Focus on:  Hide Contributions
Back to Conference View
Login

EUCAS 2017

→ Europe/Zurich
CICG (Geneva)

CICG

Geneva
Description

WELCOME TO GENEVA!

Welcome to the 13th biennial European Conference on Applied Superconductivity, EUCAS 2017, organized under the auspices of ESAS, the European Society for Applied Superconductivity.

17th – 21st September 2017

EUCAS 2017 will be held 17-21 September 2017 in the International Conference Centre of Geneva (CICG), hosted by CERN in collaboration with the University of Geneva and EPFL-SPC.

EUCAS is a worldwide forum for scientists and engineers, and provides an ideal platform to share knowledge and the most recent advances in all areas of applied superconductivity: from large-scale applications to miniature electronics devices, with a traditional focus on advanced materials and conductors. The broad scope is at the same time a challenge and an opportunity to foster novel, inter-disciplinary approaches and promote cross-fertilization among the various fields of applied superconductivity.

The Scientific Program Committee has taken up this challenge, and is devising a diverse and exciting program. In line with the tradition of conferences on applied superconductivity, and following the successful experience of EUCAS 2015 in Lyon, all papers presented at the conference are eligible for submission to a peer-reviewed special issue of IEEE Transaction on Applied Superconductivity.

We plan to complement the scientific program with an evening outreach event, whose highlight will be the public address of Fabiola Gianotti, CERN Director General.

The conference will be closed by an event of unique flavor, punctuated by historical landmarks of superconducting technology for accelerators that will take place in the large CERN Superconducting Magnet Test Facility complex, following a visit to some of the most significant CERN installations.

Geneva, located at the foot of the Alps and the Jura, on the banks of Lake Leman, at the border of Switzerland and France, has a long history of diversity and tolerance. It is the well-known seat of several International Organizations (among others the European headquarters of UN, WHO, WTO, UNHCR, ICRC, and CERN). But Geneva is also a unique city of culture, and the perfect home base for exploring wonderful surroundings in Switzerland and France (the Mont Blanc alpine slopes are less than an hour’s drive away). Participants to EUCAS 2017 will be able to find a wide range of hotels suitable for each need.

On behalf of the Local Organizers, the Program Committee, and the many volunteers who are helping to arrange for a world-class conference, we welcome you to Geneva in September 2017.

 

  • Sunday 17 September
  • Monday 18 September
    • Welcome Address and Awards CICG - Room 1 (Geneva )

      CICG - Room 1

      Geneva

      Awards_1.pdf
      Awards_2.pdf
      Awards_3.pdf
    • ESAS Award & Talk CICG - Room 1

      CICG - Room 1

      Geneva
    • 1P1 - Plenary 1 CICG - Room 1

      CICG - Room 1

      Geneva
      • 7
        1P1-01 - Charge Density Waves in underdoped High-Tc materials
        Speaker: Ted Forgan (University of Birmingham)
        1P1-01_Ted Forgan_Room 1.pdf
    • 09:50
      Coffee Break CICG

      CICG

      Geneva
    • 1E01 CICG - Room 3+4

      CICG - Room 3+4

      Geneva
      • 8
        1EO1-01 Transport and noise properties of YBCO nanowire based nanoSQUIDs
        Speaker: Thilo Bauch (Chalmers University of Technology)
        1EO1-01_Thilo Bauch_Room 3+4.pdf
      • 9
        1EO1-02 3D nanoSQUID with an energy sensitivity of 1 h at 4.2 K
        Speaker: Carmine Granata (National Research Council, Institute of Applied Sciences and Intelligent Systems)
        1EO1-02 Granata Room 3+4.pdf
      • 10
        1EO1-03 SQUIDs with sub-micron Josephson junctions for ultra-low-field magnetic resonance imaging
        Speaker: Juho Luomahaara (VTT Technical Research Centre of Finland)
        1EO1-03_Juho Luomahaara_Room 3+4.pdf
      • 11
        1EO1-04 Large High-Temperature Superconducting 2D SQIF arrays
        Speaker: Shane T Keenan (CSIRO)
      • 12
        1EO1-05 Scanning SQUID Microscopy for Sensing Vector Magnetic Field
        Speaker: The Dang Vu (Department of Physics and electronics, Osaka Prefecture University)
        1EO1-05_The Dang Vu_Room 3+4.pdf
      • 13
        1EO1-06 Flip-chip high-Tc DC SQUID magnetometer with a ferromagnetic flux antenna
        Speaker: Michael Faley (Peter Grünberg Institute,)
        1EO1-06_Michael Faley_Room 3+4_update.pdf
      • 14
        1EO1-07 Phase sensitive imaging of the currents in planar superconductive resonator
        Speaker: Alexandre Karpov (National University of Science and Technology (MISIS))
    • 1LO1 - FCL / SMEs CICG - Room 1 (Geneva )

      CICG - Room 1

      Geneva

      • 15
        1LO1-01 Siemens’ first MV SFCL installed in a public grid – aspects from design to operation and operational experience
        Speaker: Tabea Arndt (Siemens AG)
      • 16
        1LO1-02 Resistive superconducting fault current limiter for 220 kV Moscow grid
        Speaker: Moyzykh Mikhail (S-Innovations)
        1LO1-02_Mikhail Moyzykh_Room 1.pdf
      • 17
        1LO1-03 SmartCoil –Shielded Core Reactor for Current Limitation on the Distribution Level
        Speaker: Kudymow Andrej (Karlsruhe Institute of Technology)
        1LO1-03_Andrej Kudymow_Room 1.pdf
      • 18
        1LO1-05 The DRYSMES4GRID project: development of a cryogen free cooled SMES demonstrator based on MgB2
        Speaker: Antonio Morandi (University of Bologna - DEI)
        1LO1-05_Antonio Morandi_Room 1.pdf
      • 19
        1LO1-06 Development of round flexible HTS CORC® wires for fault current limiting applications
        Speaker: Jeremy Weiss (Advanced Conductor Technologies)
        1LO1-06_Jeremy Weiss_Room 1.pdf
      • 20
        1LO1-07 A new EC project: FASTGRID
        Speaker: Pascal Tixador (Grenoble-INP)
        1LO1-07_Pascal Tixador_Room 1.pdf
      • 21
        1LO1-
    • 1MO1 CICG - Room 2

      CICG - Room 2

      Geneva
      • 22
        1MO1-01 Universal Lower Limit on Vortex Creep in Superconductors
        Speaker: Serena Eley (Serena Eley)
        1MO1-01_Serena Eley_Room_2.pdf
      • 23
        1MO1-02 Self-field critical currents of practical superconductors
        Speaker: Evegny Talantsev (Robinson Research Institure, Victoria University of Wellington)
        1MO1-02_Evgeny Talantsev_Room 2_update.pdf
      • 24
        1MO1-03 Micro-straining tuning for strong and isotropic artificial pinning centers in YBCO films
        Speaker: Judy Wu (University of Kansas)
        1MO1-03_Judy Wu_Room 2.pdf
      • 25
        1MO1-04 Progress towards YBa2Cu3O7-δ nanocomposite thin films using chemical solution deposition and preformed nanocrystals
        Speaker: Katrien De Keukeleere (Ghent University)
        1MO1-04_Katrien De Keukeleere_Room 2.pdf
      • 26
        1MO1-05 High-field Jc properties of MOD-(Y,Gd)Ba2Cu3Oy coated conductors with BaHfO3 nanoparticles
        Speaker: Tatsunori Okada (High Field Laboratory for Superconducting Materials, IMR, Tohoku University)
        1MO1-05_Tatsunori Okada_Room 2.pdf
      • 27
        1MO1-06 The challenging pinning landscape of YBa2Cu3O7 thin films
        Speaker: Bernart Mundet (Institut de Ciència de Materials de Barcelona)
        1MO1-06_Bernat Mundet_Room 2.pdf
      • 28
        1MO1-07 High field superconducting characteristics at low temperature of SmBa2Cu3Ox coated conductor with artificial pinning center
        Speaker: Yutaka Yoshida (Nagoya university)
        1MO1-07_Yutaka Yoshida_Room_2.pdf
    • 12:15
      Lunch break CICG

      CICG

      Geneva
    • Poser : 1EP3 - Squids CICG

      CICG

      Geneva
      • 29
        1EP3-01 Ultrasound-Induced Magnetic Imaging of Tumors Targeted by Biofunctional Magnetic Nanoparticles
        Speaker: Jen-Jie Chieh (National Taiwan Normal University)
      • 30
        1EP3-02 Rapid and quantitative discrimination of tumour cells on tissue slices
        Speaker: Herng-Er Horng (National Taiwan Normal University)
      • 31
        1EP3-03 Investigation of geomagnetic orientation preserved in a stain containing iron compounds using a vector-type SQUID magnetometer
        Speaker: Yoshiaki Adachi (Kanazawa Institute of Technology)
      • 32
        1EP3-04 Detection of Biological Targets Using HTS SQUID and Magnetic Markers
        Speaker: Keiji Enpuku (Kyushu University)
      • 33
        1EP3-05 Ion implantation generation of normal/superconducting junctions for fabrication of all niobium SQUIDs
        Speaker: Yanping Zhang (Sumitomo Heavy industries, Ltd.)
      • 34
        1EP3-06 Development of eddy current testing system using HTS-SQUID on a hand card for detection of fatigue cracks of steel plate used in highway roads
        Speaker: Akira Tsukamoto (SUSTERA)
      • 35
        1EP3-07 Analysis of AC Impedance in Localized Region Using Magnetic Field Distribution Measured by HTS-SQUID
        Speaker: Kenji Sakai (Okayama University)
      • 36
        1EP3-08 Ultra-sensitive SQUID system for pulsed field applications
        Speaker: Rainer Körber (Physikalisch-Technische Bundesanstalt)
      • 37
        1EP3-10 Cryogenic Current Comparators for larger beamlines
        Speaker: Paul Seidel (University of Jena)
      • 38
        1EP3-12 Adaptive suppression of power line interference in ultra-low field magnetic resonance imaging in an unshielded environment
        Speaker: Quan Tao (Shanghai Institute of Microsystem and Information Technology (SIMIT),Chinese Academy of Sciences)
      • 39
        Low liquid helium consumption SQUID system with liquid nitrogen cooling interlayer for biomagnetism
        Speaker: Li Lu (Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences)
      • 40
        1EP3-14 Detection of pressure-overloaded left ventricular hypertrophy based on current dipole estimation from magnetocardiograms of rats using HTS-SQUID system
        Speaker: Yuto Tsukamoto (WASEDA University)
      • 41
        1EP3-15 The Study of Several System Key Parameters for the Measurement of Airborne Superconducting Full Tensor Magnetic Gradient
        Speaker: Jun Wu (Shanghai Institute of Microsystem and Information Technology Chinese Academy of Sciences)
      • 42
        1EP3-16 Superconductive Resonator Configuration with Flux-Focuser as Ground Plane for RF-SQUID Magnetometer
        Speaker: Fatemeh Qaderi (Sharif University of Technology)
      • 43
        1EP3-17 SQUID magnetometer system for high-sensitivity measurement of geomagnetic signals
        Speaker: Jun Kawai (Applied Electronics Laboratory, Kanazawa Institute of Technology)
      • 44
        1EP3-18 Measurement of Magnetic Nanoparticles by Small HTS SQUID Array
        Speaker: Saburo Tanaka (Toyohashi University of Technology)
      • 45
        1EP3-19 High-Tc SQUID detected low-field NMR and MRI for biomedical application
        Speaker: Shu-Hsien Liao (National Taiwan Normal University)
      • 46
        1EP3-20 Development of a LTS-SQUID Based Airborne Full Tensor Gradiometers
        Speaker: Longqing Qiu (Shanghai Institute of Microsystem And Information Technology, CAS)
      • 47
        1EP3-22 Cryptophane-Caged Xe-129 Relaxation Agent in Ultra-low Field NMR/MRI Based on High-Tc SQUID Detection
        Speaker: Quan Tao (Forschungszentrum Jülich)
      • 48
        1EP3-23 High sensitivity analysis of the magnetization properties of magnetic nanoparticles changed by the viscosity of the water solution using HTS-SQUID
        Speaker: Ryota Isshiki (Okayama University)
      • 49
        1EP3-24 Multipoint measurement of T (0, 1) mode guided wave using HTS-SQUID gradiometer
        Speaker: Natsuki Masutani (Kindai University)
      • 50
        1EP3-25 Sensitivity improvement of sample rotation measurement method in HTS-SQUID magnetometer for measurement of diamagnetic materials
        Speaker: Yuta Nakamura (Okayama University)
    • Poster : 1EP1 - Circuit Application & System CICG

      CICG

      Geneva
      • 51
        1EP1-01 Arrays of stacked SNS Josephson junctions for pulse-driven Josephson voltage standards
        Speaker: Oliver Kieler (Physikalisch-Technische Bundesanstalt (PTB))
      • 52
        1EP1-03 A fast wire-routing method and an automatic layout tool for RSFQ digital circuits considering wire-length matching
        Speaker: Nobutaka Kito (Chukyo University)
        1EP1-03_Kito Nobutaka.pdf
      • 53
        1EP1-04 Logic Design of a 16-bit Bit-Slice Arithmetic Logic Unit for 32-/64-bit RSFQ Microprocessors
        Speaker: Guang-Ming Tang (Institute of Computing Technology, Chinese Academy of Sciences)
      • 54
        1EP1-05 Die size requirements versus capability for SFQ SPGAs in multilayer fabrication processes
        Speaker: Coenrad Fourie (Stellenbosch University)
      • 55
        1EP1-06 Microarchitectures for energy-efficient computing implemented in adiabatic quantum-flux-parametron logic
        Speaker: Christopher Ayala (Institute of Advanced Sciences - Yokohama National University)
      • 56
        1EP1-07 Fabrication and Characterization of NbN-based Magnetic Josephson Junctions
        Speaker: Li Feng (SIMIT)
      • 57
        1EP1-08 Superconducting And Cryogenic Environments For Quantum Technologies
        Speaker: Ziad Melhem (Oxford Instruments)
      • 58
        1EP1-09 Superconducting and flexible multilayer high density interconnect
        Speaker: Samuel d'Hollosy (Hightec MC AG)
        1EP1-09_d'Hollosy Samuel.pdf
      • 59
        1EP1-10 Characterization of Frequency-Dependent Nonlinear Effects in Pulse-Bias Waveform Synthesis
        Speaker: Christine Donnelly (NIST)
      • 60
        1EP1-11 Inductance Extraction of Superconducting Structures in the Presence of Magnetic Materials
        Speaker: Kyle Jackman (Stellenbosch University, Department of Electrical and Electronic Engineering)
      • 61
        1EP1-12 Design and implementation of AQFP-based register files for an AQFP 4-bit RISC microprocessor prototype
        Speaker: Qiuyun Xu (Yokohama National University)
      • 62
        1EP1-13 Charge-based superconducting digital logic family using quantum phase-slip junctions
        Speaker: Uday Goteti (Auburn University)
        1EP1-13_Goteti Uday.pdf
      • 63
        1EP1-14 Parallel Adders for Low-Pass Phase Modulation-Demodulation ADCs
        Speaker: Timur Filippov (HYPRES)
      • 64
        1EP1-15 High-Resolution Characterization of Josephson Junctions and Magnetic Multilayers for Low-Power, Superconducting Logic and Memory Devices
        Speaker: Nancy Missert (Sandia National Laboratories)
      • 65
        1EP1-16 Timing Characterization and Enabling Static Timing Analysis in Rapid Single Flux Quantum Circuits
        Speaker: Massoud Pedram (University of Southern California, Department of Electrical Engineering, Los Angeles, CA, USA)
      • 66
        1EP1-17 Superconducting NbTi Flex Cables for High-Density Interconnects
        Speaker: Robin Cantor (STAR Cryoelectronics)
    • Poster : 1EP2 - Detectors, sensors and other devices CICG

      CICG

      Geneva
      • 67
        1EP2-03 Characterizing Thick Electroplated Bismuth Films as Hard X-ray TES Absorbers
        Speaker: Lisa Gades (Argonne National Laboratory)
      • 68
        1EP2-04 Influence of YBaCuO ultrathin film characteristics and front end features on HEB THz mixer performance
        Speaker: Alain Kreisler (CentraleSupelec - GeePs)
      • 69
        1EP2-05 Hybrid superconducting mesa-structure with spin filtering manganite interlayer
        Speaker: Kare'n Constantinian (Kotel’nikov Institute of Radio Engineering and Electronics of Russian Academy of Sciences)
      • 70
        1EP2-06 MgB2 films for superconducting detectors
        Speaker: Sergey Cherednichenko (Chalmers University of Technology)
      • 71
        1EP2-08 Phase-Slip Events in MoRe-Si(W)-MoRe heterostructures
        Speaker: Pascal Febvre (Université Savoie Mont Blanc)
      • 72
        1EP2-09 Frequency Response Characteristics Analysis of High Detectivity Backside Illuminated Free-Membrane Type IR Superconducting Bolometer
        Speaker: Roya Mohajeri (Sharif University of Technology)
      • 73
        1EP2-10 The Characteristics of THz Metamaterials based on YBCO Superconductor
        Speaker: Chiu-Hsien Wu (Department of Physics, National Chung Hsing University)
      • 74
        1EP2-11 Progress of pulse-driven AC Josephson voltage standards at PTB
        Speaker: Johannes Kohlmann (PTB)
      • 75
        1EP2-12 High-temperature superconducting nano-meanders made by high energy ion irradiation
        Speaker: Paul Amari (LPEM UMR 8213, ESPCI Paris)
      • 76
        1EP2-14 Transition Edge Sensors for Quench Localisation in SRF Cavity Testing
        Speaker: Tobias Stegmaier (CERN)
      • 77
        1EP2-15 Development of transition edge sensors for the application in real-time multispectral-fluorescence-microscopy
        Speaker: Katja Peiselt (Leibniz Insitut für Photonische Technologien)
        1EP2-15_Peiselt Katja.pdf
      • 78
        1EP2-16 Superconducting noise bolometer with microwave bias and readout for terahertz array applications
        Speaker: Artem Kuzmin (Karlsruhe Institute of Technology)
      • 79
        1EP2-17 Effects of thermal parameters and boundary resistances of MgO substrate on the response of YBCO transition edge bolometers
        Speaker: Rana Nazifi Takantapeh (Sharif University of Technology)
      • 80
        1EP2-18 Design and Optimization of a Terahertz Metamaterial Absorber for YBCO Superconductive Transition Edge Bolometer
        Speaker: Fatemeh Qaderi (Sharif University of Technology)
      • 81
        1EP2-19 Focused He+-Ion Beam High Temperature Superconducting narrow nanowires
        Speaker: Cheryl Feuillet-Palma (ESPCI Paris - LPEM - UMR 8213)
      • 82
        1EP2-20 Self-Monitoring, "SMART" REBCO coated conductors
        Speaker: Federico Scurti (North Carolina State University)
      • 83
        1EP2-21 Proximity induced superconducting properties in high mobility two-dimensional electron gas quantum well in In0.75Ga0.25As heterostructures
        Speaker: Kaveh Delfanazari (Centre for Advanced Photonics and Electronics, University of Cambridge)
      • 84
        1EP2-22 Noise temperature characterisations of YBCO step-edge junction terahertz mixer operating at temperatures above 40 K
        Speaker: Jia Du (Research Scientist CSIRO Manufacturing)
    • Poster : 1LP1 - Cables for accelerator magnets CICG

      CICG

      Geneva
      • 85
        1LP1-01 3D shape and cross sectional inhomogeneity of Nb3Sn superconducting wires in Rutherford cables
        Speaker: Christian Scheuerlein (Fraunhofer Institute for Industrial Mathematics (ITWM), Kaiserslautern, Germany and University of Kaiserslautern (TUK), Kaiserslautern, Germany)
      • 86
        1LP1-03 Critical Current Measurements of Nb3Sn Rutherford Cables under Transverse Pressure
        Speaker: Jean-Eudes Duvauchelle (CERN)
      • 87
        1LP1-04 Characterization of Nb3Sn Rutherford cable degradation due to strand cross over
        Speaker: Jerome Fleiter (CERN)
      • 88
        1LP1-05 Study on the Nb3Sn Rutherford Cable for High-Energy Accelerators
        Speaker: Yanmin Zhu (Western Superconducting Technologies Co., Ltd)
      • 89
        1LP1-06 Sheared Subelement Length in MQXF Cables made from RRP(R) Strands
        Speaker: Ian Pong (Berkeley Lab)
      • 90
        1LP1-07 Two-layers Rutherford Cable – Possible Solution for High Field Superconducting Magnet
        Speaker: Vitaly Vysotsky (Russian Scientific R&D Cable Institute)
      • 91
        1LP1-08 Thermal analysis of a superconducting bus-bar for SIS100 particle accelerator at FAIR
        Speaker: Lukasz Tomkow (Lukasz Tomkow)
        1LP1-08_Tomkow Lukasz.pdf
      • 92
        1LP1-10 Phased Array Ultra Sounds Non Destructive Tests of Soldered Current-Carrying Bus-Bar Splices of Superconducting Magnets
        Speaker: Rosario Principe (CERN)
      • 93
        1LP1-11 Comparison of mechanical concepts for Nb3Sn high field accelerator magnets
        Speaker: Mr Christian Löffler (CERN)
        Comparison of mechanical concepts for Nb3Sn high field accelerator magnets-POSTER.pdf
    • Poster : 1LP2 - High field, NMR magnets and cables CICG

      CICG

      Geneva
      • 94
        1LP2-02 In-house Industrial Assembly of the Superconducting Conductor for the 43 T Hybrid Magnet at LNCMI-Grenoble
        Speaker: Pierre Pugnat (CNRS/LNCMI-Grenoble)
        1LP2-02_Pugnat Pierre.pdf
      • 95
        1LP2-03 Engineering Of New Class Of High Field Magnets For Research Application
        Speaker: Ziad Melhem (Oxford Instruments)
      • 96
        1LP2-04 Shimming and Regulating a 36-T Hybrid Magnet for High Resolution NMR
        Speaker: William Brey (Florida State University - NHMFL)
      • 97
        1LP2-05 Development of 400 MHz Cryogen Free Magnets for MAS Solid State NMR Spectroscopy
        Speaker: Jeremy Good (Cryogenic Ltd)
      • 98
        1LP2-07 Conduction cooling system for a 400 MHz HTS NMR magnet
        Speaker: Sehwan In (Korea Institute of Machinery and Materials)
      • 99
        1LP2-08 Design of a superconducting sensing structure with SQUIDs for sensitive gravity measurement
        Speaker: Xinning Hu (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 100
        1LP2-09 A Superconducting Magnet System for Animal Imaging System
        Speaker: Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 101
        1LP2-10 Recent development of the 25 T all-superconducting NMR magnet at IEE
        Speaker: Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
    • Poster : 1LP3 - AC losses CICG

      CICG

      Geneva
      • 102
        1LP3-01 Inter-strand resistance in REBCO Roebel cables and effect on AC loss
        Speaker: Simon Otten (Karlsruhe Institute of Technology)
      • 103
        1LP3-03 Ac loss calculation of a cosine-theta dipole magnet wound with coated conductors considering iron yoke influence
        Speaker: Yusuke Sogabe (Kyoto University)
        1LP3-03_Sogabe Yusuke.pdf
      • 104
        1LP3-04 AC loss in REBCO stator windings of superconducting motors for electric and hybrid aircrafts
        Speaker: Enric Pardo (Institute of Electrical Engineering, SAS)
        1LP3-04_Pardo Enric.pdf
      • 105
        1LP3-05 Simulations of electromagnetic behaviors of joint in YBCO coated conductors with 3D finite-element analysis
        Speaker: Huadong Yong (Lanzhou University)
      • 106
        1LP3-06 Influence of Three Phases Imbalance on the AC Losses of Tri-axial HTS CORC Cable used in an All-Electric Aircraft
        Speaker: Zixuan Zhu (University of Bath)
      • 107
        1LP3-07 Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft
        Speaker: Yawei Wang (University of Bath)
      • 108
        1LP3-08 Quench propagation in Rutherford MgB2 cables
        Speaker: Álvaro Cubero (Instituto de Ciencia de Materiales de Aragón (ICMA), CSIC – Universidad de Zaragoza)
        1LP3-08_Cubero Álvaro.pdf
      • 109
        1LP3-09 Calculation of interstrand coupling losses in superconducting Rutherford cables with a continuum model
        Speaker: Marco Breschi (University of Bologna)
      • 110
        1LP3-11 Dynamic resistance measurement in a four-tape YBCO stack
        Speaker: Zhenan Jiang (Victoria University of Wellington)
        1LP3-11_Jiang Zhenan.pdf
      • 111
        1LP3-12 Analysis of AC loss in different stacks of YBCO superconducting tapes
        Speaker: Changxin Chi (Shanghai University/Shanghai Key Laboratory of High Temperature Superconductors)
      • 112
        1LP3-13 AC Losses in HTS Coils for Wireless Power Transfer Applications
        Speaker: Boyang Shen (University of Cambridge)
      • 113
        1LP3-14 Simulation of linear generator made of HTS pancake coils stack
        Speaker: Sukru Yildiz (Ahi Evran University)
      • 114
        1LP3-15 Measurements of crossed-field demagnetisation rate of trapped field magnets at 20-77 K and high frequencies
        Speaker: Algirdas Baskys (University of Cambridge)
      • 115
        1LP3-17 Dragging hysteresis forces in a linear displacer with Coated Conductor Stacks
        Speaker: José López (Physics Departament, UPC Barcelona Tech)
        1LP3-17_López José.pdf
      • 116
        1LP3-18 Magnetization of rectangular 2G HTS stacks and dragging forces developed inside a multipolar magnetic channel: trapped field, current distribution and forces
        Speaker: Miquel Carrera (Institut de Ciència de Materials de Barcelona, ICMAB-CSIC)
        1LP3-18_Carrera Miquel.pdf
      • 117
        1LP3-20 AC loss in HTS fusion cables: measurements, modeling and scaling laws
        Speaker: Nikolay Bykovsky (EPFL Swiss Plasma Center)
        1LP3-20_Bykovsky Nikolay.pdf
      • 118
        1LP3-21 Multi-scale Model for AC Loss Calculation in Large-scale HTS-SMES
        Speaker: Ying Xu (Huazhong University of Science and Technology)
        1LP3-21_Xu Ying.pdf
      • 119
        1LP3-22 Effect of striation in assembled coated conductors
        Speaker: Naoyuki Amemiya (Kyoto University)
      • 120
        1LP3-23 Transport AC loss measurements in bifilar stacks composed of YBCO coated conductors
        Speaker: Wenjuan Song (Beijing Jiaotong University, China; Victoria University of Wellington, New Zealand)
        1LP3-23_Song Wenjuan.pdf
    • Poster : 1LP4 - Levitation, transportation and propulsion CICG

      CICG

      Geneva
      • 121
        1LP4-01 The measurement and modeling of the levitation force between single grain YBCO bulk superconductors and permanent magnets
        Speaker: Antonio Morandi (University of Bologna - DEI)
      • 122
        1LP4-02 Comparative analysis of the specific characteristics of the magnetic bearings with HTS elements
        Speaker: Ekaterina Kurbatova (National Research University "Moscow Power Engineering Institute")
        1LP4-02_Kurbatova Ekaterina.pdf
      • 123
        1LP4-04 Bulk superconductor levitation devices: Advances in and prospects for development
        Speaker: Uta Floegel-Delor (Adelwitz Technologiezentrum GmbH (ATZ))
      • 124
        1LP4-05 Increase of levitation properties owing to high magnetic field in magnetic levitation system with magnetic shielding effect of HTS bulks
        Speaker: Naohiro Negishi (Sophia University)
      • 125
        1LP4-06 Thermal characteristics of a 400mm diameter levitating rotor in a superconducting magnetic bearing operating below at 10K for a CMB polarization experiment
        Speaker: Yuki Sakurai (Kavli IPMU (WPI), UTIAS, The University of Tokyo)
      • 126
        1LP4-07 Simulation of magnetization and heating processes in HTS tapes stacks
        Speaker: Irina Anishchenko (National Research Nuclear University MEPhI)
        1LP4-07_Anishchenko Irina.pdf
      • 127
        1LP4-08 Prototype of a Rings based zero-field-cooled (ZFC) YBCO magnetic bearing
        Speaker: António Arsénio (IDMEC, Instituto Superior Técnico, Universidade de Lisboa)
        1LP4-08_Arsénio António.pdf
      • 128
        1LP4-09 Fabrications and Cooling Tests on Conduction Cooled HTS Coils with Heat Pipes
        Speaker: Jun Tokushige (Kagoshima University)
      • 129
        1LP4-10 Influence of magnetic field configuration on levitation force for HTS tapes stack
        Speaker: Dmitry Abin (National Research Nuclear University MEPhI)
      • 130
        1LP4-12 The levitation force of CC-tapes stack at different temperatures.
        Speaker: Maxim Osipov (National Research Nuclear University MEPhI)
        1LP4-12_Osipov Maxim.pdf
      • 131
        1LP4-13 Effect of Anisotropic Magnetization of HTS Bulk superconductors with Different Shapes on Suspension Rotational Loss
        Speaker: Wenjiang Yang (Beihang University)
      • 132
        1LP4-15 High-Tc Superconducting Maglev Prototype Vehicle Running at a 160 km/h in an Evacuated Circular Test Track
        Speaker: Yong Zhao (Southwest Jiaotong University)
        1LP4-15_Zhao Yong.pdf
    • Poster : 1LP5 - Motors, generators and other rotating machines CICG

      CICG

      Geneva
      • 133
        1LP5-03 Electrical Losses and Temperature Distribution Analysis of a HTS Motor Considering PWM Schemes in Voltage Source Inverter
        Speaker: Ji Hyung Kim (Dept. of Electrical Engineering, Jeju National University)
      • 134
        1LP5-04 Numerical Analyses on Influences of Armature Winding Shape and Yoke Arrangements on Total Losses in Fully Superconducting Synchronous Motors Using REBCO Tapes
        Speaker: Akifumi Kawagoe (Kagoshima University)
      • 135
        1LP5-05 Comparative Characteristics of Rotary HTS Flux-pump considering Rotational State of HTS Load
        Speaker: Jeyull Lee (Yonsei University)
      • 136
        1LP5-06 Design of a DC Transformer by an HTS Homopolar Motor-Generator Set
        Speaker: Seyon Lee (Korea Polytechnic University)
      • 137
        1LP5-08 Experiments and Modelling of a Synchronous-Hysteresis Superconducting Machine with Stacks of Second Generation Tapes
        Speaker: Guilherme Goncalves Sotelo (Universidade Federal Fluminense)
        1LP5-08_Goncalves Sotelo Guilherme.pdf
      • 138
        1LP5-09 Superconductors under dynamic electromagnetic conditions in electric machines
        Speaker: Peter O'Brien (Queensland University of Technology)
        1LP5-09_O'Brien Peter.pdf
      • 139
        1LP5-10 Reduction and elimination of ac-losses in the superconducting super motor
        Speaker: Minaru Kawamura (Okayama University of Science)
      • 140
        1LP5-12 Fabrication of a scaled MgB2 racetrack demonstrator pole for a 10 MW direct drive wind turbine generator
        Speaker: Niklas Magnusson (SINTEF Energy Research)
        1LP5-12_Magnusson Niklas.pdf
      • 141
        1LP5-13 A Novel Axial-Flux Magnetic Gear Using Stationary HTS Excitation
        Speaker: Peng Gao (China University of Petroleum)
      • 142
        1LP5-14 Test of a Rotary HTS Flux-pump using Electromagnet for Constant Field Current of HTS Synchronous machine
        Speaker: Haeryong Jeon (Yonsei University)
      • 143
        1LP5-15 Study on the optimal arrangement according to the purpose of superconducting bulk.
        Speaker: Kazuhito Yamagishi (Yokohama National University)
      • 144
        1LP5-16 Relationship between Eccentricity and Amplitude of a Rotor Having a Non-uniform Magnetization Distribution Supported by a Superconducting Magnetic Bearing
        Speaker: Hirotaka Ishii (Graduate School of Science and Technology Keio University)
      • 145
        1LP5-19 3D Modeling of Coils for Pulsed Field Magnetization of HTS Bulk Pellets Placed on an Inductor of a Superconducting Electrical Machine
        Speaker: Kévin Berger (GREEN - University of Lorraine)
      • 146
        1LP5-20 Characterization of oriented and non-oriented electrical steels using the Epstein frame and a magnetic core, at room and cryogenic temperatures
        Speaker: Anabela Pronto (UNINOVA-Centro de Tecnologia e Sistemas)
      • 147
        1LP5-21 Lorentz Force Velocimetry based on HTS bulk magnet system
        Speaker: Oleksii Vakaliuk (Technische Universität Ilmenau)
    • Poster : 1LP6 - Transformers, SMES and fault current limiters CICG

      CICG

      Geneva
      • 148
        1LP6-01 Current limiting cooperation of superconducting transformers and cables
        Speaker: Takayuki Tokuchi (Kyushu University)
      • 149
        1LP6-02 Fault tolerant HTS transformers: increasing the fault withstand time and recovery current
        Speaker: Mike Staines (Robinson Research Institute, Victoria University of Wellington)
        1LP6-02_Yazdani Asrami Mohammad.pdf
      • 150
        1LP6-03 Hybrid HTS-copper transformer of large turn-to-turn ratio
        Speaker: Mariusz Stepien (Silesian University of Technology)
      • 151
        1LP6-04 The proposal of contact cooling system for superconducting transformer winding made of parallel tapes with transpositioners
        Speaker: Beata Kondratowicz-Kucewicz (Electrotechnical Institute)
      • 152
        1LP6-05 Proposal to substitute Roebel cable with parallel tapes with clusters of transpositioners in modular construction of superconducting transformer windings
        Speaker: Grzegorz Wojtasiewicz (Electrotechnical Institute)
      • 153
        1LP6-06 Considerations of HTS 2G superconducting transformer temperature during short circuit
        Speaker: Grzegorz Wojtasiewicz (Electrotechnical Institute)
      • 154
        1LP6-07 The new concept of using the superconducting transformers in low and medium voltage distribution network
        Speaker: Slawomir Kozak (Electrotechnical Institute)
      • 155
        1LP6-08 Optimization and analysis of a spherical 3-phase transformer having 2G HTS windings
        Speaker: Paweł Lasek (Silesian University of Technology, Falculty of Electrical Engineering)
      • 156
        1LP6-13 Enhancing Fault Ride Through Capability and Transient Stability of DFIG with SMES-FCL
        Speaker: Zixuan Zheng (Sichuan University)
      • 157
        1LP6-14 Application of Superconducting Magnetic Energy Storage for Stabilizing the Grid Integrated with Wind Power Generation Systems - A Review
        Speaker: Vutukuru Vasudeva Rao (Indian Institute of Technology KHARAGPUR)
      • 158
        1LP6-15 Modeling and analysis of superconducting fault current limiter for system integration of battery banks
        Speaker: Doaa M. Yehia (Tanta University)
      • 159
        1LP6-16 Improving Voltage Stability in DC Distribution Systems Using Small Scale Superconducting Magnetic Energy Storage
        Speaker: Doaa M. Yehia (Tanta University)
      • 160
        1LP6-18 Design of a Medium Voltage Superconducting Series Reactor for a Grid-Connected Power Engineering Research Site
        Speaker: Mohamed Fayaz Khan (University of KwaZulu Natal)
        1LP6-18_Khan Mohamed Fayaz.pdf
      • 161
        1LP6-19 Superconducting Power Filter for DC Electrical Grids
        Speaker: Loïc Queval (GeePs, CentraleSupélec, Univ. Paris-Saclay)
      • 162
        1LP6-20 Effective Grid Integration of Superconducting Magnetic Energy Storage Using Current-Fed Z-Source Converter
        Speaker: Diaa-Eldin A. Mansour (Tanta University)
    • Poster : 1LP7 - FCL : design and devices CICG

      CICG

      Geneva
      • 163
        1LP7-01 Comparison of shell vs. core-type magnetic circuits in the performance of inductive superconducting fault current limiters under asymmetric faults
        Speaker: Joao Murta-Pina (Centre of Technology and Systems (Uninova))
      • 164
        1LP7-02 Analysis of the effects of different types of faults in three-phase saturated cores SFCL
        Speaker: Nuno Vilhena (FCT / UNL)
      • 165
        1LP7-03 Peak Current Limiting Characteristics of Transformer Type SFCL with Two Non-Isolated Secondary Windings
        Speaker: Tae-Hee Han (Jungwon University)
      • 166
        1LP7-04 SFCL cooling characteristics according to the control variables
        Speaker: Hankil Yeom (KIMM)
      • 167
        1LP7-06 Comparison of dual peak current limiting with current source location of a series-connected SFCL using two iron cores
        Speaker: Seok-Cheol Ko (Kongju National University)
      • 168
        1LP7-07 Volume Effect of Dynamic Breakdown Strength in LN2 for Insulation Design of Resistive Superconducting Fault Current Limiters
        Speaker: Naoki Hayakawa (Nagoya University)
      • 169
        1LP7-08 Magnetizing Characteristics of a Flux-Lock-Type SFCL with Two Magnetic Paths Using Its Third Winding
        Speaker: Sung-Hun Lim (Soongsil University)
      • 170
        1LP7-09 Engineering design and test of low-resistance high temperature superconducting short-circuited coils
        Speaker: Joao Murta-Pina (Centre of Technology and Systems (Uninova))
      • 171
        1LP7-10 Improvement of recovery characteristics of resistive SFCL made by GdBCO tape with several surface conditions under pressurized condition
        Speaker: Satoshi Takaya (Kyoto University)
        1LP7-10_Takaya Satoshi.pdf
      • 172
        1LP7-11 Increase of the normal resistivity of REBCO tapes for 320 kV superconducting fault current limiters
        Speaker: Guillaume Escamez (NEXANS/SuperGRID)
      • 173
        1LP7-12 Winding Design and AC Loss Analysis of a 10-kV / 500-A Flux-coupling type Superconducting Fault Current Limiter
        Speaker: Sinian Yan (State Key Laboratory of Advanced Electromagnetic Engineering and Technology,Huazhong University of Science and Technology)
        1LP7-12_Yan Sinian.pdf
      • 174
        1LP7-13 Magnetizing Characteristics of Transformer Type SFCL with Additional Secondary Winding Due to Its Winding Direction
        Speaker: Shin-Won Lee (Jungwon University)
      • 175
        1LP7-14 Measurements of electromechanical forces in superconducting fault current limiters tapes under short circuit conditions
        Speaker: Anabela Pronto (UNINOVA-CTS)
      • 176
        1LP7-15 A Design Methodology for Optimisation of three-phase SFCL of Saturated Cores Type
        Speaker: Nuno Vilhena (FCT / UNL)
      • 177
        1LP7-16 Operation of a SCFCL at 65 K
        Speaker: Pascal Tixador (Grenoble INP)
      • 178
        1LP7-17 Research on the Magnetic Property of Saturated Iron-core Superconducting Fault Current Limiter
        Speaker: Chi Zhang (Huazhong University of Science and Technology)
        1LP7-17_Zhang Chi.pdf
      • 179
        1LP7-18 Experiment and design of new type DC superconducting fault current limiter
        Speaker: Chaoqun Zhao (Tianjin University)
      • 180
        1LP7-19 Design, building and test of a 220V/300A braid type superconducting fault current limiter
        Speaker: Fei Liang (Bath University)
      • 181
        1LP7-20 Experiments on a new type of DC superconducting fault current limiter
        Speaker: Ying Xin (Tianjin University)
      • 182
        1LP7-21 HTS Power devices with low cryo-consumption for current conditioning, switching and limiting
        Speaker: Alexander Usoskin (Bruker HTS GmbH)
        1LP7-21_Usoskin Alexander.pdf
      • 183
        1LP7-22 Short-Circuit Current Limitation Through 2G YBCO Resistive-Type SFCL Devices: Technical and Economic Comparison with Traditional Air-Core Reactors
        Speaker: Giuliano Angeli (Ricerca sul Sistema Energetico - RSE S.p.A.)
        1LP7-22_Angeli Giuliano.pdf
      • 184
        1LP7-23 Experimental tests and analysis of a small-scale Noval Hybrid Type DC SFCL Prototype
        Speaker: Siyuan Liang (School of electrical and electronic engineering, Huazhong University of Science and Technology; State Key Laboratory of Advanced Electromagnetic Engineering and Technology)
        1LP7-23_Liang Siyuan.pdf
      • 185
        1LP7-24 Preliminary Investigation on Economic Aspects of Superconducting Magnetic Energy Storage (SMES) Systems and High Temperature Superconducting Transformers (HTST)
        Speaker: Weijia Yuan (Florida State University Center for Advanced Power Systems)
    • Poster : 1MP1 - Strain and Irradiation CICG

      CICG

      Geneva
      • 186
        1MP1-01 Microstructure and mechanical properties of high manganese steel processed by cold working and aging at 4.2K
        Speaker: Yi Shi (Institute of Plasma Physics)
        1MP1-01_Jin Huan_SHI.pdf
      • 187
        1MP1-02 Effects of rolling deformation on the critical current under transverse stress of PIT Nb3Sn wires
        Speaker: Luc Gamperle (University of Geneva, Departement of Quantum Matter Physics)
      • 188
        1MP1-03 X-ray Stress Measurement of CrN coated Practical Nb3Sn Superconducting Wire
        Speaker: Shutaro Machiya (Daido University)
      • 189
        1MP1-04 Characterization of irreversible degradation of Nb3Sn Rutherford cables due to transversal compression stress at room temperature
        Speaker: Patrick Ebermann (CERN)
        1MP1-04_Patrick Ebermann.pdf
      • 190
        1MP1-05 Axial tensile stress-strain characteristics of WST high Jc Nb3Sn strands
        Speaker: Huajun Liu (Institute of Plasma Physics, Chinese Academy of Sciences)
      • 191
        1MP1-06 E-WASP, a facility to test strain, temperature, magnetic field and current effects on superconducting samples
        Speaker: Luigi Muzzi (ICAS S.C.r.l.)
        1MP1-06_Quagliata Tamisari Federico.pdf
      • 192
        1MP1-07 Prediction of Strain Degradation in Superconducting Accelerator Magnets Nb3Sn Coils Using Exponential Scaling Laws
        Speaker: Giorgio Vallone (CERN)
        1MP1-07_Vallone Giorgio.pdf
      • 193
        1MP1-09 Influence of the microstructure on the pinning force scaling behavior of Nb3Sn wires
        Speaker: Thomas Baumgartner (TU Wien, Atominstitut)
        1MP1-09_Baumgartner Thomas.pdf
      • 194
        1MP1-10 Fast neutron irradiation on K doped Ba-122 Single Crystals
        Speaker: Daniel Kagerbauer (TU Wien, Atominstitut)
        1MP1-10_Kagerbauer Daniel.pdf
      • 195
        1MP1-11 Effects of proton irradiation on the vortex dynamics of Fe(Se,Te) thin films
        Speaker: Valeria Braccini (CNR-SPIN)
      • 196
        1MP1-12 Numerical simulation of die compaction of Mg and B powder mixture using pressure-dependent constitutive model
        Speaker: Young-Seok Oh (Korea Institute of Materials Science)
      • 197
        1MP1-13 Improvement of the tensile and bending stress tolerance on MgB2 wire made by In-situ method
        Speaker: Hideki Tanaka (Hitachi)
        1MP1-13_Tanaka Hideki.pdf
    • Poster : 1MP2 - Cuprate Thin Films 1/2 CICG

      CICG

      Geneva
      • 198
        1MP2-01 Vortex pinning study on epitaxial YBa2Cu3O7-x thin film grown on decorated MgO(001) single crystal substrates with La0.66Sr0.33MnO3 nano-islands
        Speaker: Traian Petrisor Jr. (Technical University of Cluj-Napoca)
      • 199
        1MP2-02 Ink-jet printing of low-fluorine YBCO nanocomposite thin films with preformed HfO2 nanocrystals
        Speaker: Hannes Rijckaert (Ghent University)
      • 200
        1MP2-03 Double-sided inkjet printed YBCO films on CZO/YSZ buffered sapphire substrates
        Speaker: Roxana Vlad (Oxolutia SL)
      • 201
        1MP2-05 Effects of Zr Doping on Magnetic and Structural Properties of DyBa2Cu3O7-d Thin Films
        Speaker: Yuri Aparecido Opata (DTU Energy - Technical University of Denmark)
      • 202
        1MP2-06 TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy films on CeO2 buffered R-Al2O3 substrates
        Speaker: Keita Sakuma (Seikei University)
      • 203
        1MP2-07 Microwave-assisted YBCO precursors: A fast and reliable method towards chemical precursors for superconducting thin films
        Speaker: Hannes Rijckaert (Ghent University)
      • 204
        1MP2-08 Preparation of YBa2Cu3O7-δ and (La0.85Sr0.15)2CuO4 multilayered structure for superconducting connection
        Speaker: Yuhei Shimizu (National Institute of Advanced Industrial Science and Technology)
      • 205
        1MP2-09 Preparation of YBa2Cu3O7 - BaMO (M=Zr, Hf) superconductor nanocomposite using colloidal solution with preformed nanoparticles
        Speaker: Ziliang Li (Institut de Ciència de Materials de Barcelona, CSIC)
      • 206
        1MP2-10 The influence of seed layer on the structure and superconducting property of BaHfO3 doped Y0.5Gd0.5Ba2Cu3O7-δ film prepared by pulsed laser deposition
        Speaker: Linfei Liu (Shanghai Jiao Tong University)
        1MP2-10_Liu Linfei.pdf
      • 207
        1MP2-12 The phase stability diagram of GdBa2Cu3O7-δ for the nominal composition and refinement of oxide inclusion in GdBCO films in low oxygen pressures
        Speaker: Insung Park (Department of Material Science and Engineering, Research Institute of Advanced Materials (RIAM), Seoul National University, Korea)
      • 208
        1MP2-13 Synthesis and characterization of Y(1-x)NdxBa2Cu3O7-δ High Temperature Superconductors by Acetate Method
        Speaker: Marcelo Neves (Uerj)
        1MP2-13_Silva Ana Carolina.pdf
      • 209
        1MP2-14 High growth rate of YBCO films by Transient Liquid Assisted Growth by oxygen partial pressure control
        Speaker: Silvia Rasi (Universitat de Girona)
      • 210
        1MP2-15 Impact of Humidity and the Additive 2,4-Pentanedione during the Pyrolysis of Gd0.5Y0.5Ba2Cu3O7-x Superconductors Prepared by Chemical Solution Deposition
        Speaker: Carl Buehler (Karlsruhe Institute of Technology)
      • 211
        1MP2-16 Role of Oxygen exchange kinetics in the engineering of carrier concentration of YBa2Cu3O7-δ films
        Speaker: Alexander Stangl (ICMAB-CSIC)
      • 212
        1MP2-17 Effect of oxygen partial pressure during annealing process on the epitaxy of LZO buffer layer for coated conductors
        Speaker: Ping Ji (Northwest Institute for Nonferrous Metal Research, Xi’an 710016, P. R. China)
    • Poster : 1MP3 - Measurement Techniques 1/2 CICG

      CICG

      Geneva
      • 213
        1MP3-02 Experimental and numerical investigation of shielding performances of superconducting shields using CC tapes
        Speaker: Yoh Nagasaki (GeoCosmo Science and Research Center)
      • 214
        1MP3-03 Exploitation-generated changes in the resistance-temperature characteristics of the coal resistors (TVO)
        Speaker: Kamil Kozłowski (Joint Institute for Nuclear Research)
        1MP3-03_Kozłowski.pdf
      • 215
        1MP3-04 Selecting FBG coatings for optical fiber sensing of Quench in high temperature superconductor
        Speaker: Yanchao Liu (Beijing Jiaotong university)
        1MP3-04_Liu Yanchao.pdf
      • 216
        1MP3-05 Efficient cooling for electric current transport stability in superconducting materials
        Speaker: Francesco Avitabile (Dipartimento di Fisica, Università degli Studi di Salerno)
      • 217
        1MP3-07 Determination of the complete penetration magnetic field of a HTS pellet from the measurements of the magnetic field at its top-center surface
        Speaker: Bruno Douine (UBO)
      • 218
        1MP3-08 Comparison of magnetizing characteristics of superconducting bulk magnet cooled by　Stirling and GM refrigerators during pulsed field magnetization
        Speaker: Kazuya Yokoyama (Ashikaga Institute of Technology)
        1MP3-08_Yokoyama Kazuya.pdf
      • 219
        1MP3-11 High resolution imaging of magnetic flux distributions in superconductors with scanning x-ray microscopy at low temperatures
        Speaker: Stephen Ruoß (Max-Planck-Institute for Intelligent Systems Stuttgart)
        1MP3-11_Ruoß Stephen.pdf
      • 220
        1MP3-12 Development of Image Analysis Techniques for Quantitative Microscopy on Superconducting Materials
        Speaker: Peter Lee (Applied Superconductivity Center, NHMFL, FSU)
      • 221
        1MP3-13 Correlating magnetic flux distributions with superconductor microstructure using magnetic force microscopy
        Speaker: Josef Hazi (Oxford University)
    • Poster : 1MP4 - Flux Pinning Non-Cuprates CICG

      CICG

      Geneva
      • 222
        1MP4-01 Correlation of the microstructure and magnetic properties of neutron irradiated Nb3Sn superconductors
        Speaker: Stephan Pfeiffer (TU Wien)
        1MP4-01_Pfeiffer Stephan.pdf
      • 223
        1MP4-02 High performance MgB2 bulks using carbon-coated amorphous boron and silver addition
        Speaker: Masaki Higuchi (Shibaura Institute of Technology)
      • 224
        1MP4-03 Experimental evaluation for characteristics of MgB2 Rutherford cables with a large current capacity
        Speaker: Sora Mizuochi (Sophia University)
      • 225
        1MP4-04 Flux pinning by InAs nanorods in Nb
        Speaker: Dong Ho Kim (Yeungnam University)
        1MP4-04_Kim Dong Ho.pdf
      • 226
        1MP4-06 Local probing of superconducting condensate
        Speaker: Ritika Panghotra (KU Leuven)
      • 227
        1MP4-08 Anisotropy Effects on the Quenching Current of FeSeTe Thin Films
        Speaker: Antonio Leo (Department of Physics "E. R. Caianiello", University of Salerno, and CNR-SPIN, Salerno)
      • 228
        1MP4-09 Analysis of flux pinning forces in bulk superconductors for applications
        Speaker: Michael Koblischka (Saarland University)
      • 229
        1MP4-10 Enhanced critical current density in bulk MgB2
        Speaker: Miryala Muralidhar (Shibaura Institute of Technology)
    • Poster : 1MP5 - Magnetization and Trapped Field + AC Losses 1/2 CICG

      CICG

      Geneva
      • 230
        1MP5-01 Magnetic study of the low temperature anomalies in the optimally doped PrBCO compound
        Speaker: Mahieddine Lahoubi (Badji-Mokhtar Annaba University, Faculty of Sciences,)
      • 231
        1MP5-02 Electromagnetic field analysis of a twisted superconducting strip with sweeping magnetic field
        Speaker: Yoichi Higashi (National Institute of Advanced Industrial Science and Technology)
      • 232
        1MP5-04 Magnetic Measurements of the Critical Current Density in HTS Tapes in the Field Range up to 30T with self-field corrections.
        Speaker: Andrew Smith (University of Durham)
        1MP5-04_Smith Andrew.pdf
      • 233
        1MP5-05 Accurate Loss Estimation of Coated Conductors in External Magnetic Fields: Dynamic Loss and Magnetisation Loss
        Speaker: Quan Li (University of Edinburgh)
      • 234
        1MP5-06 Magnetization of YBCO film with ac travelling magnetic waves of relatively short wavelengths
        Speaker: Wei Wang (No.24 South Section 1, Yihuan Road)
      • 235
        1MP5-07 Magnetization Loss Characteristics of a Pancake Coil Fabricated by GdBCO Tape in kHz Frequency Band
        Speaker: Ryota Inoue (Tohoku University)
      • 236
        1MP5-08 Theoretical evaluation of the screening-current-induced field in HTS coils with tape wires
        Speaker: Yasunori Mawatari (National Institute of Advanced Industrial Science and Technology (AIST))
      • 237
        1MP5-09 AC Loss Analysis of High Temperature Superconducting Conductors on Round Core
        Speaker: Seyeon Lee (Korea Polytechnic University)
        1MP5-09_Choi Kyeongdal.pdf
      • 238
        1MP5-10 Measurements and numerical modelling of magnetization loops in two level undercut-profile substrate-based filamentary coated conductors
        Speaker: Andrea Insinga (Technical University of Denmark)
      • 239
        1MP5-11 Magnetization AC losses in flat Al sheated MgB2 cables
        Speaker: Ján Kováč (Institute of Electrical Engineering Slovak Academy of Science)
      • 240
        1MP5-12 Magnetization profiles of AC type-II superconducting wires subject to constant sources of magnetic field
        Speaker: Harold Steven Ruiz (University of Leicester)
      • 241
        1MP5-14 Electromagnetic response of DC type-II superconducting wires under oscillating magnetic excitations
        Speaker: Bright Chimezie Robert (University of Leicester)
      • 242
        1MP5-15 Numerical Analysis of AC Losses in YBCO Conductors Carrying AC Transport Current with Defect under AC Magnetic Field
        Speaker: Wei Chen (Southwest Jiaotong University)
        1MP5-15_Chen Wei.pdf
    • Poster : 1MP6 - MgB2 1/2 CICG

      CICG

      Geneva
      • 243
        1MP6-01 Magnetic Microscopy for Nondestructive Characterization of Local Critical Current Distribution in Multi-filamentary MgB2 Wires with Magnetic Sheath Materials
        Speaker: Shuhei Bochi (Kyushu University)
        1MP6-01_Bochi Shuhei.pdf
      • 244
        1MP6-03 Achievements of high pressure MgB2 synthesis: can in situ samples reach mass density and grain connectivity of Mg diffusion samples?
        Speaker: Tomasz Cetner (Institute of High Pressure Physics PAS)
      • 245
        1MP6-04 Effect of sintering conditions on modified IMD wire deformed by hydroextrusion
        Speaker: Miloslav Kulich (Institute of Electrical Engineering)
      • 246
        1MP6-05 Aging of commercial MgB2 wires in liquid hydrogen
        Speaker: Wilfried Goldacker (Karlsruhe Institute of Technology)
      • 247
        1MP6-06 Development and characterization of a multifilamentary MgB2 superconducting wire
        Speaker: Durval Rodrigues Jr (Escola de Engenharia de Lorena - Universidade de São Paulo)
        1MP6-06_Da Silva Lucas Barboza Sarno.pdf
      • 248
        1MP6-07 Effect of Bi mixing routes on MgB2 superconductors
        Speaker: Kookchae Chung (Korea Institute of Materials Science)
      • 249
        1MP6-08 The Effect of Bi-2212 Addition on The Superconducting Properties of Bulk MgB2 Samples
        Speaker: Meryem Alp (Ankara University)
      • 250
        1MP6-09 Magneto-optical, microstructural and magnetization measurements of in situ Fe/MgB2 conductors made from ball-milled precursor
        Speaker: Elena Martínez (ICMA (CSIC - Universidad de Zaragoza))
        1MP6-09_Martínez Elena.pdf
      • 251
        1MP6-11 Optimization of high isostatic pressure annealing processes for fabrication of MgB2 and Ba(Fe,Co)2As2 superconducting wires with high critical current density
        Speaker: Andrzej Morawski (Institute of High Pressure Physics Polish Academy of Sciences Unipress)
      • 252
        1MP6-12 Composite superconducting MgB2 wires made by continuous process
        Speaker: Bartek A. Glowacki (Department of Materials Science and Metallurgy, University of Cambridge)
        1MP6-12_Glowacki Bartek A..pdf
      • 253
        1MP6-13 Effects of Dy2O3 doping on the Anisotropy and Transport of MgB2 wires
        Speaker: Mike Sumption (MSE, The OHio State University)
    • Poster : 1MP7 - Coated Conductors 1/2 CICG

      CICG

      Geneva
      • 254
        1MP7-01 The influence of laser energy density on microstructure and critical current of YGBCO and HGBCO films prepared by PLD
        Speaker: Xiang Wu (Shanghai Jiao Tong University)
        1MP7-01_Wu Xiang.pdf
      • 255
        1MP7-02 Development of textured YBa2Cu3O7−x superconducting coated conductors by Fluorine-Free MOD Route
        Speaker: Jingyuan Chu (Shanghai Jiao Tong University)
      • 256
        1MP7-03 Enhanced flux pinning in TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy+BaZrO3 coated conductors by introducing an intermediate heat treatment
        Speaker: Michio Sato (Seikei University)
      • 257
        1MP7-05 Tactical approaches in pilot-line manufacturing of HTS coated conductors for high field magnet application
        Speaker: Ulrich Betz (Bruker HTS GmbH)
      • 258
        1MP7-06 Fabrication of HTS coated conductors via advanced high speed PLD process in Compact Pilot Line
        Speaker: Alexander Usoskin (Bruker HTS GmbH)
      • 259
        1MP7-07 Enhancement of flux pinning by random pinning centers at 4.2 K in BaHfO3-doped SmBa2Cu3Oy coated conductors
        Speaker: Shun Miura (Kyushu University)
      • 260
        1MP7-08 Effect of twin boundaries on the in-field Jc for TFA-MOD-(Y0.77Gd0.23)Ba2Cu3Oy wires
        Speaker: Ryota Oku (Seikei University)
      • 261
        1MP7-10 Heating tolerance of critical current in industrial coated conductors
        Speaker: Davide Uglietti (EPFL)
      • 262
        1MP7-12 Soldered contacts for HTS coated conductors
        Speaker: Kai Ackermann (Karlsruhe Institute of Technology)
      • 263
        1MP7-13 Investigation Of Soldered Low-Resistance Joints For Commercial Coated Conductors Depending On Various Contact Pressures
        Speaker: Pavel Degtyarenko (Joint Institute for High temperature of Russian Academy of Sciences)
      • 264
        1MP7-14 Determination of irreversible strain and stress limits of practical REBCO CC tapes under uniaxial tension
        Speaker: Hyung-Seop Shin (Andong National University)
      • 265
        1MP7-15 Joint resistance characteristics of REBCO CC lap-joints using ultrasonic welding method in various temperatures and magnetic fields
        Speaker: Mark A. Diaz (Andong National University)
      • 266
        1MP7-17 Development of a reel-to-reel process for laser structuring of coated conductors
        Speaker: Rainer Nast (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP))
        1MP7-17_Nast Rainer.pdf
      • 267
        1MP7-18 Increased pinning strength in 2nd generation REBCO coated conductors grown by liquid assisted processes.
        Speaker: John Feighan (University of Cambridge)
        1MP7-18_Feighan John.pdf
      • 268
        1MP7-19 Joining of second generation coated conductor tapes using a melt-texturing route
        Speaker: Hagen Bryja (IFW Dresden)
      • 269
        1MP7-20 Coated superconducting tape model based on distribution of currents between the tape layers. Computing implementation
        Speaker: Alfredo Álvarez (University of Extremadura)
        1MP7-20_Álvarez Alfredo.pdf
      • 270
        1MP7-21 Correlation between resistances of face-to-face soldered joints and interface resistance between layers in superconducting tapes
        Speaker: Nadezda Bagrets (Karlsruhe Institute of Techology)
      • 271
        1MP7-22 Coated conductor HTS tape for energy and magnet applications
        Speaker: Markus Bauer (THEVA Dünnschichttechnik GmbH)
        1MP7-22_Bauer Markus.pdf
    • 15:30
      Coffee Break CICG

      CICG

      Geneva
    • 1P2 - Lessons learned CICG - room 1

      CICG - room 1

      Geneva
      • 272
        2P2-01 The LHC Main Magnet Electrical Interconnections: the Subtle Size of Superconductivity
        Speaker: Lucio Rossi (CERN)
        2P2-01_Lucio Rossi_Room 1.pdf
      • 273
        2P2-02 Some of the lessons learned during the construction and use of super magnets conductors in the last decades
        Speaker: Roberto Penco (P.R.D. sas Genova)
        2P2-02_Roberto Penco_Room 1.pdf
      • 274
        2P2-03 Learning from R&D and operation of HTS insert coil for high field magnet
        Speaker: Satoshi Awaji (Tohoku University)
      • 275
        2P2-04 Transformation and perspectives of digital superconducting electronics
        Speaker: Oleg Mukhanov (Hypres)
        2P2-04_Oleg A. Mukhanov_Room 1.pdf
    • 18:00
      Exhibitor Reception CICG

      CICG

      Geneva
  • Tuesday 19 September
    • 2P1 - Plenary 2 CICG - Room 1

      CICG - Room 1

      Geneva
    • 2EO1 - Invited Orals CICG - Room 3+4

      CICG - Room 3+4

      Geneva
    • 2LO1 - Invited Orals CICG - Room 1 (Geneva )

      CICG - Room 1

      Geneva

      • 279
        2LO1-01 Manufacturing of LTS and HTS magnets for heavy-ion rotating gantry
        Speaker: Shigeki Takayama (Toshiba Corporation)
      • 280
        2LO1-02 Superconducting Cyclotrons for Hadron Radiotherapy
        Speaker: Dr Joseph Minervini (Massachusetts Institute of Technology)
        2LO1-02_Joseph Minervini_Room 1.pdf
    • 2MO1 - Invited Orals CICG - Room 2

      CICG - Room 2

      Geneva
    • 09:50
      Coffee Break CICG

      CICG

      Geneva
    • 2EO2 - Novel Devices and concepts CICG - Room 3+4 (Geneva )

      CICG - Room 3+4

      Geneva

      • 283
        2EO2-01 Controllable transfer of spin-polarized Cooper pairs into a half-metal manganite
        Speaker: Jason Robinson (Department of Materials Science)
      • 284
        2EO2-02 Road to scalable superconducting phase memory devices
        Speaker: Sergey Bakurskiy (NUST MISIS)
        2EO2-02_Sergey Bakurskiy_Room 3+4.pdf
      • 285
        2EO2-03 Superconducting spintronics with high-temperature superconductors
        Speaker: Angelo Di Bernardo (University of Cambridge)
      • 286
        2EO2-04 Non-monotonic temperature dependence of magnetoresistance in Nb-Ni-Nb planar junctions below superconducting transition
        Speaker: Ekta Bhatia (National Institute of Science Education and Research)
        2EO2-04_Ekta Bhatia_Room 3+4.pdf
      • 287
        2EO2-05 Signatures of unconventional superconductivity in oxide based 2DEG
        Speaker: Daniela Stornaiuolo (Department of Physics, University of Naples "Federico II" and CNR-SPIN Napoli)
        2EO2-05_Daniela Stornaiuolo_Room 3+4.pdf
      • 288
        2EO2-06 Phase dynamics and macroscopic quantum phenomena in hybrid Josephson junctions
        Speaker: Davide Massarotti (Dipartimento di Fisica, Università degli Studi di Napoli Federico II - CNR-SPIN UOS Napoli)
        2EO2-06_Davide Massarotti_Room 3+4.pdf
      • 289
        2EO2-07 Quantum Voltage Standard Developments at NIST
        Speaker: Sam Benz (NIST)
        2EO2-07_Sam Benz_Room 3+4.pdf
    • 2LO2 - Rotating Machines and other Large Size Applications CICG - Room 1 (Geneva )

      CICG - Room 1

      Geneva

      • 290
        2LO2-01 Status of the Ecoswing project
        Speaker: Markus Bauer (THEVA Dünnschichttechnik GmbH)
        2LO2-01_Markus Bauer_Room 1.pdf
      • 291
        2LO2-02 Space research experiments with bulk superconductors
        Speaker: Frank N. Werfel (Adelwitz Technologiezentrum GmbH (ATZ))
        2LO2-02_Frank N. Werfel_Room 1.pdf
      • 292
        2LO2-03 Superconducting Medium Speed Synchronous Electrical Generator for 2MW Class Wind Mills
        Speaker: Xavier Granados (ICMAB-CSIC)
        2LO2-03_Xavier Granados_Room 1.pdf
      • 293
        2LO2-04 Development of a 8 kW HTS Axial Flux Machine for Electrical Aircraft Propulsion
        Speaker: min zhang
        2LO2-04_Min Zhang_room 1.pdf
      • 294
        2LO2-05 Loss Analysis of a 3 MW HTS Ship Propulsion Motor
        Speaker: Toshiyuki Yanamoto (Kawasaki Heavy Industories, Ltd.)
        2LO2-05_Toshiyuki Yanamoto_Room 1.pdf
      • 295
        2LO2-06 Comparison of Levelized Cost of Energy of superconducting direct drive generators for a 10 MW offshore wind turbine
        Speaker: Asger Bech Abrahamsen (DTU Wind Energy, Technical University of Denmark)
        2LO2-06_Asger Bech Abrahamsen_Room 1.pdf
      • 296
        2LO2-07 A novel magnetic bearing using 2G double crossed loops
        Speaker: Flávio Martins (Universidade Federal do Rio de Janeiro)
        2LO2-07_Flávio Martins_Room 1.pdf
    • 2MO2 - Strain, Irradiation, Imaging CICG - Room 2 (Geneva )

      CICG - Room 2

      Geneva

      • 297
        2MO2-01 Characterisation of accelerator magnet coils and coil constituents using neutron and synchrotron sources
        Speaker: Christian Scheuerlein (CERN)
        2MO2-01_Christian Scheuerlein_Room 2.pdf
      • 298
        2MO2-02 Spatial Distributions of Flexural Strength in TSMG and TSIG YBCO Bulk Superconductors
        Speaker: Kai Yuan (Danny) Huang (University of Cambridge)
        2MO2-02_Kai Yuan (Danny) Huang_Room 2.pdf
      • 299
        2MO2-03 Influence of artificial pinning centers on the radiation resistance of coated conductors
        Speaker: David Fischer (Technische Universität Wien)
        2MO2-03_David Fischer_Room 2.pdf
      • 300
        2MO2-04 Effects of swift-particle irradiations on the critical current density in FeSe
        Speaker: Tsuyoshi Tamegai (The University of Tokyo)
        2MO2-04_Tsuyoshi Tamegai_Room 2.pdf
      • 301
        2MO2-05 The number of displacement per atom (dpa), a universal parameter describing the decrease of Tc in superconducting accelerator magnets
        Speaker: Rene Louis Jacques Flukiger (Universite de Geneve)
        2MO2-05_René Flükiger_Room 2.pdf
      • 302
        2MO2-06 Tailored design of vortex behaviour and its visualisation with high-speed magneto-optical video
        Speaker: Alexey V. Pan (Institute for Superconducting and Electronic Materials, University of Wollongong)
        2MO2-06_Alexey V Pan_Room 2.pdf
      • 303
        2MO2-07 Magneto-Optical Imaging Of Ac Suscetibility In Superconducting Thin Films
        Speaker: Wilson Ortiz (Departamento de Fisica, Universidade Federal de Sao Carlos)
        2MO2-07_Wilson Ortiz_Room 2.pdf
      • 304
        2MO2-08 Observations of deformation effects on A15 production in Nb3Sn Powder In Tube wires
        Speaker: Chris Segal (National High Magnetic Field Laboratory)
        2MO2-08_Christopher Segal_Room 2.pdf
    • 12:15
      Lunch break CICG

      CICG

      Geneva
    • 2LO3 - Fusion and Medical Applications CICG - Room 1

      CICG - Room 1

      Geneva
      • 305
        2LO3-01 Overcoming the Challenges of the ITER Magnets
        Speaker: Neil Mitchell
        2LO3-01_Neil Mitchell_Room 1.pdf
      • 306
        2LO3-02 Manufacturing the European superconducting TF coils for ITER
        Speaker: Marc Cornelis (Fusion for Energy)
        2LO3-02_Marc Cornelis_Room 1.pdf
      • 307
        2LO3-03 Damage investigations in the HTS cable prototype after the cycling test in EDIPO
        Speaker: Nikolay Bykovsky (EPFL Swiss Plasma Center)
        2LO3-03_Nikolay Bykovsky_Room 1.pdf
      • 308
        2LO3-04 Recent progress in development of Bi2212 Cable-in-Conduit Conductor
        Speaker: Shi Yi (Institute of Plasma Physics, CAS and ASIPP)
        2LO3-04_Shi Yi_Room 1.pdf
      • 309
        2LO3-05 Stability Analysis of the 100 kA-class HTS STARS Conductor
        Speaker: Yoshiro TERAZAKI (National Institute for Fusion Science)
        2LO3-05_Yoshiro Terazaki_Room 1.pdf
      • 310
        2LO3-06 Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems
        Speaker: Matt Rindfleisch (Hyper Tech Research)
        2LO3-06_Matt Rindfleisch_Room 1.pdf
      • 311
        2LO3-07 Development of High Stable Magnetic Field HTS Magnet System for MRI
        Speaker: Shoichi Yokoyama (Mitsubishi Electric Corporation,Advanced Technology R & D Center)
        2LO3-07_Shoichi Yokoyama_Room 1.pdf
    • 2MO3 - Fe-based CICG - Room 2 (Geneva )

      CICG - Room 2

      Geneva

      • 312
        2MO3-01 Recent progress in Fe-based superconducting wires and tapes
        Speaker: Yanwei Ma (Institute of Electrical Engineering, Chinese Academy of Sciences)
        2MO3-01_Yanwei Ma_Room 2.pdf
      • 313
        2MO3-02 Fe(Se,Te) epitaxial thin films deposited on metallic alloys with or without buffer layer
        Speaker: Valeria Braccini (CNR-SPIN)
        2MO3-02_Valeria Braccini_Room 2.pdf
      • 314
        2MO3-03 Flux pinning behaviour of a BaFe2(As1-xPx)2 thin film on IBAD-MgO technical substrate
        Speaker: Jena Hänisch (Karlsruhe Institute of Technology)
        2MO3-03_Jens Hänisch_Room 2.pdf
      • 315
        2MO3-04 The key microstructural factors for high transport current in randomly oriented 122 polycrystalline materials
        Speaker: Akiyasu Yamamoto (Tokyo University of Agriculture and Technology)
        2MO3-04_Akiyasu Yamamoto_Room 2.pdf
      • 316
        2MO3-05 High performance Ba0.6K0.4Fe2As2 superconducting tapes at high magnetic field and high temperature with hot-pressing process
        Speaker: He Huang (Institute of Electrical Engineering, Chinese Academy of Science)
        2MO3-05_He Huang_Room 2.pdf
      • 317
        2MO3-06 In-plane anisotropy of the critical current density in detwinned Co doped Ba122 single crystals
        Speaker: Johannes Hecher (TU Wien, Atominstitut)
        2MO3-06_Johannes Hecher_Room 2.pdf
      • 318
        2MO3-07 Critical current density and the phase diagram of CaKFe4As4 single crystals
        Speaker: Shiv Jee Singh (University of Oxford)
        2MO3-07_Shiv Jee Singh_Room 2.pdf
    • 2MO4 - Progress in HTS Conductor Industry CICG - Room 3+4

      CICG - Room 3+4

      Geneva
      • 319
        2MO4-01 Double-disordered HTS coated conductors and their assemblies aimed for ultra-high fields: large area tapes
        Speaker: Ulrich Betz (Bruker HTS GmbH)
        2MO4-01_Ulrich Betz_Room 3+4.pdf
      • 320
        2MO4-02 Progress of Wire Development and Process Improvement on 2G HTS at SuperPower
        Speaker: Drew Hazelton (SuperPower Inc.)
        2MO4-02_Drew Hazelton_Room 3+4.pdf
      • 321
        2MO4-03 Developement of long-length BMO doped REBCO coated conductors by hot-wall PLD process
        Speaker: Shinji Fujita (Fujikura Ltd.)
        2MO4-03_Shinji Fujita_Room 3+4.pdf
      • 322
        2MO4-04 Development of 2G HTS wire production at SuperOx
        Speaker: Alexander Molodyk (S-Innovations)
        2MO4-04_Alexander Molodyk_Room 3+4.pdf
      • 323
        2MO4-05 Progress in SuNAM’s Coated Conductor Manufacturing
        Speaker: Hunju Lee (SuNAM Co., Ltd.)
        2MO4-05_Hunju Lee_Room 3+4.pdf
      • 324
        2MO4-06 Cost-effective production of HTS wires by chemical solution deposition
        Speaker: Michael Baecker (Deutsche Nanoschicht GmbH)
        2MO4-06_Michael Baecker_Room 3+4.pdf
      • 325
        2MO4-07 Multi-deposited inkjet printed YBCO on IBAD-MgO arquitectures for coated conductors
        Speaker: Alberto Calleja (OXOLUTIA SL)
        2MO4-07_Alberto Calleja_Room 3+4.pdf
      • 326
        2MO4-08 Progress of REBCO coated conductor program at SJTU and SSTC
        Speaker: Yijie Li (Shanghai Jiao Tong University)
        2MO4-08_Yijie Li_Room 3+4.pdf
      • 327
        2MO4-09 Thick Films of REBaCuO/YBaCuO and Long-length Coated Conductors Derived by Reel-to-Reel Metallorganic Solution and Ion-beam Assisted Depositions
        Speaker: Chuanbing Cai (Shanghai Key Laboratory of High Temperature Superconductors,Shanghai University/Shanghai Creative Superconductor Technologies Co. Ltd.)
        2MO4-09_Chuanbing Cai_Room 3+4.pdf
      • 328
        2MO4-10 Advances in Bi-2223 wire for High Field Applications
        Speaker: Shin-ichi Kobayashi (Sumitomo Electric Industries, Ltd.)
        2MO4-10_Shin-ichi Kobayashi_Room 3+4.pdf
      • 329
        2MO4-11 2G HTS Coated Conductors Buffer Stack Architecture Improvements at STI
        Speaker: Jeong-Uk Huh (Superconductor Technologies Inc)
        2MO4-11_Jeong-Uk Huh_Room 3+4.pdf
    • 15:31
      Coffee Break CICG

      CICG

      Geneva
    • 2IO1 - Industry Session - Superconductivity: From Industry to Society CICG - Room 1

      CICG - Room 1

      Geneva
    • Outreach event F. Gianotti Uni Dufour (Geneve)

      Uni Dufour

      Geneve
  • Wednesday 20 September
    • 3P1 - Plenary 3 CICG - Room 1 (Geneva )

      CICG - Room 1

      Geneva

    • 3EO1 - Invited Orals CICG Room 3+4 (Geneva )

      CICG Room 3+4

      Geneva

    • 3LO1 - Invited Orals CICG Room 1 (Geneva )

      CICG Room 1

      Geneva

    • 3MO1 - Invited Orals CICG Room 2

      CICG Room 2

      Geneva
      • 339
        3MO1-01 New superconductors: waiting for room temperature (?)
        Speaker: Gianni Profeta (Department of Physical and Chemical Sciences and SPIN-CNR)
        3MO1-01_Gianni Profeta_Room 2.pdf
      • 340
        3MO1-02 A new chance for Bi-2212 wires to boost their applications in high magnetic fields
        Speaker: andrea malagoli (CNR-SPIN)
        3MO1-02_Andrea Malagoli_Room 2.pdf
    • 09:50
      Coffee Break CICG

      CICG

      Geneva
    • 3LO2 - HTS Magnets and Cables CICG Room 1 (Geneva )

      CICG Room 1

      Geneva

      • 341
        3LO2-01 Review of HTS cables for large magnets
        Speaker: Davide Uglietti
        3LO2-01_Davide Uglietti_Room 1.pdf
      • 342
        3LO2-02 Generation of 25 T: field quality and field profile measurements of a 4 T REBCO insert coil for a 21 T LTS magnet
        Speaker: Christian Barth (University of Geneva, Department of Quantum Matter Physics)
        3LO2-02_Christian Barth_Room 1.pdf
      • 343
        3LO2-03 First fully European CORC cables
        Speaker: Michal Vojenciak (Institute of Electrical Engineering SAS)
        3LO2-03_Michal Vojenciak_Room 1.pdf
      • 344
        3LO2-04 Current progress of High-temperature superconducting CORC® magnet cable and wire development
        Speaker: Jeremy Weiss (University of Colorado)
        3LO2-04_Jeremy Weiss_Room 1.pdf
      • 345
        3LO2-05 Transposed high current cables made with strong, rectangular Bi2212 superconductor wire
        Speaker: Alexander Otto (Solid Material Solutions, LLC)
        3LO2-05_Alexander Otto_Room 1.pdf
      • 346
        3LO2-06 An HTS Magnet Demonstrator for Space Experiment
        Speaker: Gijs De Rijk (CERN)
        3LO2-06_Gijs de Rijk_Room 1.pdf
      • 347
        3LO2-07 Results of the Development of a High Current HTS Cable for Accelerator Magnet Applications
        Speaker: Luca Bottura (CERN)
        3LO2-07_Luca Bottura_Room 1.pdf
    • 3LO3 - Quench Protection CICG Room 2 (Geneva )

      CICG Room 2

      Geneva

      • 348
        3LO3-01 Overview of the Quench Heater Performance for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC.
        Speaker: Susana Izquierdo Bermudez (CERN)
        3LO3-01_Susana Izquierdo Bermudez_Room 2.pdf
      • 349
        3LO3-02 Stability, quench, and current sharing in Roebel and CORC cables for HEP magnets
        Speaker: Mike Sumption (The Ohio State University)
        3LO3-02_Mike Sumption_Room 2.pdf
      • 350
        3LO3-03 Quench detection for HTS magnets using acoustic thermometry
        Speaker: Maxim Marchevsky (Lawrence Berkeley National Lab. (US))
        3LO3-03_Maxim Marchevsky_Room 2.pdf
      • 351
        3LO3-04 A novel quench detection method using radio frequency wave technology
        Speaker: Hu Yanlan (Institute of plasma physics chinese academy od sciences)
        3LO3-04_Hu Yanlan_Room 2.pdf
      • 352
        3LO3-05 Quench detection via Rayleigh backscattering interrogated optical fibers
        Speaker: Federico Scurti (NCSU)
        3LO3-05_Federico Scurti_Room 2.pdf
      • 353
        3LO3-07 Normal zone propagation velocity and surface temperature mapping in HTS coated conductors during quench
        Speaker: Roland Gyuráki (Karlsruhe Institute of Technology)
        3LO3-07_Roland Gyuraki_Room 2.pdf
      • 354
        3LO3-08 AC losses and inter-strand resistance in impregnated ReBCO Roebel cables
        Speaker: Peng Gao (University of Twente)
        3LO3-08_Peng Gao_Room 2.pdf
    • 3MO2 - Magnetisation and Trapped Field CICG Room 3+4 (Geneve)

      CICG Room 3+4

      Geneve
      • 355
        3MO2-01 Magnetic Flux Invasion and Field-Capturing in Pulsed-Field Magnetization for Layered MgB2 Bulk Magnets
        Speaker: Tetsuo Oka (Niigata University)
        3MO2-01_Tetsuo Oka_Room 3+4.pdf
      • 356
        3MO2-02 The successful incorporation of Ag into YBa2Cu3O7 bulk superconductors
        Speaker: Jasmin Congreve (University of Cambridge)
        3MO2-02_Jasmin Congreve_Room 3+4.pdf
      • 357
        3MO2-03 Towards optimisation of multi-pulse, multi-temperature pulsed field magnetisation of bulk high-temperature superconductors
        Speaker: Mark Ainslie (University of Cambridge)
        3MO2-03_Mark Ainslie_Room 3+4.pdf
      • 358
        3MO2-04 Progress in trapped field magnets made from stacks of coated conductor tape
        Speaker: Anup Patel (Univeristy of Cambridge, Department of Materials Science and Metallurgy)
        3MO2-04_Anup Patel_Room 3+4.pdf
      • 359
        3MO2-05 Magnetic Microscopy for Magnetic Relaxation in RE-123 Coated Conductor with DC Transport Current and External Magnetic Field
        Speaker: Kohei Hisajima (Kyushu University)
        3MO2-05_Kohei Hisajima_Room 3+4.pdf
      • 360
        3MO2-06 AC susceptibility analysis of coated conductor tapes
        Speaker: Fedor Gömöry (Slovak Academy of Sciences)
        3MO2-06_Fedor Gömöry_Room 3+4.pdf
      • 361
        3MO2-07 AC Losses of Roebel Cables with Striated 2G YBCO Strands
        Speaker: Yifeng Yang
        3MO2-07_Yifeng Yang_Room 3+4.pdf
      • 362
        3MO2-08 A finite element analysis of flux pumping in high Tc superconductors
        Speaker: Archie Campbell (University of Cambridge)
        3MO2-08_Archie Campbell_Room 3+4.pdf
    • 12:15
      Lunch break CICG

      CICG

      Geneva
    • Poster : 3EP1 - Microwave devices and SQUID application CICG

      CICG

      Geneva
      • 363
        3EP1-01 Josephson parametric amplifiers based on quadratic nonlinearity of rf SQUIDs operating at 4.2 K
        Speaker: Marat Khabipov (Physikalisch-Technische Bundesanstalt)
      • 364
        3EP1-03 Utilizing HTS Resonators as NMR Transmit Coils
        Speaker: William Brey (Florida State University - NHMFL)
      • 365
        3EP1-04 Analysis of characteristics of Al MKID resonators
        Speaker: Takashi Noguchi (National Astronomical Observatory)
      • 366
        3EP1-05 A RF test vehicle for superconductor electronics interconnect
        Speaker: Vladimir Talanov (Northrop Grumman Corp.)
      • 367
        3EP1-06 Study of Impedance Optimization between Modelling and Measurement of a Ka-band HTS MMIC Josephson Mixer
        Speaker: Ting Zhang (University of Technology Sydney)
      • 368
        3EP1-07 Trimming Mechanism of External Quality Factor in HTS Bandpass Filter using Bulk Resonator
        Speaker: Atsushi Saito (Yamagata University)
      • 369
        3EP1-08 Coupled superconducting resonators for tunneling-defect studies and qubit applications
        Speaker: Bahman Sarabi (University of Maryland - College Park)
      • 370
        3EP1-09 Development of near infrared and visible Kinetic Inductance Detectors (KIDs) for astronomy
        Speaker: Samir Beldi (GEPI, Observatoire de Paris, PSL Research University, CNRS)
      • 371
        3EP1-10 Two Dimensional Scanning of Intermodulation Distortion in Superconducting Resonators
        Speaker: Stephen Remillard (Hope College Physics Department)
        3EP1-10_Remillard Stephen.pdf
      • 372
        3EP1-11 Long period of time cooling technique using liquid nitrogen for HTS-SQUID systems
        Speaker: Tsunehiro Hato (Superconducting sensing technology research association)
      • 373
        3EP1-12 Miniaturized Multi-Band HTS Bandpass Filter Design Using Single Perturbed Multimode Resonator with Multi-Transmission Zeros
        Speaker: Jiaming Tang (Xiamen University)
        3EP1-12_Tang Jiaming.pdf
      • 374
        3EP1-13 Compact Quad-Channel High Temperature Superconducting Diplexer Based on Stub-Loaded Square Ring Resonators
        Speaker: Ping Gui (East China Jiaotong University)
        3EP1-13_Guan Xuehui.pdf
      • 375
        3EP1-14 Design of Transmitting Filter using Cascaded Quadruplet Superconducting Bulk Resonator
        Speaker: Takafumi Saito (Yamagata University)
      • 376
        3EP1-15 HTS dual-band bandpass filter with independently tunable center frequencies
        Speaker: Naoto Sekiya (University of Yamanashi)
      • 377
        3EP1-17 Recently Developed Microwave Devices Based On High-TC Superconducting Films
        Speaker: Liang Sun (O.Usikov IRE NAS of Ukraine)
        3EP1-17_Cherpak Nickolay (Mykola).pdf
      • 378
        3EP1-18 Terahertz Radiation above 1 THz from intrinsic Josephson stack fabricated by acid modification process
        Speaker: Takahiro Kato (Nagaoka University of Technology)
      • 379
        3EP1-19 Design of compact and high pole HTS tri-band bandpass filters using a new feeding structure
        Speaker: Takahiro Unno (Japan)
      • 380
        3EP1-20 Design and Fabrication of HTS Pick-up Coil for Field-Swept Solid-State NMR
        Speaker: Atsushi Saito (Yamagata University)
      • 381
        3EP1-21 Voltage Oscillations with Magnetic Flux in Thermally Hysteretic Nano-SQUIDs Based on Superconducting Weak Link
        Speaker: Sourav Biswas (Indian Institute of Technology (IIT) Kanpur)
      • 382
        3EP1-22 Low-Loss Capacitively-Coupled Frequency Tuning and Impedance Matching Circuitry for HTS Based rf MRI Coils and Arrays
        Speaker: Jarek Wosik (Texas Center for Superconductivity at University of Houston and Electrical and Computer Engineering Department, University of Houston, Houston, TX 77204, USA)
        3EP1-22_Wosik Jarek.pdf
      • 383
        3EP1-23 Non-resonant microwave absorption in nano nickel added YBCO superconducting powders
        Speaker: Fhulufhelo Nemangwele (University of Venda)
    • Poster : 3EP2 - Nano wire detectors and content information processing CICG

      CICG

      Geneva
      • 384
        3EP2-01 Superconducting Single Photon Detector with the Capability of Photon-number Resolving and Photon Positioning
        Speaker: Xu Tao (Nanjing University)
        3EP2-01_Tao Xu.pdf
      • 385
        3EP2-02 High Sensitivity Superconducting Nanowire Single Photon Detector Integrated with Distributed Bragg Reflector
        Speaker: Yajun Chen (Nanjing University)
      • 386
        3EP2-03 Local and geometric timing jitter in superconducting nanowire single-photon detectors
        Speaker: Alexej Semenov (DLR Institute of optical systems)
      • 387
        3EP2-05 Comparison of superconducting nanowire single photon detectors made of NbTiN and NbN thin films
        Speaker: Xiaoyan Yang (Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS))
      • 388
        3EP2-06 Internal boundary conditions for elastic fluxon scattering at circuit interfaces
        Speaker: Waltraut Wustmann (Laboratory for Physical Sciences, USA)
      • 389
        3EP2-08 Current dependence of the hot-spot response spectrum of superconducting single-photon detectors with different layouts
        Speaker: Ilya Charaev (Karlsruhe Institute of Technology (KIT))
      • 390
        3EP2-09 Uniformity Analysis of Nanowires with Elemental Imaging
        Speaker: Xiaoqing Jia (Research Institute of Superconductor Electronics (RISE), School of Electronic Science and Engineering, Nanjing University)
        3EP2-09_Zhou Xiaoying.pdf
      • 391
        3EP2-10 Quasi-gated source for superconducting nanowire single-photon detector
        Speaker: Xiaoqing Jia (Research Institute of Superconductor Electronics of Nanjing University)
        3EP2-10_Zhang Labao.pdf
      • 392
        3EP2-11 Free-Space-Coupled Superconducting Nanowire Single Photon Detector Integrated with Distributed Bragg Reflector
        Speaker: Yajun Chen (Nanjing University)
        3EP2-11_Chen Yajun.pdf
      • 393
        3EP2-12 Superconducting components for quantum-information processing
        Speaker: Elena Zhitlukhina (Donetsk Institute for Physics and Engineering, NANU)
      • 394
        3EP2-13 Superconducting nanowire avalanche photodetector made of amorphous molybdenum silicide material
        Speaker: Misael Caloz (University of Geneva, GAP)
      • 395
        3EP2-14 Kinetic Inductance of Ultra-thin Magnesium Diboride Nanowires
        Speaker: Thomas Melbourne (Temple University)
      • 396
        3EP2-15 Ultrafast photon-number-resolving detectors for NIR operating at 4.2 K
        Speaker: Ekkehart Schmidt (Institute of Micro- und Nanoelectronic Systems (IMS), Karlsruhe Institute of Technology)
      • 397
        3EP2-16 One-dimensional p-wave superconductor toy-model for Majorana fermions in multiband semiconductor nanowires
        Speaker: Durval Rodrigues Jr. (University of São Paulo - Lorena Engineering School)
        3EP2-16_Rodrigues Jr. Durval.pdf
      • 398
        3EP2-17 Read-out Circuit Based on SFQ Logic Circuit for Photon-Number-Resolving SNSPD Array
        Speaker: Hiroaki Myoren (Saitama University)
      • 399
        3EP2-18 Fast and high efficiency superconducting nanowire single photon detector at 630 nm
        Speaker: Heqing Wang (Shanghai Institute of Microsystem and Information Technology (SIMIT))
    • Poster : 3LP1 - Fusion Magnets and Cables CICG

      CICG

      Geneva
      • 400
        3LP1-01 High current densities in round HTS CrossConductors of more than 500 A/mm² at 4.2 K, 12 T
        Speaker: Michael J. Wolf (KIT)
      • 401
        3LP1-02 Experimental study on Bi-2212 CIC conductor
        Speaker: Huajun Liu (Institute of Plasma Physics, Chinese Academy of Sciences)
        3LP1-02_Liu Huajun.pdf
      • 402
        3LP1-03 Re-examination of refrigeration power of the LHD cryogenic system after 18 years of operation
        Speaker: Toshiyuki Mito (National Institute for Fusion Science)
        3LP1-03_Mito Toshiyuki.pdf
      • 403
        3LP1-05 Thermal-hydraulic characterization of the ITER Toroidal Field Insert coil
        Speaker: Alberto Brighenti (Politecnico di Torino)
        3LP1-05_Brighenti Alberto.pdf
      • 404
        3LP1-06 Multi-Tape Stack High Current Cable for No-Insulation HTS Fusion Magnet
        Speaker: Seungyong Hahn (Seoul National University)
      • 405
        3LP1-08 Secondary Phases Quantification And Fracture Toughness At Cryogenic Temperature Of Austenitic Stainless Steel Welds For High Field Superconducting Magnets
        Speaker: Ignacio Aviles (CERN / Universidad Carlos III de Madrid)
      • 406
        3LP1-10 NDT Status Of PF-1 Coil Welds
        Speaker: Igor Sokolov (NIIEFA)
        3LP1-10_Sokolov Igor_Update.pdf
      • 407
        3LP1-11 Mechanical analysis of the ENEA TF coil proposal for the EU DEMO fusion reactor
        Speaker: Francesco Giorgetti (University of Rome Tor Vergata)
        3LP1-11_Biancolini Marco Evangelos.pdf
      • 408
        3LP1-12 Performance analysis of the first PF coils design for the EU DEMO fusion reactor
        Speaker: Andrea Zappatore (Politecnico di Torino)
        3LP1-12_Zappatore Andrea.pdf
      • 409
        3LP1-13 Winding & Forming Technology Development for CFETR Central Solenoid Model Coil
        Speaker: Houxiang Han (Institute of Plasma Physics Chinese Academy of Sciences)
        3LP1-13_Han Houxiang.pdf
      • 410
        3LP1-14 Experimental study of steady-state transverse heat transfer in a single channel CICC
        Speaker: Monika Lewandowska (West Pomeranian University of Technology, Szczecin)
        3LP1-14_Lewandowska Monika.pdf
      • 411
        3LP1-15 R&D of the Helium Inlet for the CFETR Central Solenoid Model Coil
        Speaker: Aihua Xu (Institute of Plasma Physics Chinese Academy of Sciences)
        3LP1-15_Xu Aihua.pdf
      • 412
        3LP1-16 Thermal-Hydraulic Analysis of the DEMO CS coil
        Speaker: Aleksandra Dembkowska (West Pomeranian University of Technology, Szczecin)
        3LP1-16_Dembkowska Aleksandra.pdf
      • 413
        3LP1-17 Thermal-hydraulic test of the ENEA TF conductor sample for the EU DEMO fusion reactor
        Speaker: Roberto Bonifetto (Politecnico di Torino)
        3LP1-17_Bonifetto Roberto.pdf
    • Poster : 3LP2 - No insulation / Smart insulation Coils CICG

      CICG

      Geneva
      • 414
        3LP2-01 Investigation on two techniques for the reduction of screening current-induced field effects in ReBCO HTS coils
        Speaker: Guillaume Dilasser (CEA Saclay)
        3LP2-01_Dilasser Guillaume.pdf
      • 415
        3LP2-03 Thermal Quench Behaviors of 2G HTS Tape Samples with Polyimide Insulation and Smart Insulation Materials
        Speaker: Chang Ju Hyeon (Jeju national university)
      • 416
        3LP2-04 Analysis of Dynamic Stress/Strain Distributions in a 10 T non-insulated GdBCO HTS Coil During Energization
        Speaker: Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 417
        3LP2-05 An adjustment method for turn-to-turn electrical contact resistance in No-Insulation REBCO coil: Multi-Layer Metal-Insulation method
        Speaker: Satoka Yashiro (Waseda University)
      • 418
        3LP2-06 Simulation of electrical and thermal behavior of no-insulation REBCO pancake coil with multiple defects
        Speaker: Qiyi Zheng (Waseda University)
      • 419
        3LP2-07 Non-uniform ramping loss distribution of multiple no-insulation REBCO coil system
        Speaker: Yawei Wang (University of Bath)
      • 420
        3LP2-08 Investigation of Characteristics of No-Insulation Coil Considering the Influence of Stress Distribution on the Turn-to-Turn Contact Resistivity
        Speaker: Guofeng Zhang (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)
        3LP2-08_Zhang Yi.pdf
      • 421
        3LP2-09 Development of superconducting joints between Bi-2212/Ag wires
        Speaker: Susannah Speller (University of Oxford, United Kingdom)
      • 422
        3LP2-11 Non-uniform ramping loss distribution of multiple no-insulation REBCO coil system
        Speaker: Yawei Wang (University of Bath)
    • Poster : 3LP3 - HTS Magnets & Cables Modeling CICG

      CICG

      Geneva
      • 423
        3LP3-01 Innovative Electro-Thermal Modeling of Quench in REBCO Roebel Cables and Coils.
        Speaker: Lorenzo Cavallucci (Department of Electrical, Electronic and Information Engineering, University of Bologna, Italy)
        3LP3-01_Cavallucci Lorenzo.pdf
      • 424
        3LP3-02 Study of a superconducting magnetic diverter for the ATHENA X-RAY Space Telescope
        Speaker: Nicolò Riva (EPFL)
      • 425
        3LP3-03 An Electromagnetic Analysis of REBCO Cable Configurations
        Speaker: Luca Bottura (CERN)
      • 426
        3LP3-04 Simulation and analysis of an (RE)BCO tape stack magnet under the pulsed field magnetization
        Speaker: Wenjiang Yang (Beihang University)
      • 427
        3LP3-05 A 3D T-A model for the stacks of second generation high temperature superconductor
        Speaker: Jie Sheng (University of Bath)
      • 428
        3LP3-06 Influence of physical properties of a Coil Bobbin on Transient Thermal Stress in a REBCO Pancake-coil
        Speaker: Daisuke Miyagi (Tohoku University)
      • 429
        3LP3-08 Parametric Evaluation of Pressure Drop and Heat Transfer with Nano Cryogenic Fluid in HTS cables
        Speaker: Priyanka Anand (Lovely Professional University)
      • 430
        3LP3-10 Electromagnetic Parameter Analysis of YBCO Superconducting Cables With High Current for HTS Power Devices
        Speaker: Shanshan Fu (China Electric Power Research Institute)
      • 431
        3LP3-11 Influence of the magnetization features of the HTS tape on the magnetic field homogeneity inside the superconducting unclosed shield
        Speaker: Evgeny Kulikov (Joint Institute for Nuclear Research)
        3LP3-11_Kulikov Evgeny.pdf
      • 432
        3LP3-14 Design of MgB2 superconducting joint using pressure-dependent finite element model
        Speaker: Seong-Hoon Kang (Korea Institute of Materials Science)
      • 433
        3LP3-15 Conceptual Design of the Suspension Structures for High-temperature Superconducting Magnets Deployed in Mobile Platforms
        Speaker: Timing Qu (Department of Mechanical Engineering, Tsinghua University)
      • 434
        3LP3-16 Shielding-current-induced fields in coils with various shapes wound with striated coated conductors
        Speaker: Yudai Mizobata (Kyoto University)
      • 435
        3LP3-17 Screening currents within the Eucard HTS insert
        Speaker: Philippe Fazilleau (cea)
        3LP3-17_Fazilleau Philippe.pdf
      • 436
        3LP3-18 A 3-D Numerical Model of Critical Current in Twist Stacked Tape Cable
        Speaker: Donghui Liu (Lanzhou University)
      • 437
        3LP3-19 HTS coil model for critical current calculation, quench behavior and comparison with wound sample experiment
        Speaker: Tara Benkel (CNRS - LNCMI)
        3LP3-19_Benkel Tara.pdf
      • 438
        3LP3-20 A 3D T-A model for the stacks of second generation high temperature superconductor
        Speaker: Jie Sheng (University of Bath)
    • Poster : 3LP4 - Magnet Design and Quench CICG

      CICG

      Geneva
      • 439
        3LP4-02 Magnetic Design for the Superferric Multipole Magnets of the Super-FRS
        Speaker: Hans Mueller (GSI Helmholtzzentrum für Schwerionenforschung GmbH)
        3LP4-02_Cho Eun Jung.pdf
      • 440
        3LP4-03 Force acting on a magnetic cloak placed in magnetic field
        Speaker: Mykola Soloviov (IEE SAS)
        3LP4-03_Soloviov Mykola.pdf
      • 441
        3LP4-04 Analytical Modeling of an Inductor ina Magnetic Circuit for Pulsed Field Magnetization of HTS Bulk
        Speaker: Mohamed Elbaa (GREEN - University of Lorraine & LESI - University of Khemis Miliana)
      • 442
        3LP4-05 Capacity Allocation and Electromagnetic Optimization of SMES in Micro Grid
        Speaker: Xiao Zhou (State Key Laboratory of Advanced Electromagnetic Engineering and Technology (R&D Center of Applied Superconductivity), Huazhong University of Science and Technology)
        3LP4-05_Zhou Xiao.pdf
      • 443
        3LP4-06 A Compact Electromagnet with High-Tc Superconducting REBaCuO Tapes
        Speaker: Chuanbing Cai (Shanghai Key Laboratory of High Temperature Superconductors, Shanghai University)
      • 444
        3LP4-07 Improvement of Magnetic Field Homogeneity from the HTS Joint-less Coil
        Speaker: Seyeon Lee (Korea Polytechnic University)
        3LP4-07_Lee Seyeon.pdf
      • 445
        3LP4-09 A 30kA IGBT based energy extraction system for the High Luminosity LHC magnet test facilities
        Speaker: Gert Jan Coelingh (CERN)
      • 446
        3LP4-10 Over-Current Characteristics of Roebel Cable Sample With 2G YBCO Coated Conductor
        Speaker: Panpan Chen (China Electric Power Research Institute)
      • 447
        3LP4-11 Study on hot spot temperature limits for epoxy-impregnated coil wound of Bi/Ag sheathed wire to be safe from damages caused by quenches
        Speaker: Ryuta Matsuo (Sophia University)
      • 448
        3LP4-12 Experimental study on method to suppress hot spot temperature of HTS coil by quick transfer of current of quenching coil
        Speaker: Ryuta Matsuo (Sophia University)
      • 449
        3LP4-13 Evaluation of　Strain Tolerance to the Superconducting Magnet Quenching by the 3-point Bending Test Stand
        Speaker: Manabu Aoki (Hitachi.Ltd. Research & Developing Group)
      • 450
        3LP4-14 Quench protection of the central solenoid model coil for the CFETR
        Speaker: Yuanyuan Ma (Institute of Plasma Physics Chinese Academy of Sciences)
        3LP4-14_Ma Yuanyuan.pdf
      • 451
        3LP4-15 Safety valve system for JT-60SA superconducting coils
        Speaker: Kyohei Natsume (National Institute for Quantum and Radiological Science and Technology)
      • 452
        3LP4-16 Analysis of Voltage Noises for the Reliability Improvement of the KSTAR CS Quench Detection
        Speaker: Geonwoo Baek (Yonsei University)
      • 453
        3LP4-17 Development of a digital quench detection system for Nb3Sn magnets and first measurements on prototype magnets
        Speaker: Jens Steckert (CERN)
      • 454
        3LP4-19 Experiments to Validate New Method to Diagnose Soundness of The High Temperature Superconducting Coils by Pick-up Coil Pairs
        Speaker: Akifumi Kawagoe (Kagoshima University)
      • 455
        3LP4-20 50 kV Fail-Safe Quench Detection System for Large Superconductor Magnets
        Speaker: Walter H. Fietz (Karlsruhe Institute of Technology (KIT))
        3LP4-20_Fietz Walter.pdf
      • 456
        3LP4-21 Partial isolation quench protection method for YBCO SMES magnet
        Speaker: Qixing Sun (university of bath)
      • 457
        3LP4-22 Protection Strategy for HTS Coils in DC Electric Power Network
        Speaker: Miyeon Yoon (Korea Polytechnic University)
      • 458
        3LP4-23 Quench detection utilizing stray capacitances
        Speaker: Emmanuele Ravaioli (LBNL)
      • 459
        3LP4-24 Coil Development and Coupling-Loss Induced Quench Protection of Bi-2212 Magnets
        Speaker: Daniel S. Davis (FSU-NHMFL)
        3LP4-24_Davis Daniel S..pdf
    • Poster : 3LP5 - Levitation, transportation and propulsion CICG

      CICG

      Geneva
      • 460
        3LP5-01 Comparison of levitation forces between a permanent and a switchable magnetic track of the SupraTrans2 levitation system
        Speaker: Tilo Espenhahn (IFW Dresden)
      • 461
        3LP5-02 Mechanical vibration test of a REBCO coil designed for application to the maglev
        Speaker: Katsutoshi Mizuno (Railway Technical Research Institute)
      • 462
        3LP5-04 Research on HTS magnetic levitation bearing for submerged cryogenic disk motor-pump
        Speaker: Liwang Ai (Institute of Electrical Engineering,Chinese Academy of Sciences;University of Chinese Academy of Sciences)
      • 463
        3LP5-05 Ripple field effects on the no-insulation rotor windings of high temperature superconductor machines used in all electrical aircraft.
        Speaker: Yawei Wang (University of Bath)
      • 464
        3LP5-06 Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft
        Speaker: Yawei Wang (University of Bath)
      • 465
        3LP5-07 Study of magnetic stiffness and effect on running stability in high speed train propelled by superconducting linear synchronous motor
        Speaker: Jinho Lee (Korea Railroad Research Institute)
      • 466
        3LP5-08 The Critic Liquid-gas Phase Transition between Liquid Nitrogen and YBCO HTS bulks: from FEM Modeling to Its Experimental Study for ZFC Levitation Devices
        Speaker: Paulo Branco (IDMEC - Prof. Paulo Branco)
        3LP5-08_Branco Paulo.pdf
      • 467
        3LP5-10 Numerical modelling of Superconducting network in an All-Electric Aircraft
        Speaker: Sriharsha Venuturumilli (University of Bath)
      • 468
        3LP5-11 Wireless Power Charging Characteristics between Copper Antenna and HTS Receiver Module under Strong Levitation Field in Superconducting MAGLEV Train
        Speaker: Je Yull Lee (Suwon Science College)
      • 469
        3LP5-12 Analysis of the motion of a body in the linear HTS suspension along a curvilinear trajectory
        Speaker: Pavel Kurbatov (National Research University "Moscow Power Engineering Institute")
        3LP5-12_Kurbatova Ekaterina.pdf
      • 470
        3LP5-17 An Electromagnetic Turnout of Halbach-type PMG for Superconducting Maglev
        Speaker: Yanxing Li (Southwest Jiaotong University)
        3LP5-17_Li Yanxing.pdf
      • 471
        3LP5-18 Analysis of conducted emissions in high power superconducting electrical propulsion system
        Speaker: Xiaojian Li (china north vehicle research institute)
      • 472
        3LP5-19 A Design Method of HTS Bulks Array for Decreasing Rotation Loss in a Superconducting Maglev Micro-thrust Stand
        Speaker: Ye Mao (Beihang University)
    • Poster : 3LP6 - SMES and Combined devices CICG

      CICG

      Geneva
      • 473
        3LP6-01 Influences of Flux Diverter on Critical Current and Energy Storage Capacity of Mini-Size SMES Magnet Wound by 100-Meter-Class GdBCO Tape
        Speaker: Jian-Xun Jin (Tianjin University)
        3LP6-01_Liu Xiao-Dong.pdf
      • 474
        3LP6-03 Development and experimental investigation of a pancake coil consisted of high temperature composite superconductor with spiral cooling channel
        Speaker: Jiahui Zhu (China Electric Power Research Institute)
      • 475
        3LP6-04 Test in strong background field of the first modular element of a REBCO 1MJ high energy density SMES
        Speaker: Jeremie Ciceron (CNRS - Institut Néel)
        3LP6-04_Ciceron Jeremie.pdf
      • 476
        3LP6-05 Research on the Application of Superconducting Magnetic Energy Storage in Microgrid System for Smoothing Power Fluctuation Caused by Operation Modes Switching
        Speaker: Ying Xu (Huazhong University of Science and Technology)
        3LP6-05_Xu Ying.pdf
      • 477
        3LP6-06 Design of a 30-K/4-kJ Solid Nitrogen Cooled HTS Magnet
        Speaker: Timing Qu (Tsinghua University)
        4LP1-10_Qu Timing.pdf
      • 478
        3LP6-07 Thermal Analysis of Superconducting Magnetic Energy Storage Sytems Using Finite Elements Mehod
        Speaker: Serhat Tunc (Istanbul University Department of Physics)
      • 479
        3LP6-09 Conceptual Design and Evaluation of a MW-Class SMES-BES DVR System
        Speaker: Zixuan Zheng (Sichuan University)
      • 480
        3LP6-11 A method for quench detection in inductive superconducting fault current limiters of transformer type
        Speaker: Joao Murta-Pina (Centre of Technology and Systems (Uninova))
      • 481
        3LP6-12 AC-Loss Measurements and Detailed Loss Analysis on a 1MVA-Class Superconducting Fault Current Limiting Transformer
        Speaker: Sebastian Hellmann (Karlsruhe Institute of Technology)
        3LP6-12_Hellmann Sebastian.pdf
      • 482
        3LP6-13 Field test of a 1MVA/1MJ Superconducting Fault Current Limiter-Magnetic Energy Storage System
        Speaker: Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 483
        3LP6-14 2.5 kVA Single- Phase Self-Limiting Transformer Using Magnetic Flux Transfer
        Speaker: Ercan Ertekin (Ankara University)
      • 484
        3LP6-15 Current Limiting Characteristics using Double Quench of Transformer Type SFCL with Additional Secondary Winding
        Speaker: Sung-Hun Lim (Soongsil University)
      • 485
        3LP6-16 Design and Evaluation of SMES-Battery Energy Storage System for Smoothing Mode Transfer of a Micro-Grid between Grid-Connected and Islanded Conditions
        Speaker: Lei Chen (Wuhan University)
        3LP6-16_Chen Lei.pdf
    • Poster : 3LP7 - Power transmission and cables CICG

      CICG

      Geneva
      • 486
        3LP7-01 Design Optimization of a Superconducting Gas-Insulated Transmission Line
        Speaker: Sastry Pamidi (Center for Advanced Power Systems)
        3LP7-01_Cheetham Peter.pdf
      • 487
        3LP7-02 Influence of cabling on current carrying properties of MgB2 superconductors
        Speaker: Sergey Fetisov (Russian Scientific R&D Cable Institute)
        3LP7-02_Vysotsky Vitaly.pdf
      • 488
        3LP7-03 Technology Collaboration Program on High Temperature Superconductivity (HTS): how HTS applications may influence international standardization activity
        Speaker: Giuliano Angeli (Ricerca sul Sistema Energetico - RSE S.p.A.)
        3LP7-03_Angeli Giuliano.pdf
      • 489
        3LP7-04 Advances in the First Brazilian Project on HTS Power Cable
        Speaker: Marcelo Neves (LMDS / UFRRJ (Federal Rural University of Rio de Janeiro))
      • 490
        3LP7-05 Computational simulation of thermal behavior of a Cold Dielectric HTS Power Cable
        Speaker: Edson da Silva (LMDS/Physics Department/UFRRJ)
      • 491
        3LP7-06 Efficient numerical modelling of superconducting power cables – A comparative study between 2D and 3D numerical models
        Speaker: Min Yao (Institute of Energy System, School of Engineering, the University of Edinburgh)
      • 492
        3LP7-07 Simulation and test of the compact 2G HTS power cable model
        Speaker: Sergey Fetisov (Russian Scientific R&D Cable Institute)
        3LP7-07_Vysotsky Vitaly.pdf
      • 493
        3LP7-08 Fault Current Investigations of a concentric three-phase HTS Cable connected to a SFCL Device
        Speaker: Wescley Tiago Batista de Sousa (Karlsruher Institut für Technologie / Institut für Technische Physik)
        3LP7-08_Batista de Sousa Wescley Tiago.pdf
      • 494
        3LP7-09 A 3D quench model for high temperature superconductor CORC cable based T-A formulation
        Speaker: Zixuan Zhu (University of Bath)
      • 495
        3LP7-10 Design Comparisons of concentric three-phase HTS Cables
        Speaker: Dustin Kottonau (Karlsruhe Institute of Technology / Institute for Technical Physics)
      • 496
        3LP7-11 Short circuit test results of 22kV HTS triaxial superconducting bus
        Speaker: Kazuhisa Adachi (SWCC showa cable systems co., ltd)
      • 497
        3LP7-12 Comparative Analysis of Finite Element Method and Volume Element Method for Thermal Modeling of Superconducting DC Transmission Systems
        Speaker: Dimitrios Doukas (Eidikos Logariasmos Kondilion Erevnas A.P.TH)
        3LP7-12_Doukas Dimitrios.pdf
      • 498
        3LP7-13 The Model Development and Power System Analysis of HVDC system in Jeju Island with DC 80kV HTS
        Speaker: Eunyoung Ko (Korea Electrotechnology Research Institute)
      • 499
        3LP7-15 Multi-Terminal DC Transmission Systems based on Superconducting Cables Feasibility Study, Modeling and Control
        Speaker: Dimitrios Doukas (Eidikos Logariasmos Kondilion Erevnas A.P.TH)
        3LP7-15_Doukas Dimitrios.pdf
      • 500
        3LP7-16 Comparisons between Simulations and Experimental Results of 66kV 40m model HTS Power Cable in Short-circuit Current Accidents
        Speaker: Daichi Horita (WASEDA University)
      • 501
        3LP7-18 System Apparatus And Methods For A 4k (Stochastic) Superduct
        Speaker: Charles Janeke (Constellation Dynamics LLC)
      • 502
        3LP7-19 UK’s 1st feasibility study of using superconducting cables in electricity distribution networks
        Speaker: Weijia Yuan (University of Bath)
      • 503
        3LP7-20 3-D Numerical Modelling of AC losses in MgB2 wires for the 10 kA demonstrator of BEST PATHS
        Speaker: Guillaume Escamez (NEXANS/SuperGRID)
      • 504
        3LP7-21 Safety verification of 275kV HTS Cable System in Short-current Accidents
        Speaker: Yusuke Yokoo (Waseda University)
      • 505
        3LP7-24 A new proposal of Terminations for HTS Power Cables
        Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))
      • 506
        3LP7-26 Electro-mechanical performance of 18-strand MgB2 cables for the Superconducting Link Project at CERN
        Speaker: Konstantina Konstantopoulou (CERN)
        3LP7-26_Konstantopoulou Konstantina.pdf
      • 507
        3LP7-27 Development of MgB2 cable conductors for very high power HVDC transmission within the Best Paths project
        Speaker: Christian-eric Bruzek (Nexans France)
      • 508
        3LP7-28 Effective pumping of long HTS power transmission line insulated with heat radiation shield
        Speaker: Yury Ivanov (Chubu University)
      • 509
        3LP7-29 Suitable cable structure of HTS tri-axial cable cooled by counter flow cooling method for long-distance power transmission
        Speaker: Daisuke Miyagi (Tohoku University)
      • 510
        3LP7-30 An Improved Starting Strategy for a Spherical Superconducting Rotor
        Speaker: Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 511
        3LP7-31 World first commercial project for applying superconducting cable system in Korea
        Speaker: Cheolhwi Ryu (LS Cable&System Ltd.)
    • Poster : 3MP1 - Flux Pinning Cuprates CICG

      CICG

      Geneva
      • 512
        3MP1-02 Flux pinning in REBCO-based coated conductors probed by correlation of Jc and N-value
        Speaker: Mayraluna Lao (Karlsruhe Institute of Technology)
      • 513
        3MP1-03 Influence of antidots on transport characteristics of HTSC
        Speaker: Anna Moroz (National Research Nuclear University MEPhI)
        3MP1-03_Moroz Anna.pdf
      • 514
        3MP1-04 Pinning, dissipation and anisotropy in nanostructured YBa2Cu3O7-x from microwave measurements.
        Speaker: Enrico Silva (Universita` Roma Tre)
      • 515
        3MP1-05 Tunable pinning effects produced by non-uniform antidot arrays in YBCO thin films
        Speaker: Antony Jones (Commonwealth Scientific and Industrial Research Organisation)
        3MP1-05_Jones Antony.pdf
      • 516
        3MP1-06 Investigation of the longitudinal magnetic field effect in REBa2Cu3Oy films with various particulate artificial pinning centers
        Speaker: Kazuki Sugihara (Nagoya University)
      • 517
        3MP1-07 Analysis of properties of 2G HTS tapes operating under DC magnetic field generated by permanent magnets
        Speaker: Krzysztof Habelok (Silesian University of Technology)
      • 518
        3MP1-08 Vortex Dynamics in SmBa2Cu3Oy Films with BaHfO3 Nanorods as Correlated Artificial Pinning Centers
        Speaker: Yuji Tsuchiya (Nagoya Univ.)
      • 519
        3MP1-09 Physical Properties of Nanostructured, Liquid Assisted Grown, Epitaxial YBa2Cu3O7-x Superconducting Films
        Speaker: Juri Banchewski (Institut de Ciència de Materials de Barcelona (ICMAB-CSIC))
      • 520
        3MP1-10 The post-annealing effect of GdBa2Cu3O7-δ coated conductors on the pinning properties via a RCE-DR process
        Speaker: Insung Park (Seoul National University)
      • 521
        3MP1-11 "Is Surface Decoration The New Black?" A Comparison Between Surface Decoration And Artificial Pinning Centers
        Speaker: Achille Angrisani Armenio (ENEA)
      • 522
        3MP1-13 The effect of Nd2O3 addition on the magnetic properties of bulk single grain YBCO synthesized by Top Seeded Infiltration and Growth
        Speaker: Talal A. Aljohani (Excellence Centre for Advanced Materials and Manufacturing, King Abdulaziz City for Science and Technology (KACST))
      • 523
        3MP1-14 Universal Scaling Of The Self-Field Critical Current From Single-Atomic Layer To Millimetre-Scale Superconductors
        Speaker: Evgeny Talantsev (Victoria University of Wellington)
      • 524
        3MP1-15 YBa2Cu3O7-x nanocomposite films by CSD-ultrafast Transient Liquid Assisted Growth
        Speaker: Júlia Jareño Cerulla (Institut de Ciències dels Materials de Barcelona (ICMAB-CSIC))
        3MP1-15_Jareño Cerulla Júlia.pdf
      • 525
        3MP1-18 The High-Field, Strain Dependence of the Critical Current in GdBa2Cu3O7-x SuNAM Coated Conductors for Fusion Applications
        Speaker: Jack Greenwood (University of Durham, Department of Physics)
        3MP1-18_Greenwood Jack.pdf
      • 526
        3MP1-19 Influence of growth temperature and oxygen pressure on transport properties of BHO-doped REBCO(RE=Gd, Y) superconducting thin films
        Speaker: Ruslan Popov (KIT)
      • 527
        3MP1-20 Critical Current And Vortex Flux Pinning Properties in YBa2Cu3O7-x Films with Ba2YTaO6 + Ba2YNbO6 Nano-inclusions By DC Transport And Microwave Measurements
        Speaker: Anna Frolova (Roma Tre University)
      • 528
        3MP1-21 Influence of micron range artificial defects on critical current of 2G HTS tapes
        Speaker: Sergei Pokrovskii (NRNU MEPHI)
      • 529
        3MP1-22 Critical current anisotropy in commercial coated conductors at higher temperatures
        Speaker: Eugen Seiler (Institute of Electrical Engineering)
    • Poster : 3MP2 - Non-Cuprate Thin Films CICG

      CICG

      Geneva
      • 530
        3MP2-02 EBSD analysis of surface texture quality of oxide thin films in coated conductors
        Speaker: Yue Zhao (Shanghai Jiao Tong University)
      • 531
        3MP2-03 Epitaxial (001) SrTiO3 films on Cu-based substrates by PLD under reducing atmosphere for YBCO Coated Conductor
        Speaker: Elena Xuriguera (Universitat de Barcelona)
      • 532
        3MP2-05 Surface Flashover Characteristics of PPLP According to Its Orientation in Cryogenic Environment
        Speaker: Jin-Yong Na (Hanyang university)
      • 533
        3MP2-06 Comparison of AC and DC Breakdown Characteristics of PPLP in LN2 Considering Corona Inception Voltage
        Speaker: Ryul Hwang (Hanyang university)
      • 534
        3MP2-07 Synthesis of superconductive TaN films using DC reactive sputtering deposition
        Speaker: Amanda Nieto (CENTRO DE INVESTIGACION CIENTIFICA Y DE EDUCACION SUPERIOR DE ENSENADA, BAJA CALIFORNIA)
      • 535
        3MP2-08 Influence of surface faceting of RABiT-type metallic substrate on epitaxial film growth
        Speaker: Giuseppe Celentano (ENEA)
      • 536
        3MP2-09 Growth of biaxially-textured La2Zr2O7 and Zr-doped CeO2 on cold-rolled Ni-W substrate by CSD
        Speaker: Angelo Vannozzi (ENEA)
      • 537
        3MP2-10 Influence of the inhomogeneous properties of a superconducting film on the penetration of the magnetic flux
        Speaker: Loïc Burger (Department of Electricity, Electronics, and Computer Science of the University of Liège)
      • 538
        3MP2-11 Effect of homoepitaxial MgO films on the growth of CeO2 films by pulsed laser deposition
        Speaker: Wei Wang (School of Physics and Astronomy, Shanghai Jiao Tong University)
        3MP2-11_Wang Wei.pdf
      • 539
        3MP2-12 Preparation and characterization of Bi2Se3 films grown on FeSe2 by pulsed laser deposition
        Speaker: Ming Lei (Southwest Jiaotong University)
        3MP2-12_Lei Ming.pdf
      • 540
        3MP2-14 Topological quantum phase transition and superconductivity induced by pressure in the bismuth tellurohalide BiTeI
        Speaker: Yanpeng Qi (Max Planck Institute for Chemical Physics of Solids)
      • 541
        3MP2-16 Novel Platinum-Based Superconductor LaPt5As with Unique Crystal Structure
        Speaker: Masaya Fujioka (University of Hokkaido)
      • 542
        3MP2-17 Research on Electrical Performance of Impregnating Resin Material for Superconducting Magnet
        Speaker: Yanfang Yang (China Electric Power Research Institute)
      • 543
        3MP2-18 Thermal conductivity AlN/epoxy composites for superconducting magnets
        Speaker: Teng Zhang (Beijing Jiaotong University)
      • 544
        3MP2-19 Electromagnetic characterization of a new dielectric for High-Tc Power Cable
        Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))
      • 545
        3MP2-20 Application of metamaterial nano-engineering for increasing the superconducting critical temperature
        Speaker: Michael Osofsky (Materials Science and Technology Division, Naval Research Laboratory)
        3MP2-20_Osofsky Michael.pdf
      • 546
        3MP2-21 Electron-beam evaporated superconducting titanium thin films for antenna coupled transition edge sensors
        Speaker: Zheng Wang (Purple Mountain Observatory, Chinese Academy of Sciences)
    • Poster : 3MP3 - Cuprate Bulk CICG

      CICG

      Geneva
      • 547
        3MP3-01 Influence of doping on electrical and thermal properties of Dy0.95Pr0.05Ba2Cu2.94M0.06O7-δ (M = Fe, Ni, Zn and Mn)
        Speaker: Ashok Rao (Manipal Institute of Technology, Manipal University)
      • 548
        3MP3-02 Batch processing of single-domain YBCO bulks with artificial holes
        Speaker: Tomáš Hlásek (CAN SUPERCONDUCTORS s.r.o.)
      • 549
        3MP3-03 GdBCO single grain bulk superconductor via 2-step top seeded infiltration and growth process
        Speaker: Devendra Kumar Namburi (UNIVERSITY OF CAMBRIDGE)
      • 550
        3MP3-04 Effects of Cu substitution for Nb in NbSr2RECu2Oz (z~8; RE: rare-earth element)
        Speaker: Toshihiko Maeda (Kochi University of Technology)
      • 551
        3MP3-06 Effect of AuBr3 Doping on the Superconducting Properties of Hg-based Superconductors
        Speaker: Ioseb Metskhvarishvili (Ilia Vekua Sukhumi Institute of Physics and Technology, Laboratory of Cryogenic Technique and Technologies)
      • 552
        3MP3-07 Production of polycrystalline superconducting ceramic nanowires, using the Solution Blow Spinning technique
        Speaker: Rafael Zadorosny (UNESP - Ilha Solteira)
        3MP3-07_Zadorosny Rafael.pdf
      • 553
        3MP3-08 Microstructure of IG-processed YBCO
        Speaker: Michael Koblischka (Saarland University)
      • 554
        3MP3-09 Raman Characterisation of Melt-Textured Gd1212 Superconductors in the Normal State.
        Speaker: Marcello Gombos (CNR-IMM UoS Napoli)
      • 555
        3MP3-10 Influence of CeO2, La2O3 and Sm2O3 additions on the Microstructure and Properties of YBCO Bulk Superconductors Prepared by TSIG Process
        Speaker: Liudmila Vojtkova (Institute of Experimental Physics, Slovak Academy of Sciences)
      • 556
        3MP3-11 Addressing the challenge of bar shaped bulk REBCO superconductors
        Speaker: Yunhua Shi (Engineering Department, University of Cambridge)
      • 557
        3MP3-12 The Influence of Gd Addition on the Microstructure and Superconducting Properties of YBCO Bulk Superconductors
        Speaker: Daniela Volochová (Institute of Experimental Physics SAS)
      • 558
        3MP3-13 Characterization of liquid phase on production of single grain bulk GdBa2Cu3Oy superconductors grown by IG process
        Speaker: Yuta Nakanishi (Shibaura Institute of Technology)
      • 559
        3MP3-14 Influence of Sm Doping on YBCO Bulks in Y123/Y211 System
        Speaker: Monika Radušovská (Institute of Experimental Physics SAS)
      • 560
        3MP3-15 YBCO bulk production via a novel preparation technique for applications
        Speaker: Ercan Ertekin (Ankara University)
      • 561
        3MP3-16 Change of superconducting properties of single grain Sm-Ba-Cu-O bulk by Sm/Ba substitution effect
        Speaker: Petra Hajdová (Institute of Experimental Physics SAS)
      • 562
        3MP3-17 Effect of Different Preperation Techniques and re-pelletization Procedure on the Structural, Mechanical and Superconducting Properties of BSCCO Superconductors
        Speaker: Hamit Öztürk (Ankara University 50. Year Campus)
      • 563
        3MP3-18 Effect of Nd(422) Dopant on the Superconducting Properties of Nd(123) Superconductor Melt-processed in Air
        Speaker: Ahmed Mahmoud (Department of physics,Faculty of Science,University of Tripoli)
      • 564
        3MP3-20 Laser induced circular texture in Bi-2212 bulk
        Speaker: Elena Martínez (ICMA (CSIC-University of Zaragoza))
        3MP3-20_Amaveda Hippolite.pdf
    • Poster : 3MP4 - Bi-Based wired and LTS Materials CICG

      CICG

      Geneva
      • 565
        3MP4-01 Strong HTS wires based on the Bi2212 superconductor
        Speaker: Alexander Otto (Solid Material Solutions, LLC)
      • 566
        3MP4-02 BOST progress on Bi-2212 round wire fabrication for high field magnet applications
        Speaker: Yibing Huang (Bruker-OST)
      • 567
        3MP4-03 Overpressure densification of 2212 round wires before solenoid coil winding for higher winding pack stability and higher JW
        Speaker: Maxime Matras (CERN)
        3MP4-03_Matras Maxime.pdf
      • 568
        3MP4-04 Investigation of inter-grain critical current density in Bi-2212 superconducting wires through Jc(B,T) measurements
        Speaker: Alessandro Leveratto (CNR-SPIN)
      • 569
        3MP4-05 Axial tensile stress-strain characterization of Bi-2212 round wire with different heat treatment pressures
        Speaker: Jinggang Qin (Institute of Plasma Physics, CAS and ASIPP)
      • 570
        3MP4-07 Experimental Investigation of Bi-2223/Ag Superconducting Tape Joints
        Speaker: Yuta Ebara (Sumitomo Heavy Industries, Ltd./ Engineering Physics Dept. / Technology Research Center)
      • 571
        3MP4-09 Investigations on the enhancement of the critical current density in Nb3Sn superconductors by internally oxidized ZrO2 particles
        Speaker: Florin Buta (Universisty of Geneva, DQMP)
      • 572
        3MP4-11 Growth Rate and Morphology of Nb3Sn Layers in ITER-type Bronze-Processed Wires under Different Diffusion Annealing Regimes
        Speaker: Evgeniya Valova-Zaharevskaya (M.N. Miheev Institute of Metal Physics of Ural Branch of Russian Academy of Sciences)
        3MP4-11_Valova-Zaharevskaya Evgeniya.pdf
      • 573
        3MP4-12 Effect of initial Nb billet conditions on the strain hardening of Nb filaments in Nb3Sn strand for FCC
        Speaker: Iksang Shin (KAT)
      • 574
        3MP4-14 Microstructure and superconducting properties of bronze-processed Nb3Sn layer using Cu-Sn-In ternary matrix
        Speaker: Yoshimitsu Hishinuma (National Institute for Fusion Science)
      • 575
        3MP4-15 A Study on the High Jc Nb3Sn Strand Manufacturing Process
        Speaker: Soobok Yoon (KAT)
      • 576
        3MP4-16 Effect of Sn concentration in bronze matrix on the pre-reaction formation of Nb3Sn layers in bronze-processed superconducting strands of different design
        Speaker: Irina Deryagina (M.N. Miheev Institute of Metal Physics, Ural Branch of RAS (IMP, UB RAS))
        3MP4-16_Deryagina Irina.pdf
      • 577
        3MP4-17 Lattice dynamics and compressibility on Nb3Sn at high pressure by a multitechnique approach
        Speaker: Rita Loria (Science Department, University Roma Tre, Rome, Italy)
      • 578
        3MP4-18 Role of Ti on critical current density-dependent metallurgical aspects of A15-based superconductors by bronze method
        Speaker: Sangeeta Santra (University of Oxford)
      • 579
        3MP4-19 Lead-free persistent mode joints between NbTi wires
        Speaker: Timothy Davies (Department of Materials, University of Oxford)
      • 580
        3MP4-20 Ternary Molybdenum Chalcogenide superconducting wires for ultra-high field applications
        Speaker: Bernd Seeber (University of Geneva, now scMetrology SARL)
        3MP4-20_Seeber Bernd.pdf
      • 581
        3MP4-21 Effect of overpressure heat treatment on the microstructure and the current-carrying capacity of Bi-2212 wires
        Speaker: Qingbin Hao (Northwest Institute for Nonferrous Metal Research)
    • Poster : 3MP5 - Magnetization and Trapped Field + AC Losses 2/2 CICG

      CICG

      Geneva
      • 582
        3MP5-01 Model for the response of superconducting/ferromagnetic structures subjected to crossed fields
        Speaker: Benoit Vanderheyden (University of Liege)
      • 583
        3MP5-02 Waveform control pulse magnetization for HTS bulk with flux jump
        Speaker: Tetsuya Ida (Tokyo University of Marine Science and Technology)
      • 584
        3MP5-03 Creep and relaxation phenomena in a long MgB2 tube subjected to transversal magnetic field, at 4.2 K
        Speaker: Giovanni Giunchi (Materials Science Consultant)
      • 585
        3MP5-04 Magnetic shielding properties of superconducting and superconducting/ferromagnetic superimposed systems
        Speaker: Laura Gozzellino (Politecnico di Torino, Department of Applied Science and Technology)
        3MP5-04_Gozzellino Laura.pdf
      • 586
        3MP5-05 Magnetic shielding at 1 T: achievements of machinable MgB2
        Speaker: Laura Gozzelino (University of Torino)
        3MP5-05_Truccato Marco.pdf
      • 587
        3MP5-07 Flux jump assisted pulsed field magnetisation in a portable magnet system
        Speaker: Difan Zhou (University of Cambridge)
        3MP5-07_Zhou Difan.pdf
      • 588
        3MP5-08 Three-dimensional modelling and experiments of cross-field demagnetization in cubic bulks
        Speaker: Milan Kapolka (Institute of Electrical Engineering, SAS)
        3MP5-08_Kapolka Milan.pdf
      • 589
        3MP5-09 Three-dimensional numerical modeling of a superconducting cube: benchmarking confirms non-rectangular current paths
        Speaker: Francesco Grilli (Slovak Academy of Sciences)
        3MP5-09_Kapolka Milan.pdf
      • 590
        3MP5-10 Pulse Magnetization of Jointless Superconducting Loops for Magnetic Bearings Height Control
        Speaker: Rubens de Andrade Junior (Federal University of Rio de Janeiro)
        3MP5-10_Santos da Cruz Vagner.pdf
      • 591
        3MP5-11 Dependence of the trapped magnetic flux density of YBCO pellets on mechanical stress
        Speaker: Bruno Douine (Universidad Nacional Autonoma de Mexico)
      • 592
        3MP5-12 Demagnetisation study of pulse-field magnetised superconducting bulks
        Speaker: Jan Srpcic (University of Cambridge)
        3MP5-12_Srpcic Jan.pdf
      • 593
        3MP5-13 Modifying the Pulsed-Field-Magnetization Technique for HTS Bulks in Electrical machines and Without Magnetic Field Sensors
        Speaker: João Arnoud (Instituto Superior Técnico (IST) - University of Lisbon)
        3MP5-13_Arnoud João.pdf
      • 594
        3MP5-14 Inverse B-J models for determining current distributions in magnetised bulk superconductors
        Speaker: Fernando Perez (Bulk Superconductivity Group, Department of Engineering, University of Cambridge)
      • 595
        3MP5-15 AC losses in MgB2 wires and tapes in frequencies up to 18 kHz
        Speaker: Yasha Nikulshin (Bar Ilan University)
      • 596
        3MP5-16 Measurement and Analysis of the Dynamic Effects in an HTS Dipole Magnet
        Speaker: Carlo Petrone (CERN)
    • 15:30
      Coffee Break CICG

      CICG

      Geneva
    • 3EO2 - Super conducting Photon Dectetors CICG Room 3+4

      CICG Room 3+4

      Geneva
      • 597
        3EO2-01 Superconducting Nanowire Single-Photon Detector as a Key Element for Quantum Photonic Integrated Circuits
        Speaker: Gregory Goltsman (Moscow State Pedagogical University)
        3EO2-01_Gregory Goltsman_Room 3+4.pdf
      • 598
        3EO2-02 Bistable 10 nm thick YBa2Cu3O7-δ nanowires as new materials for single photon detectors
        Speaker: Riccardo Arpaia (Chalmers University of Technology)
        3EO2-02_Riccardo Arpaia_Room 3+4.pdf
      • 599
        3EO2-03 Photoresponse of La1.85Sr0.15CuO4 nanostrip
        Speaker: Hiroyuki Shibata (Kitami Institute of Technology)
        3EO2-03_Hiroyuki Shibata_Room 3+4.pdf
      • 600
        3EO2-04 Optically probing the detection mechanism in a molybdenum silicide superconducting nanowire single-photon detector
        Speaker: Misael Caloz (Universite de Geneve (CH))
        3EO2-04_Misael Caloz_Room 3+4.pdf
      • 601
        3EO2-05 THz Heterodyne Detectors Based on MgB2 Thin Films
        Speaker: Boris Karasik (Jet Propulsion Laboratory)
        3EO2-05_Boris Karasik_Room 3+4.pdf
      • 602
        3EO2-06 Kinetic inductance bolometer arrays for security screening applicatoins
        Speaker: Juha Hassel (VTT Technical Research Centre of Finland)
        3EO2-06_Juha Hassel_Room 3+4.pdf
      • 603
        3EO2-07 SNSPD Array Based on MgF2 Substrate for Laser Ranging of Targets in Space
        Speaker: Labao Zhang (Research Institute of Superconductor Electronics of Nanjing University)
        3EO2-07_Labao Zhang_Room 3+4_no_indico.pdf
      • 604
        3EO2-08 Realization of the Resonant Cold-Electron Bolometer (RCEB) with a Kinetic Inductance Nanofilter for Multichroic Pixels
        Speaker: Leonid Kuzmin (Chalmers University of Technology)
        3EO2-08_Leonid Kuzmin_Room 3+4.pdf
    • 3LO4 - Power Transmission Lines and Cables CICG Room 1 (Geneve )

      CICG Room 1

      Geneve

      • 605
        3LO4-01 Recent status and progress on the HTS applications of AC and DC power transmission
        Speaker: Minwon Park (Changwon National University)
        3LO4-01_Minwon Park_Room 1.pdf
      • 606
        3LO4-02 The Supernet NL Project: The Netherlands High Voltage HTS Cable Project
        Speaker: Babak Gholizad (TenneT TSO)
        3LO4-02_Babak Gholizad_Room 1.pdf
      • 607
        3LO4-03 The second cooling test of 1000-meter superconducting DC cable system in Ishikari
        Speaker: Noriko Chikumoto (Chubu University)
        3LO4-03_Noriko Chikumoto_Room 1.pdf
      • 608
        3LO4-04 Protection against the ground fault for 275 kV HTS cable and the experiment
        Speaker: Tomohiro Takagi (Furukawa Electric co., ltd.)
        3LO4-04_Tomohiro Takagi_Room 1.pdf
      • 609
        3LO4-05 Three years operation experience of the AmpaCity system installation in Essen, Germany
        Speaker: Jean-Maxime Saugrain (Nexans Deutschland GmbH)
        3LO4-05_Jean-Maxime Saugrain_Room 1.pdf
      • 610
        3LO4-06 Status of the MgB2-based high-power DC cable demonstrator within BEST PATHS
        Speaker: Christian-eric Bruzek (Nexans France)
        3LO4-06_Christian-Eric Bruzek_Room 1.pdf
      • 611
        3LO4-07 3S – Superconducting DC-Busbar for High Current Applications
        Speaker: Steffen Elschner (University of Applied Science Mannheim)
        3LO4-07_Steffen Elschner_Room 1.pdf
      • 612
        3LO4-08
    • 3MO3 - Cuprate Thin films CICG Room 2 (Geneva )

      CICG Room 2

      Geneva

      • 613
        3MO3-01 Surface diffusion constants and supersaturations in SmBCO films prepared by pulsed laser deposition method at various deposition conditions
        Speaker: Yusuke Ichino (Nagoya University)
        3MO3-01_Yusuke Ichino_Room 2.pdf
      • 614
        3MO3-02 Transport properties and granular properties relation in YBCO and composite YBCO films determined by means of synchrotron X-ray diffraction
        Speaker: Andrea Augieri (ENEA-FSN)
        3MO3-02_Andrea Augieri_Room 2.pdf
      • 615
        3MO3-03 Mechanisms of novel transient liquid assisted growth for ultrafast production of YBa2Cu3O7-x thin films
        Speaker: Laia Soler Bru (Institut de Ciència de Materials de Barcelona (CSIC))
        3MO3-03_Laia Soler Bru_Room 2.pdf
      • 616
        3MO3-04 Preparation of superconducting GdBa2Cu3O7-x-BaHfO3 nanocomposite films by CSD with improved electrical performances
        Speaker: PABLO CAYADO (Karlsruhe Institute of Technology (KIT))
        3MO3-04_Pablo Cayado_Room 2.pdf
      • 617
        3MO3-05 Influence of granularity on the local transport properties in pure and BaHfO3 doped YBCO films on technical templates
        Speaker: Ruben Hühne (IFW Dresden)
        3MO3-05_Ruben Hühne_Room 2.pdf
      • 618
        3MO3-06 Ionic liquid gating of YBa_2Cu_3O_{7-x} grain boundaries
        Speaker: Alexandre Fête (University of Geneva - DQMP)
        3MO3-06_Alexandre_Fete_Room_2.pdf
      • 619
        3MO3-07 Study of Tl(1223) superconducting coatings for beam impedance mitigation in the Future Circular Collider
        Speaker: Dr Emilio Bellingeri (CNR-SPIN)
        FCC_Eucas.pdf
      • 620
        3MO3-08 Development of a fluorine-free polymer-assisted-deposition route for YBa2Cu3O7-x superconducting films
        Speaker: Mircea Nasui (Technical University of Cluj-Napoca)
        3MO3-08_Mircea Nasui_Room 2.pdf
      • 621
        3MO3-09 Control of Jc anisotropy in REBCO thin film with nanoscale Y211 inclusions
        Speaker: Alok K. Jha (Kyushu Institute of Technology)
        3MO3-09_Alok K. Jha_Room 2.pdf
  • Thursday 21 September
    • 4LO1 - SRF CICG Room 1 (Geneva )

      CICG Room 1

      Geneva

      • 622
        4LO1-01 Industrial fabrication and surface treatment of superconducting RF cavities: challenge and main lesson
        Speaker: Paolo Michelato (INFN MIlano)
        4LO1-01_Paolo Michelato_Room 1.pdf
      • 623
        4LO1-02 Path forward for economic and high performance SRF accelerator structures
        Speaker: Ganapati Myneni (Jefferson Lab)
        4LO1-02_Ganapati Myneni_Room 1.pdf
      • 624
        4LO1-03 Superconducting RF and Magnet Technologis for International Linear Collider
        Speaker: Prof. Akira Yamamoto (KEK and CERN)
        4LO1-03_Akira Yamamoto_Room 1.pdf
      • 625
        4LO1-04 Superconducting RF at CERN: operation, projects, and R&D
        Speaker: Frank Gerigk (CERN)
        4LO1-04_Frank Gerigk_Room 1.pdf
      • 626
        4LO1-05 Alternative Coating Techniques and Materials for SRF Cavities
        Speaker: Guillaume Jonathan Rosaz (CERN)
        4LO1-05_Guillaume Rosaz_Room 1.pdf
      • 627
        4LO1-06 Dislocation substructures, and low temperature N doping impact on flux penetration and trapping in SRF Nb
        Speaker: Peter Lee (Florida State University)
        4LO1-06_Peter Lee_Room 1.pdf
    • 4MO1 - Bi-based and A15 Materials CICG Room 3+4

      CICG Room 3+4

      Geneva
    • 4MO2 - MgB2 CICG Room 2

      CICG Room 2

      Geneva
      • 635
        4MO2-01 Improvement in microstructure and critical current density of in situ PIT MgB2 wires by cold working with a swaging machine
        Speaker: Hiroaki Kumakura (National Institute for Materials Science)
        4MO2-01_Hiroaki Kumakura_Room 3+4.pdf
      • 636
        4MO2-02 Copper stabilized dense MgB2 wires fabricated by two types of methods: mechanical milling and internal magnesium diffusion
        Speaker: Motomune Kodama (Hitachi, Ltd. Research & Development Group)
        4MO2-02_Motomune Kodama_Room 3+4.pdf
      • 637
        4MO2-03 Electro-mechanical studies of MgB2 wires and cables prepared by different processes.
        Speaker: Pavol Kovac (Institute of Electrical Engineering of SAS)
        4MO2-03_Pavol Kovac_Room 3+4.pdf
      • 638
        4MO2-04 Rapid synthesis of MgB2 bulks by inductive heating
        Speaker: Davide Matera
        4MO2-04_Davide Matera_Room 3+4.pdf
      • 639
        4MO2-05 High Trapped Fields in C-doped Mg(B1-xCx)2 Bulk Superconductors Fabricated by Infiltration and Growth
        Speaker: Ashutosh Bhagurkar (Brunel University)
        4MO2-05_Ashutosh Bhagurkar_Room 3+4.pdf
      • 640
        4MO2-06 MgB2 round wires for the high-power superconducting cable demonstrator in the Best Paths project
        Speaker: Matteo Tropeano (Columbus Superconductors, SpA)
        4MO2-06_Matteo Tropeano_Room 3+4.pdf
    • 09:50
      Coffee Break CICG

      CICG

      Geneva
    • Poster : 4EP1 - SQUID Applications and detectors CICG

      CICG

      Geneva
      • 641
        4EP1-01 Scaling Properties of YBCO SQAs
        Speaker: Susan Berggren (Space and Naval Warfare Systems Center Pacific)
      • 642
        4EP1-02 Towards practical HfTi-nanoSQUID sensors
        Speaker: Sylke Bechstein (Physikalisch-Technische Bundesanstalt)
        4EP1-02_Bechstein Sylke.pdf
      • 643
        4EP1-03 X-ray absorption fine structure spectrometer with superconducting-tunnel-junction array detector for light element impurities in heat resistant steels
        Speaker: Masataka Ohkubo (AIST)
      • 644
        4EP1-04 Hot electron bolometer mixer for operation in the mid-infrared region
        Speaker: Akira Kawakami (NICT)
        4EP1-04_kawakami Akira.pdf
      • 645
        4EP1-05 Production of HTS-SQUID magnetometer with ramp-edge junctions exhibiting lowered noise in ac biasing mode
        Speaker: Seiji Adachi (SUSTERA)
      • 646
        4EP1-07 Fabrication and Characterization of large High-Tc Superconducting Quantum Interference Filters
        Speaker: Emma Mitchell (CSIRO Manufacturing)
      • 647
        4EP1-09 Design Map for bi-SQUIDs
        Speaker: Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)
      • 648
        4EP1-10 Static and Radiofrequency magnetic response of High TC Superconducting Quantum Interference Filters made by ion irradiation
        Speaker: Eliana Recoba Pawlowski (Thales Research and Technology)
      • 649
        4EP1-11 A practical SQUID system with two-stage readout scheme
        Speaker: Guofeng Zhang (State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050, China)
      • 650
        4EP1-12 Practical-SQUID current sensors with nanometer-sized Nb-AlOx-Nb Josephson junctions
        Speaker: Jan-Hendrik Storm (Physikalisch-Technische Bundesanstalt)
      • 651
        4EP1-13 Parameters characterization of all-NbN DC-SQUID magnetometer
        Speaker: Liu Quansheng (SIMIT)
      • 652
        4EP1-14 Development of Microwave Kinetic Inductance Detectors with YBCO Spiral Resonators
        Speaker: Seiichiro Ariyoshi (Toyohashi University of Technology)
      • 653
        4EP1-15 Superconducting Imager by means of a Delay Line Current-Biased Kinetic Inductance Detector
        Speaker: Takekazu Ishida (Osaka Prefecture University)
      • 654
        4EP1-16 Low-Noise Series SQUID Array Amplifiers for
        Speaker: Robin Cantor (STAR Cryoelectronics)
      • 655
        4EP1-17 Fe(Se,Te) Josephson junctions, dc-SQUIDs and nanostrips
        Speaker: Carlo Ferdeghini (SPIN-CNR, Istituto Superconduttori)
      • 656
        4EP1-18 Investigation of three-dimensional digital circuits with nanometer Josephson junctions made by Focused Ion Beam
        Speaker: Pascal Febvre (Université Savoie Mont Blanc)
        4EP1-18_Febvre Pascal.pdf
      • 657
        4EP1-19 Investigation of the Harmonic Mixer and Low Frequency Converter Regimes in a Superconducting Tunnel Junction
        Speaker: Konstantin Kalashnikov (Moscow Institute of Physics and Technology)
      • 658
        4EP1-20 Development of the devices for non-destructive testing based on SQUID systems.
        Speaker: Konstantin Kalashnikov (Moscow Institute of Physics and Technology)
    • Poster : 4EP2 - Josephson Junctions and devices CICG

      CICG

      Geneva
      • 659
        4EP2-04 Metrology for Single Flux Quantum Electronics
        Speaker: Adam Sirois (NIST-Boulder)
      • 660
        4EP2-07 Fabrication and evaluation of hetero-epitaxial multilayer for Nb/AlN/Nb junctions
        Speaker: Yasuhiro Odashima (Yamagata University)
      • 661
        4EP2-08 Circuit Modification and Parameters Optimization for a High Frequency RSFQ T1FF
        Speaker: Tahereh Jabbari (Electrical Engineering Department, Sharif University of Technology)
      • 662
        4EP2-09 Josephson junctions arrays of alternating S and N film parts
        Speaker: Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)
      • 663
        4EP2-10 Resonances and phase locking in Josephson high-Q circuits
        Speaker: Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)
      • 664
        4EP2-11 High-Tc Josephson junctions as quasiclassical THz detectors
        Speaker: Yuriy Divin (Kotelnikov Institute of Radio Engineering and Electronics of Russian Academy of Sciences)
      • 665
        4EP2-12 Focused He+-Ion Beam Irradiated High Tc Josephson Junctions
        Speaker: Francois Couedo (Physics and Materials Laboratory (LPEM), ESPCI-PSL-CNRS-UPMC)
      • 666
        4EP2-13 Restoration of Josephson Current by Applying Vertical Magnetic Field
        Speaker: Atsushi Suzuki (Kanagawa University)
      • 667
        4EP2-14 Terahertz emission from electrode structure optimized Bi-2212 intrinsic Josephson junctions
        Speaker: Teppei Uchida (Yamagata University)
      • 668
        4EP2-15 Josephson standards for a new AC quantum voltage infrastructure (in the scope of the ACQ-PRO EMPIR project)
        Speaker: Paolo Durandetto (INRiM - Istituto Nazionale di Ricerca Metrologica)
        4EP2-15_Durandetto Paolo.pdf
      • 669
        4EP2-16 Modulation characteristics of a Josephson current through Nb tunnel junction by a parallel magnetic field and a perpendicular magnetic field
        Speaker: Norimichi Watanabe (Kanagawa University)
      • 670
        4EP2-17 Measurement of Specific Capacitance for Nb/Al-AlOx/Nb Josephson Tunnel Junctions
        Speaker: Xiong Wei (Shanghai institute of microsystem and information technology)
      • 671
        4EP2-18 Measurement of thickness dependence of superconductivity in epitaxial NbN films
        Speaker: Zhang Qiyu (Shanghai Institute of Microsystem and Information Technology)
      • 672
        4EP2-21 Quantum memcapacitance with transmon-resonator system
        Speaker: Denys Karpov (B. Verkin ILTPE of NASU)
        4EP2-21_Karpov Denys.pdf
      • 673
        4EP2-22 Josephson quantum DAC based on binary divided 1-V SNIS array
        Speaker: Bruno Trinchera (INRIM - Istituto Nazionale di Ricerca Metrologica)
      • 674
        4EP2-23 Critical current scattering in series arrays of HTS SQUIDs based on ion-damaged barrier Josephson junctions
        Speaker: Denis Crété (Unité Mixte de Physique CNRS/THALES)
        4EP2-23_Crété Denis.pdf
      • 675
        4EP2-24 Megahertz Waveform Synthesis with the Josephson Arbitrary Waveform Synthesizer
        Speaker: Justus Brevik (NIST Boulder)
    • Poster : 4LP1 - Accelerator magnets and cables CICG

      CICG

      Geneva
      • 676
        4LP1-01 An High Field Insert Accelerator Class Dipole Magnet Constructed with Roebel Multi-tape HTS Cable
        Speaker: Glyn Kirby (CERN)
        4LP1-01_Kirby Glyn.pdf
      • 677
        4LP1-02 Quench propagation in Nb3Sn cos-theta 11 T dipole model magnets in high stress areas
        Speaker: Franco Julio Mangiarotti (CERN)
        4LP1-02 poster.pdf
      • 678
        4LP1-03 Simulation of a Quench Event in the Reconfigured LHC Main Dipole Circuit Including the 11 T Magnets for the High-Luminosity Upgrade
        Speaker: Alejandro Fernandez Navarro (CERN)
        4LP1-03_Fernandez Navarro Alejandro.pdf
      • 679
        4LP1-04 Finite Element Analysis of the mechanical conditions in the Nb3Sn cable of the DS11T dipole magnet during operation
        Speaker: Christian Löffler (CERN)
        FEA of the mechanical conditions in the Nb3Sn cable of the DS11T dipole magn-POSTER.pdf
      • 680
        4LP1-05 Advanced Nb3Sn Conductors Tested in a Racetrack Coil Configuration for the 11T Dipole Project
        Speaker: Hugo Bajas (CERN)
      • 681
        4LP1-06 Design of a 4 Tm forward superconducting dipole for the FCC-hh detector magnet system
        Speaker: Erwin Bielert (University of Illinois at Urbana-Champaign (UIUC) and CERN)
      • 682
        4LP1-08 Measuring the Magnetic Center Behavior and Field of FRIB Superconducting Magnets
        Speaker: Ge Zhengfu (XI’AN superconducting magnet technology co.，ltd)
      • 683
        4LP1-09 Process gas characterisation and control during Nb3Sn coil reaction heat treatment
        Speaker: Christian Scheuerlein (CERN)
      • 684
        4LP1-10 Design and Testing of a Demonstration HTS dipole Magnet at 77 K
        Speaker: Timing Qu (Tsinghua University)
      • 685
        4LP1-11 Trans National Access to CERN Superconducting Magnet Test Facility within the framework of EUCARD2
        Speaker: Marta Bajko (CERN)
      • 686
        4LP1-13 Nitrogen Cryogenic System for the NICA Accelerator Complex at JINR
        Speaker: Iuliia Mitrofanova (JINR)
        4LP1-13_Mitrofanova Iuliia.pdf
      • 687
        4LP1-14 Compact common-coil design for a future collider
        Speaker: Emmanuele Ravaioli (LBNL)
      • 688
        4LP1-15 Prototype of the short-period superconducting undulator with neutral poles: test results
        Speaker: Nikolay Mezentsev (Budker Institute of Nuclear Physics)
      • 689
        4LP1-16 Construction and cold test of the superferric octupole for the LHC Luminosity upgrade
        Speaker: Marco Statera (Istituto Nazionale di Fisica Nucleare)
        4LP1-16_Statera Marco.pdf
      • 690
        4LP1-17 Assembly and test of the Nb3Sn dipole magnet FRESCA2
        Speaker: Paolo Ferracin (CERN)
    • Poster : 4LP2 - Ancillaries and Technology CICG

      CICG

      Geneva
      • 691
        4LP2-01 Theoretical Expressions of Output Errors in Two Types of Superconducting Level Sensors
        Speaker: Kazuhiro Kajikawa (Kyushu University)
      • 692
        4LP2-02 Strain measurements with Fiber Bragg Grating sensors in the short models of the HiLumi LHC Low-Beta Quadrupole Magnet MQXF
        Speaker: Antonella Chiuchiolo (CERN)
      • 693
        4LP2-03 A three-dimensional measurement system for HTS magnetic levitation bearings
        Speaker: Li Wanjie (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 694
        4LP2-04 Determination of the N exponent of 2G HTS tapes from V-I curves using a thermally stabilized fast pulsed system
        Speaker: Rubens de Andrade Junior (Universidade Federal do Rio de Janeiro)
        4LP2-04_Barusco Pedro.pdf
      • 695
        4LP2-05 Instrumentation for laboratorial high current tests of 3-phase Cold Dielectric HTS Power Cable
        Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))
        4LP2-05_Neves Marcelo.pdf
      • 696
        4LP2-06 Novel rotating coil setup for definition of the magnetic field quality for XFEL magnets
        Speaker: Yury Klimchenko (JSC «D.V.Efremov Institute of Electrophysical Apparatus» NIIEFA)
        4LP2-06_Klimchenko Yury.pdf
      • 697
        4LP2-07 A Method for Monitoring Unbalanced Three-Phase HTS Cable Systems via Time-Frequency Domain Reflectometry
        Speaker: Geon Seok Lee (Yonsei University)
        4LP2-07_Lee Geon Seok.pdf
      • 698
        4LP2-08 Variable Temperature Insert for Measurement of Critical Current in HT Superconductors
        Speaker: David Richter (CERN)
      • 699
        4LP2-09 Conduction Cooled HTS Current Leads for the SIS100 Corrector Magnets
        Speaker: Alexander Bleile (GSI)
        4LP2-09_Bleile Alexander.pdf
      • 700
        4LP2-10 Design of YBCO HTS current leads for high field medical cyclotron application
        Speaker: Kaizhong Ding (institute of plasma physics, Chinese Academy of Sciences)
      • 701
        4LP2-11 Experimental Test of a Multistage Cooled Current Lead for Superconducting High Current DC Applications, designed for an Operating Current of 20 kA
        Speaker: Mathias Noe (Chair for Energy Systems and Energy Management at University of Kaiserslautern)
      • 702
        4LP2-12 Design, Testing and Commissioning of 25.4 kA HTS Current Leads
        Speaker: Michael Boersch (WEKA AG)
      • 703
        4LP2-13 Cylindrical geometry flux-pump dynamos
        Speaker: Zhenan Jiang (Victoria University of Wellington)
        4LP2-13_Bumby Chris.pdf
      • 704
        4LP2-14 Cryogenic Electrical Insulation Characteristics of Solid Insulator for the DC HTS Cable
        Speaker: Haejong Kim (KERI)
      • 705
        4LP2-15 Discharge mechanisms in liquid nitrogen – breakdown field strength of gaseous nitrogen
        Speaker: Nicholas Hill (TU Braunschweig)
        4LP2-15_Hill Nicholas.pdf
      • 706
        4LP2-16 Keeping Cool Under Pressure: Dielectric Strength of Solid Insulation in Boiling Liquid Nitrogen
        Speaker: Zhiyang Jin (University of Canterbury)
        4LP2-16_Jin Zhiyang.pdf
      • 707
        4LP2-17 The Trap Distribution And Dielectric Failure Strength Of Polyamide Film Under DC And Repetitive Pulse Voltage Combination
        Speaker: Mingyang Wang (Tianjin University)
      • 708
        4LP2-18 Enhanced Dielectric Breakdown Strength of Cryogenic Gas Mixtures to be Used in Superconducting Power Devices
        Speaker: Sastry Pamidi (Center for Advanced Power Systems)
        4LP2-18_Cheetham Peter.pdf
      • 709
        4LP2-21 Breakdown and Partial Discharge Characteristics of Transformer Board and Insulating Paper Materials in Liquid Nitrogen
        Speaker: Christof Humpert (TH Köln (University of Applied Sciences))
        4LP2-21_Humpert Christof.pdf
      • 710
        4LP2-22 Influence of Pressure on Breakdown Characteristics of Liquid Nitrogen in Non-uniform Electric Fields
        Speaker: Christof Humpert (TH Köln (University of Applied Sciences))
        4LP2-22_Humpert Christof.pdf
      • 711
        4LP2-23 Arc Energy Evaluation In Liquid Nitrogen
        Speaker: Muhammad Junaid (State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University)
      • 712
        4LP2-24 Trap Distribution and Dielectric Breakdown of Irradiated Polyimide Film under Combined DC and Pulse Voltage in LN2
        Speaker: Boxue Du (Tianjin University)
      • 713
        4LP2-25 Tree Growth Characteristics of Epoxy Resin in LN2 under DC overlapped pulse voltage
        Speaker: Boxue Du (Tianjin University)
      • 714
        4LP2-26 Partial Discharge and Breakdown Behavior of Syntactic Foams at 77 K
        Speaker: Stefan Seibel (RWTH Aachen University)
        4LP2-26_Seibel Stefan.pdf
      • 715
        4LP2-27 Analysis of a superconducting arc-induction type DC circuit breaker for the stability betterment in the direct current system
        Speaker: Sangyong Park (CHOSUN UNIVERSITY)
      • 716
        4LP2-27 Cryogenic considerations for cooling superconducting links and application to the high luminosity upgrade of the Large Hadron Collider (LHC)
        Speaker: Daniel Berkowitz Zamora (CERN)
        Cryogenic considerations for cooling SC links and applications for the HL LHC - poster.pdf
    • Poster : 4LP3 - Design , manufacture & test of HTS systems CICG

      CICG

      Geneva
      • 717
        4LP3-01 Minimum quench energy of a wind and react Bi-2212 coil in the temperature region 4.2 to 30 K immersed in either liquid helium, vapour or vacuum.
        Speaker: Edward Young (University of Southampton)
      • 718
        4LP3-03 A System for the Generation of Reversible Magnetic Fields using Bulk Superconductors
        Speaker: Louis Dupont (Normandie Université, ENSICAEN, UNICAEN, CNRS, CRISMAT)
      • 719
        4LP3-05 A novel Current Switch Controlled by Alternating Current Magnetic Field
        Speaker: Chao Li (University of Cambridge)
      • 720
        4LP3-07 Conduction Cooled HTS Dipolar Magnet, Realization and Experimental Results
        Speaker: Dan Enache (National Institute for Research and Development in Electrical Engineering, ICPE-CA)
        4LP3-07_Dobrin Ion.pdf
      • 721
        4LP3-08 Fabrication and testing of Bi-2212 test coils for high field research magnets
        Speaker: Steven Ball (Oxford Instruments)
        EUCAS 2017 SB 3.pdf
      • 722
        4LP3-09 Design and Test of a double pancake coil wound by HTS Roebel cable
        Speaker: Peng Song (Tsinghua University)
        4LP3-09_Song Peng.pdf
      • 723
        4LP3-10 Manufacture and Test of a 3 T Class Insert Coil with YBCO-Coated Conductor
        Speaker: Yi Shi (Institute of Plasma Physics Chinese Academy of Sciences)
        4LP3-10_Shi Yi.pdf
      • 724
        4LP3-11 Test of the First HTS Demonstrator Coil in the 11 T Background Field of the SULTAN Facility
        Speaker: Pierluigi Bruzzone (École Polytechnique Fédérale de Lausanne)
      • 725
        4LP3-12 Validation of the electromagnetic design of a REBCO Superconducting Self-Supplied Electromagnetic Launcher through modelling and characterization
        Speaker: Arnaud Badel (University Grenoble Alpes–CNRS)
    • Poster : 4LP4 - HTS Magnets and Cables CICG

      CICG

      Geneva
      • 726
        4LP4-02 Experimental verifications of REBCO layer winding for persistent current operation
        Speaker: Yasuyuki Miyoshi (Japan Superconductor Technology, Inc.)
        4LP4-02_Miyoshi Yasuyuki.pdf
      • 727
        4LP4-03 A highly reproducible superconducting joint between REBCO coated conductors made by a novel method
        Speaker: Tatsuoki Nagaishi (Sumitomo Electric)
      • 728
        4LP4-04 Persistent superconducting Joint of REBCO tapes for HTS-MRI magnets
        Speaker: Akinobu Nakai (Furukawa Electric co.,ltd)
      • 729
        4LP4-05 Measurement of the inter strand resistance in Roebel cable made of REBCO tapes
        Speaker: Jerome Fleiter (CERN)
      • 730
        4LP4-06 Design Aspects of ReBCO CORC based Cable-In-Conduit Conductors
        Speaker: Tim Mulder (CERN and the University of Twente)
        4LP4-06_Mulder Tim.pdf
      • 731
        4LP4-07 Superconducting High Current ReBCO CORC Bus bars for Large Detector Magnets
        Speaker: Tim Mulder (CERN and the University of Twente)
        4LP4-07_Mulder Tim.pdf
      • 732
        4LP4-08 Advanced intermediate lengths of punch and coat processed HTS-Roebel cables in EuCARD2
        Speaker: Anna Kario (Karlsruhe Institute of Technology)
      • 733
        4LP4-09 Mechanical Characteristics of HTS CrossConductor Strands at Cryogenic Temperature
        Speaker: Klaus P. Weiss (Karlsruhe Institute of Technology)
        EUCAS_2017_4LP4-09_Mechanical_Characteristics-Weiss.pdf
      • 734
        4LP4-10 Optimization of Winding Technique Based on Anisotropic Characteristics of Commercial REBCO Tapes
        Speaker: Jie Sheng (University of Bath)
      • 735
        4LP4-11 Quench Characteristics of 2G YBCO Roebel Cable in a Pancake Coil
        Speaker: Yifeng Yang (University of Southampton)
      • 736
        4LP4-12 Could superconducting magnets protect astronauts against space radiation?
        Speaker: Riccardo Musenich (INFN)
    • Poster : 4LP5 - Other Large Size Application CICG

      CICG

      Geneva
      • 737
        4LP5-03 Enhancement of Magnetic Field Sensing Accuracy by Using High-Temperature Superconductor Shields in Multilayer Planar Configuration
        Speaker: Jozef Kvitkovic (Florida State University, Center for Advanced Power Systems)
        4LP5-03_Kvitkovic Jozef.pdf
      • 738
        4LP5-04 Manufacturing of coil formers by integral open-die forging and CNC ring rolling process
        Speaker: Manuel Spielhofer (Imbach & Cie AG)
        4LP5-04_Stocker Urban.pdf
      • 739
        4LP5-05 Manufacture technology of the 9.4 T whole-body MRI superconducting coils
        Speaker: Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 740
        4LP5-06 Development of a 9.4T Whole-body MRI Superconducting Magnet
        Speaker: Lankai Li (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 741
        4LP5-07 Modelling and Testing of MgB2 Segmented Coils and Persistent joints for MgB2 Magnets
        Speaker: Mike Sumption (MSE, The OHio State University)
      • 742
        4LP5-08 Stress induced magnetic field in-homogeneity in a 1.5T superconducting MRI magnet
        Speaker: Sankar Ram Thekkethil (Inter University Accelerator Centre)
      • 743
        4LP5-09 Design of superconducting external interference Screening (EIS) coils for 1.5T MRI Magnet
        Speaker: Mukesh Kumar (Inter University Accelerator Centre)
      • 744
        4LP5-10 Stress Analysis Of Cryogenic Suspension System Of Superconducting Mri Magnet Cryostat
        Speaker: Navneet Kumar Suman (Inter University Accelerator Centre)
      • 745
        4LP5-11 Reduction methods of screening currents in REBCO multiple coils based on transport-current control
        Speaker: Yuichi Ozone (Waseda Univesity)
      • 746
        4LP5-12 Quench Analysis Of A Whole-Body 1.5 T Superconducting MRI Magnet
        Speaker: Vijay Soni (Inter-University Accelerator Centre, New Delhi)
      • 747
        4LP5-13 Numerical Analysis of Eddy Current Forces in the Thermal Shield of a Superconducting Magnet during Quench Events
        Speaker: Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 748
        4LP5-16 Flux expulsion/pinning study in large grain SRF cavities with different impurity
        Speaker: Pashupati Dhakal (Jefferson Lab)
      • 749
        4LP5-17 Performance Testing of Superconducting RF cavities at CERN in the post construction era of the LHC
        Speaker: Alick Macpherson (CERN)
        EUCAS_Poster_Macpherson.pdf
      • 750
        4LP5-18 Commissioning of IPN Orsay Vacuum furnace and first successful Heat treatment of SRF bulk Nb cavities
        Speaker: Mohammed Fouaidy (Institut de Physique Nucléaire)
      • 751
        4LP5-19 Towards Optimization of Centrifugal Barrel Polishing Procedure for Treatment of Niobium Cavities
        Speaker: Alena Prudnikava (University of Hamburg/DESY)
      • 752
        4LP5-20 Multi-physics Computation and Testing on Pre-Tuning of a Prototype of 1.5-GHz SRF Cavity
        Speaker: Chih-Hung Lo (National Synchrotron Radiation Research Center)
      • 753
        4LP5-21 ReBCO coated conductors for the future circular hadron collider beam screen
        Speaker: Joffre Gutierrez (ICMAB - CSIC, Bellaterra, Spain)
      • 754
        4LP5-22 Summary of low temperature nitrogen doping study on SRF cavities
        Speaker: Pashupati Dhakal (Jefferson Lab)
      • 755
        4LP5-23 Characteristics analysis in Resonance coil applied to Superconducting Wireless Power Transfer
        Speaker: In-Sung Jeong (Chosun University)
      • 756
        4LP5-24 ORE SEPARATOR MADE OF HIGH-TEMPERATURE SUPERCONDUCTORS YBCO
        Speaker: Jiangdi Fan (Chongqing Academy of Science and Technology)
    • Poster : 4LP6 - Motors, Generators and other Rotating Machines CICG

      CICG

      Geneva
      • 757
        4LP6-01 Testing of a full-scale HTS coil for a 2.5 MW wind turbine generator
        Speaker: Yudong Jiang (Dongfang Electric Corporation)
      • 758
        4LP6-02 Design of a 15 kW fully superconducting synchronous generator
        Speaker: Timing Qu (Department of mechanical engineering, Tsinghua University)
        4LP6-02_Li Yufan.pdf
      • 759
        4LP6-03 Electromagnetic characteristic analysis and Optimization design of a novel HTS coreless induction motor with high speed
        Speaker: Bin Liu (School of Electrical Engineering, Beijing Jiaotong University)
        4LP6-03_Liu Bin.pdf
      • 760
        4LP6-04 System approach of usability of HTS electrical machines in future electric aircraft
        Speaker: Dmitry Dezhin (Moscow Aviation Institute)
        4LP6-04_Dezhin Dmitry.pdf
      • 761
        4LP6-06 A Large Scale Double-Stator Direct Driving HTS Wind Generator
        Speaker: Yi Cheng (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)
        4LP6-06_Cheng Yi.pdf
      • 762
        4LP6-07 HTS Inductor Motor with Combined Excitation
        Speaker: Roman Ilyasov (Moscow Aviation Institute)
      • 763
        4LP6-08 Brushless non-steel HTS generator with combined excitation with trapped field plates on the rotor
        Speaker: Kirill A. Modestov (Moscow Aviation Institute (MAI))
        4LP6-08_Modestov Kirill A..pdf
      • 764
        4LP6-09 A new type of superconducting motor with 2G HTS magnet rings
        Speaker: Min Zhang (University of Bath)
      • 765
        4LP6-10 Electromagnetic Design of Superconducting Synchronous Motors for Electric Aircraft Propulsion
        Speaker: Yutaka Terao (University of Tokyo)
      • 766
        4LP6-11 Electromechanical Design of a MW Class Wave Energy Converter with a Tubular HTS Linear Generator
        Speaker: Hailian Jing (Tokyo University of Marine Science and Technology)
        4LP6-11_Jing Hailian.pdf
      • 767
        4LP6-12 Electrical analysis of 10 MW superconducting generator for aircraft applications
        Speaker: Kiwook Yun (Kyushu university)
      • 768
        4LP6-13 Comparative study of 1MW PM and HTS synchronous generators for marine current turbine
        Speaker: Zhi Li (2-1-6, Etchujima, Koto-ku, Tokyo, JAPAN)
        4LP6-13_Li Zhi.pdf
      • 769
        4LP6-14 Design of a 20 MW Fully Superconducting Wind Turbine Generator to Minimize the Levelized Cost of Energy
        Speaker: Hoang Trung - Kien (GeePs, CentraleSupelec, University of Paris-Saclay)
      • 770
        4LP6-15 Design and Performance of AC Superconducting Motors for Aerospace Electric Propulsion Systems
        Speaker: Charalampos D. Manolopoulos (School of Electrical and Electronic Engineering, The University of Manchester)
        4LP6-15_Manolopoulos Charalampos D.pdf
      • 771
        4LP6-16 Design report of a 4KW superconducting HTS synchronous motor using HTS stacked tapes.
        Speaker: Mehdi Baghdadi (University of Greenwich)
      • 772
        4LP6-17 Design study of 2MW fully superconducting motors
        Speaker: Shogo Fukuda (Kyushu University)
      • 773
        4LP6-18 A superconducting machine for Aircraft application
        Speaker: Alexandre Colle (Universite de Lorraine - SAFRAN Tech)
      • 774
        4LP6-19 Design Aspects and Testing of Superconducting Flywheels
        Speaker: Achim Hobl (Babcock Noell GmbH)
        4LP6-19_Hobl Achim.pdf
      • 775
        4LP6-20 The Effect Research of Armature Position on Electromagnetic Propulsion Efficiency
        Speaker: Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 776
        4LP6-22 Small-scale motor with AC HTS windings
        Speaker: Dmitry Dezhin (Moscow Aviation Institute)
    • Poster : 4LP7 - FCL and the Grid CICG

      CICG

      Geneva
      • 777
        4LP7-01 New technique for using SMES to limit fault currents in wind farm power systems
        Speaker: Mariam Elshiekh (University of Bath)
      • 778
        4LP7-02 Characteristics of Reactor type superconducting DC current limiter for improved stability in the DC power system
        Speaker: Hyewon Choi (CHOSUN University)
      • 779
        4LP7-03 Optimum Positioning Of HTS Based Resistive Fault Current Limiter
        Speaker: Prof. V. V. Rao (INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR)
      • 780
        4LP7-04 Feasible Application Study of Different Types of Superconducting Fault Current Limiters in HVDC Grids
        Speaker: Ho-Yun Lee (Hanyang University)
      • 781
        4LP7-06 Application of Flux-Coupling SFCL to Secure Fault Ride Through in Carbon-Free Stand-Alone Microgrid
        Speaker: Soo Hyoung Lee (Korea Electrotechnology Research Institute (KERI))
      • 782
        4LP7-08 Power Differential Protection for Transmission Lines with Superconducting Fault Current Limiters
        Speaker: Diaa-Eldin A. Mansour (Kafrelsheikh University)
      • 783
        4LP7-09 Hardware-in-the-loop Simulation on Fault Current Limiting Operation of RE-123 Coated Conductors under the Influence of Spatial Inhomogeneity
        Speaker: Kohei Higashikawa (Kyushu University)
      • 784
        4LP7-10 DC Superconducting Fault Current Limiter Applications and Technical Indexes
        Speaker: Bin Li (School of Electrical & Information Engineering, Tianjin University, China)
      • 785
        4LP7-11 Fault Current Limitation Coordination in Electric Power Grid with Superconducting Fault Current Limiters
        Speaker: Naoki Hayakawa (Nagoya University)
      • 786
        4LP7-13 Study of SFCL for multi-terminal HVDC network
        Speaker: Ying Xin (Tianjin University)
        4LP7-13_Xin Ying.pdf
      • 787
        4LP7-15 PHILS of Transmission Line Protection System for the application of 154 kV SFCL in Korea
        Speaker: Seung Ryul Lee (KERI)
      • 788
        4LP7-16 Research on the Application of Active Saturated Iron-Core Superconductive Fault Current Limiters in the VSC-HVDC System
        Speaker: Botong Li (School of Electrical and Information Engineer, Tianjin University)
      • 789
        4LP7-17 Comparison between Different Models of Superconducting Fault Current Limiter with Application to an Electric Power Circuit
        Speaker: José Juan Pérez-Chávez (National Autonomous University of Mexico (UNAM))
        4LP7-17_Pérez-Chávez José Juan.pdf
      • 790
        4LP7-18 Enhancement test of Critical Clearing Time of One-machine Infinite Bus Transmission System by Use of SFCL
        Speaker: Yasuyuki Shirai (Kyoto University)
        4LP7-18_Shirai Yasuyuki.pdf
      • 791
        4LP7-19 Simulation study of the impact of superconducting fault current limiters to power grid
        Speaker: Fei Liang (Bath University)
      • 792
        4LP7-20 Study of a Modified Flux-Coupling-Type Superconducting Fault Current Limiter for Protection of a DC Micro-Grid
        Speaker: Lei Chen (Wuhan University)
      • 793
        4LP7-21 Characteristics of Superconducting DC interrupting system for operational reliability in the full scale converter wind turbines
        Speaker: Jun-Beom Kim (Chosun University)
      • 794
        4LP7-22 Optimal Location of Superconducting Fault Current Limiters (SFCLs) for Fault Current Reduction in Korean AC Transmission Grids
        Speaker: Jin Hur (Sangmyung University)
      • 795
        4LP7-23 Performance Enhancement of PMSG Wind Turbines with DC Microgrids Using Resistive-Type SFCL
        Speaker: Diaa-Eldin A. Mansour (Tanta University)
      • 796
        4LP7-24 Analysis of Characteristics of Blocking Part for Optimized Inductor-Combined Superconducting DC Fault current limiter
        Speaker: Seonho Hwang (Chosun University)
    • Poster : 4MP1 - Fe-Based CICG

      CICG

      Geneva
      • 797
        4MP1-01 Pulsed Laser Deposition of Fe-based superconductor thin films with 355nm Nd:YAG laser
        Speaker: Sven Meyer (Karlsruhe Institute for Technology)
      • 798
        4MP1-02 Investigation of dimensional dependent electronic properties in tetragonal iron chalcogenides
        Speaker: Ekaterina Kozlyakova (Lomonosov Moscow State University, Moscow, Russia)
      • 799
        4MP1-04 Phase separation and microstructure in superconducting FeSe1-xTex materials
        Speaker: Andrea Masi (ENEA - Università Roma Tre)
        4MP1-04_Masi.pdf
      • 800
        4MP1-05 Superconducting properties of (Ba,Na)Fe2As2 powder-in-tube wires and tapes
        Speaker: Shoko Itou (Department of Physics, Tokyo University of Science)
      • 801
        4MP1-06 Production of silver added bulk FeSe material by ball-milling technique
        Speaker: Furutani Kouichi (Shibaura Institute of Technology)
      • 802
        4MP1-07 Deposition and properties of Iron-Chalcogenide Fe(Se,Te) film
        Speaker: Antonella Mancini (ENEA)
      • 803
        4MP1-09 On The Nature Of Unusual Microwave Response Of Thin FeSe1-xTex Film Near Critical Temperature
        Speaker: Guoqiang Li (O.Usikov IRE NAS of Ukraine)
        4MP1-09_Cherpak Nickolay (Mykola).pdf
      • 804
        4MP1-10 Effect of post annealing on physical properties of BaFe2As2-based superconductors
        Speaker: Shigeyuki Ishida (AIST)
      • 805
        4MP1-13 Structure and superconducting properties of oxypnictide thin films by molecular beam epitaxy
        Speaker: Sandra Kauffmann-Weiss (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP))
      • 806
        4MP1-15 Can topological transitions be exploited to engineer intrinsically quench-resistant wires?
        Speaker: Jorge Quintanilla (University of Kent)
    • Poster : 4MP2 - MgB2 2/2 CICG

      CICG

      Geneva
      • 807
        4MP2-01 Development status of MgB2 superconducting wires at KAT
        Speaker: Sehoon Jang (KAT)
      • 808
        4MP2-02 Jc-B-T properties of MgB2 film on Cu tape
        Speaker: Takumu Iwanaka (Hitachi, Ltd)
        4MP2-02_Iwanaka Takumu.pdf
      • 809
        4MP2-03 Properties of Critical Current and Normal Zone Propagation of Multi-filamentary MgB2 Superconducting Wire Cooled by Liquid Hydrogen
        Speaker: Katsuyuki Fujita (Kyoto University)
        4MP2-03_Fujita Katsuyuki.pdf
      • 810
        4MP2-04 A comparative study of new Ge-based additions to MgB2
        Speaker: Dan Batalu (University POLITEHNICA of Bucharest)
        4MP2-04_Batalu Dan.pdf
      • 811
        4MP2-05 Improvement of MgB2 superconducting properties acting on boron precursor by freeze-drying process
        Speaker: Gianmarco Bovone (SPIN Institute)
      • 812
        4MP2-06 MgB2 superconductors produced by Encapsulated Nano Boron with two different magnesium sources
        Speaker: Serap Safran (ANKARA UNIVERSITY)
      • 813
        4MP2-07 Enhanced properties of bulk MgB2 fabricated by an excess Mg method for applications
        Speaker: Ercan Ertekin (Ankara University)
      • 814
        4MP2-08 Open-ends and closed-ends powder-in-tube tapes of MgB2 processed by spark plasma sintering
        Speaker: Gheorghe Virgil Aldica (National Institute of Materials Physics)
      • 815
        4MP2-09 Persistent Current Operation of MgB2 Coils with Superconducting Joints of Reacted Wires
        Speaker: Yota Ichiki (Hitachi, Ltd.)
        4MP2-09_Yota_Ichiki.pdf
      • 816
        4MP2-10 Properties of ex-situ MgB2 bulk samples prepared by uniaxial hot pressing
        Speaker: Wolfgang Häßler (Leibniz-Institut for Solid State and Materials Research (IFW) Dresden)
      • 817
        4MP2-12 Structure and properties of MgB2 bulks, thin films and wires; effect of TiO2 and TiC additions
        Speaker: Tetiana Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine)
        4MP2-12_Prikhna Tetiana.pdf
      • 818
        4MP2-13 Superconducting MgB2 processed by Spark Plasma Sintering for different pulsed current patterns
        Speaker: Petre Badica (National Institute of Materials Physics)
    • Poster : 4MP3 - Basic Properties CICG

      CICG

      Geneva
      • 819
        4MP3-01 Modelling the Critical Current of Surfaces and Grain Boundaries in Superconducting Films at High Magnetic Fields
        Speaker: Alexander Blair (Department of Physics)
        4MP3-01_Blair Alexander.pdf
      • 820
        4MP3-02 Reversible Superconducting Diodes Using Rectified In-plane Vortices in Asymmetrically Multilayered BaHfO3-doped SmBa2Cu3Oy Films
        Speaker: Yuji Tsuchiya (Nagoya Univ.)
      • 821
        4MP3-03 Extraction of the complex resistivity and pinning parameters from microwave surface impedance measurements of coated conductors
        Speaker: Nicola Pompeo (Dipartimento di Ingegneria, Università Roma Tre)
      • 822
        4MP3-06 Superconducting Properties of Endohedral Gallide Cluster Based Mo8Ga41 superconductor
        Speaker: Prakriti Neha (Jawaharlal Nehru University)
      • 823
        4MP3-07 On the origin of critical temperature enhancement in atomically-thin superconductors
        Speaker: Evgeny Talantsev (Robinson Research Institure, Victoria University of Wellington)
      • 824
        4MP3-11 Presents the results of testing to achieve superconducting temperature
        Speaker: Sadeq Kazemifard (fard technology)
    • Poster : 4MP4 - Measurement Techniques 2/2 CICG

      CICG

      Geneva
      • 825
        4MP4-01 High current probe for gas flow Ic(B,T) measurements with ±0.01 K temperature precision: HTS current leads and active temperature compensation system
        Speaker: Christian Barth (University of Geneva, Department of Quantum Matter Physics)
        4MP4-01_Barth Christian.pdf
      • 826
        4MP4-03 Contactless verification of defects in 2G HTSC tapes with two-side superconducting layers
        Speaker: Igor Rudnev (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))
      • 827
        4MP4-04 Finite Element Calculation of the Critical current and Magnetic "Levitation" Force between a Permanent Magnet and a ZFC YBaCuO Sample in Mixed State
        Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))
        4MP4-04_Neves Marcelo.pdf
      • 828
        4MP4-05 Critical Current Density Transport Measurements on ITER Poloidal Field NbTi Strands from 3.5 to 8.0 K, in magnetic fields up to 8.0 T, using a Bespoke Probe
        Speaker: Mark Raine (Durham University Department of Physics)
      • 829
        4MP4-06 Study of Precursor Solution Used For YBCO Films Chemical Solution Deposition: Solution Reactivity and Effects on Film Properties
        Speaker: Valentina Pinto (ENEA)
      • 830
        4MP4-07 Investigation of REBCO Roebel Cable Irreversible Critical Current Degradation Under Transverse Pressure
        Speaker: Jaakko Murtomäki (CERN)
        4MP4-07_Murtomäki Jaakko.pdf
      • 831
        4MP4-08 International round robin test on critical current measurement of RE-Ba-Cu-O (RE=rare earth) superconducting tapes
        Speaker: Gen Nishijima (National Institute for Materials Science)
        4MP4-08_Nishijima Gen.pdf
      • 832
        4MP4-09 Simple Method to Fabricate Intrinsic Josephson Junction Device by Using Water-treatment Process
        Speaker: Hiromi Tanaka (National Institute of Technology, Yonago College)
      • 833
        4MP4-10 Magnetic study of Nb micro-ring using attonewton-sensitivity dynamic cantilever magnetometer
        Speaker: Jae-Hyuk Choi (Korea Reserach Institute of Standards and Science)
      • 834
        4MP4-11 The interfacial thermal surface resistivity between the Nb-Ti filaments and the matrix in High-field multifilamentary composite wires
        Speaker: Francis Ridgeon (Durham University)
      • 835
        4MP4-12 Research on Non-destructive Examination of bracket welds ITER In-Vessel Coils (IVC)
        Speaker: Xiaochuan Liu (Institute of Plasma Physics Chinese Academy of Sciences)
        4MP4-12_Liu Xiaochuan.pdf
    • Poster : 4MP5 - Cuprate Thin Films 2/2 CICG

      CICG

      Geneva
      • 836
        4MP5-01 Ex-situ liquid assisted growth of GdBa2Cu3O7-δ films on Hastelloy metal substrates
        Speaker: Oleksiy Troshyn (THEVA Dünnschichttechnik GmbH)
      • 837
        4MP5-02 Optimization of novel melt-growth heat treatment of YbBa2Cu3O7-δ / Ag tapes
        Speaker: Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 838
        4MP5-04 Surface Decoration as Prospective Artificial Pinning Strategy in Superconducting YBa2Cu3O7-x films
        Speaker: Laura Piperno (Engineering Department, Roma Tre University)
        4MP5-04_Piperno.pdf
      • 839
        4MP5-05 Low temperature fabrication of crack free GdBa2Cu4O8 films on oxide seed layer by molten hydroxide flux method
        Speaker: Keisuke Soeda (shimane university)
      • 840
        4MP5-06 Nanodiamond: a New Tool for Artificial Pinning Center introduction in YBCO Films obtained through Chemical Solution Deposition
        Speaker: Valentina Pinto (ENEA)
      • 841
        4MP5-07 Laser Modification of 2G-HTS Tapes Surface
        Speaker: Neslihan Turan (Gazi University, Ankara, Turkey)
        4MP5-07_Turan Neslihan.pdf
      • 842
        4MP5-08 Enhancement of superconducting properties for low-temperature LPE-REBa2Cu3Oy films via phase decomposition process in various RE elements
        Speaker: Shuhei Funaki (Shimane University)
      • 843
        4MP5-09 Fabrication of YBCO Superconducting Film on {100} Textured Cu Tape via Conductive Buffer Layers
        Speaker: Toshiya Doi (Kyoto University)
      • 844
        4MP5-10 Investigation on the Superconducting Properties of YGBCO/STO/YGBCO Tri-layer
        Speaker: Yanjie Yao (Key laboratory of Artificial Structures and Quantum Control, Shanghai Jiao Tong University)
        4MP5-10_Yao Yanjie.pdf
      • 845
        4MP5-11 Eutectic temperature determination of the BaO-CuO-O system in bulk and in films
        Speaker: Silvia Rasi (Universitat de Girona)
      • 846
        4MP5-13 Flux pinning properties of Hf and Zr-doped Bi,Pb-2223 thin films with columnar defects
        Speaker: Akiyoshi Matsumoto (National Institute for Materials Science)
      • 847
        4MP5-14 Microstructure and superconducting properties of impurity doped Bi,Pb-2223 thin films fabricated sputtering method
        Speaker: Akiyoshi Matsumoto (National Institute for Materials Science)
      • 848
        4MP5-15 Control on phases formation in melt processed (Bi,Pb)-Sr-Ca-Cu-O samples due to Ag and PbO additions
        Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))
        4MP5-15_Neves Marcelo.pdf
      • 849
        4MP5-16 Microstructure and Current Transport of Tl-1223 Thin Film Superconductors
        Speaker: Sigrid Holleis (Atominstitut, TU Wien)
        4MP5-16_Holleis.pdf
      • 850
        4MP5-17 Characterization of electrospun BSCCO nanowires with reduced preparation temperature
        Speaker: Michael Koblischka (Saarland University)
      • 851
        4MP5-18 Assessment of Bi2Sr2CaCu2O8 Thin Films Grown by MOCVD for Power Electronics Applications
        Speaker: Kazuhiro Endo (Kanazawa Institute of Technology)
      • 852
        4MP5-21 Growth of epitaxial YBCO double films derived from solution deposition
        Speaker: Lihua Jin (ShaanxiRare Metals Science and Industry Group Co., Ltd.)
    • Poster : 4MP6 - Strain, Irradiation, Thermal Properties CICG

      CICG

      Geneva
      • 853
        4MP6-01 Evaluation of actual delamination strength of REBCO coated conductors based on the Weibull analysis considering size effect
        Speaker: Shogo Muto (Fujikura Ltd.)
      • 854
        4MP6-02 Thermal stability of commercially available coated conductors
        Speaker: Alan Preuß (Karlsruhe Insitute of Technology)
        4MP6-02_Preuß Alan.pdf
      • 855
        4MP6-03 Unusual thermal properties of nonsuperconducting PrBCO ceramics at low temperatures
        Speaker: Mahieddine Lahoubi (Badji-Mokhtar Annaba University, Faculty of Sciences,)
      • 856
        4MP6-04 Thermal conductivity and dilatation of a Bi-2223/Ag (DI-BSCCO) superconducting wire laminated with Ni-alloy tapes
        Speaker: Yuichi Yamada (Iwate University)
        4MP6-04_Naito Tomoyuki.pdf
      • 857
        4MP6-05 Investigation of light-weight material of cryogenic pipe for aviation application
        Speaker: Masae Kanda (Chubu University)
      • 858
        4MP6-06 Development of High-Strength BSCCO-2223 Tapes
        Speaker: Kozo Osamura (Research Institute for Applied Sciences)
      • 859
        4MP6-07 Application of DIC to extract full field stress-strain data of superconducting coils under thermal contraction
        Speaker: Jorge Pelegrin (University of Southampton)
        4MP6-07_Bailey Wendell.pdf
      • 860
        4MP6-08 Strain effect on quench characteristics of YBCO Coated Conductor
        Speaker: Jiangtao Shi (Southwest Jiaotong University)
        4MP6-08_Shi Jiangtao.pdf
      • 861
        4MP6-09 Structural modelling of REBCO CC tapes in TORT cables
        Speaker: Eva Michalcová (Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava)
        4MP6-09_Michalcová Eva.pdf
      • 862
        4MP6-10 Bending-peeling method to measure interface strength of YBCO tape
        Speaker: Peng Jin (Institute of Electrical Engineering, Chinese Academy of Sciences)
      • 863
        4MP6-11 Delamination strength testing of commercial ReBCO tapes: climbing drum peel testing
        Speaker: Nicholas Long (Victoria University of Wellington)
        4MP6-11_Nicholas Long.pdf
      • 864
        4MP6-12 Effect of mechanical loading on high temperature superconducting tapes during bending of round cables
        Speaker: Marcela Pekarčíková (Slovak University of Technology in Bratislava)
        4MP6-12_Pekarčíková Marcela.pdf
      • 865
        4MP6-13 Mechanical and thermal properties of All-CSD-YBCO superconducting tapes and joints
        Speaker: Michael Baecker (Deutsche Nanoschicht GmbH)
      • 866
        4MP6-14 Electrical and Strain Behaviors of Solid Nitrogen and Conduction Cooled YBCO Coil under Thermal Disturbance and Overcurrent Pulse
        Speaker: Liyuan Liu (Southwest jiaotong university)
        4MP6-14_Liu Liyuan.pdf
      • 867
        4MP6-15 Ion-irradiation effect of microwave surface resistance of YBa2Cu3Oy thin films in magnetic field
        Speaker: Shigetoshi Ohshima (Yamagata University)
      • 868
        4MP6-16 Effect of neutron irradiation on critical currents of some REBaCuO superconducting tapes considered for magnets of fusion reactors
        Speaker: Miloš Jirsa (Institute of Physics CAS)
        poster 4MP6-16.pdf
    • Poster : 4MP7 - Coated Conductors 2/2 CICG

      CICG

      Geneva
      • 869
        4MP7-02 Ic survival of the delaminated coated conductor and its potential application in superconducting joint
        Speaker: Feng Feng (Tsinghua University)
        4MP7-02_Feng Feng.pdf
      • 870
        4MP7-03 Thick YBa2C3O7-x layers with ink jet printing single deposition
        Speaker: Bohores Villarejo (ICMAB - CSIC)
      • 871
        4MP7-04 Electro-mechanical property of YBCO coated conductors lap joint under multi-fields
        Speaker: Xingyi Zhang (Lanzhou University)
      • 872
        4MP7-05 Long length inkjet-printed solution deposition planarization layers for 2G-coated conductors
        Speaker: Marta Vilardell (OXOLUTIA S.L.)
      • 873
        4MP7-06 Manufacturing Process Upgrade and New Research Directions at SuperOx Japan
        Speaker: Valery Petrykin (SuperOx Japan)
      • 874
        4MP7-07 Microstructures of Conductive Buffer Layers for YBCO Coated Conductors Using Cube-Textured Cu Tapes
        Speaker: Ataru Ichinose (Central Research Institute of Electric Power Industry)
      • 875
        4MP7-08 Electrical and mechanical behavior of electrical, Pb- and Cd-free, joints with normal- and superconducting materials at low temperatures
        Speaker: Katrin Bäuml (Schneider Electric Sachsenwerk GmbH)
        4MP7-08_Bäuml Katrin.pdf
      • 876
        4MP7-09 Measurement at 4 K of normal zone propagation velocity in commercial REBCO conductors
        Speaker: Maxime Matras (CERN)
        4MP7-09_Matras Maxime.pdf
      • 877
        4MP7-10 Transport Current Characteristics with Material Properties of the Outer Layer of REBCO 2G Wire Having Composite Structure Using RF Sputtering Deposition Method
        Speaker: Ho Ik Du (Chonbuk National University)
      • 878
        4MP7-11 Evaluation on Properties of YBCO tapes insulated by Electrocoating
        Speaker: Han Zhang (Dongfang Electric Corporation)
      • 879
        4MP7-12 Fabrication and properties of aluminum alloy laminated GdBCO coated conductor
        Speaker: Sang-Soo Oh (Korea Electrotechnology Research Institute)
      • 880
        4MP7-13 Induction soldering of coated conductor high temperature superconducting tapes with lead-free solder alloys
        Speaker: Marian Drienovsky (Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava)
        4MP7-13_Drienovsky Marian.pdf
      • 881
        4MP7-14 Quality management in production of textured templates for 2G HTS wire
        Speaker: Alexey Mankevich (SuperOx)
      • 882
        4MP7-15 Observation of Zero Resistance in As-electrodeposited FeSe
        Speaker: Aichi Yamashita (National Institute for Materials Science)
      • 883
        4MP7-16 Study of Growth Process for YBa2Cu3Oy Coated Conductors with BaZrO3 Flux Pinning Centers by Monitoring Electrical Conductivity
        Speaker: Ryo Teranishi (Kyushu University)
      • 884
        4MP7-17 Interfacial shearing stress induced by flux pinning in a superconducting coated conductor long strip with transport current in a perpendicular magnetic field
        Speaker: Yumei Yang (Lanzhou university of technology)
      • 885
        4MP7-18 Microstructure and texture of a two level undercut-profile Ni-5at.%W substrate for coated conductors
        Speaker: Anders Wulff (Technical University of Denmark)
      • 886
        4MP7-20 PLD manufacturing of superconducting tapes
        Speaker: Ralph Delmdahl (Coherent LaserSystems GmbH & Co. KG)
        4MP7-20_Delmdahl Ralph.pdf
      • 887
        4MP7-21 The effect of BaZrO3 nanoparticles on Jc in longitudinal magnetic field for TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy wires
        Speaker: Kota Hirai (Seikei University)
      • 888
        4MP7-22 An approach to superconducting joints between REBCO coated conductors based on chemical solution deposition
        Speaker: Anke Kirchner (IFW Dresden)
    • 12:15
      Lunch break CICG

      CICG

      Geneva
    • 4EO1 - Digital and Quantum Processings CICG Room 3+4

      CICG Room 3+4

      Geneva
      • 889
        4EO1-01 Recent research developments of adiabatic quantum-flux-parametron circuits technology toward energy-efficient high-performance computing
        Speaker: Yoshikawa Nobuyuki (Yokohama National University)
        4EO1-01_Nobuyuki Yoshikawa_Room 3+4.pdf
      • 890
        4EO1-02 Theory and experimental analysis of the sensitivity of an adiabatic quantum flux parametron
        Speaker: Thomas Ortlepp (CIS Institut fuer Mikrosensorik GmbH (DE))
        4EO1-02_Thomas Ortlepp_Room 3+4.pdf
      • 891
        4EO1-03 One- and Two-Bit Reversible Fluxon Logic Gates
        Speaker: Osborn Kevin (U. of Maryland, USA)
      • 892
        4EO1-04 Coherent control of superconducting transmon qubits with an on-chip single flux quantum driver
        Speaker: Leonard Jr, Edward (University of Wisconsin - Madison)
        4EO1-04_Edward Leonard Jr._Room 3+4.pdf
      • 893
        4EO1-05 Direct Detection of Single Flux Quantum Generated in Superconducting Strip Photon Detectors
        Speaker: Abe Yutaka (Yokohama National University)
        4EO1-05_Yutaka Abe_Room 3+4.pdf
      • 894
        4EO1-06 Superconductor Electronics Fabrication Process with Self-Shunted Josephson Junctions and Kinetic Inductors
        Speaker: Tolpygo Sergey (MIT Lincoln Laboratory)
        4EO1-06_Sergey Tolpygo_Room 3+4.pdf
      • 895
        4EO1-07 Energy-Efficient Dual-Port 32-word 8-bit ERSFQ Register File
        Speaker: Alex Kirichneko (HYPRES)
        4EO1-07_Alex Kirichneko_Room 3+4.pdf
      • 896
        4EO1-08 Progress on development of an rf waveform synthesizer with quantum-based accuracy
        Speaker: Manuel Castellanos Beltran (NIST)
        4EO1-08_Manuel Castellanos Beltran_Room 3+4.pdf
    • 4LO2 - Large Scale: Accelerator Magnets CICG Room 1

      CICG Room 1

      Geneva
    • 4MO3 - Coated Conductor: Processing and Properties CICG Room 2

      CICG Room 2

      Geneva
      • 904
        4MO3-01 European progress toward Nanostructure engineering in coated conductors
        Speaker: Anna Palau (Institut de Ciencia de Materials de Barcelona, ICMAB-CSIC)
        4MO3-01_Anna Palau_Room 2.pdf
      • 905
        4MO3-02 Comparison of in-field transport Ic , Jc, and Fp for R&D and production ReBCO tapes
        Speaker: Dmytro Abraimov (NHMFL)
        4MO3-02_Dmytro Abraimov_Room 2.pdf
      • 906
        4MO3-03 Thick secondary phase pinning-enhanced YBCO films on technical templates
        Speaker: Max Sieger (IFW Dresden)
        4MO3-03_Max Sieger_Room 2.pdf
      • 907
        4MO3-04 Effective vortex-pinning features of YBa2Cu3O7-x films with self-assembled Ba2YTaO6/Ba2YNbO6 columnar defects, grown on ABAD-based metallic templates
        Speaker: Francesco Rizzo (ENEA)
        4MO3-04_Francesco Rizzo_Room 2.pdf
      • 908
        4MO3-05 Temperature dependence of flux pinning in REBCO coated conductors with artificial pinning centers
        Speaker: Prof. Kaname Matsumoto (Kyushu Institute of Technology)
        EUCAS 2017 matsumot 1.pdf
      • 909
        4MO3-06 Jointing Technique of Coated Conductors by Pastes Including Nano-sized Metal Particles
        Speaker: Takato Machi (National Institute of Advanced Industrial Science and Technology(AIST))
        4MO3-06_Takato Machi_Room 2.pdf
      • 910
        4MO3-07 Long Coated Conductors with Uniform and High In-field Performance
        Speaker: Teruo Izumi (Advanced Industrial Science and Technology)
        4MO3-07_Teruo Izumi_Room 2.pdf
      • 911
        4MO3-08 Chemical solution deposition growth of low fluorine thick coated conductors of YBa2Cu3O7 and YBa2Cu3O7 nanocomposites with preformed BZO nanoparticles
        Speaker: Cornelia Pop (Materials Science Institut of Barcelona (ICMAB-CSIC))
        4MO3-08_Cornelia Pop_Room 2.pdf
    • 4P1 - Plenary 4 CICG Room 1

      CICG Room 1

      Geneva
      4P1-01_Pascal Febvre_Room 1.pdf
      • 912
        4P1-01 Superconducting Computing: An Energy-Efficient Quantum-Based Technology For Supercomputers
        Speaker: Pascal Febvre (Université Savoie Mont Blanc)
    • Closing CICG Room 1

      CICG Room 1

      Geneva
Powered by Indico v3.3.7-pre