EUCAS 2017

17 Sept 2017, 08:00 → 21 Sept 2017, 22:00 Europe/Zurich

CICG (Geneva)

WELCOME TO GENEVA!

Welcome to the 13th biennial European Conference on Applied Superconductivity, EUCAS 2017, organized under the auspices of ESAS, the European Society for Applied Superconductivity.

17th – 21st September 2017

EUCAS 2017 will be held 17-21 September 2017 in the International Conference Centre of Geneva (CICG), hosted by CERN in collaboration with the University of Geneva and EPFL-SPC.

EUCAS is a worldwide forum for scientists and engineers, and provides an ideal platform to share knowledge and the most recent advances in all areas of applied superconductivity: from large-scale applications to miniature electronics devices, with a traditional focus on advanced materials and conductors. The broad scope is at the same time a challenge and an opportunity to foster novel, inter-disciplinary approaches and promote cross-fertilization among the various fields of applied superconductivity.

The Scientific Program Committee has taken up this challenge, and is devising a diverse and exciting program. In line with the tradition of conferences on applied superconductivity, and following the successful experience of EUCAS 2015 in Lyon, all papers presented at the conference are eligible for submission to a peer-reviewed special issue of IEEE Transaction on Applied Superconductivity.

We plan to complement the scientific program with an evening outreach event, whose highlight will be the public address of Fabiola Gianotti, CERN Director General.

The conference will be closed by an event of unique flavor, punctuated by historical landmarks of superconducting technology for accelerators that will take place in the large CERN Superconducting Magnet Test Facility complex, following a visit to some of the most significant CERN installations.

Geneva, located at the foot of the Alps and the Jura, on the banks of Lake Leman, at the border of Switzerland and France, has a long history of diversity and tolerance. It is the well-known seat of several International Organizations (among others the European headquarters of UN, WHO, WTO, UNHCR, ICRC, and CERN). But Geneva is also a unique city of culture, and the perfect home base for exploring wonderful surroundings in Switzerland and France (the Mont Blanc alpine slopes are less than an hour’s drive away). Participants to EUCAS 2017 will be able to find a wide range of hotels suitable for each need.

On behalf of the Local Organizers, the Program Committee, and the many volunteers who are helping to arrange for a world-class conference, we welcome you to Geneva in September 2017.

 

Sunday 17 September

08:30 → 17:00 Short Courses

08:30 Design of Superconducting magnets for particle accelerators and detectors

Design of Superconducting magnets for particle accelerators and detectors

08:30 High Temperature Superconductors: the path from the materials to the technical conductors

High Temperature Superconductors: the path from the materials to the technical conductors

08:30 RF Superconducting Cavities

RF Superconducting Cavities

08:30 Superconducting electronics - from Josephson effects to quantum computing

Superconducting electronics - from Josephson effects to quantum computing

08:30 Superconducting Power Devices

Superconducting Power Devices

14:00 → 18:00 Registration

15:00 → 17:30 ESAS Board

18:00 → 20:00 Welcome reception CICG

Exhibition Area

Monday 18 September

08:00 → 08:30 Welcome Address and Awards

Awards_1.pdf

Awards_2.pdf

Awards_3.pdf

08:30 → 08:50 ESAS Award & Talk

08:30 ESAS Award and Talk

Speaker: Ronny Stolz (Leibniz)

DeBeers_ExplorationTechniques_v10_20161205_2secshold.mp4

EUCAS2017_Stolz_v3.pdf

09:00 → 09:50 1P1 - Plenary 1

09:00 1P1-01 - Charge Density Waves in underdoped High-Tc materials

Speaker: Ted Forgan (University of Birmingham)

1P1-01_Ted Forgan_Room 1.pdf

09:50 → 10:15 Coffee Break

10:15 → 12:15 1E01

10:15 1EO1-01 Transport and noise properties of YBCO nanowire based nanoSQUIDs

Speaker: Thilo Bauch (Chalmers University of Technology)

1EO1-01_Thilo Bauch_Room 3+4.pdf

10:45 1EO1-02 3D nanoSQUID with an energy sensitivity of 1 h at 4.2 K

Speaker: Carmine Granata (National Research Council, Institute of Applied Sciences and Intelligent Systems)

1EO1-02 Granata Room 3+4.pdf

11:00 1EO1-03 SQUIDs with sub-micron Josephson junctions for ultra-low-field magnetic resonance imaging

Speaker: Juho Luomahaara (VTT Technical Research Centre of Finland)

1EO1-03_Juho Luomahaara_Room 3+4.pdf

11:15 1EO1-04 Large High-Temperature Superconducting 2D SQIF arrays

Speaker: Shane T Keenan (CSIRO)

11:30 1EO1-05 Scanning SQUID Microscopy for Sensing Vector Magnetic Field

Speaker: The Dang Vu (Department of Physics and electronics, Osaka Prefecture University)

1EO1-05_The Dang Vu_Room 3+4.pdf

11:45 1EO1-06 Flip-chip high-Tc DC SQUID magnetometer with a ferromagnetic flux antenna

Speaker: Michael Faley (Peter Grünberg Institute,)

1EO1-06_Michael Faley_Room 3+4_update.pdf

12:00 1EO1-07 Phase sensitive imaging of the currents in planar superconductive resonator

Speaker: Alexandre Karpov (National University of Science and Technology (MISIS))

10:15 → 12:15 1LO1 - FCL / SMEs

10:15 1LO1-01 Siemens’ first MV SFCL installed in a public grid – aspects from design to operation and operational experience

Speaker: Tabea Arndt (Siemens AG)

10:45 1LO1-02 Resistive superconducting fault current limiter for 220 kV Moscow grid

Speaker: Moyzykh Mikhail (S-Innovations)

1LO1-02_Mikhail Moyzykh_Room 1.pdf

11:00 1LO1-03 SmartCoil –Shielded Core Reactor for Current Limitation on the Distribution Level

Speaker: Kudymow Andrej (Karlsruhe Institute of Technology)

1LO1-03_Andrej Kudymow_Room 1.pdf

11:15 1LO1-05 The DRYSMES4GRID project: development of a cryogen free cooled SMES demonstrator based on MgB2

Speaker: Antonio Morandi (University of Bologna - DEI)

1LO1-05_Antonio Morandi_Room 1.pdf

11:30 1LO1-06 Development of round flexible HTS CORC® wires for fault current limiting applications

Speaker: Jeremy Weiss (Advanced Conductor Technologies)

1LO1-06_Jeremy Weiss_Room 1.pdf

11:45 1LO1-07 A new EC project: FASTGRID

Speaker: Pascal Tixador (Grenoble-INP)

1LO1-07_Pascal Tixador_Room 1.pdf

12:00 1LO1-

10:15 → 12:15 1MO1

10:15 1MO1-01 Universal Lower Limit on Vortex Creep in Superconductors

Speaker: Serena Eley (Serena Eley)

1MO1-01_Serena Eley_Room_2.pdf

10:45 1MO1-02 Self-field critical currents of practical superconductors

Speaker: Evegny Talantsev (Robinson Research Institure, Victoria University of Wellington)

1MO1-02_Evgeny Talantsev_Room 2_update.pdf

11:00 1MO1-03 Micro-straining tuning for strong and isotropic artificial pinning centers in YBCO films

Speaker: Judy Wu (University of Kansas)

1MO1-03_Judy Wu_Room 2.pdf

11:15 1MO1-04 Progress towards YBa2Cu3O7-δ nanocomposite thin films using chemical solution deposition and preformed nanocrystals

Speaker: Katrien De Keukeleere (Ghent University)

1MO1-04_Katrien De Keukeleere_Room 2.pdf

11:30 1MO1-05 High-field Jc properties of MOD-(Y,Gd)Ba2Cu3Oy coated conductors with BaHfO3 nanoparticles

Speaker: Tatsunori Okada (High Field Laboratory for Superconducting Materials, IMR, Tohoku University)

1MO1-05_Tatsunori Okada_Room 2.pdf

11:45 1MO1-06 The challenging pinning landscape of YBa2Cu3O7 thin films

Speaker: Bernart Mundet (Institut de Ciència de Materials de Barcelona)

1MO1-06_Bernat Mundet_Room 2.pdf

12:00 1MO1-07 High field superconducting characteristics at low temperature of SmBa2Cu3Ox coated conductor with artificial pinning center

Speaker: Yutaka Yoshida (Nagoya university)

1MO1-07_Yutaka Yoshida_Room_2.pdf

12:15 → 13:30 Lunch break

13:30 → 15:30 Poser : 1EP3 - Squids

13:30 1EP3-01 Ultrasound-Induced Magnetic Imaging of Tumors Targeted by Biofunctional Magnetic Nanoparticles

Speaker: Jen-Jie Chieh (National Taiwan Normal University)

13:31 1EP3-02 Rapid and quantitative discrimination of tumour cells on tissue slices

Speaker: Herng-Er Horng (National Taiwan Normal University)

13:32 1EP3-03 Investigation of geomagnetic orientation preserved in a stain containing iron compounds using a vector-type SQUID magnetometer

Speaker: Yoshiaki Adachi (Kanazawa Institute of Technology)

13:33 1EP3-04 Detection of Biological Targets Using HTS SQUID and Magnetic Markers

Speaker: Keiji Enpuku (Kyushu University)

13:34 1EP3-05 Ion implantation generation of normal/superconducting junctions for fabrication of all niobium SQUIDs

Speaker: Yanping Zhang (Sumitomo Heavy industries, Ltd.)

13:35 1EP3-06 Development of eddy current testing system using HTS-SQUID on a hand card for detection of fatigue cracks of steel plate used in highway roads

Speaker: Akira Tsukamoto (SUSTERA)

13:36 1EP3-07 Analysis of AC Impedance in Localized Region Using Magnetic Field Distribution Measured by HTS-SQUID

Speaker: Kenji Sakai (Okayama University)

13:37 1EP3-08 Ultra-sensitive SQUID system for pulsed field applications

Speaker: Rainer Körber (Physikalisch-Technische Bundesanstalt)

13:38 1EP3-10 Cryogenic Current Comparators for larger beamlines

Speaker: Paul Seidel (University of Jena)

13:39 1EP3-12 Adaptive suppression of power line interference in ultra-low field magnetic resonance imaging in an unshielded environment

Speaker: Quan Tao (Shanghai Institute of Microsystem and Information Technology (SIMIT),Chinese Academy of Sciences)

13:40 Low liquid helium consumption SQUID system with liquid nitrogen cooling interlayer for biomagnetism

Speaker: Li Lu (Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences)

13:41 1EP3-14 Detection of pressure-overloaded left ventricular hypertrophy based on current dipole estimation from magnetocardiograms of rats using HTS-SQUID system

Speaker: Yuto Tsukamoto (WASEDA University)

13:42 1EP3-15 The Study of Several System Key Parameters for the Measurement of Airborne Superconducting Full Tensor Magnetic Gradient

Speaker: Jun Wu (Shanghai Institute of Microsystem and Information Technology Chinese Academy of Sciences)

13:43 1EP3-16 Superconductive Resonator Configuration with Flux-Focuser as Ground Plane for RF-SQUID Magnetometer

Speaker: Fatemeh Qaderi (Sharif University of Technology)

13:44 1EP3-17 SQUID magnetometer system for high-sensitivity measurement of geomagnetic signals

Speaker: Jun Kawai (Applied Electronics Laboratory, Kanazawa Institute of Technology)

13:45 1EP3-18 Measurement of Magnetic Nanoparticles by Small HTS SQUID Array

Speaker: Saburo Tanaka (Toyohashi University of Technology)

13:46 1EP3-19 High-Tc SQUID detected low-field NMR and MRI for biomedical application

Speaker: Shu-Hsien Liao (National Taiwan Normal University)

13:47 1EP3-20 Development of a LTS-SQUID Based Airborne Full Tensor Gradiometers

Speaker: Longqing Qiu (Shanghai Institute of Microsystem And Information Technology, CAS)

13:48 1EP3-22 Cryptophane-Caged Xe-129 Relaxation Agent in Ultra-low Field NMR/MRI Based on High-Tc SQUID Detection

Speaker: Quan Tao (Forschungszentrum Jülich)

13:49 1EP3-23 High sensitivity analysis of the magnetization properties of magnetic nanoparticles changed by the viscosity of the water solution using HTS-SQUID

Speaker: Ryota Isshiki (Okayama University)

13:50 1EP3-24 Multipoint measurement of T (0, 1) mode guided wave using HTS-SQUID gradiometer

Speaker: Natsuki Masutani (Kindai University)

13:51 1EP3-25 Sensitivity improvement of sample rotation measurement method in HTS-SQUID magnetometer for measurement of diamagnetic materials

Speaker: Yuta Nakamura (Okayama University)

13:30 → 15:30 Poster : 1EP1 - Circuit Application & System

13:30 1EP1-01 Arrays of stacked SNS Josephson junctions for pulse-driven Josephson voltage standards

Speaker: Oliver Kieler (Physikalisch-Technische Bundesanstalt (PTB))

13:30 1EP1-03 A fast wire-routing method and an automatic layout tool for RSFQ digital circuits considering wire-length matching

Speaker: Nobutaka Kito (Chukyo University)

1EP1-03_Kito Nobutaka.pdf

13:31 1EP1-04 Logic Design of a 16-bit Bit-Slice Arithmetic Logic Unit for 32-/64-bit RSFQ Microprocessors

Speaker: Guang-Ming Tang (Institute of Computing Technology, Chinese Academy of Sciences)

13:32 1EP1-05 Die size requirements versus capability for SFQ SPGAs in multilayer fabrication processes

Speaker: Coenrad Fourie (Stellenbosch University)

13:33 1EP1-06 Microarchitectures for energy-efficient computing implemented in adiabatic quantum-flux-parametron logic

Speaker: Christopher Ayala (Institute of Advanced Sciences - Yokohama National University)

13:34 1EP1-07 Fabrication and Characterization of NbN-based Magnetic Josephson Junctions

Speaker: Li Feng (SIMIT)

13:35 1EP1-08 Superconducting And Cryogenic Environments For Quantum Technologies

Speaker: Ziad Melhem (Oxford Instruments)

13:36 1EP1-09 Superconducting and flexible multilayer high density interconnect

Speaker: Samuel d'Hollosy (Hightec MC AG)

1EP1-09_d'Hollosy Samuel.pdf

13:37 1EP1-10 Characterization of Frequency-Dependent Nonlinear Effects in Pulse-Bias Waveform Synthesis

Speaker: Christine Donnelly (NIST)

13:38 1EP1-11 Inductance Extraction of Superconducting Structures in the Presence of Magnetic Materials

Speaker: Kyle Jackman (Stellenbosch University, Department of Electrical and Electronic Engineering)

13:39 1EP1-12 Design and implementation of AQFP-based register files for an AQFP 4-bit RISC microprocessor prototype

Speaker: Qiuyun Xu (Yokohama National University)

13:40 1EP1-13 Charge-based superconducting digital logic family using quantum phase-slip junctions

Speaker: Uday Goteti (Auburn University)

1EP1-13_Goteti Uday.pdf

13:41 1EP1-14 Parallel Adders for Low-Pass Phase Modulation-Demodulation ADCs

Speaker: Timur Filippov (HYPRES)

13:42 1EP1-15 High-Resolution Characterization of Josephson Junctions and Magnetic Multilayers for Low-Power, Superconducting Logic and Memory Devices

Speaker: Nancy Missert (Sandia National Laboratories)

13:43 1EP1-16 Timing Characterization and Enabling Static Timing Analysis in Rapid Single Flux Quantum Circuits

Speaker: Massoud Pedram (University of Southern California, Department of Electrical Engineering, Los Angeles, CA, USA)

13:44 1EP1-17 Superconducting NbTi Flex Cables for High-Density Interconnects

Speaker: Robin Cantor (STAR Cryoelectronics)

13:30 → 15:30 Poster : 1EP2 - Detectors, sensors and other devices

13:30 1EP2-03 Characterizing Thick Electroplated Bismuth Films as Hard X-ray TES Absorbers

Speaker: Lisa Gades (Argonne National Laboratory)

13:31 1EP2-04 Influence of YBaCuO ultrathin film characteristics and front end features on HEB THz mixer performance

Speaker: Alain Kreisler (CentraleSupelec - GeePs)

13:32 1EP2-05 Hybrid superconducting mesa-structure with spin filtering manganite interlayer

Speaker: Kare'n Constantinian (Kotel’nikov Institute of Radio Engineering and Electronics of Russian Academy of Sciences)

13:33 1EP2-06 MgB2 films for superconducting detectors

Speaker: Sergey Cherednichenko (Chalmers University of Technology)

13:34 1EP2-08 Phase-Slip Events in MoRe-Si(W)-MoRe heterostructures

Speaker: Pascal Febvre (Université Savoie Mont Blanc)

13:35 1EP2-09 Frequency Response Characteristics Analysis of High Detectivity Backside Illuminated Free-Membrane Type IR Superconducting Bolometer

Speaker: Roya Mohajeri (Sharif University of Technology)

13:36 1EP2-10 The Characteristics of THz Metamaterials based on YBCO Superconductor

Speaker: Chiu-Hsien Wu (Department of Physics, National Chung Hsing University)

13:37 1EP2-11 Progress of pulse-driven AC Josephson voltage standards at PTB

Speaker: Johannes Kohlmann (PTB)

13:38 1EP2-12 High-temperature superconducting nano-meanders made by high energy ion irradiation

Speaker: Paul Amari (LPEM UMR 8213, ESPCI Paris)

13:39 1EP2-14 Transition Edge Sensors for Quench Localisation in SRF Cavity Testing

Speaker: Tobias Stegmaier (CERN)

13:40 1EP2-15 Development of transition edge sensors for the application in real-time multispectral-fluorescence-microscopy

Speaker: Katja Peiselt (Leibniz Insitut für Photonische Technologien)

1EP2-15_Peiselt Katja.pdf

13:41 1EP2-16 Superconducting noise bolometer with microwave bias and readout for terahertz array applications

Speaker: Artem Kuzmin (Karlsruhe Institute of Technology)

13:42 1EP2-17 Effects of thermal parameters and boundary resistances of MgO substrate on the response of YBCO transition edge bolometers

Speaker: Rana Nazifi Takantapeh (Sharif University of Technology)

13:43 1EP2-18 Design and Optimization of a Terahertz Metamaterial Absorber for YBCO Superconductive Transition Edge Bolometer

Speaker: Fatemeh Qaderi (Sharif University of Technology)

13:44 1EP2-19 Focused He+-Ion Beam High Temperature Superconducting narrow nanowires

Speaker: Cheryl Feuillet-Palma (ESPCI Paris - LPEM - UMR 8213)

13:45 1EP2-20 Self-Monitoring, "SMART" REBCO coated conductors

Speaker: Federico Scurti (North Carolina State University)

13:46 1EP2-21 Proximity induced superconducting properties in high mobility two-dimensional electron gas quantum well in In0.75Ga0.25As heterostructures

Speaker: Kaveh Delfanazari (Centre for Advanced Photonics and Electronics, University of Cambridge)

13:47 1EP2-22 Noise temperature characterisations of YBCO step-edge junction terahertz mixer operating at temperatures above 40 K

Speaker: Jia Du (Research Scientist CSIRO Manufacturing)

13:30 → 15:30 Poster : 1LP1 - Cables for accelerator magnets

13:30 1LP1-01 3D shape and cross sectional inhomogeneity of Nb3Sn superconducting wires in Rutherford cables

Speaker: Christian Scheuerlein (Fraunhofer Institute for Industrial Mathematics (ITWM), Kaiserslautern, Germany and University of Kaiserslautern (TUK), Kaiserslautern, Germany)

13:31 1LP1-03 Critical Current Measurements of Nb3Sn Rutherford Cables under Transverse Pressure

Speaker: Jean-Eudes Duvauchelle (CERN)

13:32 1LP1-04 Characterization of Nb3Sn Rutherford cable degradation due to strand cross over

Speaker: Jerome Fleiter (CERN)

13:33 1LP1-05 Study on the Nb3Sn Rutherford Cable for High-Energy Accelerators

Speaker: Yanmin Zhu (Western Superconducting Technologies Co., Ltd)

13:34 1LP1-06 Sheared Subelement Length in MQXF Cables made from RRP(R) Strands

Speaker: Ian Pong (Berkeley Lab)

13:35 1LP1-07 Two-layers Rutherford Cable – Possible Solution for High Field Superconducting Magnet

Speaker: Vitaly Vysotsky (Russian Scientific R&D Cable Institute)

13:36 1LP1-08 Thermal analysis of a superconducting bus-bar for SIS100 particle accelerator at FAIR

Speaker: Lukasz Tomkow (Lukasz Tomkow)

1LP1-08_Tomkow Lukasz.pdf

13:37 1LP1-10 Phased Array Ultra Sounds Non Destructive Tests of Soldered Current-Carrying Bus-Bar Splices of Superconducting Magnets

Speaker: Rosario Principe (CERN)

13:38 1LP1-11 Comparison of mechanical concepts for Nb3Sn high field accelerator magnets

Speaker: Mr Christian Löffler (CERN)

Comparison of mechanical concepts for Nb3Sn high field accelerator magnets-POSTER.pdf

13:30 → 15:30 Poster : 1LP2 - High field, NMR magnets and cables

13:30 1LP2-02 In-house Industrial Assembly of the Superconducting Conductor for the 43 T Hybrid Magnet at LNCMI-Grenoble

Speaker: Pierre Pugnat (CNRS/LNCMI-Grenoble)

1LP2-02_Pugnat Pierre.pdf

13:31 1LP2-03 Engineering Of New Class Of High Field Magnets For Research Application

Speaker: Ziad Melhem (Oxford Instruments)

13:32 1LP2-04 Shimming and Regulating a 36-T Hybrid Magnet for High Resolution NMR

Speaker: William Brey (Florida State University - NHMFL)

13:33 1LP2-05 Development of 400 MHz Cryogen Free Magnets for MAS Solid State NMR Spectroscopy

Speaker: Jeremy Good (Cryogenic Ltd)

13:34 1LP2-07 Conduction cooling system for a 400 MHz HTS NMR magnet

Speaker: Sehwan In (Korea Institute of Machinery and Materials)

13:35 1LP2-08 Design of a superconducting sensing structure with SQUIDs for sensitive gravity measurement

Speaker: Xinning Hu (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:36 1LP2-09 A Superconducting Magnet System for Animal Imaging System

Speaker: Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:37 1LP2-10 Recent development of the 25 T all-superconducting NMR magnet at IEE

Speaker: Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:30 → 15:30 Poster : 1LP3 - AC losses

13:30 1LP3-01 Inter-strand resistance in REBCO Roebel cables and effect on AC loss

Speaker: Simon Otten (Karlsruhe Institute of Technology)

13:31 1LP3-03 Ac loss calculation of a cosine-theta dipole magnet wound with coated conductors considering iron yoke influence

Speaker: Yusuke Sogabe (Kyoto University)

1LP3-03_Sogabe Yusuke.pdf

13:32 1LP3-04 AC loss in REBCO stator windings of superconducting motors for electric and hybrid aircrafts

Speaker: Enric Pardo (Institute of Electrical Engineering, SAS)

1LP3-04_Pardo Enric.pdf

13:33 1LP3-05 Simulations of electromagnetic behaviors of joint in YBCO coated conductors with 3D finite-element analysis

Speaker: Huadong Yong (Lanzhou University)

13:34 1LP3-06 Influence of Three Phases Imbalance on the AC Losses of Tri-axial HTS CORC Cable used in an All-Electric Aircraft

Speaker: Zixuan Zhu (University of Bath)

13:35 1LP3-07 Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft

Speaker: Yawei Wang (University of Bath)

13:36 1LP3-08 Quench propagation in Rutherford MgB2 cables

Speaker: Álvaro Cubero (Instituto de Ciencia de Materiales de Aragón (ICMA), CSIC – Universidad de Zaragoza)

1LP3-08_Cubero Álvaro.pdf

13:37 1LP3-09 Calculation of interstrand coupling losses in superconducting Rutherford cables with a continuum model

Speaker: Marco Breschi (University of Bologna)

13:38 1LP3-11 Dynamic resistance measurement in a four-tape YBCO stack

Speaker: Zhenan Jiang (Victoria University of Wellington)

1LP3-11_Jiang Zhenan.pdf

13:39 1LP3-12 Analysis of AC loss in different stacks of YBCO superconducting tapes

Speaker: Changxin Chi (Shanghai University/Shanghai Key Laboratory of High Temperature Superconductors)

13:40 1LP3-13 AC Losses in HTS Coils for Wireless Power Transfer Applications

Speaker: Boyang Shen (University of Cambridge)

13:41 1LP3-14 Simulation of linear generator made of HTS pancake coils stack

Speaker: Sukru Yildiz (Ahi Evran University)

13:42 1LP3-15 Measurements of crossed-field demagnetisation rate of trapped field magnets at 20-77 K and high frequencies

Speaker: Algirdas Baskys (University of Cambridge)

13:43 1LP3-17 Dragging hysteresis forces in a linear displacer with Coated Conductor Stacks

Speaker: José López (Physics Departament, UPC Barcelona Tech)

1LP3-17_López José.pdf

13:44 1LP3-18 Magnetization of rectangular 2G HTS stacks and dragging forces developed inside a multipolar magnetic channel: trapped field, current distribution and forces

Speaker: Miquel Carrera (Institut de Ciència de Materials de Barcelona, ICMAB-CSIC)

1LP3-18_Carrera Miquel.pdf

13:45 1LP3-20 AC loss in HTS fusion cables: measurements, modeling and scaling laws

Speaker: Nikolay Bykovsky (EPFL Swiss Plasma Center)

1LP3-20_Bykovsky Nikolay.pdf

13:46 1LP3-21 Multi-scale Model for AC Loss Calculation in Large-scale HTS-SMES

Speaker: Ying Xu (Huazhong University of Science and Technology)

1LP3-21_Xu Ying.pdf

13:47 1LP3-22 Effect of striation in assembled coated conductors

Speaker: Naoyuki Amemiya (Kyoto University)

13:48 1LP3-23 Transport AC loss measurements in bifilar stacks composed of YBCO coated conductors

Speaker: Wenjuan Song (Beijing Jiaotong University, China; Victoria University of Wellington, New Zealand)

1LP3-23_Song Wenjuan.pdf

13:30 → 15:30 Poster : 1LP4 - Levitation, transportation and propulsion

13:30 1LP4-01 The measurement and modeling of the levitation force between single grain YBCO bulk superconductors and permanent magnets

Speaker: Antonio Morandi (University of Bologna - DEI)

13:31 1LP4-02 Comparative analysis of the specific characteristics of the magnetic bearings with HTS elements

Speaker: Ekaterina Kurbatova (National Research University "Moscow Power Engineering Institute")

1LP4-02_Kurbatova Ekaterina.pdf

13:32 1LP4-04 Bulk superconductor levitation devices: Advances in and prospects for development

Speaker: Uta Floegel-Delor (Adelwitz Technologiezentrum GmbH (ATZ))

13:33 1LP4-05 Increase of levitation properties owing to high magnetic field in magnetic levitation system with magnetic shielding effect of HTS bulks

Speaker: Naohiro Negishi (Sophia University)

13:34 1LP4-06 Thermal characteristics of a 400mm diameter levitating rotor in a superconducting magnetic bearing operating below at 10K for a CMB polarization experiment

Speaker: Yuki Sakurai (Kavli IPMU (WPI), UTIAS, The University of Tokyo)

13:35 1LP4-07 Simulation of magnetization and heating processes in HTS tapes stacks

Speaker: Irina Anishchenko (National Research Nuclear University MEPhI)

1LP4-07_Anishchenko Irina.pdf

13:36 1LP4-08 Prototype of a Rings based zero-field-cooled (ZFC) YBCO magnetic bearing

Speaker: António Arsénio (IDMEC, Instituto Superior Técnico, Universidade de Lisboa)

1LP4-08_Arsénio António.pdf

13:37 1LP4-09 Fabrications and Cooling Tests on Conduction Cooled HTS Coils with Heat Pipes

Speaker: Jun Tokushige (Kagoshima University)

13:38 1LP4-10 Influence of magnetic field configuration on levitation force for HTS tapes stack

Speaker: Dmitry Abin (National Research Nuclear University MEPhI)

13:39 1LP4-12 The levitation force of CC-tapes stack at different temperatures.

Speaker: Maxim Osipov (National Research Nuclear University MEPhI)

1LP4-12_Osipov Maxim.pdf

13:40 1LP4-13 Effect of Anisotropic Magnetization of HTS Bulk superconductors with Different Shapes on Suspension Rotational Loss

Speaker: Wenjiang Yang (Beihang University)

13:41 1LP4-15 High-Tc Superconducting Maglev Prototype Vehicle Running at a 160 km/h in an Evacuated Circular Test Track

Speaker: Yong Zhao (Southwest Jiaotong University)

1LP4-15_Zhao Yong.pdf

13:30 → 15:30 Poster : 1LP5 - Motors, generators and other rotating machines

13:30 1LP5-03 Electrical Losses and Temperature Distribution Analysis of a HTS Motor Considering PWM Schemes in Voltage Source Inverter

Speaker: Ji Hyung Kim (Dept. of Electrical Engineering, Jeju National University)

13:31 1LP5-04 Numerical Analyses on Influences of Armature Winding Shape and Yoke Arrangements on Total Losses in Fully Superconducting Synchronous Motors Using REBCO Tapes

Speaker: Akifumi Kawagoe (Kagoshima University)

13:32 1LP5-05 Comparative Characteristics of Rotary HTS Flux-pump considering Rotational State of HTS Load

Speaker: Jeyull Lee (Yonsei University)

13:33 1LP5-06 Design of a DC Transformer by an HTS Homopolar Motor-Generator Set

Speaker: Seyon Lee (Korea Polytechnic University)

13:34 1LP5-08 Experiments and Modelling of a Synchronous-Hysteresis Superconducting Machine with Stacks of Second Generation Tapes

Speaker: Guilherme Goncalves Sotelo (Universidade Federal Fluminense)

1LP5-08_Goncalves Sotelo Guilherme.pdf

13:35 1LP5-09 Superconductors under dynamic electromagnetic conditions in electric machines

Speaker: Peter O'Brien (Queensland University of Technology)

1LP5-09_O'Brien Peter.pdf

13:36 1LP5-10 Reduction and elimination of ac-losses in the superconducting super motor

Speaker: Minaru Kawamura (Okayama University of Science)

13:37 1LP5-12 Fabrication of a scaled MgB2 racetrack demonstrator pole for a 10 MW direct drive wind turbine generator

Speaker: Niklas Magnusson (SINTEF Energy Research)

1LP5-12_Magnusson Niklas.pdf

13:38 1LP5-13 A Novel Axial-Flux Magnetic Gear Using Stationary HTS Excitation

Speaker: Peng Gao (China University of Petroleum)

13:39 1LP5-14 Test of a Rotary HTS Flux-pump using Electromagnet for Constant Field Current of HTS Synchronous machine

Speaker: Haeryong Jeon (Yonsei University)

13:40 1LP5-15 Study on the optimal arrangement according to the purpose of superconducting bulk.

Speaker: Kazuhito Yamagishi (Yokohama National University)

13:41 1LP5-16 Relationship between Eccentricity and Amplitude of a Rotor Having a Non-uniform Magnetization Distribution Supported by a Superconducting Magnetic Bearing

Speaker: Hirotaka Ishii (Graduate School of Science and Technology Keio University)

13:42 1LP5-19 3D Modeling of Coils for Pulsed Field Magnetization of HTS Bulk Pellets Placed on an Inductor of a Superconducting Electrical Machine

Speaker: Kévin Berger (GREEN - University of Lorraine)

13:43 1LP5-20 Characterization of oriented and non-oriented electrical steels using the Epstein frame and a magnetic core, at room and cryogenic temperatures

Speaker: Anabela Pronto (UNINOVA-Centro de Tecnologia e Sistemas)

13:44 1LP5-21 Lorentz Force Velocimetry based on HTS bulk magnet system

Speaker: Oleksii Vakaliuk (Technische Universität Ilmenau)

13:30 → 15:30 Poster : 1LP6 - Transformers, SMES and fault current limiters

13:30 1LP6-01 Current limiting cooperation of superconducting transformers and cables

Speaker: Takayuki Tokuchi (Kyushu University)

13:31 1LP6-02 Fault tolerant HTS transformers: increasing the fault withstand time and recovery current

Speaker: Mike Staines (Robinson Research Institute, Victoria University of Wellington)

1LP6-02_Yazdani Asrami Mohammad.pdf

13:32 1LP6-03 Hybrid HTS-copper transformer of large turn-to-turn ratio

Speaker: Mariusz Stepien (Silesian University of Technology)

13:33 1LP6-04 The proposal of contact cooling system for superconducting transformer winding made of parallel tapes with transpositioners

Speaker: Beata Kondratowicz-Kucewicz (Electrotechnical Institute)

13:34 1LP6-05 Proposal to substitute Roebel cable with parallel tapes with clusters of transpositioners in modular construction of superconducting transformer windings

Speaker: Grzegorz Wojtasiewicz (Electrotechnical Institute)

13:35 1LP6-06 Considerations of HTS 2G superconducting transformer temperature during short circuit

Speaker: Grzegorz Wojtasiewicz (Electrotechnical Institute)

13:36 1LP6-07 The new concept of using the superconducting transformers in low and medium voltage distribution network

Speaker: Slawomir Kozak (Electrotechnical Institute)

13:37 1LP6-08 Optimization and analysis of a spherical 3-phase transformer having 2G HTS windings

Speaker: Paweł Lasek (Silesian University of Technology, Falculty of Electrical Engineering)

13:38 1LP6-13 Enhancing Fault Ride Through Capability and Transient Stability of DFIG with SMES-FCL

Speaker: Zixuan Zheng (Sichuan University)

13:39 1LP6-14 Application of Superconducting Magnetic Energy Storage for Stabilizing the Grid Integrated with Wind Power Generation Systems - A Review

Speaker: Vutukuru Vasudeva Rao (Indian Institute of Technology KHARAGPUR)

13:40 1LP6-15 Modeling and analysis of superconducting fault current limiter for system integration of battery banks

Speaker: Doaa M. Yehia (Tanta University)

13:41 1LP6-16 Improving Voltage Stability in DC Distribution Systems Using Small Scale Superconducting Magnetic Energy Storage

Speaker: Doaa M. Yehia (Tanta University)

13:42 1LP6-18 Design of a Medium Voltage Superconducting Series Reactor for a Grid-Connected Power Engineering Research Site

Speaker: Mohamed Fayaz Khan (University of KwaZulu Natal)

1LP6-18_Khan Mohamed Fayaz.pdf

13:43 1LP6-19 Superconducting Power Filter for DC Electrical Grids

Speaker: Loïc Queval (GeePs, CentraleSupélec, Univ. Paris-Saclay)

13:44 1LP6-20 Effective Grid Integration of Superconducting Magnetic Energy Storage Using Current-Fed Z-Source Converter

Speaker: Diaa-Eldin A. Mansour (Tanta University)

13:30 → 15:30 Poster : 1LP7 - FCL : design and devices

13:30 1LP7-01 Comparison of shell vs. core-type magnetic circuits in the performance of inductive superconducting fault current limiters under asymmetric faults

Speaker: Joao Murta-Pina (Centre of Technology and Systems (Uninova))

13:31 1LP7-02 Analysis of the effects of different types of faults in three-phase saturated cores SFCL

Speaker: Nuno Vilhena (FCT / UNL)

13:32 1LP7-03 Peak Current Limiting Characteristics of Transformer Type SFCL with Two Non-Isolated Secondary Windings

Speaker: Tae-Hee Han (Jungwon University)

13:33 1LP7-04 SFCL cooling characteristics according to the control variables

Speaker: Hankil Yeom (KIMM)

13:34 1LP7-06 Comparison of dual peak current limiting with current source location of a series-connected SFCL using two iron cores

Speaker: Seok-Cheol Ko (Kongju National University)

13:35 1LP7-07 Volume Effect of Dynamic Breakdown Strength in LN2 for Insulation Design of Resistive Superconducting Fault Current Limiters

Speaker: Naoki Hayakawa (Nagoya University)

13:36 1LP7-08 Magnetizing Characteristics of a Flux-Lock-Type SFCL with Two Magnetic Paths Using Its Third Winding

Speaker: Sung-Hun Lim (Soongsil University)

13:37 1LP7-09 Engineering design and test of low-resistance high temperature superconducting short-circuited coils

Speaker: Joao Murta-Pina (Centre of Technology and Systems (Uninova))

13:38 1LP7-10 Improvement of recovery characteristics of resistive SFCL made by GdBCO tape with several surface conditions under pressurized condition

Speaker: Satoshi Takaya (Kyoto University)

1LP7-10_Takaya Satoshi.pdf

13:39 1LP7-11 Increase of the normal resistivity of REBCO tapes for 320 kV superconducting fault current limiters

Speaker: Guillaume Escamez (NEXANS/SuperGRID)

13:40 1LP7-12 Winding Design and AC Loss Analysis of a 10-kV / 500-A Flux-coupling type Superconducting Fault Current Limiter

Speaker: Sinian Yan (State Key Laboratory of Advanced Electromagnetic Engineering and Technology,Huazhong University of Science and Technology)

1LP7-12_Yan Sinian.pdf

13:41 1LP7-13 Magnetizing Characteristics of Transformer Type SFCL with Additional Secondary Winding Due to Its Winding Direction

Speaker: Shin-Won Lee (Jungwon University)

13:42 1LP7-14 Measurements of electromechanical forces in superconducting fault current limiters tapes under short circuit conditions

Speaker: Anabela Pronto (UNINOVA-CTS)

13:43 1LP7-15 A Design Methodology for Optimisation of three-phase SFCL of Saturated Cores Type

Speaker: Nuno Vilhena (FCT / UNL)

13:44 1LP7-16 Operation of a SCFCL at 65 K

Speaker: Pascal Tixador (Grenoble INP)

13:45 1LP7-17 Research on the Magnetic Property of Saturated Iron-core Superconducting Fault Current Limiter

Speaker: Chi Zhang (Huazhong University of Science and Technology)

1LP7-17_Zhang Chi.pdf

13:46 1LP7-18 Experiment and design of new type DC superconducting fault current limiter

Speaker: Chaoqun Zhao (Tianjin University)

13:47 1LP7-19 Design, building and test of a 220V/300A braid type superconducting fault current limiter

Speaker: Fei Liang (Bath University)

13:48 1LP7-20 Experiments on a new type of DC superconducting fault current limiter

Speaker: Ying Xin (Tianjin University)

13:49 1LP7-21 HTS Power devices with low cryo-consumption for current conditioning, switching and limiting

Speaker: Alexander Usoskin (Bruker HTS GmbH)

1LP7-21_Usoskin Alexander.pdf

13:50 1LP7-22 Short-Circuit Current Limitation Through 2G YBCO Resistive-Type SFCL Devices: Technical and Economic Comparison with Traditional Air-Core Reactors

Speaker: Giuliano Angeli (Ricerca sul Sistema Energetico - RSE S.p.A.)

1LP7-22_Angeli Giuliano.pdf

13:51 1LP7-23 Experimental tests and analysis of a small-scale Noval Hybrid Type DC SFCL Prototype

Speaker: Siyuan Liang (School of electrical and electronic engineering, Huazhong University of Science and Technology; State Key Laboratory of Advanced Electromagnetic Engineering and Technology)

1LP7-23_Liang Siyuan.pdf

13:52 1LP7-24 Preliminary Investigation on Economic Aspects of Superconducting Magnetic Energy Storage (SMES) Systems and High Temperature Superconducting Transformers (HTST)

Speaker: Weijia Yuan (Florida State University Center for Advanced Power Systems)

13:30 → 15:30 Poster : 1MP1 - Strain and Irradiation

13:30 1MP1-01 Microstructure and mechanical properties of high manganese steel processed by cold working and aging at 4.2K

Speaker: Yi Shi (Institute of Plasma Physics)

1MP1-01_Jin Huan_SHI.pdf

13:31 1MP1-02 Effects of rolling deformation on the critical current under transverse stress of PIT Nb3Sn wires

Speaker: Luc Gamperle (University of Geneva, Departement of Quantum Matter Physics)

13:32 1MP1-03 X-ray Stress Measurement of CrN coated Practical Nb3Sn Superconducting Wire

Speaker: Shutaro Machiya (Daido University)

13:33 1MP1-04 Characterization of irreversible degradation of Nb3Sn Rutherford cables due to transversal compression stress at room temperature

Speaker: Patrick Ebermann (CERN)

1MP1-04_Patrick Ebermann.pdf

13:34 1MP1-05 Axial tensile stress-strain characteristics of WST high Jc Nb3Sn strands

Speaker: Huajun Liu (Institute of Plasma Physics, Chinese Academy of Sciences)

13:35 1MP1-06 E-WASP, a facility to test strain, temperature, magnetic field and current effects on superconducting samples

Speaker: Luigi Muzzi (ICAS S.C.r.l.)

1MP1-06_Quagliata Tamisari Federico.pdf

13:36 1MP1-07 Prediction of Strain Degradation in Superconducting Accelerator Magnets Nb3Sn Coils Using Exponential Scaling Laws

Speaker: Giorgio Vallone (CERN)

1MP1-07_Vallone Giorgio.pdf

13:37 1MP1-09 Influence of the microstructure on the pinning force scaling behavior of Nb3Sn wires

Speaker: Thomas Baumgartner (TU Wien, Atominstitut)

1MP1-09_Baumgartner Thomas.pdf

13:38 1MP1-10 Fast neutron irradiation on K doped Ba-122 Single Crystals

Speaker: Daniel Kagerbauer (TU Wien, Atominstitut)

1MP1-10_Kagerbauer Daniel.pdf

13:39 1MP1-11 Effects of proton irradiation on the vortex dynamics of Fe(Se,Te) thin films

Speaker: Valeria Braccini (CNR-SPIN)

13:40 1MP1-12 Numerical simulation of die compaction of Mg and B powder mixture using pressure-dependent constitutive model

Speaker: Young-Seok Oh (Korea Institute of Materials Science)

13:41 1MP1-13 Improvement of the tensile and bending stress tolerance on MgB2 wire made by In-situ method

Speaker: Hideki Tanaka (Hitachi)

1MP1-13_Tanaka Hideki.pdf

13:30 → 15:30 Poster : 1MP2 - Cuprate Thin Films 1/2

13:30 1MP2-01 Vortex pinning study on epitaxial YBa2Cu3O7-x thin film grown on decorated MgO(001) single crystal substrates with La0.66Sr0.33MnO3 nano-islands

Speaker: Traian Petrisor Jr. (Technical University of Cluj-Napoca)

13:31 1MP2-02 Ink-jet printing of low-fluorine YBCO nanocomposite thin films with preformed HfO2 nanocrystals

Speaker: Hannes Rijckaert (Ghent University)

13:32 1MP2-03 Double-sided inkjet printed YBCO films on CZO/YSZ buffered sapphire substrates

Speaker: Roxana Vlad (Oxolutia SL)

13:33 1MP2-05 Effects of Zr Doping on Magnetic and Structural Properties of DyBa2Cu3O7-d Thin Films

Speaker: Yuri Aparecido Opata (DTU Energy - Technical University of Denmark)

13:34 1MP2-06 TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy films on CeO2 buffered R-Al2O3 substrates

Speaker: Keita Sakuma (Seikei University)

13:35 1MP2-07 Microwave-assisted YBCO precursors: A fast and reliable method towards chemical precursors for superconducting thin films

Speaker: Hannes Rijckaert (Ghent University)

13:36 1MP2-08 Preparation of YBa2Cu3O7-δ and (La0.85Sr0.15)2CuO4 multilayered structure for superconducting connection

Speaker: Yuhei Shimizu (National Institute of Advanced Industrial Science and Technology)

13:37 1MP2-09 Preparation of YBa2Cu3O7 - BaMO (M=Zr, Hf) superconductor nanocomposite using colloidal solution with preformed nanoparticles

Speaker: Ziliang Li (Institut de Ciència de Materials de Barcelona, CSIC)

13:38 1MP2-10 The influence of seed layer on the structure and superconducting property of BaHfO3 doped Y0.5Gd0.5Ba2Cu3O7-δ film prepared by pulsed laser deposition

Speaker: Linfei Liu (Shanghai Jiao Tong University)

1MP2-10_Liu Linfei.pdf

13:39 1MP2-12 The phase stability diagram of GdBa2Cu3O7-δ for the nominal composition and refinement of oxide inclusion in GdBCO films in low oxygen pressures

Speaker: Insung Park (Department of Material Science and Engineering, Research Institute of Advanced Materials (RIAM), Seoul National University, Korea)

13:40 1MP2-13 Synthesis and characterization of Y(1-x)NdxBa2Cu3O7-δ High Temperature Superconductors by Acetate Method

Speaker: Marcelo Neves (Uerj)

1MP2-13_Silva Ana Carolina.pdf

13:41 1MP2-14 High growth rate of YBCO films by Transient Liquid Assisted Growth by oxygen partial pressure control

Speaker: Silvia Rasi (Universitat de Girona)

13:42 1MP2-15 Impact of Humidity and the Additive 2,4-Pentanedione during the Pyrolysis of Gd0.5Y0.5Ba2Cu3O7-x Superconductors Prepared by Chemical Solution Deposition

Speaker: Carl Buehler (Karlsruhe Institute of Technology)

13:43 1MP2-16 Role of Oxygen exchange kinetics in the engineering of carrier concentration of YBa2Cu3O7-δ films

Speaker: Alexander Stangl (ICMAB-CSIC)

13:44 1MP2-17 Effect of oxygen partial pressure during annealing process on the epitaxy of LZO buffer layer for coated conductors

Speaker: Ping Ji (Northwest Institute for Nonferrous Metal Research, Xi’an 710016, P. R. China)

13:30 → 15:30 Poster : 1MP3 - Measurement Techniques 1/2

13:30 1MP3-02 Experimental and numerical investigation of shielding performances of superconducting shields using CC tapes

Speaker: Yoh Nagasaki (GeoCosmo Science and Research Center)

13:31 1MP3-03 Exploitation-generated changes in the resistance-temperature characteristics of the coal resistors (TVO)

Speaker: Kamil Kozłowski (Joint Institute for Nuclear Research)

1MP3-03_Kozłowski.pdf

13:32 1MP3-04 Selecting FBG coatings for optical fiber sensing of Quench in high temperature superconductor

Speaker: Yanchao Liu (Beijing Jiaotong university)

1MP3-04_Liu Yanchao.pdf

13:33 1MP3-05 Efficient cooling for electric current transport stability in superconducting materials

Speaker: Francesco Avitabile (Dipartimento di Fisica, Università degli Studi di Salerno)

13:34 1MP3-07 Determination of the complete penetration magnetic field of a HTS pellet from the measurements of the magnetic field at its top-center surface

Speaker: Bruno Douine (UBO)

13:35 1MP3-08 Comparison of magnetizing characteristics of superconducting bulk magnet cooled by Stirling and GM refrigerators during pulsed field magnetization

Speaker: Kazuya Yokoyama (Ashikaga Institute of Technology)

1MP3-08_Yokoyama Kazuya.pdf

13:36 1MP3-11 High resolution imaging of magnetic flux distributions in superconductors with scanning x-ray microscopy at low temperatures

Speaker: Stephen Ruoß (Max-Planck-Institute for Intelligent Systems Stuttgart)

1MP3-11_Ruoß Stephen.pdf

13:37 1MP3-12 Development of Image Analysis Techniques for Quantitative Microscopy on Superconducting Materials

Speaker: Peter Lee (Applied Superconductivity Center, NHMFL, FSU)

13:38 1MP3-13 Correlating magnetic flux distributions with superconductor microstructure using magnetic force microscopy

Speaker: Josef Hazi (Oxford University)

13:30 → 15:30 Poster : 1MP4 - Flux Pinning Non-Cuprates

13:30 1MP4-01 Correlation of the microstructure and magnetic properties of neutron irradiated Nb3Sn superconductors

Speaker: Stephan Pfeiffer (TU Wien)

1MP4-01_Pfeiffer Stephan.pdf

13:31 1MP4-02 High performance MgB2 bulks using carbon-coated amorphous boron and silver addition

Speaker: Masaki Higuchi (Shibaura Institute of Technology)

13:32 1MP4-03 Experimental evaluation for characteristics of MgB2 Rutherford cables with a large current capacity

Speaker: Sora Mizuochi (Sophia University)

13:33 1MP4-04 Flux pinning by InAs nanorods in Nb

Speaker: Dong Ho Kim (Yeungnam University)

1MP4-04_Kim Dong Ho.pdf

13:34 1MP4-06 Local probing of superconducting condensate

Speaker: Ritika Panghotra (KU Leuven)

13:35 1MP4-08 Anisotropy Effects on the Quenching Current of FeSeTe Thin Films

Speaker: Antonio Leo (Department of Physics "E. R. Caianiello", University of Salerno, and CNR-SPIN, Salerno)

13:36 1MP4-09 Analysis of flux pinning forces in bulk superconductors for applications

Speaker: Michael Koblischka (Saarland University)

13:37 1MP4-10 Enhanced critical current density in bulk MgB2

Speaker: Miryala Muralidhar (Shibaura Institute of Technology)

13:30 → 15:30 Poster : 1MP5 - Magnetization and Trapped Field + AC Losses 1/2

13:30 1MP5-01 Magnetic study of the low temperature anomalies in the optimally doped PrBCO compound

Speaker: Mahieddine Lahoubi (Badji-Mokhtar Annaba University, Faculty of Sciences,)

13:31 1MP5-02 Electromagnetic field analysis of a twisted superconducting strip with sweeping magnetic field

Speaker: Yoichi Higashi (National Institute of Advanced Industrial Science and Technology)

13:32 1MP5-04 Magnetic Measurements of the Critical Current Density in HTS Tapes in the Field Range up to 30T with self-field corrections.

Speaker: Andrew Smith (University of Durham)

1MP5-04_Smith Andrew.pdf

13:33 1MP5-05 Accurate Loss Estimation of Coated Conductors in External Magnetic Fields: Dynamic Loss and Magnetisation Loss

Speaker: Quan Li (University of Edinburgh)

13:34 1MP5-06 Magnetization of YBCO film with ac travelling magnetic waves of relatively short wavelengths

Speaker: Wei Wang (No.24 South Section 1, Yihuan Road)

13:35 1MP5-07 Magnetization Loss Characteristics of a Pancake Coil Fabricated by GdBCO Tape in kHz Frequency Band

Speaker: Ryota Inoue (Tohoku University)

13:36 1MP5-08 Theoretical evaluation of the screening-current-induced field in HTS coils with tape wires

Speaker: Yasunori Mawatari (National Institute of Advanced Industrial Science and Technology (AIST))

13:37 1MP5-09 AC Loss Analysis of High Temperature Superconducting Conductors on Round Core

Speaker: Seyeon Lee (Korea Polytechnic University)

1MP5-09_Choi Kyeongdal.pdf

13:38 1MP5-10 Measurements and numerical modelling of magnetization loops in two level undercut-profile substrate-based filamentary coated conductors

Speaker: Andrea Insinga (Technical University of Denmark)

13:39 1MP5-11 Magnetization AC losses in flat Al sheated MgB2 cables

Speaker: Ján Kováč (Institute of Electrical Engineering Slovak Academy of Science)

13:40 1MP5-12 Magnetization profiles of AC type-II superconducting wires subject to constant sources of magnetic field

Speaker: Harold Steven Ruiz (University of Leicester)

13:41 1MP5-14 Electromagnetic response of DC type-II superconducting wires under oscillating magnetic excitations

Speaker: Bright Chimezie Robert (University of Leicester)

13:42 1MP5-15 Numerical Analysis of AC Losses in YBCO Conductors Carrying AC Transport Current with Defect under AC Magnetic Field

Speaker: Wei Chen (Southwest Jiaotong University)

1MP5-15_Chen Wei.pdf

13:30 → 15:30 Poster : 1MP6 - MgB2 1/2

13:30 1MP6-01 Magnetic Microscopy for Nondestructive Characterization of Local Critical Current Distribution in Multi-filamentary MgB2 Wires with Magnetic Sheath Materials

Speaker: Shuhei Bochi (Kyushu University)

1MP6-01_Bochi Shuhei.pdf

13:31 1MP6-03 Achievements of high pressure MgB2 synthesis: can in situ samples reach mass density and grain connectivity of Mg diffusion samples?

Speaker: Tomasz Cetner (Institute of High Pressure Physics PAS)

13:32 1MP6-04 Effect of sintering conditions on modified IMD wire deformed by hydroextrusion

Speaker: Miloslav Kulich (Institute of Electrical Engineering)

13:33 1MP6-05 Aging of commercial MgB2 wires in liquid hydrogen

Speaker: Wilfried Goldacker (Karlsruhe Institute of Technology)

13:34 1MP6-06 Development and characterization of a multifilamentary MgB2 superconducting wire

Speaker: Durval Rodrigues Jr (Escola de Engenharia de Lorena - Universidade de São Paulo)

1MP6-06_Da Silva Lucas Barboza Sarno.pdf

13:35 1MP6-07 Effect of Bi mixing routes on MgB2 superconductors

Speaker: Kookchae Chung (Korea Institute of Materials Science)

13:36 1MP6-08 The Effect of Bi-2212 Addition on The Superconducting Properties of Bulk MgB2 Samples

Speaker: Meryem Alp (Ankara University)

13:37 1MP6-09 Magneto-optical, microstructural and magnetization measurements of in situ Fe/MgB2 conductors made from ball-milled precursor

Speaker: Elena Martínez (ICMA (CSIC - Universidad de Zaragoza))

1MP6-09_Martínez Elena.pdf

13:38 1MP6-11 Optimization of high isostatic pressure annealing processes for fabrication of MgB2 and Ba(Fe,Co)2As2 superconducting wires with high critical current density

Speaker: Andrzej Morawski (Institute of High Pressure Physics Polish Academy of Sciences Unipress)

13:39 1MP6-12 Composite superconducting MgB2 wires made by continuous process

Speaker: Bartek A. Glowacki (Department of Materials Science and Metallurgy, University of Cambridge)

1MP6-12_Glowacki Bartek A..pdf

13:40 1MP6-13 Effects of Dy2O3 doping on the Anisotropy and Transport of MgB2 wires

Speaker: Mike Sumption (MSE, The OHio State University)

13:30 → 15:30 Poster : 1MP7 - Coated Conductors 1/2

13:30 1MP7-01 The influence of laser energy density on microstructure and critical current of YGBCO and HGBCO films prepared by PLD

Speaker: Xiang Wu (Shanghai Jiao Tong University)

1MP7-01_Wu Xiang.pdf

13:31 1MP7-02 Development of textured YBa2Cu3O7−x superconducting coated conductors by Fluorine-Free MOD Route

Speaker: Jingyuan Chu (Shanghai Jiao Tong University)

13:32 1MP7-03 Enhanced flux pinning in TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy+BaZrO3 coated conductors by introducing an intermediate heat treatment

Speaker: Michio Sato (Seikei University)

13:33 1MP7-05 Tactical approaches in pilot-line manufacturing of HTS coated conductors for high field magnet application

Speaker: Ulrich Betz (Bruker HTS GmbH)

13:34 1MP7-06 Fabrication of HTS coated conductors via advanced high speed PLD process in Compact Pilot Line

Speaker: Alexander Usoskin (Bruker HTS GmbH)

13:35 1MP7-07 Enhancement of flux pinning by random pinning centers at 4.2 K in BaHfO3-doped SmBa2Cu3Oy coated conductors

Speaker: Shun Miura (Kyushu University)

13:36 1MP7-08 Effect of twin boundaries on the in-field Jc for TFA-MOD-(Y0.77Gd0.23)Ba2Cu3Oy wires

Speaker: Ryota Oku (Seikei University)

13:37 1MP7-10 Heating tolerance of critical current in industrial coated conductors

Speaker: Davide Uglietti (EPFL)

13:38 1MP7-12 Soldered contacts for HTS coated conductors

Speaker: Kai Ackermann (Karlsruhe Institute of Technology)

13:39 1MP7-13 Investigation Of Soldered Low-Resistance Joints For Commercial Coated Conductors Depending On Various Contact Pressures

Speaker: Pavel Degtyarenko (Joint Institute for High temperature of Russian Academy of Sciences)

13:40 1MP7-14 Determination of irreversible strain and stress limits of practical REBCO CC tapes under uniaxial tension

Speaker: Hyung-Seop Shin (Andong National University)

13:41 1MP7-15 Joint resistance characteristics of REBCO CC lap-joints using ultrasonic welding method in various temperatures and magnetic fields

Speaker: Mark A. Diaz (Andong National University)

13:42 1MP7-17 Development of a reel-to-reel process for laser structuring of coated conductors

Speaker: Rainer Nast (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP))

1MP7-17_Nast Rainer.pdf

13:43 1MP7-18 Increased pinning strength in 2nd generation REBCO coated conductors grown by liquid assisted processes.

Speaker: John Feighan (University of Cambridge)

1MP7-18_Feighan John.pdf

13:44 1MP7-19 Joining of second generation coated conductor tapes using a melt-texturing route

Speaker: Hagen Bryja (IFW Dresden)

13:45 1MP7-20 Coated superconducting tape model based on distribution of currents between the tape layers. Computing implementation

Speaker: Alfredo Álvarez (University of Extremadura)

1MP7-20_Álvarez Alfredo.pdf

13:46 1MP7-21 Correlation between resistances of face-to-face soldered joints and interface resistance between layers in superconducting tapes

Speaker: Nadezda Bagrets (Karlsruhe Institute of Techology)

13:47 1MP7-22 Coated conductor HTS tape for energy and magnet applications

Speaker: Markus Bauer (THEVA Dünnschichttechnik GmbH)

1MP7-22_Bauer Markus.pdf

15:30 → 15:50 Coffee Break

15:50 → 18:00 1P2 - Lessons learned

16:00 2P2-01 The LHC Main Magnet Electrical Interconnections: the Subtle Size of Superconductivity

Speaker: Lucio Rossi (CERN)

2P2-01_Lucio Rossi_Room 1.pdf

16:30 2P2-02 Some of the lessons learned during the construction and use of super magnets conductors in the last decades

Speaker: Roberto Penco (P.R.D. sas Genova)

2P2-02_Roberto Penco_Room 1.pdf

17:00 2P2-03 Learning from R&D and operation of HTS insert coil for high field magnet

Speaker: Satoshi Awaji (Tohoku University)

17:30 2P2-04 Transformation and perspectives of digital superconducting electronics

Speaker: Oleg Mukhanov (Hypres)

2P2-04_Oleg A. Mukhanov_Room 1.pdf

18:00 → 20:00 Exhibitor Reception

Tuesday 19 September

08:00 → 08:50 2P1 - Plenary 2

08:00 2P1-01 HTS versus LTS: physics, technology, and application prospects

Speaker: Michael Eisterer

2P1-01_Michael Eisterer_Room 1.pdf

08:50 → 09:50 2EO1 - Invited Orals

08:50 2EO1-01 Execution of Stored Programs in a Single-Flux-Quantum Microprocessor with Embedded Memories at 50 GHz

Speaker: AKIRA FUJIMAKI (Nagoya University)

2EO1-01_Akira Fujimaki_Room 3+4.pdf

09:20 2EO1-02 Topological superconductivity revealed by nanoscale Josephson junctions

Speaker: Floriana Lombardi (Chalmers)

2EO1-02_Floriana Lombardi_Room 3+4.pdf

08:50 → 09:50 2LO1 - Invited Orals

08:50 2LO1-01 Manufacturing of LTS and HTS magnets for heavy-ion rotating gantry

Speaker: Shigeki Takayama (Toshiba Corporation)

09:20 2LO1-02 Superconducting Cyclotrons for Hadron Radiotherapy

Speaker: Dr Joseph Minervini (Massachusetts Institute of Technology)

2LO1-02_Joseph Minervini_Room 1.pdf

08:50 → 09:50 2MO1 - Invited Orals

08:50 2MO1-01 Industrial production of Nb3Sn conductors for particle accelerator magnets

Speaker: Lance Cooley (Fermilab)

2MO1-01_Lance Cooley_Room 2.pdf

09:20 2MO1-02 Status of Industrial Coated Conductor Production and Properties

Speaker: Bernhard Holzapfel

2MO1-02_EUCAS_Geneva_2017_Holzapfel_pub.pdf

09:50 → 10:15 Coffee Break

10:15 → 12:15 2EO2 - Novel Devices and concepts

10:15 2EO2-01 Controllable transfer of spin-polarized Cooper pairs into a half-metal manganite

Speaker: Jason Robinson (Department of Materials Science)

10:45 2EO2-02 Road to scalable superconducting phase memory devices

Speaker: Sergey Bakurskiy (NUST MISIS)

2EO2-02_Sergey Bakurskiy_Room 3+4.pdf

11:00 2EO2-03 Superconducting spintronics with high-temperature superconductors

Speaker: Angelo Di Bernardo (University of Cambridge)

11:15 2EO2-04 Non-monotonic temperature dependence of magnetoresistance in Nb-Ni-Nb planar junctions below superconducting transition

Speaker: Ekta Bhatia (National Institute of Science Education and Research)

2EO2-04_Ekta Bhatia_Room 3+4.pdf

11:30 2EO2-05 Signatures of unconventional superconductivity in oxide based 2DEG

Speaker: Daniela Stornaiuolo (Department of Physics, University of Naples "Federico II" and CNR-SPIN Napoli)

2EO2-05_Daniela Stornaiuolo_Room 3+4.pdf

11:45 2EO2-06 Phase dynamics and macroscopic quantum phenomena in hybrid Josephson junctions

Speaker: Davide Massarotti (Dipartimento di Fisica, Università degli Studi di Napoli Federico II - CNR-SPIN UOS Napoli)

2EO2-06_Davide Massarotti_Room 3+4.pdf

12:00 2EO2-07 Quantum Voltage Standard Developments at NIST

Speaker: Sam Benz (NIST)

2EO2-07_Sam Benz_Room 3+4.pdf

10:15 → 12:15 2LO2 - Rotating Machines and other Large Size Applications

10:15 2LO2-01 Status of the Ecoswing project

Speaker: Markus Bauer (THEVA Dünnschichttechnik GmbH)

2LO2-01_Markus Bauer_Room 1.pdf

10:45 2LO2-02 Space research experiments with bulk superconductors

Speaker: Frank N. Werfel (Adelwitz Technologiezentrum GmbH (ATZ))

2LO2-02_Frank N. Werfel_Room 1.pdf

11:00 2LO2-03 Superconducting Medium Speed Synchronous Electrical Generator for 2MW Class Wind Mills

Speaker: Xavier Granados (ICMAB-CSIC)

2LO2-03_Xavier Granados_Room 1.pdf

11:15 2LO2-04 Development of a 8 kW HTS Axial Flux Machine for Electrical Aircraft Propulsion

Speaker: min zhang

2LO2-04_Min Zhang_room 1.pdf

11:30 2LO2-05 Loss Analysis of a 3 MW HTS Ship Propulsion Motor

Speaker: Toshiyuki Yanamoto (Kawasaki Heavy Industories, Ltd.)

2LO2-05_Toshiyuki Yanamoto_Room 1.pdf

11:45 2LO2-06 Comparison of Levelized Cost of Energy of superconducting direct drive generators for a 10 MW offshore wind turbine

Speaker: Asger Bech Abrahamsen (DTU Wind Energy, Technical University of Denmark)

2LO2-06_Asger Bech Abrahamsen_Room 1.pdf

12:00 2LO2-07 A novel magnetic bearing using 2G double crossed loops

Speaker: Flávio Martins (Universidade Federal do Rio de Janeiro)

2LO2-07_Flávio Martins_Room 1.pdf

10:15 → 12:15 2MO2 - Strain, Irradiation, Imaging

10:15 2MO2-01 Characterisation of accelerator magnet coils and coil constituents using neutron and synchrotron sources

Speaker: Christian Scheuerlein (CERN)

2MO2-01_Christian Scheuerlein_Room 2.pdf

10:30 2MO2-02 Spatial Distributions of Flexural Strength in TSMG and TSIG YBCO Bulk Superconductors

Speaker: Kai Yuan (Danny) Huang (University of Cambridge)

2MO2-02_Kai Yuan (Danny) Huang_Room 2.pdf

10:45 2MO2-03 Influence of artificial pinning centers on the radiation resistance of coated conductors

Speaker: David Fischer (Technische Universität Wien)

2MO2-03_David Fischer_Room 2.pdf

11:00 2MO2-04 Effects of swift-particle irradiations on the critical current density in FeSe

Speaker: Tsuyoshi Tamegai (The University of Tokyo)

2MO2-04_Tsuyoshi Tamegai_Room 2.pdf

11:15 2MO2-05 The number of displacement per atom (dpa), a universal parameter describing the decrease of Tc in superconducting accelerator magnets

Speaker: Rene Louis Jacques Flukiger (Universite de Geneve)

2MO2-05_René Flükiger_Room 2.pdf

11:30 2MO2-06 Tailored design of vortex behaviour and its visualisation with high-speed magneto-optical video

Speaker: Alexey V. Pan (Institute for Superconducting and Electronic Materials, University of Wollongong)

2MO2-06_Alexey V Pan_Room 2.pdf

11:45 2MO2-07 Magneto-Optical Imaging Of Ac Suscetibility In Superconducting Thin Films

Speaker: Wilson Ortiz (Departamento de Fisica, Universidade Federal de Sao Carlos)

2MO2-07_Wilson Ortiz_Room 2.pdf

12:00 2MO2-08 Observations of deformation effects on A15 production in Nb3Sn Powder In Tube wires

Speaker: Chris Segal (National High Magnetic Field Laboratory)

2MO2-08_Christopher Segal_Room 2.pdf

12:15 → 13:30 Lunch break

13:30 → 15:30 2LO3 - Fusion and Medical Applications

13:30 2LO3-01 Overcoming the Challenges of the ITER Magnets

Speaker: Neil Mitchell

2LO3-01_Neil Mitchell_Room 1.pdf

14:00 2LO3-02 Manufacturing the European superconducting TF coils for ITER

Speaker: Marc Cornelis (Fusion for Energy)

2LO3-02_Marc Cornelis_Room 1.pdf

14:15 2LO3-03 Damage investigations in the HTS cable prototype after the cycling test in EDIPO

Speaker: Nikolay Bykovsky (EPFL Swiss Plasma Center)

2LO3-03_Nikolay Bykovsky_Room 1.pdf

14:30 2LO3-04 Recent progress in development of Bi2212 Cable-in-Conduit Conductor

Speaker: Shi Yi (Institute of Plasma Physics, CAS and ASIPP)

2LO3-04_Shi Yi_Room 1.pdf

14:45 2LO3-05 Stability Analysis of the 100 kA-class HTS STARS Conductor

Speaker: Yoshiro TERAZAKI (National Institute for Fusion Science)

2LO3-05_Yoshiro Terazaki_Room 1.pdf

15:00 2LO3-06 Design and development of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems

Speaker: Matt Rindfleisch (Hyper Tech Research)

2LO3-06_Matt Rindfleisch_Room 1.pdf

15:15 2LO3-07 Development of High Stable Magnetic Field HTS Magnet System for MRI

Speaker: Shoichi Yokoyama (Mitsubishi Electric Corporation,Advanced Technology R & D Center)

2LO3-07_Shoichi Yokoyama_Room 1.pdf

13:30 → 15:30 2MO3 - Fe-based

13:30 2MO3-01 Recent progress in Fe-based superconducting wires and tapes

Speaker: Yanwei Ma (Institute of Electrical Engineering, Chinese Academy of Sciences)

2MO3-01_Yanwei Ma_Room 2.pdf

14:00 2MO3-02 Fe(Se,Te) epitaxial thin films deposited on metallic alloys with or without buffer layer

Speaker: Valeria Braccini (CNR-SPIN)

2MO3-02_Valeria Braccini_Room 2.pdf

14:15 2MO3-03 Flux pinning behaviour of a BaFe2(As1-xPx)2 thin film on IBAD-MgO technical substrate

Speaker: Jena Hänisch (Karlsruhe Institute of Technology)

2MO3-03_Jens Hänisch_Room 2.pdf

14:30 2MO3-04 The key microstructural factors for high transport current in randomly oriented 122 polycrystalline materials

Speaker: Akiyasu Yamamoto (Tokyo University of Agriculture and Technology)

2MO3-04_Akiyasu Yamamoto_Room 2.pdf

14:45 2MO3-05 High performance Ba0.6K0.4Fe2As2 superconducting tapes at high magnetic field and high temperature with hot-pressing process

Speaker: He Huang (Institute of Electrical Engineering, Chinese Academy of Science)

2MO3-05_He Huang_Room 2.pdf

15:00 2MO3-06 In-plane anisotropy of the critical current density in detwinned Co doped Ba122 single crystals

Speaker: Johannes Hecher (TU Wien, Atominstitut)

2MO3-06_Johannes Hecher_Room 2.pdf

15:15 2MO3-07 Critical current density and the phase diagram of CaKFe4As4 single crystals

Speaker: Shiv Jee Singh (University of Oxford)

2MO3-07_Shiv Jee Singh_Room 2.pdf

13:30 → 15:31 2MO4 - Progress in HTS Conductor Industry

13:30 2MO4-01 Double-disordered HTS coated conductors and their assemblies aimed for ultra-high fields: large area tapes

Speaker: Ulrich Betz (Bruker HTS GmbH)

2MO4-01_Ulrich Betz_Room 3+4.pdf

13:41 2MO4-02 Progress of Wire Development and Process Improvement on 2G HTS at SuperPower

Speaker: Drew Hazelton (SuperPower Inc.)

2MO4-02_Drew Hazelton_Room 3+4.pdf

13:52 2MO4-03 Developement of long-length BMO doped REBCO coated conductors by hot-wall PLD process

Speaker: Shinji Fujita (Fujikura Ltd.)

2MO4-03_Shinji Fujita_Room 3+4.pdf

14:03 2MO4-04 Development of 2G HTS wire production at SuperOx

Speaker: Alexander Molodyk (S-Innovations)

2MO4-04_Alexander Molodyk_Room 3+4.pdf

14:14 2MO4-05 Progress in SuNAM’s Coated Conductor Manufacturing

Speaker: Hunju Lee (SuNAM Co., Ltd.)

2MO4-05_Hunju Lee_Room 3+4.pdf

14:25 2MO4-06 Cost-effective production of HTS wires by chemical solution deposition

Speaker: Michael Baecker (Deutsche Nanoschicht GmbH)

2MO4-06_Michael Baecker_Room 3+4.pdf

14:36 2MO4-07 Multi-deposited inkjet printed YBCO on IBAD-MgO arquitectures for coated conductors

Speaker: Alberto Calleja (OXOLUTIA SL)

2MO4-07_Alberto Calleja_Room 3+4.pdf

14:47 2MO4-08 Progress of REBCO coated conductor program at SJTU and SSTC

Speaker: Yijie Li (Shanghai Jiao Tong University)

2MO4-08_Yijie Li_Room 3+4.pdf

14:58 2MO4-09 Thick Films of REBaCuO/YBaCuO and Long-length Coated Conductors Derived by Reel-to-Reel Metallorganic Solution and Ion-beam Assisted Depositions

Speaker: Chuanbing Cai (Shanghai Key Laboratory of High Temperature Superconductors,Shanghai University/Shanghai Creative Superconductor Technologies Co. Ltd.)

2MO4-09_Chuanbing Cai_Room 3+4.pdf

15:09 2MO4-10 Advances in Bi-2223 wire for High Field Applications

Speaker: Shin-ichi Kobayashi (Sumitomo Electric Industries, Ltd.)

2MO4-10_Shin-ichi Kobayashi_Room 3+4.pdf

15:20 2MO4-11 2G HTS Coated Conductors Buffer Stack Architecture Improvements at STI

Speaker: Jeong-Uk Huh (Superconductor Technologies Inc)

2MO4-11_Jeong-Uk Huh_Room 3+4.pdf

15:31 → 15:50 Coffee Break

16:00 → 18:00 2IO1 - Industry Session - Superconductivity: From Industry to Society

16:00 2IO1-01 Superconductivity: A Game Changer for the Industry of Energy

Speaker: Prof. Carlo Rubbia (GSSI (Gran Sasso Science Institute))

2IO1-01_Prof. Carlo Rubbia_Room 1.pdf

16:30 2IO1-02 Investing in Superconductivity: The Industry of Science

Speaker: Frank Laukien (Bruker Corporation)

2IO1-02 _Dr. Frank Laukien_Room 1.pdf

17:00 2IO1-03 Investing in Superconductivity: The Electronics Challenge

Speaker: John Levy (Hypres Inc)

2IO1-03 _Dr. John Levy_Room 1.pdf

17:30 2IO1-04 Investing in Superconductivity: Large Scale Endeavours

Speaker: Jean Luc Lancelot (Sigmaphi)

2IO1-04 _Dr. Jean-Luc Lancelot_Room 1.pdf

18:30 → 20:00 Outreach event F. Gianotti

Wednesday 20 September

08:00 → 08:50 3P1 - Plenary 3

08:00 3P1-01 The NHMFL 32 T superconducting magnet

Speaker: Hubertus Weijers (NHMFL/FSU)

3P1-01_Huub Weijers_Room 1.pdf

08:50 → 09:50 3EO1 - Invited Orals

08:50 3EO1-01 Nanowire-Based Single-Photon Detectors and Imagers

Speaker: Kark K Berggren (MIT)

3EO1-01_Karl K Berggren_Room 3+4.pdf

09:20 3EO1-02 Scanning SQUID-on-tip nanomagnetometry and nanothermometry of quantum systems

Speaker: Eli Zeldov (Weizmann Institute of Science)

3EO1-02_Eli Zeldov_Room 3+4.pdf

08:50 → 09:50 3LO1 - Invited Orals

08:50 3LO1-01 Achievements, Progress and Issues of No-Insulation HTS Coils

Speaker: Seungyong Hahn (Seoul National University)

3LO1-01_Seungyong Hahn_Room 1_SON.pdf

09:20 3LO1-02 Prospect of Liquid Hydrogen Cooled Superconducting Power Apparatus and Carbon Free Energy System

Speaker: Yasuyuki Shirai (Kyoto University)

3LO1-02_Yasuyuki Shirai_Room 1.pdf

08:50 → 09:50 3MO1 - Invited Orals

08:50 3MO1-01 New superconductors: waiting for room temperature (?)

Speaker: Gianni Profeta (Department of Physical and Chemical Sciences and SPIN-CNR)

3MO1-01_Gianni Profeta_Room 2.pdf

09:20 3MO1-02 A new chance for Bi-2212 wires to boost their applications in high magnetic fields

Speaker: andrea malagoli (CNR-SPIN)

3MO1-02_Andrea Malagoli_Room 2.pdf

09:50 → 10:15 Coffee Break

10:15 → 12:15 3LO2 - HTS Magnets and Cables

10:15 3LO2-01 Review of HTS cables for large magnets

Speaker: Davide Uglietti

3LO2-01_Davide Uglietti_Room 1.pdf

10:45 3LO2-02 Generation of 25 T: field quality and field profile measurements of a 4 T REBCO insert coil for a 21 T LTS magnet

Speaker: Christian Barth (University of Geneva, Department of Quantum Matter Physics)

3LO2-02_Christian Barth_Room 1.pdf

11:00 3LO2-03 First fully European CORC cables

Speaker: Michal Vojenciak (Institute of Electrical Engineering SAS)

3LO2-03_Michal Vojenciak_Room 1.pdf

11:15 3LO2-04 Current progress of High-temperature superconducting CORC® magnet cable and wire development

Speaker: Jeremy Weiss (University of Colorado)

3LO2-04_Jeremy Weiss_Room 1.pdf

11:30 3LO2-05 Transposed high current cables made with strong, rectangular Bi2212 superconductor wire

Speaker: Alexander Otto (Solid Material Solutions, LLC)

3LO2-05_Alexander Otto_Room 1.pdf

11:45 3LO2-06 An HTS Magnet Demonstrator for Space Experiment

Speaker: Gijs De Rijk (CERN)

3LO2-06_Gijs de Rijk_Room 1.pdf

12:00 3LO2-07 Results of the Development of a High Current HTS Cable for Accelerator Magnet Applications

Speaker: Luca Bottura (CERN)

3LO2-07_Luca Bottura_Room 1.pdf

10:15 → 12:15 3LO3 - Quench Protection

10:15 3LO3-01 Overview of the Quench Heater Performance for MQXF, the Nb3Sn low-beta Quadrupole for the High Luminosity LHC.

Speaker: Susana Izquierdo Bermudez (CERN)

3LO3-01_Susana Izquierdo Bermudez_Room 2.pdf

10:45 3LO3-02 Stability, quench, and current sharing in Roebel and CORC cables for HEP magnets

Speaker: Mike Sumption (The Ohio State University)

3LO3-02_Mike Sumption_Room 2.pdf

11:00 3LO3-03 Quench detection for HTS magnets using acoustic thermometry

Speaker: Maxim Marchevsky (Lawrence Berkeley National Lab. (US))

3LO3-03_Maxim Marchevsky_Room 2.pdf

11:15 3LO3-04 A novel quench detection method using radio frequency wave technology

Speaker: Hu Yanlan (Institute of plasma physics chinese academy od sciences)

3LO3-04_Hu Yanlan_Room 2.pdf

11:30 3LO3-05 Quench detection via Rayleigh backscattering interrogated optical fibers

Speaker: Federico Scurti (NCSU)

3LO3-05_Federico Scurti_Room 2.pdf

11:45 3LO3-07 Normal zone propagation velocity and surface temperature mapping in HTS coated conductors during quench

Speaker: Roland Gyuráki (Karlsruhe Institute of Technology)

3LO3-07_Roland Gyuraki_Room 2.pdf

12:00 3LO3-08 AC losses and inter-strand resistance in impregnated ReBCO Roebel cables

Speaker: Peng Gao (University of Twente)

3LO3-08_Peng Gao_Room 2.pdf

10:15 → 12:15 3MO2 - Magnetisation and Trapped Field

10:15 3MO2-01 Magnetic Flux Invasion and Field-Capturing in Pulsed-Field Magnetization for Layered MgB2 Bulk Magnets

Speaker: Tetsuo Oka (Niigata University)

3MO2-01_Tetsuo Oka_Room 3+4.pdf

10:30 3MO2-02 The successful incorporation of Ag into YBa2Cu3O7 bulk superconductors

Speaker: Jasmin Congreve (University of Cambridge)

3MO2-02_Jasmin Congreve_Room 3+4.pdf

10:45 3MO2-03 Towards optimisation of multi-pulse, multi-temperature pulsed field magnetisation of bulk high-temperature superconductors

Speaker: Mark Ainslie (University of Cambridge)

3MO2-03_Mark Ainslie_Room 3+4.pdf

11:00 3MO2-04 Progress in trapped field magnets made from stacks of coated conductor tape

Speaker: Anup Patel (Univeristy of Cambridge, Department of Materials Science and Metallurgy)

3MO2-04_Anup Patel_Room 3+4.pdf

11:15 3MO2-05 Magnetic Microscopy for Magnetic Relaxation in RE-123 Coated Conductor with DC Transport Current and External Magnetic Field

Speaker: Kohei Hisajima (Kyushu University)

3MO2-05_Kohei Hisajima_Room 3+4.pdf

11:30 3MO2-06 AC susceptibility analysis of coated conductor tapes

Speaker: Fedor Gömöry (Slovak Academy of Sciences)

3MO2-06_Fedor Gömöry_Room 3+4.pdf

11:45 3MO2-07 AC Losses of Roebel Cables with Striated 2G YBCO Strands

Speaker: Yifeng Yang

3MO2-07_Yifeng Yang_Room 3+4.pdf

12:00 3MO2-08 A finite element analysis of flux pumping in high Tc superconductors

Speaker: Archie Campbell (University of Cambridge)

3MO2-08_Archie Campbell_Room 3+4.pdf

12:15 → 13:30 Lunch break

13:30 → 15:30 Poster : 3EP1 - Microwave devices and SQUID application

13:30 3EP1-01 Josephson parametric amplifiers based on quadratic nonlinearity of rf SQUIDs operating at 4.2 K

Speaker: Marat Khabipov (Physikalisch-Technische Bundesanstalt)

13:31 3EP1-03 Utilizing HTS Resonators as NMR Transmit Coils

Speaker: William Brey (Florida State University - NHMFL)

13:32 3EP1-04 Analysis of characteristics of Al MKID resonators

Speaker: Takashi Noguchi (National Astronomical Observatory)

13:33 3EP1-05 A RF test vehicle for superconductor electronics interconnect

Speaker: Vladimir Talanov (Northrop Grumman Corp.)

13:34 3EP1-06 Study of Impedance Optimization between Modelling and Measurement of a Ka-band HTS MMIC Josephson Mixer

Speaker: Ting Zhang (University of Technology Sydney)

13:35 3EP1-07 Trimming Mechanism of External Quality Factor in HTS Bandpass Filter using Bulk Resonator

Speaker: Atsushi Saito (Yamagata University)

13:36 3EP1-08 Coupled superconducting resonators for tunneling-defect studies and qubit applications

Speaker: Bahman Sarabi (University of Maryland - College Park)

13:37 3EP1-09 Development of near infrared and visible Kinetic Inductance Detectors (KIDs) for astronomy

Speaker: Samir Beldi (GEPI, Observatoire de Paris, PSL Research University, CNRS)

13:38 3EP1-10 Two Dimensional Scanning of Intermodulation Distortion in Superconducting Resonators

Speaker: Stephen Remillard (Hope College Physics Department)

3EP1-10_Remillard Stephen.pdf

13:39 3EP1-11 Long period of time cooling technique using liquid nitrogen for HTS-SQUID systems

Speaker: Tsunehiro Hato (Superconducting sensing technology research association)

13:40 3EP1-12 Miniaturized Multi-Band HTS Bandpass Filter Design Using Single Perturbed Multimode Resonator with Multi-Transmission Zeros

Speaker: Jiaming Tang (Xiamen University)

3EP1-12_Tang Jiaming.pdf

13:41 3EP1-13 Compact Quad-Channel High Temperature Superconducting Diplexer Based on Stub-Loaded Square Ring Resonators

Speaker: Ping Gui (East China Jiaotong University)

3EP1-13_Guan Xuehui.pdf

13:42 3EP1-14 Design of Transmitting Filter using Cascaded Quadruplet Superconducting Bulk Resonator

Speaker: Takafumi Saito (Yamagata University)

13:43 3EP1-15 HTS dual-band bandpass filter with independently tunable center frequencies

Speaker: Naoto Sekiya (University of Yamanashi)

13:44 3EP1-17 Recently Developed Microwave Devices Based On High-TC Superconducting Films

Speaker: Liang Sun (O.Usikov IRE NAS of Ukraine)

3EP1-17_Cherpak Nickolay (Mykola).pdf

13:45 3EP1-18 Terahertz Radiation above 1 THz from intrinsic Josephson stack fabricated by acid modification process

Speaker: Takahiro Kato (Nagaoka University of Technology)

13:46 3EP1-19 Design of compact and high pole HTS tri-band bandpass filters using a new feeding structure

Speaker: Takahiro Unno (Japan)

13:47 3EP1-20 Design and Fabrication of HTS Pick-up Coil for Field-Swept Solid-State NMR

Speaker: Atsushi Saito (Yamagata University)

13:48 3EP1-21 Voltage Oscillations with Magnetic Flux in Thermally Hysteretic Nano-SQUIDs Based on Superconducting Weak Link

Speaker: Sourav Biswas (Indian Institute of Technology (IIT) Kanpur)

13:49 3EP1-22 Low-Loss Capacitively-Coupled Frequency Tuning and Impedance Matching Circuitry for HTS Based rf MRI Coils and Arrays

Speaker: Jarek Wosik (Texas Center for Superconductivity at University of Houston and Electrical and Computer Engineering Department, University of Houston, Houston, TX 77204, USA)

3EP1-22_Wosik Jarek.pdf

13:50 3EP1-23 Non-resonant microwave absorption in nano nickel added YBCO superconducting powders

Speaker: Fhulufhelo Nemangwele (University of Venda)

13:30 → 15:30 Poster : 3EP2 - Nano wire detectors and content information processing

13:30 3EP2-01 Superconducting Single Photon Detector with the Capability of Photon-number Resolving and Photon Positioning

Speaker: Xu Tao (Nanjing University)

3EP2-01_Tao Xu.pdf

13:31 3EP2-02 High Sensitivity Superconducting Nanowire Single Photon Detector Integrated with Distributed Bragg Reflector

Speaker: Yajun Chen (Nanjing University)

13:32 3EP2-03 Local and geometric timing jitter in superconducting nanowire single-photon detectors

Speaker: Alexej Semenov (DLR Institute of optical systems)

13:33 3EP2-05 Comparison of superconducting nanowire single photon detectors made of NbTiN and NbN thin films

Speaker: Xiaoyan Yang (Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS))

13:34 3EP2-06 Internal boundary conditions for elastic fluxon scattering at circuit interfaces

Speaker: Waltraut Wustmann (Laboratory for Physical Sciences, USA)

13:35 3EP2-08 Current dependence of the hot-spot response spectrum of superconducting single-photon detectors with different layouts

Speaker: Ilya Charaev (Karlsruhe Institute of Technology (KIT))

13:36 3EP2-09 Uniformity Analysis of Nanowires with Elemental Imaging

Speaker: Xiaoqing Jia (Research Institute of Superconductor Electronics (RISE), School of Electronic Science and Engineering, Nanjing University)

3EP2-09_Zhou Xiaoying.pdf

13:37 3EP2-10 Quasi-gated source for superconducting nanowire single-photon detector

Speaker: Xiaoqing Jia (Research Institute of Superconductor Electronics of Nanjing University)

3EP2-10_Zhang Labao.pdf

13:38 3EP2-11 Free-Space-Coupled Superconducting Nanowire Single Photon Detector Integrated with Distributed Bragg Reflector

Speaker: Yajun Chen (Nanjing University)

3EP2-11_Chen Yajun.pdf

13:39 3EP2-12 Superconducting components for quantum-information processing

Speaker: Elena Zhitlukhina (Donetsk Institute for Physics and Engineering, NANU)

13:40 3EP2-13 Superconducting nanowire avalanche photodetector made of amorphous molybdenum silicide material

Speaker: Misael Caloz (University of Geneva, GAP)

13:41 3EP2-14 Kinetic Inductance of Ultra-thin Magnesium Diboride Nanowires

Speaker: Thomas Melbourne (Temple University)

13:42 3EP2-15 Ultrafast photon-number-resolving detectors for NIR operating at 4.2 K

Speaker: Ekkehart Schmidt (Institute of Micro- und Nanoelectronic Systems (IMS), Karlsruhe Institute of Technology)

13:43 3EP2-16 One-dimensional p-wave superconductor toy-model for Majorana fermions in multiband semiconductor nanowires

Speaker: Durval Rodrigues Jr. (University of São Paulo - Lorena Engineering School)

3EP2-16_Rodrigues Jr. Durval.pdf

13:44 3EP2-17 Read-out Circuit Based on SFQ Logic Circuit for Photon-Number-Resolving SNSPD Array

Speaker: Hiroaki Myoren (Saitama University)

13:45 3EP2-18 Fast and high efficiency superconducting nanowire single photon detector at 630 nm

Speaker: Heqing Wang (Shanghai Institute of Microsystem and Information Technology (SIMIT))

13:30 → 15:30 Poster : 3LP1 - Fusion Magnets and Cables

13:30 3LP1-01 High current densities in round HTS CrossConductors of more than 500 A/mm² at 4.2 K, 12 T

Speaker: Michael J. Wolf (KIT)

13:31 3LP1-02 Experimental study on Bi-2212 CIC conductor

Speaker: Huajun Liu (Institute of Plasma Physics, Chinese Academy of Sciences)

3LP1-02_Liu Huajun.pdf

13:32 3LP1-03 Re-examination of refrigeration power of the LHD cryogenic system after 18 years of operation

Speaker: Toshiyuki Mito (National Institute for Fusion Science)

3LP1-03_Mito Toshiyuki.pdf

13:33 3LP1-05 Thermal-hydraulic characterization of the ITER Toroidal Field Insert coil

Speaker: Alberto Brighenti (Politecnico di Torino)

3LP1-05_Brighenti Alberto.pdf

13:34 3LP1-06 Multi-Tape Stack High Current Cable for No-Insulation HTS Fusion Magnet

Speaker: Seungyong Hahn (Seoul National University)

13:35 3LP1-08 Secondary Phases Quantification And Fracture Toughness At Cryogenic Temperature Of Austenitic Stainless Steel Welds For High Field Superconducting Magnets

Speaker: Ignacio Aviles (CERN / Universidad Carlos III de Madrid)

13:36 3LP1-10 NDT Status Of PF-1 Coil Welds

Speaker: Igor Sokolov (NIIEFA)

3LP1-10_Sokolov Igor_Update.pdf

13:37 3LP1-11 Mechanical analysis of the ENEA TF coil proposal for the EU DEMO fusion reactor

Speaker: Francesco Giorgetti (University of Rome Tor Vergata)

3LP1-11_Biancolini Marco Evangelos.pdf

13:38 3LP1-12 Performance analysis of the first PF coils design for the EU DEMO fusion reactor

Speaker: Andrea Zappatore (Politecnico di Torino)

3LP1-12_Zappatore Andrea.pdf

13:39 3LP1-13 Winding & Forming Technology Development for CFETR Central Solenoid Model Coil

Speaker: Houxiang Han (Institute of Plasma Physics Chinese Academy of Sciences)

3LP1-13_Han Houxiang.pdf

13:40 3LP1-14 Experimental study of steady-state transverse heat transfer in a single channel CICC

Speaker: Monika Lewandowska (West Pomeranian University of Technology, Szczecin)

3LP1-14_Lewandowska Monika.pdf

13:41 3LP1-15 R&D of the Helium Inlet for the CFETR Central Solenoid Model Coil

Speaker: Aihua Xu (Institute of Plasma Physics Chinese Academy of Sciences)

3LP1-15_Xu Aihua.pdf

13:42 3LP1-16 Thermal-Hydraulic Analysis of the DEMO CS coil

Speaker: Aleksandra Dembkowska (West Pomeranian University of Technology, Szczecin)

3LP1-16_Dembkowska Aleksandra.pdf

13:43 3LP1-17 Thermal-hydraulic test of the ENEA TF conductor sample for the EU DEMO fusion reactor

Speaker: Roberto Bonifetto (Politecnico di Torino)

3LP1-17_Bonifetto Roberto.pdf

13:30 → 15:30 Poster : 3LP2 - No insulation / Smart insulation Coils

13:30 3LP2-01 Investigation on two techniques for the reduction of screening current-induced field effects in ReBCO HTS coils

Speaker: Guillaume Dilasser (CEA Saclay)

3LP2-01_Dilasser Guillaume.pdf

13:31 3LP2-03 Thermal Quench Behaviors of 2G HTS Tape Samples with Polyimide Insulation and Smart Insulation Materials

Speaker: Chang Ju Hyeon (Jeju national university)

13:32 3LP2-04 Analysis of Dynamic Stress/Strain Distributions in a 10 T non-insulated GdBCO HTS Coil During Energization

Speaker: Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:33 3LP2-05 An adjustment method for turn-to-turn electrical contact resistance in No-Insulation REBCO coil: Multi-Layer Metal-Insulation method

Speaker: Satoka Yashiro (Waseda University)

13:34 3LP2-06 Simulation of electrical and thermal behavior of no-insulation REBCO pancake coil with multiple defects

Speaker: Qiyi Zheng (Waseda University)

13:35 3LP2-07 Non-uniform ramping loss distribution of multiple no-insulation REBCO coil system

Speaker: Yawei Wang (University of Bath)

13:36 3LP2-08 Investigation of Characteristics of No-Insulation Coil Considering the Influence of Stress Distribution on the Turn-to-Turn Contact Resistivity

Speaker: Guofeng Zhang (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)

3LP2-08_Zhang Yi.pdf

13:37 3LP2-09 Development of superconducting joints between Bi-2212/Ag wires

Speaker: Susannah Speller (University of Oxford, United Kingdom)

13:38 3LP2-11 Non-uniform ramping loss distribution of multiple no-insulation REBCO coil system

Speaker: Yawei Wang (University of Bath)

13:30 → 15:30 Poster : 3LP3 - HTS Magnets & Cables Modeling

13:30 3LP3-01 Innovative Electro-Thermal Modeling of Quench in REBCO Roebel Cables and Coils.

Speaker: Lorenzo Cavallucci (Department of Electrical, Electronic and Information Engineering, University of Bologna, Italy)

3LP3-01_Cavallucci Lorenzo.pdf

13:31 3LP3-02 Study of a superconducting magnetic diverter for the ATHENA X-RAY Space Telescope

Speaker: Nicolò Riva (EPFL)

13:32 3LP3-03 An Electromagnetic Analysis of REBCO Cable Configurations

Speaker: Luca Bottura (CERN)

13:33 3LP3-04 Simulation and analysis of an (RE)BCO tape stack magnet under the pulsed field magnetization

Speaker: Wenjiang Yang (Beihang University)

13:34 3LP3-05 A 3D T-A model for the stacks of second generation high temperature superconductor

Speaker: Jie Sheng (University of Bath)

13:35 3LP3-06 Influence of physical properties of a Coil Bobbin on Transient Thermal Stress in a REBCO Pancake-coil

Speaker: Daisuke Miyagi (Tohoku University)

13:36 3LP3-08 Parametric Evaluation of Pressure Drop and Heat Transfer with Nano Cryogenic Fluid in HTS cables

Speaker: Priyanka Anand (Lovely Professional University)

13:37 3LP3-10 Electromagnetic Parameter Analysis of YBCO Superconducting Cables With High Current for HTS Power Devices

Speaker: Shanshan Fu (China Electric Power Research Institute)

13:38 3LP3-11 Influence of the magnetization features of the HTS tape on the magnetic field homogeneity inside the superconducting unclosed shield

Speaker: Evgeny Kulikov (Joint Institute for Nuclear Research)

3LP3-11_Kulikov Evgeny.pdf

13:39 3LP3-14 Design of MgB2 superconducting joint using pressure-dependent finite element model

Speaker: Seong-Hoon Kang (Korea Institute of Materials Science)

13:40 3LP3-15 Conceptual Design of the Suspension Structures for High-temperature Superconducting Magnets Deployed in Mobile Platforms

Speaker: Timing Qu (Department of Mechanical Engineering, Tsinghua University)

13:41 3LP3-16 Shielding-current-induced fields in coils with various shapes wound with striated coated conductors

Speaker: Yudai Mizobata (Kyoto University)

13:42 3LP3-17 Screening currents within the Eucard HTS insert

Speaker: Philippe Fazilleau (cea)

3LP3-17_Fazilleau Philippe.pdf

13:43 3LP3-18 A 3-D Numerical Model of Critical Current in Twist Stacked Tape Cable

Speaker: Donghui Liu (Lanzhou University)

13:44 3LP3-19 HTS coil model for critical current calculation, quench behavior and comparison with wound sample experiment

Speaker: Tara Benkel (CNRS - LNCMI)

3LP3-19_Benkel Tara.pdf

13:45 3LP3-20 A 3D T-A model for the stacks of second generation high temperature superconductor

Speaker: Jie Sheng (University of Bath)

13:30 → 15:30 Poster : 3LP4 - Magnet Design and Quench

13:30 3LP4-02 Magnetic Design for the Superferric Multipole Magnets of the Super-FRS

Speaker: Hans Mueller (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

3LP4-02_Cho Eun Jung.pdf

13:31 3LP4-03 Force acting on a magnetic cloak placed in magnetic field

Speaker: Mykola Soloviov (IEE SAS)

3LP4-03_Soloviov Mykola.pdf

13:32 3LP4-04 Analytical Modeling of an Inductor ina Magnetic Circuit for Pulsed Field Magnetization of HTS Bulk

Speaker: Mohamed Elbaa (GREEN - University of Lorraine & LESI - University of Khemis Miliana)

13:33 3LP4-05 Capacity Allocation and Electromagnetic Optimization of SMES in Micro Grid

Speaker: Xiao Zhou (State Key Laboratory of Advanced Electromagnetic Engineering and Technology (R&D Center of Applied Superconductivity), Huazhong University of Science and Technology)

3LP4-05_Zhou Xiao.pdf

13:34 3LP4-06 A Compact Electromagnet with High-Tc Superconducting REBaCuO Tapes

Speaker: Chuanbing Cai (Shanghai Key Laboratory of High Temperature Superconductors, Shanghai University)

13:35 3LP4-07 Improvement of Magnetic Field Homogeneity from the HTS Joint-less Coil

Speaker: Seyeon Lee (Korea Polytechnic University)

3LP4-07_Lee Seyeon.pdf

13:36 3LP4-09 A 30kA IGBT based energy extraction system for the High Luminosity LHC magnet test facilities

Speaker: Gert Jan Coelingh (CERN)

13:37 3LP4-10 Over-Current Characteristics of Roebel Cable Sample With 2G YBCO Coated Conductor

Speaker: Panpan Chen (China Electric Power Research Institute)

13:38 3LP4-11 Study on hot spot temperature limits for epoxy-impregnated coil wound of Bi/Ag sheathed wire to be safe from damages caused by quenches

Speaker: Ryuta Matsuo (Sophia University)

13:39 3LP4-12 Experimental study on method to suppress hot spot temperature of HTS coil by quick transfer of current of quenching coil

Speaker: Ryuta Matsuo (Sophia University)

13:40 3LP4-13 Evaluation of Strain Tolerance to the Superconducting Magnet Quenching by the 3-point Bending Test Stand

Speaker: Manabu Aoki (Hitachi.Ltd. Research & Developing Group)

13:41 3LP4-14 Quench protection of the central solenoid model coil for the CFETR

Speaker: Yuanyuan Ma (Institute of Plasma Physics Chinese Academy of Sciences)

3LP4-14_Ma Yuanyuan.pdf

13:42 3LP4-15 Safety valve system for JT-60SA superconducting coils

Speaker: Kyohei Natsume (National Institute for Quantum and Radiological Science and Technology)

13:43 3LP4-16 Analysis of Voltage Noises for the Reliability Improvement of the KSTAR CS Quench Detection

Speaker: Geonwoo Baek (Yonsei University)

13:44 3LP4-17 Development of a digital quench detection system for Nb3Sn magnets and first measurements on prototype magnets

Speaker: Jens Steckert (CERN)

13:45 3LP4-19 Experiments to Validate New Method to Diagnose Soundness of The High Temperature Superconducting Coils by Pick-up Coil Pairs

Speaker: Akifumi Kawagoe (Kagoshima University)

13:46 3LP4-20 50 kV Fail-Safe Quench Detection System for Large Superconductor Magnets

Speaker: Walter H. Fietz (Karlsruhe Institute of Technology (KIT))

3LP4-20_Fietz Walter.pdf

13:47 3LP4-21 Partial isolation quench protection method for YBCO SMES magnet

Speaker: Qixing Sun (university of bath)

13:48 3LP4-22 Protection Strategy for HTS Coils in DC Electric Power Network

Speaker: Miyeon Yoon (Korea Polytechnic University)

13:49 3LP4-23 Quench detection utilizing stray capacitances

Speaker: Emmanuele Ravaioli (LBNL)

13:50 3LP4-24 Coil Development and Coupling-Loss Induced Quench Protection of Bi-2212 Magnets

Speaker: Daniel S. Davis (FSU-NHMFL)

3LP4-24_Davis Daniel S..pdf

13:30 → 15:30 Poster : 3LP5 - Levitation, transportation and propulsion

13:30 3LP5-01 Comparison of levitation forces between a permanent and a switchable magnetic track of the SupraTrans2 levitation system

Speaker: Tilo Espenhahn (IFW Dresden)

13:31 3LP5-02 Mechanical vibration test of a REBCO coil designed for application to the maglev

Speaker: Katsutoshi Mizuno (Railway Technical Research Institute)

13:32 3LP5-04 Research on HTS magnetic levitation bearing for submerged cryogenic disk motor-pump

Speaker: Liwang Ai (Institute of Electrical Engineering,Chinese Academy of Sciences;University of Chinese Academy of Sciences)

13:33 3LP5-05 Ripple field effects on the no-insulation rotor windings of high temperature superconductor machines used in all electrical aircraft.

Speaker: Yawei Wang (University of Bath)

13:34 3LP5-06 Experimental Study on the Magnetization Losses of Tri-axial CORC Cable used in All-Electric Aircraft

Speaker: Yawei Wang (University of Bath)

13:35 3LP5-07 Study of magnetic stiffness and effect on running stability in high speed train propelled by superconducting linear synchronous motor

Speaker: Jinho Lee (Korea Railroad Research Institute)

13:36 3LP5-08 The Critic Liquid-gas Phase Transition between Liquid Nitrogen and YBCO HTS bulks: from FEM Modeling to Its Experimental Study for ZFC Levitation Devices

Speaker: Paulo Branco (IDMEC - Prof. Paulo Branco)

3LP5-08_Branco Paulo.pdf

13:37 3LP5-10 Numerical modelling of Superconducting network in an All-Electric Aircraft

Speaker: Sriharsha Venuturumilli (University of Bath)

13:38 3LP5-11 Wireless Power Charging Characteristics between Copper Antenna and HTS Receiver Module under Strong Levitation Field in Superconducting MAGLEV Train

Speaker: Je Yull Lee (Suwon Science College)

13:39 3LP5-12 Analysis of the motion of a body in the linear HTS suspension along a curvilinear trajectory

Speaker: Pavel Kurbatov (National Research University "Moscow Power Engineering Institute")

3LP5-12_Kurbatova Ekaterina.pdf

13:40 3LP5-17 An Electromagnetic Turnout of Halbach-type PMG for Superconducting Maglev

Speaker: Yanxing Li (Southwest Jiaotong University)

3LP5-17_Li Yanxing.pdf

13:41 3LP5-18 Analysis of conducted emissions in high power superconducting electrical propulsion system

Speaker: Xiaojian Li (china north vehicle research institute)

13:42 3LP5-19 A Design Method of HTS Bulks Array for Decreasing Rotation Loss in a Superconducting Maglev Micro-thrust Stand

Speaker: Ye Mao (Beihang University)

13:30 → 15:30 Poster : 3LP6 - SMES and Combined devices

13:30 3LP6-01 Influences of Flux Diverter on Critical Current and Energy Storage Capacity of Mini-Size SMES Magnet Wound by 100-Meter-Class GdBCO Tape

Speaker: Jian-Xun Jin (Tianjin University)

3LP6-01_Liu Xiao-Dong.pdf

13:31 3LP6-03 Development and experimental investigation of a pancake coil consisted of high temperature composite superconductor with spiral cooling channel

Speaker: Jiahui Zhu (China Electric Power Research Institute)

13:32 3LP6-04 Test in strong background field of the first modular element of a REBCO 1MJ high energy density SMES

Speaker: Jeremie Ciceron (CNRS - Institut Néel)

3LP6-04_Ciceron Jeremie.pdf

13:33 3LP6-05 Research on the Application of Superconducting Magnetic Energy Storage in Microgrid System for Smoothing Power Fluctuation Caused by Operation Modes Switching

Speaker: Ying Xu (Huazhong University of Science and Technology)

3LP6-05_Xu Ying.pdf

13:34 3LP6-06 Design of a 30-K/4-kJ Solid Nitrogen Cooled HTS Magnet

Speaker: Timing Qu (Tsinghua University)

4LP1-10_Qu Timing.pdf

13:35 3LP6-07 Thermal Analysis of Superconducting Magnetic Energy Storage Sytems Using Finite Elements Mehod

Speaker: Serhat Tunc (Istanbul University Department of Physics)

13:36 3LP6-09 Conceptual Design and Evaluation of a MW-Class SMES-BES DVR System

Speaker: Zixuan Zheng (Sichuan University)

13:37 3LP6-11 A method for quench detection in inductive superconducting fault current limiters of transformer type

Speaker: Joao Murta-Pina (Centre of Technology and Systems (Uninova))

13:38 3LP6-12 AC-Loss Measurements and Detailed Loss Analysis on a 1MVA-Class Superconducting Fault Current Limiting Transformer

Speaker: Sebastian Hellmann (Karlsruhe Institute of Technology)

3LP6-12_Hellmann Sebastian.pdf

13:39 3LP6-13 Field test of a 1MVA/1MJ Superconducting Fault Current Limiter-Magnetic Energy Storage System

Speaker: Wenyong Guo (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:40 3LP6-14 2.5 kVA Single- Phase Self-Limiting Transformer Using Magnetic Flux Transfer

Speaker: Ercan Ertekin (Ankara University)

13:41 3LP6-15 Current Limiting Characteristics using Double Quench of Transformer Type SFCL with Additional Secondary Winding

Speaker: Sung-Hun Lim (Soongsil University)

13:42 3LP6-16 Design and Evaluation of SMES-Battery Energy Storage System for Smoothing Mode Transfer of a Micro-Grid between Grid-Connected and Islanded Conditions

Speaker: Lei Chen (Wuhan University)

3LP6-16_Chen Lei.pdf

13:30 → 15:30 Poster : 3LP7 - Power transmission and cables

13:30 3LP7-01 Design Optimization of a Superconducting Gas-Insulated Transmission Line

Speaker: Sastry Pamidi (Center for Advanced Power Systems)

3LP7-01_Cheetham Peter.pdf

13:31 3LP7-02 Influence of cabling on current carrying properties of MgB2 superconductors

Speaker: Sergey Fetisov (Russian Scientific R&D Cable Institute)

3LP7-02_Vysotsky Vitaly.pdf

13:32 3LP7-03 Technology Collaboration Program on High Temperature Superconductivity (HTS): how HTS applications may influence international standardization activity

Speaker: Giuliano Angeli (Ricerca sul Sistema Energetico - RSE S.p.A.)

3LP7-03_Angeli Giuliano.pdf

13:33 3LP7-04 Advances in the First Brazilian Project on HTS Power Cable

Speaker: Marcelo Neves (LMDS / UFRRJ (Federal Rural University of Rio de Janeiro))

13:34 3LP7-05 Computational simulation of thermal behavior of a Cold Dielectric HTS Power Cable

Speaker: Edson da Silva (LMDS/Physics Department/UFRRJ)

13:35 3LP7-06 Efficient numerical modelling of superconducting power cables – A comparative study between 2D and 3D numerical models

Speaker: Min Yao (Institute of Energy System, School of Engineering, the University of Edinburgh)

13:36 3LP7-07 Simulation and test of the compact 2G HTS power cable model

Speaker: Sergey Fetisov (Russian Scientific R&D Cable Institute)

3LP7-07_Vysotsky Vitaly.pdf

13:37 3LP7-08 Fault Current Investigations of a concentric three-phase HTS Cable connected to a SFCL Device

Speaker: Wescley Tiago Batista de Sousa (Karlsruher Institut für Technologie / Institut für Technische Physik)

3LP7-08_Batista de Sousa Wescley Tiago.pdf

13:38 3LP7-09 A 3D quench model for high temperature superconductor CORC cable based T-A formulation

Speaker: Zixuan Zhu (University of Bath)

13:39 3LP7-10 Design Comparisons of concentric three-phase HTS Cables

Speaker: Dustin Kottonau (Karlsruhe Institute of Technology / Institute for Technical Physics)

13:40 3LP7-11 Short circuit test results of 22kV HTS triaxial superconducting bus

Speaker: Kazuhisa Adachi (SWCC showa cable systems co., ltd)

13:41 3LP7-12 Comparative Analysis of Finite Element Method and Volume Element Method for Thermal Modeling of Superconducting DC Transmission Systems

Speaker: Dimitrios Doukas (Eidikos Logariasmos Kondilion Erevnas A.P.TH)

3LP7-12_Doukas Dimitrios.pdf

13:42 3LP7-13 The Model Development and Power System Analysis of HVDC system in Jeju Island with DC 80kV HTS

Speaker: Eunyoung Ko (Korea Electrotechnology Research Institute)

13:43 3LP7-15 Multi-Terminal DC Transmission Systems based on Superconducting Cables Feasibility Study, Modeling and Control

Speaker: Dimitrios Doukas (Eidikos Logariasmos Kondilion Erevnas A.P.TH)

3LP7-15_Doukas Dimitrios.pdf

13:44 3LP7-16 Comparisons between Simulations and Experimental Results of 66kV 40m model HTS Power Cable in Short-circuit Current Accidents

Speaker: Daichi Horita (WASEDA University)

13:45 3LP7-18 System Apparatus And Methods For A 4k (Stochastic) Superduct

Speaker: Charles Janeke (Constellation Dynamics LLC)

13:46 3LP7-19 UK’s 1st feasibility study of using superconducting cables in electricity distribution networks

Speaker: Weijia Yuan (University of Bath)

13:47 3LP7-20 3-D Numerical Modelling of AC losses in MgB2 wires for the 10 kA demonstrator of BEST PATHS

Speaker: Guillaume Escamez (NEXANS/SuperGRID)

13:48 3LP7-21 Safety verification of 275kV HTS Cable System in Short-current Accidents

Speaker: Yusuke Yokoo (Waseda University)

13:49 3LP7-24 A new proposal of Terminations for HTS Power Cables

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

13:50 3LP7-26 Electro-mechanical performance of 18-strand MgB2 cables for the Superconducting Link Project at CERN

Speaker: Konstantina Konstantopoulou (CERN)

3LP7-26_Konstantopoulou Konstantina.pdf

13:51 3LP7-27 Development of MgB2 cable conductors for very high power HVDC transmission within the Best Paths project

Speaker: Christian-eric Bruzek (Nexans France)

13:52 3LP7-28 Effective pumping of long HTS power transmission line insulated with heat radiation shield

Speaker: Yury Ivanov (Chubu University)

13:53 3LP7-29 Suitable cable structure of HTS tri-axial cable cooled by counter flow cooling method for long-distance power transmission

Speaker: Daisuke Miyagi (Tohoku University)

13:54 3LP7-30 An Improved Starting Strategy for a Spherical Superconducting Rotor

Speaker: Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)

13:55 3LP7-31 World first commercial project for applying superconducting cable system in Korea

Speaker: Cheolhwi Ryu (LS Cable&System Ltd.)

13:30 → 15:30 Poster : 3MP1 - Flux Pinning Cuprates

13:30 3MP1-02 Flux pinning in REBCO-based coated conductors probed by correlation of Jc and N-value

Speaker: Mayraluna Lao (Karlsruhe Institute of Technology)

13:31 3MP1-03 Influence of antidots on transport characteristics of HTSC

Speaker: Anna Moroz (National Research Nuclear University MEPhI)

3MP1-03_Moroz Anna.pdf

13:32 3MP1-04 Pinning, dissipation and anisotropy in nanostructured YBa2Cu3O7-x from microwave measurements.

Speaker: Enrico Silva (Universita` Roma Tre)

13:33 3MP1-05 Tunable pinning effects produced by non-uniform antidot arrays in YBCO thin films

Speaker: Antony Jones (Commonwealth Scientific and Industrial Research Organisation)

3MP1-05_Jones Antony.pdf

13:34 3MP1-06 Investigation of the longitudinal magnetic field effect in REBa2Cu3Oy films with various particulate artificial pinning centers

Speaker: Kazuki Sugihara (Nagoya University)

13:35 3MP1-07 Analysis of properties of 2G HTS tapes operating under DC magnetic field generated by permanent magnets

Speaker: Krzysztof Habelok (Silesian University of Technology)

13:36 3MP1-08 Vortex Dynamics in SmBa2Cu3Oy Films with BaHfO3 Nanorods as Correlated Artificial Pinning Centers

Speaker: Yuji Tsuchiya (Nagoya Univ.)

13:37 3MP1-09 Physical Properties of Nanostructured, Liquid Assisted Grown, Epitaxial YBa2Cu3O7-x Superconducting Films

Speaker: Juri Banchewski (Institut de Ciència de Materials de Barcelona (ICMAB-CSIC))

13:38 3MP1-10 The post-annealing effect of GdBa2Cu3O7-δ coated conductors on the pinning properties via a RCE-DR process

Speaker: Insung Park (Seoul National University)

13:39 3MP1-11 "Is Surface Decoration The New Black?" A Comparison Between Surface Decoration And Artificial Pinning Centers

Speaker: Achille Angrisani Armenio (ENEA)

13:40 3MP1-13 The effect of Nd2O3 addition on the magnetic properties of bulk single grain YBCO synthesized by Top Seeded Infiltration and Growth

Speaker: Talal A. Aljohani (Excellence Centre for Advanced Materials and Manufacturing, King Abdulaziz City for Science and Technology (KACST))

13:41 3MP1-14 Universal Scaling Of The Self-Field Critical Current From Single-Atomic Layer To Millimetre-Scale Superconductors

Speaker: Evgeny Talantsev (Victoria University of Wellington)

13:42 3MP1-15 YBa2Cu3O7-x nanocomposite films by CSD-ultrafast Transient Liquid Assisted Growth

Speaker: Júlia Jareño Cerulla (Institut de Ciències dels Materials de Barcelona (ICMAB-CSIC))

3MP1-15_Jareño Cerulla Júlia.pdf

13:43 3MP1-18 The High-Field, Strain Dependence of the Critical Current in GdBa2Cu3O7-x SuNAM Coated Conductors for Fusion Applications

Speaker: Jack Greenwood (University of Durham, Department of Physics)

3MP1-18_Greenwood Jack.pdf

13:44 3MP1-19 Influence of growth temperature and oxygen pressure on transport properties of BHO-doped REBCO(RE=Gd, Y) superconducting thin films

Speaker: Ruslan Popov (KIT)

13:45 3MP1-20 Critical Current And Vortex Flux Pinning Properties in YBa2Cu3O7-x Films with Ba2YTaO6 + Ba2YNbO6 Nano-inclusions By DC Transport And Microwave Measurements

Speaker: Anna Frolova (Roma Tre University)

13:46 3MP1-21 Influence of micron range artificial defects on critical current of 2G HTS tapes

Speaker: Sergei Pokrovskii (NRNU MEPHI)

13:47 3MP1-22 Critical current anisotropy in commercial coated conductors at higher temperatures

Speaker: Eugen Seiler (Institute of Electrical Engineering)

13:30 → 15:30 Poster : 3MP2 - Non-Cuprate Thin Films

13:30 3MP2-02 EBSD analysis of surface texture quality of oxide thin films in coated conductors

Speaker: Yue Zhao (Shanghai Jiao Tong University)

13:31 3MP2-03 Epitaxial (001) SrTiO3 films on Cu-based substrates by PLD under reducing atmosphere for YBCO Coated Conductor

Speaker: Elena Xuriguera (Universitat de Barcelona)

13:32 3MP2-05 Surface Flashover Characteristics of PPLP According to Its Orientation in Cryogenic Environment

Speaker: Jin-Yong Na (Hanyang university)

13:33 3MP2-06 Comparison of AC and DC Breakdown Characteristics of PPLP in LN2 Considering Corona Inception Voltage

Speaker: Ryul Hwang (Hanyang university)

13:34 3MP2-07 Synthesis of superconductive TaN films using DC reactive sputtering deposition

Speaker: Amanda Nieto (CENTRO DE INVESTIGACION CIENTIFICA Y DE EDUCACION SUPERIOR DE ENSENADA, BAJA CALIFORNIA)

13:35 3MP2-08 Influence of surface faceting of RABiT-type metallic substrate on epitaxial film growth

Speaker: Giuseppe Celentano (ENEA)

13:36 3MP2-09 Growth of biaxially-textured La2Zr2O7 and Zr-doped CeO2 on cold-rolled Ni-W substrate by CSD

Speaker: Angelo Vannozzi (ENEA)

13:37 3MP2-10 Influence of the inhomogeneous properties of a superconducting film on the penetration of the magnetic flux

Speaker: Loïc Burger (Department of Electricity, Electronics, and Computer Science of the University of Liège)

13:38 3MP2-11 Effect of homoepitaxial MgO films on the growth of CeO2 films by pulsed laser deposition

Speaker: Wei Wang (School of Physics and Astronomy, Shanghai Jiao Tong University)

3MP2-11_Wang Wei.pdf

13:39 3MP2-12 Preparation and characterization of Bi2Se3 films grown on FeSe2 by pulsed laser deposition

Speaker: Ming Lei (Southwest Jiaotong University)

3MP2-12_Lei Ming.pdf

13:40 3MP2-14 Topological quantum phase transition and superconductivity induced by pressure in the bismuth tellurohalide BiTeI

Speaker: Yanpeng Qi (Max Planck Institute for Chemical Physics of Solids)

13:41 3MP2-16 Novel Platinum-Based Superconductor LaPt5As with Unique Crystal Structure

Speaker: Masaya Fujioka (University of Hokkaido)

13:42 3MP2-17 Research on Electrical Performance of Impregnating Resin Material for Superconducting Magnet

Speaker: Yanfang Yang (China Electric Power Research Institute)

13:43 3MP2-18 Thermal conductivity AlN/epoxy composites for superconducting magnets

Speaker: Teng Zhang (Beijing Jiaotong University)

13:44 3MP2-19 Electromagnetic characterization of a new dielectric for High-Tc Power Cable

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

13:45 3MP2-20 Application of metamaterial nano-engineering for increasing the superconducting critical temperature

Speaker: Michael Osofsky (Materials Science and Technology Division, Naval Research Laboratory)

3MP2-20_Osofsky Michael.pdf

13:46 3MP2-21 Electron-beam evaporated superconducting titanium thin films for antenna coupled transition edge sensors

Speaker: Zheng Wang (Purple Mountain Observatory, Chinese Academy of Sciences)

13:30 → 15:30 Poster : 3MP3 - Cuprate Bulk

13:30 3MP3-01 Influence of doping on electrical and thermal properties of Dy0.95Pr0.05Ba2Cu2.94M0.06O7-δ (M = Fe, Ni, Zn and Mn)

Speaker: Ashok Rao (Manipal Institute of Technology, Manipal University)

13:31 3MP3-02 Batch processing of single-domain YBCO bulks with artificial holes

Speaker: Tomáš Hlásek (CAN SUPERCONDUCTORS s.r.o.)

13:32 3MP3-03 GdBCO single grain bulk superconductor via 2-step top seeded infiltration and growth process

Speaker: Devendra Kumar Namburi (UNIVERSITY OF CAMBRIDGE)

13:33 3MP3-04 Effects of Cu substitution for Nb in NbSr2RECu2Oz (z~8; RE: rare-earth element)

Speaker: Toshihiko Maeda (Kochi University of Technology)

13:34 3MP3-06 Effect of AuBr3 Doping on the Superconducting Properties of Hg-based Superconductors

Speaker: Ioseb Metskhvarishvili (Ilia Vekua Sukhumi Institute of Physics and Technology, Laboratory of Cryogenic Technique and Technologies)

13:35 3MP3-07 Production of polycrystalline superconducting ceramic nanowires, using the Solution Blow Spinning technique

Speaker: Rafael Zadorosny (UNESP - Ilha Solteira)

3MP3-07_Zadorosny Rafael.pdf

13:36 3MP3-08 Microstructure of IG-processed YBCO

Speaker: Michael Koblischka (Saarland University)

13:37 3MP3-09 Raman Characterisation of Melt-Textured Gd1212 Superconductors in the Normal State.

Speaker: Marcello Gombos (CNR-IMM UoS Napoli)

13:38 3MP3-10 Influence of CeO2, La2O3 and Sm2O3 additions on the Microstructure and Properties of YBCO Bulk Superconductors Prepared by TSIG Process

Speaker: Liudmila Vojtkova (Institute of Experimental Physics, Slovak Academy of Sciences)

13:39 3MP3-11 Addressing the challenge of bar shaped bulk REBCO superconductors

Speaker: Yunhua Shi (Engineering Department, University of Cambridge)

13:40 3MP3-12 The Influence of Gd Addition on the Microstructure and Superconducting Properties of YBCO Bulk Superconductors

Speaker: Daniela Volochová (Institute of Experimental Physics SAS)

13:41 3MP3-13 Characterization of liquid phase on production of single grain bulk GdBa2Cu3Oy superconductors grown by IG process

Speaker: Yuta Nakanishi (Shibaura Institute of Technology)

13:42 3MP3-14 Influence of Sm Doping on YBCO Bulks in Y123/Y211 System

Speaker: Monika Radušovská (Institute of Experimental Physics SAS)

13:43 3MP3-15 YBCO bulk production via a novel preparation technique for applications

Speaker: Ercan Ertekin (Ankara University)

13:44 3MP3-16 Change of superconducting properties of single grain Sm-Ba-Cu-O bulk by Sm/Ba substitution effect

Speaker: Petra Hajdová (Institute of Experimental Physics SAS)

13:45 3MP3-17 Effect of Different Preperation Techniques and re-pelletization Procedure on the Structural, Mechanical and Superconducting Properties of BSCCO Superconductors

Speaker: Hamit Öztürk (Ankara University 50. Year Campus)

13:46 3MP3-18 Effect of Nd(422) Dopant on the Superconducting Properties of Nd(123) Superconductor Melt-processed in Air

Speaker: Ahmed Mahmoud (Department of physics,Faculty of Science,University of Tripoli)

13:47 3MP3-20 Laser induced circular texture in Bi-2212 bulk

Speaker: Elena Martínez (ICMA (CSIC-University of Zaragoza))

3MP3-20_Amaveda Hippolite.pdf

13:30 → 15:30 Poster : 3MP4 - Bi-Based wired and LTS Materials

13:30 3MP4-01 Strong HTS wires based on the Bi2212 superconductor

Speaker: Alexander Otto (Solid Material Solutions, LLC)

13:31 3MP4-02 BOST progress on Bi-2212 round wire fabrication for high field magnet applications

Speaker: Yibing Huang (Bruker-OST)

13:32 3MP4-03 Overpressure densification of 2212 round wires before solenoid coil winding for higher winding pack stability and higher JW

Speaker: Maxime Matras (CERN)

3MP4-03_Matras Maxime.pdf

13:33 3MP4-04 Investigation of inter-grain critical current density in Bi-2212 superconducting wires through Jc(B,T) measurements

Speaker: Alessandro Leveratto (CNR-SPIN)

13:34 3MP4-05 Axial tensile stress-strain characterization of Bi-2212 round wire with different heat treatment pressures

Speaker: Jinggang Qin (Institute of Plasma Physics, CAS and ASIPP)

13:35 3MP4-07 Experimental Investigation of Bi-2223/Ag Superconducting Tape Joints

Speaker: Yuta Ebara (Sumitomo Heavy Industries, Ltd./ Engineering Physics Dept. / Technology Research Center)

13:36 3MP4-09 Investigations on the enhancement of the critical current density in Nb3Sn superconductors by internally oxidized ZrO2 particles

Speaker: Florin Buta (Universisty of Geneva, DQMP)

13:37 3MP4-11 Growth Rate and Morphology of Nb3Sn Layers in ITER-type Bronze-Processed Wires under Different Diffusion Annealing Regimes

Speaker: Evgeniya Valova-Zaharevskaya (M.N. Miheev Institute of Metal Physics of Ural Branch of Russian Academy of Sciences)

3MP4-11_Valova-Zaharevskaya Evgeniya.pdf

13:38 3MP4-12 Effect of initial Nb billet conditions on the strain hardening of Nb filaments in Nb3Sn strand for FCC

Speaker: Iksang Shin (KAT)

13:39 3MP4-14 Microstructure and superconducting properties of bronze-processed Nb3Sn layer using Cu-Sn-In ternary matrix

Speaker: Yoshimitsu Hishinuma (National Institute for Fusion Science)

13:40 3MP4-15 A Study on the High Jc Nb3Sn Strand Manufacturing Process

Speaker: Soobok Yoon (KAT)

13:41 3MP4-16 Effect of Sn concentration in bronze matrix on the pre-reaction formation of Nb3Sn layers in bronze-processed superconducting strands of different design

Speaker: Irina Deryagina (M.N. Miheev Institute of Metal Physics, Ural Branch of RAS (IMP, UB RAS))

3MP4-16_Deryagina Irina.pdf

13:42 3MP4-17 Lattice dynamics and compressibility on Nb3Sn at high pressure by a multitechnique approach

Speaker: Rita Loria (Science Department, University Roma Tre, Rome, Italy)

13:43 3MP4-18 Role of Ti on critical current density-dependent metallurgical aspects of A15-based superconductors by bronze method

Speaker: Sangeeta Santra (University of Oxford)

13:44 3MP4-19 Lead-free persistent mode joints between NbTi wires

Speaker: Timothy Davies (Department of Materials, University of Oxford)

13:45 3MP4-20 Ternary Molybdenum Chalcogenide superconducting wires for ultra-high field applications

Speaker: Bernd Seeber (University of Geneva, now scMetrology SARL)

3MP4-20_Seeber Bernd.pdf

13:46 3MP4-21 Effect of overpressure heat treatment on the microstructure and the current-carrying capacity of Bi-2212 wires

Speaker: Qingbin Hao (Northwest Institute for Nonferrous Metal Research)

13:30 → 15:30 Poster : 3MP5 - Magnetization and Trapped Field + AC Losses 2/2

13:30 3MP5-01 Model for the response of superconducting/ferromagnetic structures subjected to crossed fields

Speaker: Benoit Vanderheyden (University of Liege)

13:31 3MP5-02 Waveform control pulse magnetization for HTS bulk with flux jump

Speaker: Tetsuya Ida (Tokyo University of Marine Science and Technology)

13:32 3MP5-03 Creep and relaxation phenomena in a long MgB2 tube subjected to transversal magnetic field, at 4.2 K

Speaker: Giovanni Giunchi (Materials Science Consultant)

13:33 3MP5-04 Magnetic shielding properties of superconducting and superconducting/ferromagnetic superimposed systems

Speaker: Laura Gozzellino (Politecnico di Torino, Department of Applied Science and Technology)

3MP5-04_Gozzellino Laura.pdf

13:34 3MP5-05 Magnetic shielding at 1 T: achievements of machinable MgB2

Speaker: Laura Gozzelino (University of Torino)

3MP5-05_Truccato Marco.pdf

13:35 3MP5-07 Flux jump assisted pulsed field magnetisation in a portable magnet system

Speaker: Difan Zhou (University of Cambridge)

3MP5-07_Zhou Difan.pdf

13:36 3MP5-08 Three-dimensional modelling and experiments of cross-field demagnetization in cubic bulks

Speaker: Milan Kapolka (Institute of Electrical Engineering, SAS)

3MP5-08_Kapolka Milan.pdf

13:37 3MP5-09 Three-dimensional numerical modeling of a superconducting cube: benchmarking confirms non-rectangular current paths

Speaker: Francesco Grilli (Slovak Academy of Sciences)

3MP5-09_Kapolka Milan.pdf

13:38 3MP5-10 Pulse Magnetization of Jointless Superconducting Loops for Magnetic Bearings Height Control

Speaker: Rubens de Andrade Junior (Federal University of Rio de Janeiro)

3MP5-10_Santos da Cruz Vagner.pdf

13:39 3MP5-11 Dependence of the trapped magnetic flux density of YBCO pellets on mechanical stress

Speaker: Bruno Douine (Universidad Nacional Autonoma de Mexico)

13:40 3MP5-12 Demagnetisation study of pulse-field magnetised superconducting bulks

Speaker: Jan Srpcic (University of Cambridge)

3MP5-12_Srpcic Jan.pdf

13:41 3MP5-13 Modifying the Pulsed-Field-Magnetization Technique for HTS Bulks in Electrical machines and Without Magnetic Field Sensors

Speaker: João Arnoud (Instituto Superior Técnico (IST) - University of Lisbon)

3MP5-13_Arnoud João.pdf

13:42 3MP5-14 Inverse B-J models for determining current distributions in magnetised bulk superconductors

Speaker: Fernando Perez (Bulk Superconductivity Group, Department of Engineering, University of Cambridge)

13:43 3MP5-15 AC losses in MgB2 wires and tapes in frequencies up to 18 kHz

Speaker: Yasha Nikulshin (Bar Ilan University)

13:44 3MP5-16 Measurement and Analysis of the Dynamic Effects in an HTS Dipole Magnet

Speaker: Carlo Petrone (CERN)

15:30 → 15:50 Coffee Break

15:50 → 18:05 3EO2 - Super conducting Photon Dectetors

15:50 3EO2-01 Superconducting Nanowire Single-Photon Detector as a Key Element for Quantum Photonic Integrated Circuits

Speaker: Gregory Goltsman (Moscow State Pedagogical University)

3EO2-01_Gregory Goltsman_Room 3+4.pdf

16:05 3EO2-02 Bistable 10 nm thick YBa2Cu3O7-δ nanowires as new materials for single photon detectors

Speaker: Riccardo Arpaia (Chalmers University of Technology)

3EO2-02_Riccardo Arpaia_Room 3+4.pdf

16:20 3EO2-03 Photoresponse of La1.85Sr0.15CuO4 nanostrip

Speaker: Hiroyuki Shibata (Kitami Institute of Technology)

3EO2-03_Hiroyuki Shibata_Room 3+4.pdf

16:35 3EO2-04 Optically probing the detection mechanism in a molybdenum silicide superconducting nanowire single-photon detector

Speaker: Misael Caloz (Universite de Geneve (CH))

3EO2-04_Misael Caloz_Room 3+4.pdf

16:50 3EO2-05 THz Heterodyne Detectors Based on MgB2 Thin Films

Speaker: Boris Karasik (Jet Propulsion Laboratory)

3EO2-05_Boris Karasik_Room 3+4.pdf

17:05 3EO2-06 Kinetic inductance bolometer arrays for security screening applicatoins

Speaker: Juha Hassel (VTT Technical Research Centre of Finland)

3EO2-06_Juha Hassel_Room 3+4.pdf

17:20 3EO2-07 SNSPD Array Based on MgF2 Substrate for Laser Ranging of Targets in Space

Speaker: Labao Zhang (Research Institute of Superconductor Electronics of Nanjing University)

3EO2-07_Labao Zhang_Room 3+4_no_indico.pdf

17:35 3EO2-08 Realization of the Resonant Cold-Electron Bolometer (RCEB) with a Kinetic Inductance Nanofilter for Multichroic Pixels

Speaker: Leonid Kuzmin (Chalmers University of Technology)

3EO2-08_Leonid Kuzmin_Room 3+4.pdf

15:50 → 18:05 3LO4 - Power Transmission Lines and Cables

15:50 3LO4-01 Recent status and progress on the HTS applications of AC and DC power transmission

Speaker: Minwon Park (Changwon National University)

3LO4-01_Minwon Park_Room 1.pdf

16:20 3LO4-02 The Supernet NL Project: The Netherlands High Voltage HTS Cable Project

Speaker: Babak Gholizad (TenneT TSO)

3LO4-02_Babak Gholizad_Room 1.pdf

16:35 3LO4-03 The second cooling test of 1000-meter superconducting DC cable system in Ishikari

Speaker: Noriko Chikumoto (Chubu University)

3LO4-03_Noriko Chikumoto_Room 1.pdf

16:50 3LO4-04 Protection against the ground fault for 275 kV HTS cable and the experiment

Speaker: Tomohiro Takagi (Furukawa Electric co., ltd.)

3LO4-04_Tomohiro Takagi_Room 1.pdf

17:05 3LO4-05 Three years operation experience of the AmpaCity system installation in Essen, Germany

Speaker: Jean-Maxime Saugrain (Nexans Deutschland GmbH)

3LO4-05_Jean-Maxime Saugrain_Room 1.pdf

17:20 3LO4-06 Status of the MgB2-based high-power DC cable demonstrator within BEST PATHS

Speaker: Christian-eric Bruzek (Nexans France)

3LO4-06_Christian-Eric Bruzek_Room 1.pdf

17:35 3LO4-07 3S – Superconducting DC-Busbar for High Current Applications

Speaker: Steffen Elschner (University of Applied Science Mannheim)

3LO4-07_Steffen Elschner_Room 1.pdf

17:50 3LO4-08

15:50 → 18:05 3MO3 - Cuprate Thin films

15:50 3MO3-01 Surface diffusion constants and supersaturations in SmBCO films prepared by pulsed laser deposition method at various deposition conditions

Speaker: Yusuke Ichino (Nagoya University)

3MO3-01_Yusuke Ichino_Room 2.pdf

16:05 3MO3-02 Transport properties and granular properties relation in YBCO and composite YBCO films determined by means of synchrotron X-ray diffraction

Speaker: Andrea Augieri (ENEA-FSN)

3MO3-02_Andrea Augieri_Room 2.pdf

16:20 3MO3-03 Mechanisms of novel transient liquid assisted growth for ultrafast production of YBa2Cu3O7-x thin films

Speaker: Laia Soler Bru (Institut de Ciència de Materials de Barcelona (CSIC))

3MO3-03_Laia Soler Bru_Room 2.pdf

16:35 3MO3-04 Preparation of superconducting GdBa2Cu3O7-x-BaHfO3 nanocomposite films by CSD with improved electrical performances

Speaker: PABLO CAYADO (Karlsruhe Institute of Technology (KIT))

3MO3-04_Pablo Cayado_Room 2.pdf

16:50 3MO3-05 Influence of granularity on the local transport properties in pure and BaHfO3 doped YBCO films on technical templates

Speaker: Ruben Hühne (IFW Dresden)

3MO3-05_Ruben Hühne_Room 2.pdf

17:05 3MO3-06 Ionic liquid gating of YBa_2Cu_3O_{7-x} grain boundaries

Speaker: Alexandre Fête (University of Geneva - DQMP)

3MO3-06_Alexandre_Fete_Room_2.pdf

17:20 3MO3-07 Study of Tl(1223) superconducting coatings for beam impedance mitigation in the Future Circular Collider

Speaker: Dr Emilio Bellingeri (CNR-SPIN)

FCC_Eucas.pdf

17:35 3MO3-08 Development of a fluorine-free polymer-assisted-deposition route for YBa2Cu3O7-x superconducting films

Speaker: Mircea Nasui (Technical University of Cluj-Napoca)

3MO3-08_Mircea Nasui_Room 2.pdf

17:50 3MO3-09 Control of Jc anisotropy in REBCO thin film with nanoscale Y211 inclusions

Speaker: Alok K. Jha (Kyushu Institute of Technology)

3MO3-09_Alok K. Jha_Room 2.pdf

Thursday 21 September

08:00 → 09:50 4LO1 - SRF

08:00 4LO1-01 Industrial fabrication and surface treatment of superconducting RF cavities: challenge and main lesson

Speaker: Paolo Michelato (INFN MIlano)

4LO1-01_Paolo Michelato_Room 1.pdf

08:30 4LO1-02 Path forward for economic and high performance SRF accelerator structures

Speaker: Ganapati Myneni (Jefferson Lab)

4LO1-02_Ganapati Myneni_Room 1.pdf

08:45 4LO1-03 Superconducting RF and Magnet Technologis for International Linear Collider

Speaker: Prof. Akira Yamamoto (KEK and CERN)

4LO1-03_Akira Yamamoto_Room 1.pdf

09:00 4LO1-04 Superconducting RF at CERN: operation, projects, and R&D

Speaker: Frank Gerigk (CERN)

4LO1-04_Frank Gerigk_Room 1.pdf

09:15 4LO1-05 Alternative Coating Techniques and Materials for SRF Cavities

Speaker: Guillaume Jonathan Rosaz (CERN)

4LO1-05_Guillaume Rosaz_Room 1.pdf

09:30 4LO1-06 Dislocation substructures, and low temperature N doping impact on flux penetration and trapping in SRF Nb

Speaker: Peter Lee (Florida State University)

4LO1-06_Peter Lee_Room 1.pdf

08:00 → 09:50 4MO1 - Bi-based and A15 Materials

08:00 4MO1-01 Key parameters for strong a-axis grain growth in narrow filament cavities of Bi-2212 round wires

Speaker: Fumitake Kametani (NHMFL Tallahassee US)

4MO1-01_Fumitake Kametani_Room 2.pdf

08:15 4MO1-02 High-Field Thermal Conductivity of OP Bi-2212 wires

Speaker: Marco Bonura

4MO1-02_Marco Bonura_Room 2.pdf

08:30 4MO1-03 Improved critical current density in recent Bi-2212 round wires

Speaker: Jianyi Jiang (Florida State University)

4MO1-03_Jianyi Jiang_Room 2_indico.pdf

08:45 4MO1-04 Effects of element addition into Cu matrix for IT-processed Nb3Sn wires

Speaker: Nobuya Banno (National Institute for Materials Science)

4MO1-04_Nobuya Banno_Room 2_indico.pdf

09:00 4MO1-05 Refining the Grain Size in Nb3Sn conductor in Hyper Tech

Speaker: Matt Rindfleisch (Hyper Tech Research)

4MO1-05_Matt Rindfleisch_Room 2.pdf

09:15 4MO1-06 New Nb3Al superconducting wires with Ta-Ni interfilament matrix

Speaker: Akihiro Kikuchi (National Institute for Materials Science)

4MO1-06_Akihiro Kikuchi_Room 2.pdf

09:30 4MO1-07 New understanding of Nb3Sn doping for strand performance improvement

Speaker: Chiara Tarantini (ASC-NHMFL, Florida State University)

4MO1-07_Chiara Tarantini_Room 2.pdf

08:00 → 09:50 4MO2 - MgB2

08:00 4MO2-01 Improvement in microstructure and critical current density of in situ PIT MgB2 wires by cold working with a swaging machine

Speaker: Hiroaki Kumakura (National Institute for Materials Science)

4MO2-01_Hiroaki Kumakura_Room 3+4.pdf

08:30 4MO2-02 Copper stabilized dense MgB2 wires fabricated by two types of methods: mechanical milling and internal magnesium diffusion

Speaker: Motomune Kodama (Hitachi, Ltd. Research & Development Group)

4MO2-02_Motomune Kodama_Room 3+4.pdf

08:45 4MO2-03 Electro-mechanical studies of MgB2 wires and cables prepared by different processes.

Speaker: Pavol Kovac (Institute of Electrical Engineering of SAS)

4MO2-03_Pavol Kovac_Room 3+4.pdf

09:00 4MO2-04 Rapid synthesis of MgB2 bulks by inductive heating

Speaker: Davide Matera

4MO2-04_Davide Matera_Room 3+4.pdf

09:15 4MO2-05 High Trapped Fields in C-doped Mg(B1-xCx)2 Bulk Superconductors Fabricated by Infiltration and Growth

Speaker: Ashutosh Bhagurkar (Brunel University)

4MO2-05_Ashutosh Bhagurkar_Room 3+4.pdf

09:30 4MO2-06 MgB2 round wires for the high-power superconducting cable demonstrator in the Best Paths project

Speaker: Matteo Tropeano (Columbus Superconductors, SpA)

4MO2-06_Matteo Tropeano_Room 3+4.pdf

09:50 → 10:15 Coffee Break

10:15 → 12:15 Poster : 4EP1 - SQUID Applications and detectors

10:15 4EP1-01 Scaling Properties of YBCO SQAs

Speaker: Susan Berggren (Space and Naval Warfare Systems Center Pacific)

10:16 4EP1-02 Towards practical HfTi-nanoSQUID sensors

Speaker: Sylke Bechstein (Physikalisch-Technische Bundesanstalt)

4EP1-02_Bechstein Sylke.pdf

10:17 4EP1-03 X-ray absorption fine structure spectrometer with superconducting-tunnel-junction array detector for light element impurities in heat resistant steels

Speaker: Masataka Ohkubo (AIST)

10:18 4EP1-04 Hot electron bolometer mixer for operation in the mid-infrared region

Speaker: Akira Kawakami (NICT)

4EP1-04_kawakami Akira.pdf

10:19 4EP1-05 Production of HTS-SQUID magnetometer with ramp-edge junctions exhibiting lowered noise in ac biasing mode

Speaker: Seiji Adachi (SUSTERA)

10:20 4EP1-07 Fabrication and Characterization of large High-Tc Superconducting Quantum Interference Filters

Speaker: Emma Mitchell (CSIRO Manufacturing)

10:21 4EP1-09 Design Map for bi-SQUIDs

Speaker: Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)

10:22 4EP1-10 Static and Radiofrequency magnetic response of High TC Superconducting Quantum Interference Filters made by ion irradiation

Speaker: Eliana Recoba Pawlowski (Thales Research and Technology)

10:23 4EP1-11 A practical SQUID system with two-stage readout scheme

Speaker: Guofeng Zhang (State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050, China)

10:24 4EP1-12 Practical-SQUID current sensors with nanometer-sized Nb-AlOx-Nb Josephson junctions

Speaker: Jan-Hendrik Storm (Physikalisch-Technische Bundesanstalt)

10:25 4EP1-13 Parameters characterization of all-NbN DC-SQUID magnetometer

Speaker: Liu Quansheng (SIMIT)

10:26 4EP1-14 Development of Microwave Kinetic Inductance Detectors with YBCO Spiral Resonators

Speaker: Seiichiro Ariyoshi (Toyohashi University of Technology)

10:27 4EP1-15 Superconducting Imager by means of a Delay Line Current-Biased Kinetic Inductance Detector

Speaker: Takekazu Ishida (Osaka Prefecture University)

10:28 4EP1-16 Low-Noise Series SQUID Array Amplifiers for

Speaker: Robin Cantor (STAR Cryoelectronics)

10:29 4EP1-17 Fe(Se,Te) Josephson junctions, dc-SQUIDs and nanostrips

Speaker: Carlo Ferdeghini (SPIN-CNR, Istituto Superconduttori)

10:30 4EP1-18 Investigation of three-dimensional digital circuits with nanometer Josephson junctions made by Focused Ion Beam

Speaker: Pascal Febvre (Université Savoie Mont Blanc)

4EP1-18_Febvre Pascal.pdf

10:31 4EP1-19 Investigation of the Harmonic Mixer and Low Frequency Converter Regimes in a Superconducting Tunnel Junction

Speaker: Konstantin Kalashnikov (Moscow Institute of Physics and Technology)

10:32 4EP1-20 Development of the devices for non-destructive testing based on SQUID systems.

Speaker: Konstantin Kalashnikov (Moscow Institute of Physics and Technology)

10:15 → 12:15 Poster : 4EP2 - Josephson Junctions and devices

10:15 4EP2-04 Metrology for Single Flux Quantum Electronics

Speaker: Adam Sirois (NIST-Boulder)

10:16 4EP2-07 Fabrication and evaluation of hetero-epitaxial multilayer for Nb/AlN/Nb junctions

Speaker: Yasuhiro Odashima (Yamagata University)

10:17 4EP2-08 Circuit Modification and Parameters Optimization for a High Frequency RSFQ T1FF

Speaker: Tahereh Jabbari (Electrical Engineering Department, Sharif University of Technology)

10:18 4EP2-09 Josephson junctions arrays of alternating S and N film parts

Speaker: Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)

10:19 4EP2-10 Resonances and phase locking in Josephson high-Q circuits

Speaker: Nikolay Kolotinskiy (Lomonosov Moscow State University, Moscow, Russia)

10:20 4EP2-11 High-Tc Josephson junctions as quasiclassical THz detectors

Speaker: Yuriy Divin (Kotelnikov Institute of Radio Engineering and Electronics of Russian Academy of Sciences)

10:21 4EP2-12 Focused He+-Ion Beam Irradiated High Tc Josephson Junctions

Speaker: Francois Couedo (Physics and Materials Laboratory (LPEM), ESPCI-PSL-CNRS-UPMC)

10:22 4EP2-13 Restoration of Josephson Current by Applying Vertical Magnetic Field

Speaker: Atsushi Suzuki (Kanagawa University)

10:23 4EP2-14 Terahertz emission from electrode structure optimized Bi-2212 intrinsic Josephson junctions

Speaker: Teppei Uchida (Yamagata University)

10:24 4EP2-15 Josephson standards for a new AC quantum voltage infrastructure (in the scope of the ACQ-PRO EMPIR project)

Speaker: Paolo Durandetto (INRiM - Istituto Nazionale di Ricerca Metrologica)

4EP2-15_Durandetto Paolo.pdf

10:25 4EP2-16 Modulation characteristics of a Josephson current through Nb tunnel junction by a parallel magnetic field and a perpendicular magnetic field

Speaker: Norimichi Watanabe (Kanagawa University)

10:26 4EP2-17 Measurement of Specific Capacitance for Nb/Al-AlOx/Nb Josephson Tunnel Junctions

Speaker: Xiong Wei (Shanghai institute of microsystem and information technology)

10:27 4EP2-18 Measurement of thickness dependence of superconductivity in epitaxial NbN films

Speaker: Zhang Qiyu (Shanghai Institute of Microsystem and Information Technology)

10:28 4EP2-21 Quantum memcapacitance with transmon-resonator system

Speaker: Denys Karpov (B. Verkin ILTPE of NASU)

4EP2-21_Karpov Denys.pdf

10:29 4EP2-22 Josephson quantum DAC based on binary divided 1-V SNIS array

Speaker: Bruno Trinchera (INRIM - Istituto Nazionale di Ricerca Metrologica)

10:30 4EP2-23 Critical current scattering in series arrays of HTS SQUIDs based on ion-damaged barrier Josephson junctions

Speaker: Denis Crété (Unité Mixte de Physique CNRS/THALES)

4EP2-23_Crété Denis.pdf

10:31 4EP2-24 Megahertz Waveform Synthesis with the Josephson Arbitrary Waveform Synthesizer

Speaker: Justus Brevik (NIST Boulder)

10:15 → 12:15 Poster : 4LP1 - Accelerator magnets and cables

10:15 4LP1-01 An High Field Insert Accelerator Class Dipole Magnet Constructed with Roebel Multi-tape HTS Cable

Speaker: Glyn Kirby (CERN)

4LP1-01_Kirby Glyn.pdf

10:16 4LP1-02 Quench propagation in Nb3Sn cos-theta 11 T dipole model magnets in high stress areas

Speaker: Franco Julio Mangiarotti (CERN)

4LP1-02 poster.pdf

10:17 4LP1-03 Simulation of a Quench Event in the Reconfigured LHC Main Dipole Circuit Including the 11 T Magnets for the High-Luminosity Upgrade

Speaker: Alejandro Fernandez Navarro (CERN)

4LP1-03_Fernandez Navarro Alejandro.pdf

10:18 4LP1-04 Finite Element Analysis of the mechanical conditions in the Nb3Sn cable of the DS11T dipole magnet during operation

Speaker: Christian Löffler (CERN)

FEA of the mechanical conditions in the Nb3Sn cable of the DS11T dipole magn-POSTER.pdf

10:19 4LP1-05 Advanced Nb3Sn Conductors Tested in a Racetrack Coil Configuration for the 11T Dipole Project

Speaker: Hugo Bajas (CERN)

10:20 4LP1-06 Design of a 4 Tm forward superconducting dipole for the FCC-hh detector magnet system

Speaker: Erwin Bielert (University of Illinois at Urbana-Champaign (UIUC) and CERN)

10:21 4LP1-08 Measuring the Magnetic Center Behavior and Field of FRIB Superconducting Magnets

Speaker: Ge Zhengfu (XI’AN superconducting magnet technology co.，ltd)

10:22 4LP1-09 Process gas characterisation and control during Nb3Sn coil reaction heat treatment

Speaker: Christian Scheuerlein (CERN)

10:23 4LP1-10 Design and Testing of a Demonstration HTS dipole Magnet at 77 K

Speaker: Timing Qu (Tsinghua University)

10:24 4LP1-11 Trans National Access to CERN Superconducting Magnet Test Facility within the framework of EUCARD2

Speaker: Marta Bajko (CERN)

10:25 4LP1-13 Nitrogen Cryogenic System for the NICA Accelerator Complex at JINR

Speaker: Iuliia Mitrofanova (JINR)

4LP1-13_Mitrofanova Iuliia.pdf

10:26 4LP1-14 Compact common-coil design for a future collider

Speaker: Emmanuele Ravaioli (LBNL)

10:27 4LP1-15 Prototype of the short-period superconducting undulator with neutral poles: test results

Speaker: Nikolay Mezentsev (Budker Institute of Nuclear Physics)

10:28 4LP1-16 Construction and cold test of the superferric octupole for the LHC Luminosity upgrade

Speaker: Marco Statera (Istituto Nazionale di Fisica Nucleare)

4LP1-16_Statera Marco.pdf

10:29 4LP1-17 Assembly and test of the Nb3Sn dipole magnet FRESCA2

Speaker: Paolo Ferracin (CERN)

10:15 → 12:15 Poster : 4LP2 - Ancillaries and Technology

10:15 4LP2-01 Theoretical Expressions of Output Errors in Two Types of Superconducting Level Sensors

Speaker: Kazuhiro Kajikawa (Kyushu University)

10:16 4LP2-02 Strain measurements with Fiber Bragg Grating sensors in the short models of the HiLumi LHC Low-Beta Quadrupole Magnet MQXF

Speaker: Antonella Chiuchiolo (CERN)

10:17 4LP2-03 A three-dimensional measurement system for HTS magnetic levitation bearings

Speaker: Li Wanjie (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:18 4LP2-04 Determination of the N exponent of 2G HTS tapes from V-I curves using a thermally stabilized fast pulsed system

Speaker: Rubens de Andrade Junior (Universidade Federal do Rio de Janeiro)

4LP2-04_Barusco Pedro.pdf

10:19 4LP2-05 Instrumentation for laboratorial high current tests of 3-phase Cold Dielectric HTS Power Cable

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

4LP2-05_Neves Marcelo.pdf

10:20 4LP2-06 Novel rotating coil setup for definition of the magnetic field quality for XFEL magnets

Speaker: Yury Klimchenko (JSC «D.V.Efremov Institute of Electrophysical Apparatus» NIIEFA)

4LP2-06_Klimchenko Yury.pdf

10:21 4LP2-07 A Method for Monitoring Unbalanced Three-Phase HTS Cable Systems via Time-Frequency Domain Reflectometry

Speaker: Geon Seok Lee (Yonsei University)

4LP2-07_Lee Geon Seok.pdf

10:22 4LP2-08 Variable Temperature Insert for Measurement of Critical Current in HT Superconductors

Speaker: David Richter (CERN)

10:23 4LP2-09 Conduction Cooled HTS Current Leads for the SIS100 Corrector Magnets

Speaker: Alexander Bleile (GSI)

4LP2-09_Bleile Alexander.pdf

10:24 4LP2-10 Design of YBCO HTS current leads for high field medical cyclotron application

Speaker: Kaizhong Ding (institute of plasma physics, Chinese Academy of Sciences)

10:25 4LP2-11 Experimental Test of a Multistage Cooled Current Lead for Superconducting High Current DC Applications, designed for an Operating Current of 20 kA

Speaker: Mathias Noe (Chair for Energy Systems and Energy Management at University of Kaiserslautern)

10:26 4LP2-12 Design, Testing and Commissioning of 25.4 kA HTS Current Leads

Speaker: Michael Boersch (WEKA AG)

10:27 4LP2-13 Cylindrical geometry flux-pump dynamos

Speaker: Zhenan Jiang (Victoria University of Wellington)

4LP2-13_Bumby Chris.pdf

10:28 4LP2-14 Cryogenic Electrical Insulation Characteristics of Solid Insulator for the DC HTS Cable

Speaker: Haejong Kim (KERI)

10:29 4LP2-15 Discharge mechanisms in liquid nitrogen – breakdown field strength of gaseous nitrogen

Speaker: Nicholas Hill (TU Braunschweig)

4LP2-15_Hill Nicholas.pdf

10:30 4LP2-16 Keeping Cool Under Pressure: Dielectric Strength of Solid Insulation in Boiling Liquid Nitrogen

Speaker: Zhiyang Jin (University of Canterbury)

4LP2-16_Jin Zhiyang.pdf

10:31 4LP2-17 The Trap Distribution And Dielectric Failure Strength Of Polyamide Film Under DC And Repetitive Pulse Voltage Combination

Speaker: Mingyang Wang (Tianjin University)

10:32 4LP2-18 Enhanced Dielectric Breakdown Strength of Cryogenic Gas Mixtures to be Used in Superconducting Power Devices

Speaker: Sastry Pamidi (Center for Advanced Power Systems)

4LP2-18_Cheetham Peter.pdf

10:33 4LP2-21 Breakdown and Partial Discharge Characteristics of Transformer Board and Insulating Paper Materials in Liquid Nitrogen

Speaker: Christof Humpert (TH Köln (University of Applied Sciences))

4LP2-21_Humpert Christof.pdf

10:34 4LP2-22 Influence of Pressure on Breakdown Characteristics of Liquid Nitrogen in Non-uniform Electric Fields

Speaker: Christof Humpert (TH Köln (University of Applied Sciences))

4LP2-22_Humpert Christof.pdf

10:35 4LP2-23 Arc Energy Evaluation In Liquid Nitrogen

Speaker: Muhammad Junaid (State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University)

10:36 4LP2-24 Trap Distribution and Dielectric Breakdown of Irradiated Polyimide Film under Combined DC and Pulse Voltage in LN2

Speaker: Boxue Du (Tianjin University)

10:37 4LP2-25 Tree Growth Characteristics of Epoxy Resin in LN2 under DC overlapped pulse voltage

Speaker: Boxue Du (Tianjin University)

10:38 4LP2-26 Partial Discharge and Breakdown Behavior of Syntactic Foams at 77 K

Speaker: Stefan Seibel (RWTH Aachen University)

4LP2-26_Seibel Stefan.pdf

10:39 4LP2-27 Analysis of a superconducting arc-induction type DC circuit breaker for the stability betterment in the direct current system

Speaker: Sangyong Park (CHOSUN UNIVERSITY)

10:40 4LP2-27 Cryogenic considerations for cooling superconducting links and application to the high luminosity upgrade of the Large Hadron Collider (LHC)

Speaker: Daniel Berkowitz Zamora (CERN)

Cryogenic considerations for cooling SC links and applications for the HL LHC - poster.pdf

10:15 → 12:15 Poster : 4LP3 - Design , manufacture & test of HTS systems

10:15 4LP3-01 Minimum quench energy of a wind and react Bi-2212 coil in the temperature region 4.2 to 30 K immersed in either liquid helium, vapour or vacuum.

Speaker: Edward Young (University of Southampton)

10:16 4LP3-03 A System for the Generation of Reversible Magnetic Fields using Bulk Superconductors

Speaker: Louis Dupont (Normandie Université, ENSICAEN, UNICAEN, CNRS, CRISMAT)

10:17 4LP3-05 A novel Current Switch Controlled by Alternating Current Magnetic Field

Speaker: Chao Li (University of Cambridge)

10:18 4LP3-07 Conduction Cooled HTS Dipolar Magnet, Realization and Experimental Results

Speaker: Dan Enache (National Institute for Research and Development in Electrical Engineering, ICPE-CA)

4LP3-07_Dobrin Ion.pdf

10:19 4LP3-08 Fabrication and testing of Bi-2212 test coils for high field research magnets

Speaker: Steven Ball (Oxford Instruments)

EUCAS 2017 SB 3.pdf

10:20 4LP3-09 Design and Test of a double pancake coil wound by HTS Roebel cable

Speaker: Peng Song (Tsinghua University)

4LP3-09_Song Peng.pdf

10:21 4LP3-10 Manufacture and Test of a 3 T Class Insert Coil with YBCO-Coated Conductor

Speaker: Yi Shi (Institute of Plasma Physics Chinese Academy of Sciences)

4LP3-10_Shi Yi.pdf

10:22 4LP3-11 Test of the First HTS Demonstrator Coil in the 11 T Background Field of the SULTAN Facility

Speaker: Pierluigi Bruzzone (École Polytechnique Fédérale de Lausanne)

10:23 4LP3-12 Validation of the electromagnetic design of a REBCO Superconducting Self-Supplied Electromagnetic Launcher through modelling and characterization

Speaker: Arnaud Badel (University Grenoble Alpes–CNRS)

10:15 → 12:15 Poster : 4LP4 - HTS Magnets and Cables

10:15 4LP4-02 Experimental verifications of REBCO layer winding for persistent current operation

Speaker: Yasuyuki Miyoshi (Japan Superconductor Technology, Inc.)

4LP4-02_Miyoshi Yasuyuki.pdf

10:16 4LP4-03 A highly reproducible superconducting joint between REBCO coated conductors made by a novel method

Speaker: Tatsuoki Nagaishi (Sumitomo Electric)

10:17 4LP4-04 Persistent superconducting Joint of REBCO tapes for HTS-MRI magnets

Speaker: Akinobu Nakai (Furukawa Electric co.,ltd)

10:18 4LP4-05 Measurement of the inter strand resistance in Roebel cable made of REBCO tapes

Speaker: Jerome Fleiter (CERN)

10:19 4LP4-06 Design Aspects of ReBCO CORC based Cable-In-Conduit Conductors

Speaker: Tim Mulder (CERN and the University of Twente)

4LP4-06_Mulder Tim.pdf

10:20 4LP4-07 Superconducting High Current ReBCO CORC Bus bars for Large Detector Magnets

Speaker: Tim Mulder (CERN and the University of Twente)

4LP4-07_Mulder Tim.pdf

10:21 4LP4-08 Advanced intermediate lengths of punch and coat processed HTS-Roebel cables in EuCARD2

Speaker: Anna Kario (Karlsruhe Institute of Technology)

10:22 4LP4-09 Mechanical Characteristics of HTS CrossConductor Strands at Cryogenic Temperature

Speaker: Klaus P. Weiss (Karlsruhe Institute of Technology)

EUCAS_2017_4LP4-09_Mechanical_Characteristics-Weiss.pdf

10:23 4LP4-10 Optimization of Winding Technique Based on Anisotropic Characteristics of Commercial REBCO Tapes

Speaker: Jie Sheng (University of Bath)

10:24 4LP4-11 Quench Characteristics of 2G YBCO Roebel Cable in a Pancake Coil

Speaker: Yifeng Yang (University of Southampton)

10:25 4LP4-12 Could superconducting magnets protect astronauts against space radiation?

Speaker: Riccardo Musenich (INFN)

10:15 → 12:15 Poster : 4LP5 - Other Large Size Application

10:15 4LP5-03 Enhancement of Magnetic Field Sensing Accuracy by Using High-Temperature Superconductor Shields in Multilayer Planar Configuration

Speaker: Jozef Kvitkovic (Florida State University, Center for Advanced Power Systems)

4LP5-03_Kvitkovic Jozef.pdf

10:16 4LP5-04 Manufacturing of coil formers by integral open-die forging and CNC ring rolling process

Speaker: Manuel Spielhofer (Imbach & Cie AG)

4LP5-04_Stocker Urban.pdf

10:17 4LP5-05 Manufacture technology of the 9.4 T whole-body MRI superconducting coils

Speaker: Lei Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:18 4LP5-06 Development of a 9.4T Whole-body MRI Superconducting Magnet

Speaker: Lankai Li (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:19 4LP5-07 Modelling and Testing of MgB2 Segmented Coils and Persistent joints for MgB2 Magnets

Speaker: Mike Sumption (MSE, The OHio State University)

10:20 4LP5-08 Stress induced magnetic field in-homogeneity in a 1.5T superconducting MRI magnet

Speaker: Sankar Ram Thekkethil (Inter University Accelerator Centre)

10:21 4LP5-09 Design of superconducting external interference Screening (EIS) coils for 1.5T MRI Magnet

Speaker: Mukesh Kumar (Inter University Accelerator Centre)

10:22 4LP5-10 Stress Analysis Of Cryogenic Suspension System Of Superconducting Mri Magnet Cryostat

Speaker: Navneet Kumar Suman (Inter University Accelerator Centre)

10:23 4LP5-11 Reduction methods of screening currents in REBCO multiple coils based on transport-current control

Speaker: Yuichi Ozone (Waseda Univesity)

10:24 4LP5-12 Quench Analysis Of A Whole-Body 1.5 T Superconducting MRI Magnet

Speaker: Vijay Soni (Inter-University Accelerator Centre, New Delhi)

10:25 4LP5-13 Numerical Analysis of Eddy Current Forces in the Thermal Shield of a Superconducting Magnet during Quench Events

Speaker: Qiuliang Wang (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:26 4LP5-16 Flux expulsion/pinning study in large grain SRF cavities with different impurity

Speaker: Pashupati Dhakal (Jefferson Lab)

10:27 4LP5-17 Performance Testing of Superconducting RF cavities at CERN in the post construction era of the LHC

Speaker: Alick Macpherson (CERN)

EUCAS_Poster_Macpherson.pdf

10:28 4LP5-18 Commissioning of IPN Orsay Vacuum furnace and first successful Heat treatment of SRF bulk Nb cavities

Speaker: Mohammed Fouaidy (Institut de Physique Nucléaire)

10:29 4LP5-19 Towards Optimization of Centrifugal Barrel Polishing Procedure for Treatment of Niobium Cavities

Speaker: Alena Prudnikava (University of Hamburg/DESY)

10:30 4LP5-20 Multi-physics Computation and Testing on Pre-Tuning of a Prototype of 1.5-GHz SRF Cavity

Speaker: Chih-Hung Lo (National Synchrotron Radiation Research Center)

10:31 4LP5-21 ReBCO coated conductors for the future circular hadron collider beam screen

Speaker: Joffre Gutierrez (ICMAB - CSIC, Bellaterra, Spain)

10:32 4LP5-22 Summary of low temperature nitrogen doping study on SRF cavities

Speaker: Pashupati Dhakal (Jefferson Lab)

10:33 4LP5-23 Characteristics analysis in Resonance coil applied to Superconducting Wireless Power Transfer

Speaker: In-Sung Jeong (Chosun University)

10:34 4LP5-24 ORE SEPARATOR MADE OF HIGH-TEMPERATURE SUPERCONDUCTORS YBCO

Speaker: Jiangdi Fan (Chongqing Academy of Science and Technology)

10:15 → 12:15 Poster : 4LP6 - Motors, Generators and other Rotating Machines

10:15 4LP6-01 Testing of a full-scale HTS coil for a 2.5 MW wind turbine generator

Speaker: Yudong Jiang (Dongfang Electric Corporation)

10:16 4LP6-02 Design of a 15 kW fully superconducting synchronous generator

Speaker: Timing Qu (Department of mechanical engineering, Tsinghua University)

4LP6-02_Li Yufan.pdf

10:17 4LP6-03 Electromagnetic characteristic analysis and Optimization design of a novel HTS coreless induction motor with high speed

Speaker: Bin Liu (School of Electrical Engineering, Beijing Jiaotong University)

4LP6-03_Liu Bin.pdf

10:18 4LP6-04 System approach of usability of HTS electrical machines in future electric aircraft

Speaker: Dmitry Dezhin (Moscow Aviation Institute)

4LP6-04_Dezhin Dmitry.pdf

10:19 4LP6-06 A Large Scale Double-Stator Direct Driving HTS Wind Generator

Speaker: Yi Cheng (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)

4LP6-06_Cheng Yi.pdf

10:20 4LP6-07 HTS Inductor Motor with Combined Excitation

Speaker: Roman Ilyasov (Moscow Aviation Institute)

10:21 4LP6-08 Brushless non-steel HTS generator with combined excitation with trapped field plates on the rotor

Speaker: Kirill A. Modestov (Moscow Aviation Institute (MAI))

4LP6-08_Modestov Kirill A..pdf

10:22 4LP6-09 A new type of superconducting motor with 2G HTS magnet rings

Speaker: Min Zhang (University of Bath)

10:23 4LP6-10 Electromagnetic Design of Superconducting Synchronous Motors for Electric Aircraft Propulsion

Speaker: Yutaka Terao (University of Tokyo)

10:24 4LP6-11 Electromechanical Design of a MW Class Wave Energy Converter with a Tubular HTS Linear Generator

Speaker: Hailian Jing (Tokyo University of Marine Science and Technology)

4LP6-11_Jing Hailian.pdf

10:25 4LP6-12 Electrical analysis of 10 MW superconducting generator for aircraft applications

Speaker: Kiwook Yun (Kyushu university)

10:26 4LP6-13 Comparative study of 1MW PM and HTS synchronous generators for marine current turbine

Speaker: Zhi Li (2-1-6, Etchujima, Koto-ku, Tokyo, JAPAN)

4LP6-13_Li Zhi.pdf

10:27 4LP6-14 Design of a 20 MW Fully Superconducting Wind Turbine Generator to Minimize the Levelized Cost of Energy

Speaker: Hoang Trung - Kien (GeePs, CentraleSupelec, University of Paris-Saclay)

10:28 4LP6-15 Design and Performance of AC Superconducting Motors for Aerospace Electric Propulsion Systems

Speaker: Charalampos D. Manolopoulos (School of Electrical and Electronic Engineering, The University of Manchester)

4LP6-15_Manolopoulos Charalampos D.pdf

10:29 4LP6-16 Design report of a 4KW superconducting HTS synchronous motor using HTS stacked tapes.

Speaker: Mehdi Baghdadi (University of Greenwich)

10:30 4LP6-17 Design study of 2MW fully superconducting motors

Speaker: Shogo Fukuda (Kyushu University)

10:31 4LP6-18 A superconducting machine for Aircraft application

Speaker: Alexandre Colle (Universite de Lorraine - SAFRAN Tech)

10:32 4LP6-19 Design Aspects and Testing of Superconducting Flywheels

Speaker: Achim Hobl (Babcock Noell GmbH)

4LP6-19_Hobl Achim.pdf

10:33 4LP6-20 The Effect Research of Armature Position on Electromagnetic Propulsion Efficiency

Speaker: Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:34 4LP6-22 Small-scale motor with AC HTS windings

Speaker: Dmitry Dezhin (Moscow Aviation Institute)

10:15 → 12:15 Poster : 4LP7 - FCL and the Grid

10:15 4LP7-01 New technique for using SMES to limit fault currents in wind farm power systems

Speaker: Mariam Elshiekh (University of Bath)

10:16 4LP7-02 Characteristics of Reactor type superconducting DC current limiter for improved stability in the DC power system

Speaker: Hyewon Choi (CHOSUN University)

10:17 4LP7-03 Optimum Positioning Of HTS Based Resistive Fault Current Limiter

Speaker: Prof. V. V. Rao (INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR)

10:18 4LP7-04 Feasible Application Study of Different Types of Superconducting Fault Current Limiters in HVDC Grids

Speaker: Ho-Yun Lee (Hanyang University)

10:19 4LP7-06 Application of Flux-Coupling SFCL to Secure Fault Ride Through in Carbon-Free Stand-Alone Microgrid

Speaker: Soo Hyoung Lee (Korea Electrotechnology Research Institute (KERI))

10:20 4LP7-08 Power Differential Protection for Transmission Lines with Superconducting Fault Current Limiters

Speaker: Diaa-Eldin A. Mansour (Kafrelsheikh University)

10:21 4LP7-09 Hardware-in-the-loop Simulation on Fault Current Limiting Operation of RE-123 Coated Conductors under the Influence of Spatial Inhomogeneity

Speaker: Kohei Higashikawa (Kyushu University)

10:22 4LP7-10 DC Superconducting Fault Current Limiter Applications and Technical Indexes

Speaker: Bin Li (School of Electrical & Information Engineering, Tianjin University, China)

10:23 4LP7-11 Fault Current Limitation Coordination in Electric Power Grid with Superconducting Fault Current Limiters

Speaker: Naoki Hayakawa (Nagoya University)

10:24 4LP7-13 Study of SFCL for multi-terminal HVDC network

Speaker: Ying Xin (Tianjin University)

4LP7-13_Xin Ying.pdf

10:25 4LP7-15 PHILS of Transmission Line Protection System for the application of 154 kV SFCL in Korea

Speaker: Seung Ryul Lee (KERI)

10:26 4LP7-16 Research on the Application of Active Saturated Iron-Core Superconductive Fault Current Limiters in the VSC-HVDC System

Speaker: Botong Li (School of Electrical and Information Engineer, Tianjin University)

10:27 4LP7-17 Comparison between Different Models of Superconducting Fault Current Limiter with Application to an Electric Power Circuit

Speaker: José Juan Pérez-Chávez (National Autonomous University of Mexico (UNAM))

4LP7-17_Pérez-Chávez José Juan.pdf

10:28 4LP7-18 Enhancement test of Critical Clearing Time of One-machine Infinite Bus Transmission System by Use of SFCL

Speaker: Yasuyuki Shirai (Kyoto University)

4LP7-18_Shirai Yasuyuki.pdf

10:29 4LP7-19 Simulation study of the impact of superconducting fault current limiters to power grid

Speaker: Fei Liang (Bath University)

10:30 4LP7-20 Study of a Modified Flux-Coupling-Type Superconducting Fault Current Limiter for Protection of a DC Micro-Grid

Speaker: Lei Chen (Wuhan University)

10:31 4LP7-21 Characteristics of Superconducting DC interrupting system for operational reliability in the full scale converter wind turbines

Speaker: Jun-Beom Kim (Chosun University)

10:32 4LP7-22 Optimal Location of Superconducting Fault Current Limiters (SFCLs) for Fault Current Reduction in Korean AC Transmission Grids

Speaker: Jin Hur (Sangmyung University)

10:33 4LP7-23 Performance Enhancement of PMSG Wind Turbines with DC Microgrids Using Resistive-Type SFCL

Speaker: Diaa-Eldin A. Mansour (Tanta University)

10:34 4LP7-24 Analysis of Characteristics of Blocking Part for Optimized Inductor-Combined Superconducting DC Fault current limiter

Speaker: Seonho Hwang (Chosun University)

10:15 → 12:15 Poster : 4MP1 - Fe-Based

10:15 4MP1-01 Pulsed Laser Deposition of Fe-based superconductor thin films with 355nm Nd:YAG laser

Speaker: Sven Meyer (Karlsruhe Institute for Technology)

10:16 4MP1-02 Investigation of dimensional dependent electronic properties in tetragonal iron chalcogenides

Speaker: Ekaterina Kozlyakova (Lomonosov Moscow State University, Moscow, Russia)

10:17 4MP1-04 Phase separation and microstructure in superconducting FeSe1-xTex materials

Speaker: Andrea Masi (ENEA - Università Roma Tre)

4MP1-04_Masi.pdf

10:18 4MP1-05 Superconducting properties of (Ba,Na)Fe2As2 powder-in-tube wires and tapes

Speaker: Shoko Itou (Department of Physics, Tokyo University of Science)

10:19 4MP1-06 Production of silver added bulk FeSe material by ball-milling technique

Speaker: Furutani Kouichi (Shibaura Institute of Technology)

10:20 4MP1-07 Deposition and properties of Iron-Chalcogenide Fe(Se,Te) film

Speaker: Antonella Mancini (ENEA)

10:21 4MP1-09 On The Nature Of Unusual Microwave Response Of Thin FeSe1-xTex Film Near Critical Temperature

Speaker: Guoqiang Li (O.Usikov IRE NAS of Ukraine)

4MP1-09_Cherpak Nickolay (Mykola).pdf

10:22 4MP1-10 Effect of post annealing on physical properties of BaFe2As2-based superconductors

Speaker: Shigeyuki Ishida (AIST)

10:23 4MP1-13 Structure and superconducting properties of oxypnictide thin films by molecular beam epitaxy

Speaker: Sandra Kauffmann-Weiss (Karlsruhe Institute of Technology (KIT), Institute for Technical Physics (ITEP))

10:24 4MP1-15 Can topological transitions be exploited to engineer intrinsically quench-resistant wires?

Speaker: Jorge Quintanilla (University of Kent)

10:15 → 12:15 Poster : 4MP2 - MgB2 2/2

10:15 4MP2-01 Development status of MgB2 superconducting wires at KAT

Speaker: Sehoon Jang (KAT)

10:16 4MP2-02 Jc-B-T properties of MgB2 film on Cu tape

Speaker: Takumu Iwanaka (Hitachi, Ltd)

4MP2-02_Iwanaka Takumu.pdf

10:17 4MP2-03 Properties of Critical Current and Normal Zone Propagation of Multi-filamentary MgB2 Superconducting Wire Cooled by Liquid Hydrogen

Speaker: Katsuyuki Fujita (Kyoto University)

4MP2-03_Fujita Katsuyuki.pdf

10:18 4MP2-04 A comparative study of new Ge-based additions to MgB2

Speaker: Dan Batalu (University POLITEHNICA of Bucharest)

4MP2-04_Batalu Dan.pdf

10:19 4MP2-05 Improvement of MgB2 superconducting properties acting on boron precursor by freeze-drying process

Speaker: Gianmarco Bovone (SPIN Institute)

10:20 4MP2-06 MgB2 superconductors produced by Encapsulated Nano Boron with two different magnesium sources

Speaker: Serap Safran (ANKARA UNIVERSITY)

10:21 4MP2-07 Enhanced properties of bulk MgB2 fabricated by an excess Mg method for applications

Speaker: Ercan Ertekin (Ankara University)

10:22 4MP2-08 Open-ends and closed-ends powder-in-tube tapes of MgB2 processed by spark plasma sintering

Speaker: Gheorghe Virgil Aldica (National Institute of Materials Physics)

10:23 4MP2-09 Persistent Current Operation of MgB2 Coils with Superconducting Joints of Reacted Wires

Speaker: Yota Ichiki (Hitachi, Ltd.)

4MP2-09_Yota_Ichiki.pdf

10:24 4MP2-10 Properties of ex-situ MgB2 bulk samples prepared by uniaxial hot pressing

Speaker: Wolfgang Häßler (Leibniz-Institut for Solid State and Materials Research (IFW) Dresden)

10:25 4MP2-12 Structure and properties of MgB2 bulks, thin films and wires; effect of TiO2 and TiC additions

Speaker: Tetiana Prikhna (Institute for Superhard Materials of the National Academy of Sciences of Ukraine)

4MP2-12_Prikhna Tetiana.pdf

10:26 4MP2-13 Superconducting MgB2 processed by Spark Plasma Sintering for different pulsed current patterns

Speaker: Petre Badica (National Institute of Materials Physics)

10:15 → 12:15 Poster : 4MP3 - Basic Properties

10:15 4MP3-01 Modelling the Critical Current of Surfaces and Grain Boundaries in Superconducting Films at High Magnetic Fields

Speaker: Alexander Blair (Department of Physics)

4MP3-01_Blair Alexander.pdf

10:16 4MP3-02 Reversible Superconducting Diodes Using Rectified In-plane Vortices in Asymmetrically Multilayered BaHfO3-doped SmBa2Cu3Oy Films

Speaker: Yuji Tsuchiya (Nagoya Univ.)

10:17 4MP3-03 Extraction of the complex resistivity and pinning parameters from microwave surface impedance measurements of coated conductors

Speaker: Nicola Pompeo (Dipartimento di Ingegneria, Università Roma Tre)

10:18 4MP3-06 Superconducting Properties of Endohedral Gallide Cluster Based Mo8Ga41 superconductor

Speaker: Prakriti Neha (Jawaharlal Nehru University)

10:19 4MP3-07 On the origin of critical temperature enhancement in atomically-thin superconductors

Speaker: Evgeny Talantsev (Robinson Research Institure, Victoria University of Wellington)

10:20 4MP3-11 Presents the results of testing to achieve superconducting temperature

Speaker: Sadeq Kazemifard (fard technology)

10:15 → 12:15 Poster : 4MP4 - Measurement Techniques 2/2

10:15 4MP4-01 High current probe for gas flow Ic(B,T) measurements with ±0.01 K temperature precision: HTS current leads and active temperature compensation system

Speaker: Christian Barth (University of Geneva, Department of Quantum Matter Physics)

4MP4-01_Barth Christian.pdf

10:16 4MP4-03 Contactless verification of defects in 2G HTSC tapes with two-side superconducting layers

Speaker: Igor Rudnev (National Research Nuclear University MEPhI (Moscow Engineering Physics Institute))

10:17 4MP4-04 Finite Element Calculation of the Critical current and Magnetic "Levitation" Force between a Permanent Magnet and a ZFC YBaCuO Sample in Mixed State

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

4MP4-04_Neves Marcelo.pdf

10:18 4MP4-05 Critical Current Density Transport Measurements on ITER Poloidal Field NbTi Strands from 3.5 to 8.0 K, in magnetic fields up to 8.0 T, using a Bespoke Probe

Speaker: Mark Raine (Durham University Department of Physics)

10:19 4MP4-06 Study of Precursor Solution Used For YBCO Films Chemical Solution Deposition: Solution Reactivity and Effects on Film Properties

Speaker: Valentina Pinto (ENEA)

10:20 4MP4-07 Investigation of REBCO Roebel Cable Irreversible Critical Current Degradation Under Transverse Pressure

Speaker: Jaakko Murtomäki (CERN)

4MP4-07_Murtomäki Jaakko.pdf

10:21 4MP4-08 International round robin test on critical current measurement of RE-Ba-Cu-O (RE=rare earth) superconducting tapes

Speaker: Gen Nishijima (National Institute for Materials Science)

4MP4-08_Nishijima Gen.pdf

10:22 4MP4-09 Simple Method to Fabricate Intrinsic Josephson Junction Device by Using Water-treatment Process

Speaker: Hiromi Tanaka (National Institute of Technology, Yonago College)

10:23 4MP4-10 Magnetic study of Nb micro-ring using attonewton-sensitivity dynamic cantilever magnetometer

Speaker: Jae-Hyuk Choi (Korea Reserach Institute of Standards and Science)

10:24 4MP4-11 The interfacial thermal surface resistivity between the Nb-Ti filaments and the matrix in High-field multifilamentary composite wires

Speaker: Francis Ridgeon (Durham University)

10:25 4MP4-12 Research on Non-destructive Examination of bracket welds ITER In-Vessel Coils (IVC)

Speaker: Xiaochuan Liu (Institute of Plasma Physics Chinese Academy of Sciences)

4MP4-12_Liu Xiaochuan.pdf

10:15 → 12:15 Poster : 4MP5 - Cuprate Thin Films 2/2

10:15 4MP5-01 Ex-situ liquid assisted growth of GdBa2Cu3O7-δ films on Hastelloy metal substrates

Speaker: Oleksiy Troshyn (THEVA Dünnschichttechnik GmbH)

10:16 4MP5-02 Optimization of novel melt-growth heat treatment of YbBa2Cu3O7-δ / Ag tapes

Speaker: Hongyi Qu (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:17 4MP5-04 Surface Decoration as Prospective Artificial Pinning Strategy in Superconducting YBa2Cu3O7-x films

Speaker: Laura Piperno (Engineering Department, Roma Tre University)

4MP5-04_Piperno.pdf

10:18 4MP5-05 Low temperature fabrication of crack free GdBa2Cu4O8 films on oxide seed layer by molten hydroxide flux method

Speaker: Keisuke Soeda (shimane university)

10:19 4MP5-06 Nanodiamond: a New Tool for Artificial Pinning Center introduction in YBCO Films obtained through Chemical Solution Deposition

Speaker: Valentina Pinto (ENEA)

10:20 4MP5-07 Laser Modification of 2G-HTS Tapes Surface

Speaker: Neslihan Turan (Gazi University, Ankara, Turkey)

4MP5-07_Turan Neslihan.pdf

10:21 4MP5-08 Enhancement of superconducting properties for low-temperature LPE-REBa2Cu3Oy films via phase decomposition process in various RE elements

Speaker: Shuhei Funaki (Shimane University)

10:22 4MP5-09 Fabrication of YBCO Superconducting Film on {100} Textured Cu Tape via Conductive Buffer Layers

Speaker: Toshiya Doi (Kyoto University)

10:23 4MP5-10 Investigation on the Superconducting Properties of YGBCO/STO/YGBCO Tri-layer

Speaker: Yanjie Yao (Key laboratory of Artificial Structures and Quantum Control, Shanghai Jiao Tong University)

4MP5-10_Yao Yanjie.pdf

10:24 4MP5-11 Eutectic temperature determination of the BaO-CuO-O system in bulk and in films

Speaker: Silvia Rasi (Universitat de Girona)

10:25 4MP5-13 Flux pinning properties of Hf and Zr-doped Bi,Pb-2223 thin films with columnar defects

Speaker: Akiyoshi Matsumoto (National Institute for Materials Science)

10:26 4MP5-14 Microstructure and superconducting properties of impurity doped Bi,Pb-2223 thin films fabricated sputtering method

Speaker: Akiyoshi Matsumoto (National Institute for Materials Science)

10:27 4MP5-15 Control on phases formation in melt processed (Bi,Pb)-Sr-Ca-Cu-O samples due to Ag and PbO additions

Speaker: Marcelo Neves (LMDS / UFRRJ (Universidade Federal Rural do Rio de Janeiro))

4MP5-15_Neves Marcelo.pdf

10:28 4MP5-16 Microstructure and Current Transport of Tl-1223 Thin Film Superconductors

Speaker: Sigrid Holleis (Atominstitut, TU Wien)

4MP5-16_Holleis.pdf

10:29 4MP5-17 Characterization of electrospun BSCCO nanowires with reduced preparation temperature

Speaker: Michael Koblischka (Saarland University)

10:30 4MP5-18 Assessment of Bi2Sr2CaCu2O8 Thin Films Grown by MOCVD for Power Electronics Applications

Speaker: Kazuhiro Endo (Kanazawa Institute of Technology)

10:31 4MP5-21 Growth of epitaxial YBCO double films derived from solution deposition

Speaker: Lihua Jin (ShaanxiRare Metals Science and Industry Group Co., Ltd.)

10:15 → 12:15 Poster : 4MP6 - Strain, Irradiation, Thermal Properties

10:15 4MP6-01 Evaluation of actual delamination strength of REBCO coated conductors based on the Weibull analysis considering size effect

Speaker: Shogo Muto (Fujikura Ltd.)

10:16 4MP6-02 Thermal stability of commercially available coated conductors

Speaker: Alan Preuß (Karlsruhe Insitute of Technology)

4MP6-02_Preuß Alan.pdf

10:17 4MP6-03 Unusual thermal properties of nonsuperconducting PrBCO ceramics at low temperatures

Speaker: Mahieddine Lahoubi (Badji-Mokhtar Annaba University, Faculty of Sciences,)

10:18 4MP6-04 Thermal conductivity and dilatation of a Bi-2223/Ag (DI-BSCCO) superconducting wire laminated with Ni-alloy tapes

Speaker: Yuichi Yamada (Iwate University)

4MP6-04_Naito Tomoyuki.pdf

10:19 4MP6-05 Investigation of light-weight material of cryogenic pipe for aviation application

Speaker: Masae Kanda (Chubu University)

10:20 4MP6-06 Development of High-Strength BSCCO-2223 Tapes

Speaker: Kozo Osamura (Research Institute for Applied Sciences)

10:21 4MP6-07 Application of DIC to extract full field stress-strain data of superconducting coils under thermal contraction

Speaker: Jorge Pelegrin (University of Southampton)

4MP6-07_Bailey Wendell.pdf

10:22 4MP6-08 Strain effect on quench characteristics of YBCO Coated Conductor

Speaker: Jiangtao Shi (Southwest Jiaotong University)

4MP6-08_Shi Jiangtao.pdf

10:23 4MP6-09 Structural modelling of REBCO CC tapes in TORT cables

Speaker: Eva Michalcová (Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava)

4MP6-09_Michalcová Eva.pdf

10:24 4MP6-10 Bending-peeling method to measure interface strength of YBCO tape

Speaker: Peng Jin (Institute of Electrical Engineering, Chinese Academy of Sciences)

10:25 4MP6-11 Delamination strength testing of commercial ReBCO tapes: climbing drum peel testing

Speaker: Nicholas Long (Victoria University of Wellington)

4MP6-11_Nicholas Long.pdf

10:26 4MP6-12 Effect of mechanical loading on high temperature superconducting tapes during bending of round cables

Speaker: Marcela Pekarčíková (Slovak University of Technology in Bratislava)

4MP6-12_Pekarčíková Marcela.pdf

10:27 4MP6-13 Mechanical and thermal properties of All-CSD-YBCO superconducting tapes and joints

Speaker: Michael Baecker (Deutsche Nanoschicht GmbH)

10:28 4MP6-14 Electrical and Strain Behaviors of Solid Nitrogen and Conduction Cooled YBCO Coil under Thermal Disturbance and Overcurrent Pulse

Speaker: Liyuan Liu (Southwest jiaotong university)

4MP6-14_Liu Liyuan.pdf

10:29 4MP6-15 Ion-irradiation effect of microwave surface resistance of YBa2Cu3Oy thin films in magnetic field

Speaker: Shigetoshi Ohshima (Yamagata University)

10:30 4MP6-16 Effect of neutron irradiation on critical currents of some REBaCuO superconducting tapes considered for magnets of fusion reactors

Speaker: Miloš Jirsa (Institute of Physics CAS)

poster 4MP6-16.pdf

10:15 → 12:15 Poster : 4MP7 - Coated Conductors 2/2

10:15 4MP7-02 Ic survival of the delaminated coated conductor and its potential application in superconducting joint

Speaker: Feng Feng (Tsinghua University)

4MP7-02_Feng Feng.pdf

10:16 4MP7-03 Thick YBa2C3O7-x layers with ink jet printing single deposition

Speaker: Bohores Villarejo (ICMAB - CSIC)

10:17 4MP7-04 Electro-mechanical property of YBCO coated conductors lap joint under multi-fields

Speaker: Xingyi Zhang (Lanzhou University)

10:18 4MP7-05 Long length inkjet-printed solution deposition planarization layers for 2G-coated conductors

Speaker: Marta Vilardell (OXOLUTIA S.L.)

10:19 4MP7-06 Manufacturing Process Upgrade and New Research Directions at SuperOx Japan

Speaker: Valery Petrykin (SuperOx Japan)

10:20 4MP7-07 Microstructures of Conductive Buffer Layers for YBCO Coated Conductors Using Cube-Textured Cu Tapes

Speaker: Ataru Ichinose (Central Research Institute of Electric Power Industry)

10:21 4MP7-08 Electrical and mechanical behavior of electrical, Pb- and Cd-free, joints with normal- and superconducting materials at low temperatures

Speaker: Katrin Bäuml (Schneider Electric Sachsenwerk GmbH)

4MP7-08_Bäuml Katrin.pdf

10:22 4MP7-09 Measurement at 4 K of normal zone propagation velocity in commercial REBCO conductors

Speaker: Maxime Matras (CERN)

4MP7-09_Matras Maxime.pdf

10:23 4MP7-10 Transport Current Characteristics with Material Properties of the Outer Layer of REBCO 2G Wire Having Composite Structure Using RF Sputtering Deposition Method

Speaker: Ho Ik Du (Chonbuk National University)

10:24 4MP7-11 Evaluation on Properties of YBCO tapes insulated by Electrocoating

Speaker: Han Zhang (Dongfang Electric Corporation)

10:25 4MP7-12 Fabrication and properties of aluminum alloy laminated GdBCO coated conductor

Speaker: Sang-Soo Oh (Korea Electrotechnology Research Institute)

10:26 4MP7-13 Induction soldering of coated conductor high temperature superconducting tapes with lead-free solder alloys

Speaker: Marian Drienovsky (Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava)

4MP7-13_Drienovsky Marian.pdf

10:27 4MP7-14 Quality management in production of textured templates for 2G HTS wire

Speaker: Alexey Mankevich (SuperOx)

10:28 4MP7-15 Observation of Zero Resistance in As-electrodeposited FeSe

Speaker: Aichi Yamashita (National Institute for Materials Science)

10:29 4MP7-16 Study of Growth Process for YBa2Cu3Oy Coated Conductors with BaZrO3 Flux Pinning Centers by Monitoring Electrical Conductivity

Speaker: Ryo Teranishi (Kyushu University)

10:30 4MP7-17 Interfacial shearing stress induced by flux pinning in a superconducting coated conductor long strip with transport current in a perpendicular magnetic field

Speaker: Yumei Yang (Lanzhou university of technology)

10:31 4MP7-18 Microstructure and texture of a two level undercut-profile Ni-5at.%W substrate for coated conductors

Speaker: Anders Wulff (Technical University of Denmark)

10:32 4MP7-20 PLD manufacturing of superconducting tapes

Speaker: Ralph Delmdahl (Coherent LaserSystems GmbH & Co. KG)

4MP7-20_Delmdahl Ralph.pdf

10:33 4MP7-21 The effect of BaZrO3 nanoparticles on Jc in longitudinal magnetic field for TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy wires

Speaker: Kota Hirai (Seikei University)

10:34 4MP7-22 An approach to superconducting joints between REBCO coated conductors based on chemical solution deposition

Speaker: Anke Kirchner (IFW Dresden)

12:15 → 13:15 Lunch break

13:15 → 15:30 4EO1 - Digital and Quantum Processings

13:15 4EO1-01 Recent research developments of adiabatic quantum-flux-parametron circuits technology toward energy-efficient high-performance computing

Speaker: Yoshikawa Nobuyuki (Yokohama National University)

4EO1-01_Nobuyuki Yoshikawa_Room 3+4.pdf

13:45 4EO1-02 Theory and experimental analysis of the sensitivity of an adiabatic quantum flux parametron

Speaker: Thomas Ortlepp (CIS Institut fuer Mikrosensorik GmbH (DE))

4EO1-02_Thomas Ortlepp_Room 3+4.pdf

14:00 4EO1-03 One- and Two-Bit Reversible Fluxon Logic Gates

Speaker: Osborn Kevin (U. of Maryland, USA)

14:15 4EO1-04 Coherent control of superconducting transmon qubits with an on-chip single flux quantum driver

Speaker: Leonard Jr, Edward (University of Wisconsin - Madison)

4EO1-04_Edward Leonard Jr._Room 3+4.pdf

14:30 4EO1-05 Direct Detection of Single Flux Quantum Generated in Superconducting Strip Photon Detectors

Speaker: Abe Yutaka (Yokohama National University)

4EO1-05_Yutaka Abe_Room 3+4.pdf

14:45 4EO1-06 Superconductor Electronics Fabrication Process with Self-Shunted Josephson Junctions and Kinetic Inductors

Speaker: Tolpygo Sergey (MIT Lincoln Laboratory)

4EO1-06_Sergey Tolpygo_Room 3+4.pdf

15:00 4EO1-07 Energy-Efficient Dual-Port 32-word 8-bit ERSFQ Register File

Speaker: Alex Kirichneko (HYPRES)

4EO1-07_Alex Kirichneko_Room 3+4.pdf

15:15 4EO1-08 Progress on development of an rf waveform synthesizer with quantum-based accuracy

Speaker: Manuel Castellanos Beltran (NIST)

4EO1-08_Manuel Castellanos Beltran_Room 3+4.pdf

13:15 → 15:30 4LO2 - Large Scale: Accelerator Magnets

13:15 4LO2-01 Progress and Status on LHC High Lumi project magnets

Speaker: Ezio Todesco (CERN)

4LO2-01_Ezio Todesco_Room 1.pdf

13:45 4LO2-02 ReBCO 20T+ Dipoles for Particle Accelerators

Speaker: Jeroen Van Nugteren (CERN)

4LO2-02_Jeroen van Nugteren_Room 1.pdf

14:15 4LO2-03 16 T cosθ dipole for the Future Circular Collider (FCC)

Speaker: BARBARA CAIFFI (INFN - National Institute for Nuclear Physics)

4LO2-03_Barbara Caiffi_Room 1.pdf

14:30 4LO2-04 Advances in superconducting Bi-2212 conductor and accelerator magnet development

Speaker: Tengming Shen (Fermilab)

4LO2-04_Tengming Shen_Room 1.pdf

14:45 4LO2-05 Radiation Effects in Superconducting Quadrupoles for BigRIPS In-flight Separator at RIKEN

Speaker: Kensuke Kusaka (RIKEN Nishina Center for Accelerator-Based Science)

4LO2-05_Kensuke Kusaka_Room 1.pdf

15:00 4LO2-06 First Operation of the Complete KATRIN Superconducting Magnet Chain

Speaker: Woosik Gil (Karlsruhe Institute of Technology (KIT))

4LO2-06_Woosik Gil_Room 1.pdf

15:15 4LO2-07 First experimental results on damage limits of superconducting accelerator magnet components due to instantaneous beam impact

Speaker: Vivien Raginel

20170921_VRaginel_EUCAS17_FirstExpResultsDamageLimitScMagnet.pdf

20170921_VRaginel_EUCAS17_FirstExpResultsDamageLimitScMagnet.pptx

13:15 → 15:30 4MO3 - Coated Conductor: Processing and Properties

13:15 4MO3-01 European progress toward Nanostructure engineering in coated conductors

Speaker: Anna Palau (Institut de Ciencia de Materials de Barcelona, ICMAB-CSIC)

4MO3-01_Anna Palau_Room 2.pdf

13:45 4MO3-02 Comparison of in-field transport Ic , Jc, and Fp for R&D and production ReBCO tapes

Speaker: Dmytro Abraimov (NHMFL)

4MO3-02_Dmytro Abraimov_Room 2.pdf

14:00 4MO3-03 Thick secondary phase pinning-enhanced YBCO films on technical templates

Speaker: Max Sieger (IFW Dresden)

4MO3-03_Max Sieger_Room 2.pdf

14:15 4MO3-04 Effective vortex-pinning features of YBa2Cu3O7-x films with self-assembled Ba2YTaO6/Ba2YNbO6 columnar defects, grown on ABAD-based metallic templates

Speaker: Francesco Rizzo (ENEA)

4MO3-04_Francesco Rizzo_Room 2.pdf

14:30 4MO3-05 Temperature dependence of flux pinning in REBCO coated conductors with artificial pinning centers

Speaker: Prof. Kaname Matsumoto (Kyushu Institute of Technology)

EUCAS 2017 matsumot 1.pdf

14:45 4MO3-06 Jointing Technique of Coated Conductors by Pastes Including Nano-sized Metal Particles

Speaker: Takato Machi (National Institute of Advanced Industrial Science and Technology(AIST))

4MO3-06_Takato Machi_Room 2.pdf

15:00 4MO3-07 Long Coated Conductors with Uniform and High In-field Performance

Speaker: Teruo Izumi (Advanced Industrial Science and Technology)

4MO3-07_Teruo Izumi_Room 2.pdf

15:15 4MO3-08 Chemical solution deposition growth of low fluorine thick coated conductors of YBa2Cu3O7 and YBa2Cu3O7 nanocomposites with preformed BZO nanoparticles

Speaker: Cornelia Pop (Materials Science Institut of Barcelona (ICMAB-CSIC))

4MO3-08_Cornelia Pop_Room 2.pdf

15:30 → 16:20 4P1 - Plenary 4

4P1-01_Pascal Febvre_Room 1.pdf

15:30 4P1-01 Superconducting Computing: An Energy-Efficient Quantum-Based Technology For Supercomputers

Speaker: Pascal Febvre (Université Savoie Mont Blanc)

16:20 → 16:45 Closing