Paolo.pdf

10:25 4EP2-16 Modulation characteristics of a Josephson current through Nb tunnel junction by a parallel magnetic field and a perpendicular magnetic field¶

Speaker: Norimichi Watanabe (Kanagawa University)

10:26 4EP2-17 Measurement of Specific Capacitance for Nb/Al-AlOx/Nb Josephson Tunnel Junctions¶

Speaker: Xiong Wei (Shanghai institute of microsystem and information technology)

10:27 4EP2-18 Measurement of thickness dependence of superconductivity in epitaxial NbN films¶

Speaker: Zhang Qiyu (Shanghai Institute of Microsystem and Information Technology)

10:28 4EP2-21 Quantum memcapacitance with transmon-resonator system¶

Speaker: Denys Karpov (B. Verkin ILTPE of NASU)

4EP2-21_Karpov Denys.pdf

10:29 4EP2-22 Josephson quantum DAC based on binary divided 1-V SNIS array¶

Speaker: Bruno Trinchera (INRIM - Istituto Nazionale di Ricerca Metrologica)

10:30 4EP2-23 Critical current scattering in series arrays of HTS SQUIDs based on ion-damaged barrier Josephson junctions¶

Speaker: Denis Crété (Unité Mixte de Physique CNRS/THALES)

4EP2-23_Crété Denis.pdf

10:31 4EP2-24 Megahertz Waveform Synthesis with the Josephson Arbitrary Waveform Synthesizer¶

Speaker: Justus Brevik (NIST Boulder)

10:15 → 12:15 Poster : 4LP1 - Accelerator magnets and cables¶

10:15 4LP1-01 An High Field Insert Accelerator Class Dipole Magnet Constructed with Roebel Multi-tape HTS Cable¶

Speaker: Glyn Kirby (CERN)

4LP1-01_Kirby Glyn.pdf

10:16 4LP1-02 Quench propagation in Nb3Sn cos-theta 11 T dipole model magnets in high stress areas¶

Speaker: Franco Julio Mangiarotti (CERN)

4LP1-02 poster.pdf

10:17 4LP1-03 Simulation of a Quench Event in the Reconfigured LHC Main Dipole Circuit Including the 11 T Magnets for the High-Luminosity Upgrade¶

Speaker: Alejandro Fernandez Navarro (CERN)

4LP1-03_Fernandez Navarro Alejandro.pdf

10:18 4LP1-04 Finite Element Analysis of the mechanical conditions in the Nb3Sn cable of the DS11T dipole magnet during operation¶

Speaker: Christian Löffler (CERN)

FEA of the mechanical conditions in the Nb3Sn cable of the DS11T dipole magn-POSTER.pdf

10:19 4LP1-05 Advanced Nb3Sn Conductors Tested in a Racetrack Coil Configuration for the 11T Dipole Project¶

Speaker: Hugo Bajas (CERN)

10:20 4LP1-06 Design of a 4 Tm forward superconducting dipole for the FCC-hh detector magnet system¶

Speaker: Erwin Bielert (University of Illinois at Urbana-Champaign (UIUC) and CERN)

10:21 4LP1-08 Measuring the Magnetic Center Behavior and Field of FRIB Superconducting Magnets¶

Speaker: Ge Zhengfu (XI’AN superconducting magnet technology co.，ltd)

10:22 4LP1-09 Process gas characterisation and control during Nb3Sn coil reaction heat treatment¶

Speaker: Christian Scheuerlein (CERN)

10:23 4LP1-10 Design and Testing of a Demonstration HTS dipole Magnet at 77 K¶

Speaker: Timing Qu (Tsinghua University)

10:24 4LP1-11 Trans National Access to CERN Superconducting Magnet Test Facility within the framework of EUCARD2¶

Speaker: Marta Bajko (CERN)

10:25 4LP1-13 Nitrogen Cryogenic System for the NICA Accelerator Complex at JINR¶

Speaker: Iuliia Mitrofanova (JINR)

4LP1-13_Mitrofanova Iuliia.pdf

10:26 4LP1-14 Compact common-coil design for a future collider¶

Speaker: Emmanuele Ravaioli (LBNL)

10:27 4LP1-15 Prototype of the short-period superconducting undulator with neutral poles: test results¶

Speaker: Nikolay Mezentsev (Budker Institute of Nuclear Physics)

10:28 4LP1-16 Construction and cold test of the superferric octupole for the LHC Luminosity upgrade¶

Speaker: Marco Statera (Istituto Nazionale di Fisica Nucleare)

4LP1-16_Statera Marco.pdf

10:29 4LP1-17 Assembly and test of the Nb3Sn dipole magnet FRESCA2¶

Speaker: Paolo Ferracin (CERN)

10:15 → 12:15 Poster : 4LP2 - Ancillaries and Technology¶

10:15 4LP2-01 Theoretical Expressions of Output Errors in Two Types of Superconducting Level Sensors¶

Speaker: Kazuhiro Kajikawa (Kyushu University)

10:16 4LP2-02 Strain measurements with Fiber Bragg Grating sensors in the short models of the HiLumi LHC Low-Beta Quadrupole Magnet MQXF¶

Speaker: Antonella Chiuchiolo (CERN)

10:17 4LP2-03 A three-dimensional measurement system for HTS magnetic levitation bearings¶

Speaker: Li Wanjie (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:18 4LP2-04 Determination of the N exponent of 2G HTS tapes from V-I curves using a thermally stabilized fast pulsed system¶

Speaker: Rubens de Andrade Junior (Universidade Federal do Rio de Janeiro)

4LP2-04_Barusco Pedro.pdf

10:19 4LP2-05 Instrumentation for laboratorial high current tests of 3-phase Cold Dielectric HTS Power Cable¶

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

4LP2-05_Neves Marcelo.pdf

10:20 4LP2-06 Novel rotating coil setup for definition of the magnetic field quality for XFEL magnets¶

Speaker: Yury Klimchenko (JSC «D.V.Efremov Institute of Electrophysical Apparatus» NIIEFA)

4LP2-06_Klimchenko Yury.pdf

10:21 4LP2-07 A Method for Monitoring Unbalanced Three-Phase HTS Cable Systems via Time-Frequency Domain Reflectometry¶

Speaker: Geon Seok Lee (Yonsei University)

4LP2-07_Lee Geon Seok.pdf

10:22 4LP2-08 Variable Temperature Insert for Measurement of Critical Current in HT Superconductors¶

Speaker: David Richter (CERN)

10:23 4LP2-09 Conduction Cooled HTS Current Leads for the SIS100 Corrector Magnets¶

Speaker: Alexander Bleile (GSI)

4LP2-09_Bleile Alexander.pdf

10:24 4LP2-10 Design of YBCO HTS current leads for high field medical cyclotron application¶

Speaker: Kaizhong Ding (institute of plasma physics, Chinese Academy of Sciences)

10:25 4LP2-11 Experimental Test of a Multistage Cooled Current Lead for Superconducting High Current DC Applications, designed for an Operating Current of 20 kA¶

Speaker: Mathias Noe (Chair for Energy Systems and Energy Management at University of Kaiserslautern)

10:26 4LP2-12 Design, Testing and Commissioning of 25.4 kA HTS Current Leads¶

Speaker: Michael Boersch (WEKA AG)

10:27 4LP2-13 Cylindrical geometry flux-pump dynamos¶

Speaker: Zhenan Jiang (Victoria University of Wellington)

4LP2-13_Bumby Chris.pdf

10:28 4LP2-14 Cryogenic Electrical Insulation Characteristics of Solid Insulator for the DC HTS Cable¶

Speaker: Haejong Kim (KERI)

10:29 4LP2-15 Discharge mechanisms in liquid nitrogen – breakdown field strength of gaseous nitrogen¶

Speaker: Nicholas Hill (TU Braunschweig)

4LP2-15_Hill Nicholas.pdf

10:30 4LP2-16 Keeping Cool Under Pressure: Dielectric Strength of Solid Insulation in Boiling Liquid Nitrogen¶

Speaker: Zhiyang Jin (University of Canterbury)

4LP2-16_Jin Zhiyang.pdf

10:31 4LP2-17 The Trap Distribution And Dielectric Failure Strength Of Polyamide Film Under DC And Repetitive Pulse Voltage Combination¶

Speaker: Mingyang Wang (Tianjin University)

10:32 4LP2-18 Enhanced Dielectric Breakdown Strength of Cryogenic Gas Mixtures to be Used in Superconducting Power Devices¶

Speaker: Sastry Pamidi (Center for Advanced Power Systems)

4LP2-18_Cheetham Peter.pdf

10:33 4LP2-21 Breakdown and Partial Discharge Characteristics of Transformer Board and Insulating Paper Materials in Liquid Nitrogen¶

Speaker: Christof Humpert (TH Köln (University of Applied Sciences))

4LP2-21_Humpert Christof.pdf

10:34 4LP2-22 Influence of Pressure on Breakdown Characteristics of Liquid Nitrogen in Non-uniform Electric Fields¶

Speaker: Christof Humpert (TH Köln (University of Applied Sciences))

4LP2-22_Humpert Christof.pdf

10:35 4LP2-23 Arc Energy Evaluation In Liquid Nitrogen¶

Speaker: Muhammad Junaid (State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University)

10:36 4LP2-24 Trap Distribution and Dielectric Breakdown of Irradiated Polyimide Film under Combined DC and Pulse Voltage in LN2¶

Speaker: Boxue Du (Tianjin University)

10:37 4LP2-25 Tree Growth Characteristics of Epoxy Resin in LN2 under DC overlapped pulse voltage¶

Speaker: Boxue Du (Tianjin University)

10:38 4LP2-26 Partial Discharge and Breakdown Behavior of Syntactic Foams at 77 K¶

Speaker: Stefan Seibel (RWTH Aachen University)

4LP2-26_Seibel Stefan.pdf

10:39 4LP2-27 Analysis of a superconducting arc-induction type DC circuit breaker for the stability betterment in the direct current system¶

Speaker: Sangyong Park (CHOSUN UNIVERSITY)

10:40 4LP2-27 Cryogenic considerations for cooling superconducting links and application to the high luminosity upgrade of the Large Hadron Collider (LHC)¶

Speaker: Daniel Berkowitz Zamora (CERN)

Cryogenic considerations for cooling SC links and applications for the HL LHC - poster.pdf

10:15 → 12:15 Poster : 4LP3 - Design , manufacture & test of HTS systems¶

10:15 4LP3-01 Minimum quench energy of a wind and react Bi-2212 coil in the temperature region 4.2 to 30 K immersed in either liquid helium, vapour or vacuum.¶

Speaker: Edward Young (University of Southampton)

10:16 4LP3-03 A System for the Generation of Reversible Magnetic Fields using Bulk Superconductors¶

Speaker: Louis Dupont (Normandie Université, ENSICAEN, UNICAEN, CNRS, CRISMAT)

10:17 4LP3-05 A novel Current Switch Controlled by Alternating Current Magnetic Field¶

Speaker: Chao Li (University of Cambridge)

10:18 4LP3-07 Conduction Cooled HTS Dipolar Magnet, Realization and Experimental Results¶

Speaker: Dan Enache (National Institute for Research and Development in Electrical Engineering, ICPE-CA)

4LP3-07_Dobrin Ion.pdf

10:19 4LP3-08 Fabrication and testing of Bi-2212 test coils for high field research magnets¶

Speaker: Steven Ball (Oxford Instruments)

EUCAS 2017 SB 3.pdf

10:20 4LP3-09 Design and Test of a double pancake coil wound by HTS Roebel cable¶

Speaker: Peng Song (Tsinghua University)

4LP3-09_Song Peng.pdf

10:21 4LP3-10 Manufacture and Test of a 3 T Class Insert Coil with YBCO-Coated Conductor¶

Speaker: Yi Shi (Institute of Plasma Physics Chinese Academy of Sciences)

4LP3-10_Shi Yi.pdf

10:22 4LP3-11 Test of the First HTS Demonstrator Coil in the 11 T Background Field of the SULTAN Facility¶

Speaker: Pierluigi Bruzzone (École Polytechnique Fédérale de Lausanne)

10:23 4LP3-12 Validation of the electromagnetic design of a REBCO Superconducting Self-Supplied Electromagnetic Launcher through modelling and characterization¶

Speaker: Arnaud Badel (University Grenoble Alpes–CNRS)

10:15 → 12:15 Poster : 4LP4 - HTS Magnets and Cables¶

10:15 4LP4-02 Experimental verifications of REBCO layer winding for persistent current operation¶

Speaker: Yasuyuki Miyoshi (Japan Superconductor Technology, Inc.)

4LP4-02_Miyoshi Yasuyuki.pdf

10:16 4LP4-03 A highly reproducible superconducting joint between REBCO coated conductors made by a novel method¶

Speaker: Tatsuoki Nagaishi (Sumitomo Electric)

10:17 4LP4-04 Persistent superconducting Joint of REBCO tapes for HTS-MRI magnets¶

Speaker: Akinobu Nakai (Furukawa Electric co.,ltd)

10:18 4LP4-05 Measurement of the inter strand resistance in Roebel cable made of REBCO tapes¶

Speaker: Jerome Fleiter (CERN)

10:19 4LP4-06 Design Aspects of ReBCO CORC based Cable-In-Conduit Conductors¶

Speaker: Tim Mulder (CERN and the University of Twente)

4LP4-06_Mulder Tim.pdf

10:20 4LP4-07 Superconducting High Current ReBCO CORC Bus bars for Large Detector Magnets¶

Speaker: Tim Mulder (CERN and the University of Twente)

4LP4-07_Mulder Tim.pdf

10:21 4LP4-08 Advanced intermediate lengths of punch and coat processed HTS-Roebel cables in EuCARD2¶

Speaker: Anna Kario (Karlsruhe Institute of Technology)

10:22 4LP4-09 Mechanical Characteristics of HTS CrossConductor Strands at Cryogenic Temperature¶

Speaker: Klaus P. Weiss (Karlsruhe Institute of Technology)

EUCAS_2017_4LP4-09_Mechanical_Characteristics-Weiss.pdf

10:23 4LP4-10 Optimization of Winding Technique Based on Anisotropic Characteristics of Commercial REBCO Tapes¶

Speaker: Jie Sheng (University of Bath)

10:24 4LP4-11 Quench Characteristics of 2G YBCO Roebel Cable in a Pancake Coil¶

Speaker: Yifeng Yang (University of Southampton)

10:25 4LP4-12 Could superconducting magnets protect astronauts against space radiation?¶

Speaker: Riccardo Musenich (INFN)

10:15 → 12:15 Poster : 4LP5 - Other Large Size Application¶

10:15 4LP5-03 Enhancement of Magnetic Field Sensing Accuracy by Using High-Temperature Superconductor Shields in Multilayer Planar Configuration¶

Speaker: Jozef Kvitkovic (Florida State University, Center for Advanced Power Systems)

4LP5-03_Kvitkovic Jozef.pdf

10:16 4LP5-04 Manufacturing of coil formers by integral open-die forging and CNC ring rolling process¶

Speaker: Manuel Spielhofer (Imbach & Cie AG)

4LP5-04_Stocker Urban.pdf

10:17 4LP5-05 Manufacture technology of the 9.4 T whole-body MRI superconducting coils¶

Speaker: Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:18 4LP5-06 Development of a 9.4T Whole-body MRI Superconducting Magnet¶

Speaker: Lankai Li (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:19 4LP5-07 Modelling and Testing of MgB2 Segmented Coils and Persistent joints for MgB2 Magnets¶

Speaker: Mike Sumption (MSE, The OHio State University)

10:20 4LP5-08 Stress induced magnetic field in-homogeneity in a 1.5T superconducting MRI magnet¶

Speaker: Sankar Ram Thekkethil (Inter University Accelerator Centre)

10:21 4LP5-09 Design of superconducting external interference Screening (EIS) coils for 1.5T MRI Magnet¶

Speaker: Mukesh Kumar (Inter University Accelerator Centre)

10:22 4LP5-10 Stress Analysis Of Cryogenic Suspension System Of Superconducting Mri Magnet Cryostat¶

Speaker: Navneet Kumar Suman (Inter University Accelerator Centre)

10:23 4LP5-11 Reduction methods of screening currents in REBCO multiple coils based on transport-current control¶

Speaker: Yuichi Ozone (Waseda Univesity)

10:24 4LP5-12 Quench Analysis Of A Whole-Body 1.5 T Superconducting MRI Magnet¶

Speaker: Vijay Soni (Inter-University Accelerator Centre, New Delhi)

10:25 4LP5-13 Numerical Analysis of Eddy Current Forces in the Thermal Shield of a Superconducting Magnet during Quench Events¶

Speaker: Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:26 4LP5-16 Flux expulsion/pinning study in large grain SRF cavities with different impurity¶

Speaker: Pashupati Dhakal (Jefferson Lab)

10:27 4LP5-17 Performance Testing of Superconducting RF cavities at CERN in the post construction era of the LHC¶

Speaker: Alick Macpherson (CERN)

EUCAS_Poster_Macpherson.pdf

10:28 4LP5-18 Commissioning of IPN Orsay Vacuum furnace and first successful Heat treatment of SRF bulk Nb cavities¶

Speaker: Mohammed Fouaidy (Institut de Physique Nucléaire)

10:29 4LP5-19 Towards Optimization of Centrifugal Barrel Polishing Procedure for Treatment of Niobium Cavities¶

Speaker: Alena Prudnikava (University of Hamburg/DESY)

10:30 4LP5-20 Multi-physics Computation and Testing on Pre-Tuning of a Prototype of 1.5-GHz SRF Cavity¶

Speaker: Chih-Hung Lo (National Synchrotron Radiation Research Center)

10:31 4LP5-21 ReBCO coated conductors for the future circular hadron collider beam screen¶

Speaker: Joffre Gutierrez (ICMAB - CSIC, Bellaterra, Spain)

10:32 4LP5-22 Summary of low temperature nitrogen doping study on SRF cavities¶

Speaker: Pashupati Dhakal (Jefferson Lab)

10:33 4LP5-23 Characteristics analysis in Resonance coil applied to Superconducting Wireless Power Transfer¶

Speaker: In-Sung Jeong (Chosun University)

10:34 4LP5-24 ORE SEPARATOR MADE OF HIGH-TEMPERATURE SUPERCONDUCTORS YBCO¶

Speaker: Jiangdi Fan (Chongqing Academy of Science and Technology)

10:15 → 12:15 Poster : 4LP6 - Motors, Generators and other Rotating Machines¶

10:15 4LP6-01 Testing of a full-scale HTS coil for a 2.5 MW wind turbine generator¶

Speaker: Yudong Jiang (Dongfang Electric Corporation)

10:16 4LP6-02 Design of a 15 kW fully superconducting synchronous generator¶

Speaker: Timing Qu (Department of mechanical engineering, Tsinghua University)

4LP6-02_Li Yufan.pdf

10:17 4LP6-03 Electromagnetic characteristic analysis and Optimization design of a novel HTS coreless induction motor with high speed¶

Speaker: Bin Liu (School of Electrical Engineering, Beijing Jiaotong University)

4LP6-03_Liu Bin.pdf

10:18 4LP6-04 System approach of usability of HTS electrical machines in future electric aircraft¶

Speaker: Dmitry Dezhin (Moscow Aviation Institute)

4LP6-04_Dezhin Dmitry.pdf

10:19 4LP6-06 A Large Scale Double-Stator Direct Driving HTS Wind Generator¶

Speaker: Yi Cheng (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)

4LP6-06_Cheng Yi.pdf

10:20 4LP6-07 HTS Inductor Motor with Combined Excitation¶

Speaker: Roman Ilyasov (Moscow Aviation Institute)

10:21 4LP6-08 Brushless non-steel HTS generator with combined excitation with trapped field plates on the rotor¶

Speaker: Kirill A. Modestov (Moscow Aviation Institute (MAI))

4LP6-08_Modestov Kirill A..pdf

10:22 4LP6-09 A new type of superconducting motor with 2G HTS magnet rings¶

Speaker: Min Zhang (University of Bath)

10:23 4LP6-10 Electromagnetic Design of Superconducting Synchronous Motors for Electric Aircraft Propulsion¶

Speaker: Yutaka Terao (University of Tokyo)

10:24 4LP6-11 Electromechanical Design of a MW Class Wave Energy Converter with a Tubular HTS Linear Generator¶

Speaker: Hailian Jing (Tokyo University of Marine Science and Technology)

4LP6-11_Jing Hailian.pdf

10:25 4LP6-12 Electrical analysis of 10 MW superconducting generator for aircraft applications¶

Speaker: Kiwook Yun (Kyushu university)

10:26 4LP6-13 Comparative study of 1MW PM and HTS synchronous generators for marine current turbine¶

Speaker: Zhi Li (2-1-6, Etchujima, Koto-ku, Tokyo, JAPAN)

4LP6-13_Li Zhi.pdf

10:27 4LP6-14 Design of a 20 MW Fully Superconducting Wind Turbine Generator to Minimize the Levelized Cost of Energy¶

Speaker: Hoang Trung - Kien (GeePs, CentraleSupelec, University of Paris-Saclay)

10:28 4LP6-15 Design and Performance of AC Superconducting Motors for Aerospace Electric Propulsion Systems¶

Speaker: Charalampos D. Manolopoulos (School of Electrical and Electronic Engineering, The University of Manchester)

4LP6-15_Manolopoulos Charalampos D.pdf

10:29 4LP6-16 Design report of a 4KW superconducting HTS synchronous motor using HTS stacked tapes.¶

Speaker: Mehdi Baghdadi (University of Greenwich)

10:30 4LP6-17 Design study of 2MW fully superconducting motors¶

Speaker: Shogo Fukuda (Kyushu University)

10:31 4LP6-18 A superconducting machine for Aircraft application¶

Speaker: Alexandre Colle (Universite de Lorraine - SAFRAN Tech)

10:32 4LP6-19 Design Aspects and Testing of Superconducting Flywheels¶

Speaker: Achim Hobl (Babcock Noell GmbH)

4LP6-19_Hobl Achim.pdf

10:33 4LP6-20 The Effect Research of Armature Position on Electromagnetic Propulsion Efficiency¶

Speaker: Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:34 4LP6-22 Small-scale motor with AC HTS windings¶

Speaker: Dmitry Dezhin (Moscow Aviation Institute)

10:15 → 12:15 Poster : 4LP7 - FCL and the Grid¶

10:15 4LP7-01 New technique for using SMES to limit fault currents in wind farm power systems¶

Speaker: Mariam Elshiekh (University of Bath)

10:16 4LP7-02 Characteristics of Reactor type superconducting DC current limiter for improved stability in the DC power system¶

Speaker: Hyewon Choi (CHOSUN University)

10:17 4LP7-03 Optimum Positioning Of HTS Based Resistive Fault Current Limiter¶

Speaker: Prof. V. V. Rao (INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR)

10:18 4LP7-04 Feasible Application Study of Different Types of Superconducting Fault Current Limiters in HVDC Grids¶

Speaker: Ho-Yun Lee (Hanyang University)

10:19 4LP7-06 Application of Flux-Coupling SFCL to Secure Fault Ride Through in Carbon-Free Stand-Alone Microgrid¶

Speaker: Soo Hyoung Lee (Korea Electrotechnology Research Institute (KERI))

10:20 4LP7-08 Power Differential Protection for Transmission Lines with Superconducting Fault Current Limiters¶

Speaker: Diaa-Eldin A. Mansour (Kafrelsheikh University)

10:21 4LP7-09 Hardware-in-the-loop Simulation on Fault Current Limiting Operation of RE-123 Coated Conductors under the Influence of Spatial Inhomogeneity¶

Speaker: Kohei Higashikawa (Kyushu University)

10:22 4LP7-10 DC Superconducting Fault Current Limiter Applications and Technical Indexes¶

Speaker: Bin Li (School of Electrical & Information Engineering, Tianjin University, China)

10:23 4LP7-11 Fault Current Limitation Coordination in Electric Power Grid with Superconducting Fault Current Limiters¶

Speaker: Naoki Hayakawa (Nagoya University)

10:24 4LP7-13 Study of SFCL for multi-terminal HVDC network¶

Speaker: Ying Xin (Tianjin University)

4LP7-13_Xin Ying.pdf

10:25 4LP7-15 PHILS of Transmission Line Protection System for the application of 154 kV SFCL in Korea¶

Speaker: Seung Ryul Lee (KERI)

10:26 4LP7-16 Research on the Application of Active Saturated Iron-Core Superconductive Fault Current Limiters in the VSC-HVDC System¶

Speaker: Botong Li (School of Electrical and Information Engineer, Tianjin University)

10:27 4LP7-17 Comparison between Different Models of Superconducting Fault Current Limiter with Application to an Electric Power Circuit¶

Speaker: José Juan Pérez-Chávez (National Autonomous University of Mexico (UNAM))

4LP7-17_Pérez-Chávez José Juan.pdf

10:28 4LP7-18 Enhancement test of Critical Clearing Time of One-machine Infinite Bus Transmission System by Use of SFCL¶

Speaker: Yasuyuki Shirai (Kyoto University)

4LP7-18_Shirai Yasuyuki.pdf

10:29 4LP7-19 Simulation study of the impact of superconducting fault current limiters to power grid¶

Speaker: Fei Liang (Bath University)

10:30 4LP7-20 Study of a Modified Flux-Coupling-Type Superconducting Fault Current Limiter for Protection of a DC Micro-Grid¶

Speaker: Lei Chen (Wuhan University)

10:31 4LP7-21 Characteristics of Superconducting DC interrupting system for operational reliability in the full scale converter wind turbines¶

Speaker: Jun-Beom Kim (Chosun University)

10:32 4LP7-22 Optimal Location of Superconducting Fault Current Limiters (SFCLs) for Fault Current Reduction in Korean AC Transmission Grids¶

Speaker: Jin Hur (Sangmyung University)

10:33 4LP7-23 Performance Enhancement of PMSG Wind Turbines with DC Microgrids Using Resistive-Type SFCL¶

Speaker: Diaa-Eldin A. Mansour (Tanta University)

10:34 4LP7-24 Analysis of Characteristics of Blocking Part for Optimized Inductor-Combined Superconducting DC Fault current limiter¶

Speaker: Seonho Hwang (Chosun University)

10:15 → 12:15 Poster : 4MP1 - Fe-Based¶

10:15 4MP1-01 Pulsed Laser Deposition of Fe-based superconductor thin films with 355nm Nd:YAG laser¶

Speaker: Sven Meyer (Karlsruhe Institute for Technology)

10:16 4MP1-02 Investigation of dimensional dependent electronic properties in tetragonal iron chalcogenides¶

Speaker: Ekaterina Kozlyakova (Lomonosov Moscow State University, Moscow, Russia)

10:17 4MP1-04 Phase separation and microstructure in superconducting FeSe1-xTex materials¶

Speaker: Andrea Masi (ENEA - Università Roma Tre)

4MP1-04_Masi.pdf

10:18 4MP1-05 Superconducting properties of (Ba,Na)Fe2As2 powder-in-tube wires and tapes¶

Speaker: Shoko Itou (Department of Physics, Tokyo University of Science)

10:19 4MP1-06 Production of silver added bulk FeSe material by ball-milling technique¶

Speaker: Furutani Kouichi (Shibaura Institute of Technology)

10:20 4MP1-07 Deposition and properties of Iron-Chalcogenide Fe(Se,Te) film¶

Speaker: Antonella Mancini (ENEA)

10:21 4MP1-09 On The Nature Of Unusual Microwave Response Of Thin FeSe1-xTex Film Near Critical Temperature¶

Speaker: Guoqiang Li (O.Usikov IRE NAS of Ukraine)

4MP1-09_Cherpak Nickolay (Mykola).pdf

10:22 4MP1-10 Effect of post annealing on physical properties of BaFe2As2-based superconductors¶

Speaker: Shigeyuki Ishida (AIST)

10:23 4MP1-13 Structure and superconducting properties of oxypnictide thin films by molecular beam epitaxy¶

Speaker: Sandra Kauffmann-Weiss (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP))

10:24 4MP1-15 Can topological transitions be exploited to engineer intrinsically quench-resistant wires?¶

Speaker: Jorge Quintanilla (University of Kent)

10:15 → 12:15 Poster : 4MP2 - MgB2 2/2¶

10:15 4MP2-01 Development status of MgB2 superconducting wires at KAT¶

Speaker: Sehoon Jang (KAT)

10:16 4MP2-02 Jc-B-T properties of MgB2 film on Cu tape¶

Speaker: Takumu Iwanaka (Hitachi, Ltd)

4MP2-02_Iwanaka Takumu.pdf

10:17 4MP2-03 Properties of Critical Current and Normal Zone Propagation of Multi-filamentary MgB2 Superconducting Wire Cooled by Liquid Hydrogen¶

Speaker: Katsuyuki Fujita (Kyoto University)

4MP2-03_Fujita Katsuyuki.pdf

10:18 4MP2-04 A comparative study of new Ge-based additions to MgB2¶

Speaker: Dan Batalu (University POLITEHNICA of Bucharest)

4MP2-04_Batalu Dan.pdf

10:19 4MP2-05 Improvement of MgB2 superconducting properties acting on boron precursor by freeze-drying process¶

Speaker: Gianmarco Bovone (SPIN Institute)

10:20 4MP2-06 MgB2 superconductors produced by Encapsulated Nano Boron with two different magnesium sources¶

Speaker: Serap Safran (ANKARA UNIVERSITY)

10:21 4MP2-07 Enhanced properties of bulk MgB2 fabricated by an excess Mg method for applications¶

Speaker: Ercan Ertekin (Ankara University)

10:22 4MP2-08 Open-ends and closed-ends powder-in-tube tapes of MgB2 processed by spark plasma sintering¶

Speaker: Gheorghe Virgil Aldica (National Institute of Materials Physics)

10:23 4MP2-09 Persistent Current Operation of MgB2 Coils with Superconducting Joints of Reacted Wires¶

Speaker: Yota Ichiki (Hitachi, Ltd.)

4MP2-09_Yota_Ichiki.pdf

10:24 4MP2-10 Properties of ex-situ MgB2 bulk samples prepared by uniaxial hot pressing¶

Speaker: Wolfgang Häßler (Leibniz-Institut for Solid State and Materials Research (IFW) Dresden)

10:25 4MP2-12 Structure and properties of MgB2 bulks, thin films and wires; effect of TiO2 and TiC additions¶

Speaker: Tetiana Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine)

4MP2-12_Prikhna Tetiana.pdf

10:26 4MP2-13 Superconducting MgB2 processed by Spark Plasma Sintering for different pulsed current patterns¶

Speaker: Petre Badica (National Institute of Materials Physics)

10:15 → 12:15 Poster : 4MP3 - Basic Properties¶

10:15 4MP3-01 Modelling the Critical Current of Surfaces and Grain Boundaries in Superconducting Films at High Magnetic Fields¶

Speaker: Alexander Blair (Department of Physics)

4MP3-01_Blair Alexander.pdf

10:16 4MP3-02 Reversible Superconducting Diodes Using Rectified In-plane Vortices in Asymmetrically Multilayered BaHfO3-doped SmBa2Cu3Oy Films¶

Speaker: Yuji Tsuchiya (Nagoya Univ.)

10:17 4MP3-03 Extraction of the complex resistivity and pinning parameters from microwave surface impedance measurements of coated conductors¶

Speaker: Nicola Pompeo (Dipartimento di Ingegneria, Università Roma Tre)

10:18 4MP3-06 Superconducting Properties of Endohedral Gallide Cluster Based Mo8Ga41 superconductor¶

Speaker: Prakriti Neha (Jawaharlal Nehru University)

10:19 4MP3-07 On the origin of critical temperature enhancement in atomically-thin superconductors¶

Speaker: Evgeny Talantsev (Robinson Research Institure, Victoria University of Wellington)

10:20 4MP3-11 Presents the results of testing to achieve superconducting temperature¶

Speaker: Sadeq Kazemifard (fard technology)

10:15 → 12:15 Poster : 4MP4 - Measurement Techniques 2/2¶

10:15 4MP4-01 High current probe for gas flow Ic(B,T) measurements with ±0.01 K temperature precision: HTS current leads and active temperature compensation system¶

Speaker: Christian Barth (University of Geneva, Department of Quantum Matter Physics)

4MP4-01_Barth Christian.pdf

10:16 4MP4-03 Contactless verification of defects in 2G HTSC tapes with two-side superconducting layers¶

Speaker: Igor Rudnev (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))

10:17 4MP4-04 Finite Element Calculation of the Critical current and Magnetic "Levitation" Force between a Permanent Magnet and a ZFC YBaCuO Sample in Mixed State¶

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

4MP4-04_Neves Marcelo.pdf

10:18 4MP4-05 Critical Current Density Transport Measurements on ITER Poloidal Field NbTi Strands from 3.5 to 8.0 K, in magnetic fields up to 8.0 T, using a Bespoke Probe¶

Speaker: Mark Raine (Durham University Department of Physics)

10:19 4MP4-06 Study of Precursor Solution Used For YBCO Films Chemical Solution Deposition: Solution Reactivity and Effects on Film Properties¶

Speaker: Valentina Pinto (ENEA)

10:20 4MP4-07 Investigation of REBCO Roebel Cable Irreversible Critical Current Degradation Under Transverse Pressure¶

Speaker: Jaakko Murtomäki (CERN)

4MP4-07_Murtomäki Jaakko.pdf

10:21 4MP4-08 International round robin test on critical current measurement of RE-Ba-Cu-O (RE=rare earth) superconducting tapes¶

Speaker: Gen Nishijima (National Institute for Materials Science)

4MP4-08_Nishijima Gen.pdf

10:22 4MP4-09 Simple Method to Fabricate Intrinsic Josephson Junction Device by Using Water-treatment Process¶

Speaker: Hiromi Tanaka (National Institute of Technology, Yonago College)

10:23 4MP4-10 Magnetic study of Nb micro-ring using attonewton-sensitivity dynamic cantilever magnetometer¶

Speaker: Jae-Hyuk Choi (Korea Reserach Institute of Standards and Science)

10:24 4MP4-11 The interfacial thermal surface resistivity between the Nb-Ti filaments and the matrix in High-field multifilamentary composite wires¶

Speaker: Francis Ridgeon (Durham University)

10:25 4MP4-12 Research on Non-destructive Examination of bracket welds ITER In-Vessel Coils (IVC)¶

Speaker: Xiaochuan Liu (Institute of Plasma Physics Chinese Academy of Sciences)

4MP4-12_Liu Xiaochuan.pdf

10:15 → 12:15 Poster : 4MP5 - Cuprate Thin Films 2/2¶

10:15 4MP5-01 Ex-situ liquid assisted growth of GdBa2Cu3O7-δ films on Hastelloy metal substrates¶

Speaker: Oleksiy Troshyn (THEVA Dünnschichttechnik GmbH)

10:16 4MP5-02 Optimization of novel melt-growth heat treatment of YbBa2Cu3O7-δ / Ag tapes¶

Speaker: Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:17 4MP5-04 Surface Decoration as Prospective Artificial Pinning Strategy in Superconducting YBa2Cu3O7-x films¶

Speaker: Laura Piperno (Engineering Department, Roma Tre University)

4MP5-04_Piperno.pdf

10:18 4MP5-05 Low temperature fabrication of crack free GdBa2Cu4O8 films on oxide seed layer by molten hydroxide flux method¶

Speaker: Keisuke Soeda (shimane university)

10:19 4MP5-06 Nanodiamond: a New Tool for Artificial Pinning Center introduction in YBCO Films obtained through Chemical Solution Deposition¶

Speaker: Valentina Pinto (ENEA)

10:20 4MP5-07 Laser Modification of 2G-HTS Tapes Surface¶

Speaker: Neslihan Turan (Gazi University, Ankara, Turkey)

4MP5-07_Turan Neslihan.pdf

10:21 4MP5-08 Enhancement of superconducting properties for low-temperature LPE-REBa2Cu3Oy films via phase decomposition process in various RE elements¶

Speaker: Shuhei Funaki (Shimane University)

10:22 4MP5-09 Fabrication of YBCO Superconducting Film on {100} Textured Cu Tape via Conductive Buffer Layers¶

Speaker: Toshiya Doi (Kyoto University)

10:23 4MP5-10 Investigation on the Superconducting Properties of YGBCO/STO/YGBCO Tri-layer¶

Speaker: Yanjie Yao (Key laboratory of Artificial Structures and Quantum Control, Shanghai Jiao Tong University)

4MP5-10_Yao Yanjie.pdf

10:24 4MP5-11 Eutectic temperature determination of the BaO-CuO-O system in bulk and in films¶

Speaker: Silvia Rasi (Universitat de Girona)

10:25 4MP5-13 Flux pinning properties of Hf and Zr-doped Bi,Pb-2223 thin films with columnar defects¶

Speaker: Akiyoshi Matsumoto (National Institute for Materials Science)

10:26 4MP5-14 Microstructure and superconducting properties of impurity doped Bi,Pb-2223 thin films fabricated sputtering method¶

Speaker: Akiyoshi Matsumoto (National Institute for Materials Science)

10:27 4MP5-15 Control on phases formation in melt processed (Bi,Pb)-Sr-Ca-Cu-O samples due to Ag and PbO additions¶

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

4MP5-15_Neves Marcelo.pdf

10:28 4MP5-16 Microstructure and Current Transport of Tl-1223 Thin Film Superconductors¶

Speaker: Sigrid Holleis (Atominstitut, TU Wien)

4MP5-16_Holleis.pdf

10:29 4MP5-17 Characterization of electrospun BSCCO nanowires with reduced preparation temperature¶

Speaker: Michael Koblischka (Saarland University)

10:30 4MP5-18 Assessment of Bi2Sr2CaCu2O8 Thin Films Grown by MOCVD for Power Electronics Applications¶

Speaker: Kazuhiro Endo (Kanazawa Institute of Technology)

10:31 4MP5-21 Growth of epitaxial YBCO double films derived from solution deposition¶

Speaker: Lihua Jin (ShaanxiRare Metals Science and Industry Group Co., Ltd.)

10:15 → 12:15 Poster : 4MP6 - Strain, Irradiation, Thermal Properties¶

10:15 4MP6-01 Evaluation of actual delamination strength of REBCO coated conductors based on the Weibull analysis considering size effect¶

Speaker: Shogo Muto (Fujikura Ltd.)

10:16 4MP6-02 Thermal stability of commercially available coated conductors¶

Speaker: Alan Preuß (Karlsruhe Insitute of Technology)

4MP6-02_Preuß Alan.pdf

10:17 4MP6-03 Unusual thermal properties of nonsuperconducting PrBCO ceramics at low temperatures¶

Speaker: Mahieddine Lahoubi (Badji-Mokhtar Annaba University, Faculty of Sciences,)

10:18 4MP6-04 Thermal conductivity and dilatation of a Bi-2223/Ag (DI-BSCCO) superconducting wire laminated with Ni-alloy tapes¶

Speaker: Yuichi Yamada (Iwate University)

4MP6-04_Naito Tomoyuki.pdf

10:19 4MP6-05 Investigation of light-weight material of cryogenic pipe for aviation application¶

Speaker: Masae Kanda (Chubu University)

10:20 4MP6-06 Development of High-Strength BSCCO-2223 Tapes¶

Speaker: Kozo Osamura (Research Institute for Applied Sciences)

10:21 4MP6-07 Application of DIC to extract full field stress-strain data of superconducting coils under thermal contraction¶

Speaker: Jorge Pelegrin (University of Southampton)

4MP6-07_Bailey Wendell.pdf

10:22 4MP6-08 Strain effect on quench characteristics of YBCO Coated Conductor¶

Speaker: Jiangtao Shi (Southwest Jiaotong University)

4MP6-08_Shi Jiangtao.pdf

10:23 4MP6-09 Structural modelling of REBCO CC tapes in TORT cables¶

Speaker: Eva Michalcová (Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava)

4MP6-09_Michalcová Eva.pdf

10:24 4MP6-10 Bending-peeling method to measure interface strength of YBCO tape¶

Speaker: Peng Jin (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:25 4MP6-11 Delamination strength testing of commercial ReBCO tapes: climbing drum peel testing¶

Speaker: Nicholas Long (Victoria University of Wellington)

4MP6-11_Nicholas Long.pdf

10:26 4MP6-12 Effect of mechanical loading on high temperature superconducting tapes during bending of round cables¶

Speaker: Marcela Pekarčíková (Slovak University of Technology in Bratislava)

4MP6-12_Pekarčíková Marcela.pdf

10:27 4MP6-13 Mechanical and thermal properties of All-CSD-YBCO superconducting tapes and joints¶

Speaker: Michael Baecker (Deutsche Nanoschicht GmbH)

10:28 4MP6-14 Electrical and Strain Behaviors of Solid Nitrogen and Conduction Cooled YBCO Coil under Thermal Disturbance and Overcurrent Pulse¶

Speaker: Liyuan Liu (Southwest jiaotong university)

4MP6-14_Liu Liyuan.pdf

10:29 4MP6-15 Ion-irradiation effect of microwave surface resistance of YBa2Cu3Oy thin films in magnetic field¶

Speaker: Shigetoshi Ohshima (Yamagata University)

10:30 4MP6-16 Effect of neutron irradiation on critical currents of some REBaCuO superconducting tapes considered for magnets of fusion reactors¶

Speaker: Miloš Jirsa (Institute of Physics CAS)

poster 4MP6-16.pdf

10:15 → 12:15 Poster : 4MP7 - Coated Conductors 2/2¶

10:15 4MP7-02 Ic survival of the delaminated coated conductor and its potential application in superconducting joint¶

Speaker: Feng Feng (Tsinghua University)

4MP7-02_Feng Feng.pdf

10:16 4MP7-03 Thick YBa2C3O7-x layers with ink jet printing single deposition¶

Speaker: Bohores Villarejo (ICMAB - CSIC)

10:17 4MP7-04 Electro-mechanical property of YBCO coated conductors lap joint under multi-fields¶

Speaker: Xingyi Zhang (Lanzhou University)

10:18 4MP7-05 Long length inkjet-printed solution deposition planarization layers for 2G-coated conductors¶

Speaker: Marta Vilardell (OXOLUTIA S.L.)

10:19 4MP7-06 Manufacturing Process Upgrade and New Research Directions at SuperOx Japan¶

Speaker: Valery Petrykin (SuperOx Japan)

10:20 4MP7-07 Microstructures of Conductive Buffer Layers for YBCO Coated Conductors Using Cube-Textured Cu Tapes¶

Speaker: Ataru Ichinose (Central Research Institute of Electric Power Industry)

10:21 4MP7-08 Electrical and mechanical behavior of electrical, Pb- and Cd-free, joints with normal- and superconducting materials at low temperatures¶

Speaker: Katrin Bäuml (Schneider Electric Sachsenwerk GmbH)

4MP7-08_Bäuml Katrin.pdf

10:22 4MP7-09 Measurement at 4 K of normal zone propagation velocity in commercial REBCO conductors¶

Speaker: Maxime Matras (CERN)

4MP7-09_Matras Maxime.pdf

10:23 4MP7-10 Transport Current Characteristics with Material Properties of the Outer Layer of REBCO 2G Wire Having Composite Structure Using RF Sputtering Deposition Method¶

Speaker: Ho Ik Du (Chonbuk National University)

10:24 4MP7-11 Evaluation on Properties of YBCO tapes insulated by Electrocoating¶

Speaker: Han Zhang (Dongfang Electric Corporation)

10:25 4MP7-12 Fabrication and properties of aluminum alloy laminated GdBCO coated conductor¶

Speaker: Sang-Soo Oh (Korea Electrotechnology Research Institute)

10:26 4MP7-13 Induction soldering of coated conductor high temperature superconducting tapes with lead-free solder alloys¶

Speaker: Marian Drienovsky (Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava)

4MP7-13_Drienovsky Marian.pdf

10:27 4MP7-14 Quality management in production of textured templates for 2G HTS wire¶

Speaker: Alexey Mankevich (SuperOx)

10:28 4MP7-15 Observation of Zero Resistance in As-electrodeposited FeSe¶

Speaker: Aichi Yamashita (National Institute for Materials Science)

10:29 4MP7-16 Study of Growth Process for YBa2Cu3Oy Coated Conductors with BaZrO3 Flux Pinning Centers by Monitoring Electrical Conductivity¶

Speaker: Ryo Teranishi (Kyushu University)

10:30 4MP7-17 Interfacial shearing stress induced by flux pinning in a superconducting coated conductor long strip with transport current in a perpendicular magnetic field¶

Speaker: Yumei Yang (Lanzhou university of technology)

10:31 4MP7-18 Microstructure and texture of a two level undercut-profile Ni-5at.%W substrate for coated conductors¶

Speaker: Anders Wulff (Technical University of Denmark)

10:32 4MP7-20 PLD manufacturing of superconducting tapes¶

Speaker: Ralph Delmdahl (Coherent LaserSystems GmbH & Co. KG)

4MP7-20_Delmdahl Ralph.pdf

10:33 4MP7-21 The effect of BaZrO3 nanoparticles on Jc in longitudinal magnetic field for TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy wires¶

Speaker: Kota Hirai (Seikei University)

10:34 4MP7-22 An approach to superconducting joints between REBCO coated conductors based on chemical solution deposition¶

Speaker: Anke Kirchner (IFW Dresden)

12:15 → 13:15 Lunch break

13:15 → 15:30 4EO1 - Digital and Quantum Processings¶

13:15 4EO1-01 Recent research developments of adiabatic quantum-flux-parametron circuits technology toward energy-efficient high-performance computing¶

Speaker: Yoshikawa Nobuyuki (Yokohama National University)

4EO1-01_Nobuyuki Yoshikawa_Room 3+4.pdf

13:45 4EO1-02 Theory and experimental analysis of the sensitivity of an adiabatic quantum flux parametron¶

Speaker: Thomas Ortlepp (CIS Institut fuer Mikrosensorik GmbH (DE))

4EO1-02_Thomas Ortlepp_Room 3+4.pdf

14:00 4EO1-03 One- and Two-Bit Reversible Fluxon Logic Gates¶

Speaker: Osborn Kevin (U. of Maryland, USA)

14:15 4EO1-04 Coherent control of superconducting transmon qubits with an on-chip single flux quantum driver¶

Speaker: Leonard Jr, Edward (University of Wisconsin - Madison)

4EO1-04_Edward Leonard Jr._Room 3+4.pdf

14:30 4EO1-05 Direct Detection of Single Flux Quantum Generated in Superconducting Strip Photon Detectors¶

Speaker: Abe Yutaka (Yokohama National University)

4EO1-05_Yutaka Abe_Room 3+4.pdf

14:45 4EO1-06 Superconductor Electronics Fabrication Process with Self-Shunted Josephson Junctions and Kinetic Inductors¶

Speaker: Tolpygo Sergey (MIT Lincoln Laboratory)

4EO1-06_Sergey Tolpygo_Room 3+4.pdf

15:00 4EO1-07 Energy-Efficient Dual-Port 32-word 8-bit ERSFQ Register File¶

Speaker: Alex Kirichneko (HYPRES)

4EO1-07_Alex Kirichneko_Room 3+4.pdf

15:15 4EO1-08 Progress on development of an rf waveform synthesizer with quantum-based accuracy¶

Speaker: Manuel Castellanos Beltran (NIST)

4EO1-08_Manuel Castellanos Beltran_Room 3+4.pdf

13:15 → 15:30 4LO2 - Large Scale: Accelerator Magnets¶

13:15 4LO2-01 Progress and Status on LHC High Lumi project magnets¶

Speaker: Ezio Todesco (CERN)

4LO2-01_Ezio Todesco_Room 1.pdf

13:45 4LO2-02 ReBCO 20T+ Dipoles for Particle Accelerators¶

Speaker: Jeroen Van Nugteren (CERN)

4LO2-02_Jeroen van Nugteren_Room 1.pdf

14:15 4LO2-03 16 T cosθ dipole for the Future Circular Collider (FCC)¶

Speaker: BARBARA CAIFFI (INFN - National Institute for Nuclear Physics)

4LO2-03_Barbara Caiffi_Room 1.pdf

14:30 4LO2-04 Advances in superconducting Bi-2212 conductor and accelerator magnet development¶

Speaker: Tengming Shen (Fermilab)

4LO2-04_Tengming Shen_Room 1.pdf

14:45 4LO2-05 Radiation Effects in Superconducting Quadrupoles for BigRIPS In-flight Separator at RIKEN¶

Speaker: Kensuke Kusaka (RIKEN Nishina Center for Accelerator-Based Science)

4LO2-05_Kensuke Kusaka_Room 1.pdf

15:00 4LO2-06 First Operation of the Complete KATRIN Superconducting Magnet Chain¶

Speaker: Woosik Gil (Karlsruhe Institute of Technology (KIT))

4LO2-06_Woosik Gil_Room 1.pdf

15:15 4LO2-07 First experimental results on damage limits of superconducting accelerator magnet components due to instantaneous beam impact¶

Speaker: Vivien Raginel

20170921_VRaginel_EUCAS17_FirstExpResultsDamageLimitScMagnet.pdf

20170921_VRaginel_EUCAS17_FirstExpResultsDamageLimitScMagnet.pptx

13:15 → 15:30 4MO3 - Coated Conductor: Processing and Properties¶

13:15 4MO3-01 European progress toward Nanostructure engineering in coated conductors¶

Speaker: Anna Palau (Institut de Ciencia de Materials de Barcelona, ICMAB-CSIC)

4MO3-01_Anna Palau_Room 2.pdf

13:45 4MO3-02 Comparison of in-field transport Ic , Jc, and Fp for R&D and production ReBCO tapes¶

Speaker: Dmytro Abraimov (NHMFL)

4MO3-02_Dmytro Abraimov_Room 2.pdf

14:00 4MO3-03 Thick secondary phase pinning-enhanced YBCO films on technical templates¶

Speaker: Max Sieger (IFW Dresden)

4MO3-03_Max Sieger_Room 2.pdf

14:15 4MO3-04 Effective vortex-pinning features of YBa2Cu3O7-x films with self-assembled Ba2YTaO6/Ba2YNbO6 columnar defects, grown on ABAD-based metallic templates¶

Speaker: Francesco Rizzo (ENEA)

4MO3-04_Francesco Rizzo_Room 2.pdf

14:30 4MO3-05 Temperature dependence of flux pinning in REBCO coated conductors with artificial pinning centers¶

Speaker: Prof. Kaname Matsumoto (Kyushu Institute of Technology)

EUCAS 2017 matsumot 1.pdf

14:45 4MO3-06 Jointing Technique of Coated Conductors by Pastes Including Nano-sized Metal Particles¶

Speaker: Takato Machi (National Institute of Advanced Industrial Science and Technology(AIST))

4MO3-06_Takato Machi_Room 2.pdf

15:00 4MO3-07 Long Coated Conductors with Uniform and High In-field Performance¶

Speaker: Teruo Izumi (Advanced Industrial Science and Technology)

4MO3-07_Teruo Izumi_Room 2.pdf

15:15 4MO3-08 Chemical solution deposition growth of low fluorine thick coated conductors of YBa2Cu3O7 and YBa2Cu3O7 nanocomposites with preformed BZO nanoparticles¶

Speaker: Cornelia Pop (Materials Science Institut of Barcelona (ICMAB-CSIC))

4MO3-08_Cornelia Pop_Room 2.pdf

15:30 → 16:20 4P1 - Plenary 4¶

4P1-01_Pascal Febvre_Room 1.pdf

15:30 4P1-01 Superconducting Computing: An Energy-Efficient Quantum-Based Technology For Supercomputers¶

Speaker: Pascal Febvre (Université Savoie Mont Blanc)

16:20 → 16:45 Closing¶